Create the copy of database no ASM to ASM database to different server

Similar Questions

• Could not create the link of database of the schema of the ORA/APEX

  Hello

  I tried to create the link of database for my schema oracle on my localhost and it brings me an error "database user has sufficient privileges for the proposed operation.". I don't know what the problem is?

  This pattern of localhost was created for APEX.

  Thank you

  I tried to create the link of database for my schema oracle on my localhost and it brings me an error "database user has sufficient privileges for the proposed operation.". I don't know what the problem is?

  This pattern of localhost was created for APEX.

  What is developer Sql has to do with the problem? This forum is ONLY for sql developer questions.

  If this isn't a problem with Sql developer please mark ANSWERED thread and repost it in the general forum of the database

  Database General Discussions

  The exception is you say the problem: the user you are using to create the DB link doesn't have the necessary privileges to create the DB link type you are trying to create. Privileges are required on the source and target databases.

  When repost you, you will need to provide:

  1. your full 4 DB for DBs source and target text segment

  2. a copy OF the sql * plus (or other) session you use to create the DB link

  3. information on the user that you use to create the link DB - including the privileges that have been granted to this ulser

  4 information on the type of link DB you try to create

• Get the FS-10260 10794 FS FS-10495 error to create the integrated safety database

  Hello
  
  When I try to create the example of integrated security of Oracle database manager. But when it tells me error, below
  
  Versions: client = 3.4.1 3.4.2 OS = Server =
  
  Operation: Creation of database 'Failsafe_DB' example on the node 'WIN1.
  Departure time: July 14, 2010 22:55:15
  Elapsed time: 0 minutes, 7 seconds
  
  1 22:55:15 introduction of clusterwide
  2 22:55:16 FS-10905: WIN1: from the creation of a stand-alone resource Failsafe_DB
  3 22:55:16 FS-10371: WIN1: perform initialization processing
  4 22:55:16 FS-10371: WIN2: run the initialization processing
  5 22:55:17 FS-10374: WIN1: collection of cluster information required to perform the specified operation
  6 22:55:17 FS-10374: WIN2: collection of cluster information required to perform the specified operation
  7 22:55:18 FS-10375: WIN1: analysis of the cluster information required to perform the specified operation
  8 22:55:18 FS-10378: WIN1: preparation for the configuration of Failsafe_DB resources
  9 22:55:18 FS-10906: WIN1: creation of the independent resource
  10 22:55:18 > FS-10635: created the file c:\oracle\ofs_1\fs\fssvr\sample\Fs_Var.ora
  11 22:55:18 > FS-10368: appeal to the SCW database to create the database example; This will take a few minutes...
  12 22:55:22 * ERROR: FS-10260: failure of the attempt to create database example autonomous Failsafe_DB
  13 22:55:22 > FS-10367: check the logs at C:\OraHome\cfgtoollogs\dbca\OFS1 for more details
  14 22:55:22 * ERROR: FS-10794: the Oracle database resource provider could not create the stand-alone resource Failsafe_DB
  15 22:55:22 * ERROR: FS-10890: Oracle Services for MSCS failed during the createStandalone operation
  16 22:55:22 * ERROR: FS-10497: from clusterwide canceling the operation
  17 22:55:22 FS-10488: WIN1: from decrease in price of the operation
  18 22:55:22 FS-10489: WIN1: completed the restoration of the functioning
  19 22:55:22 * ERROR: FS-10495: Clusterwide canceling the operation is completed
  20 22:55:22 clusterwide failed!
  
  Here, I describe what I've done,
  
  Configured the 2 node clusters in Windows Server 2008. (using Oracle VM)
  Installed Oracle failsafe 3.4.2 (on private drive)
  Installed Oracle 11.1.0.6.0 (on private drive)
  Service Oracle for MSCS is running.
  
  Now, I do not understand why the creation of the example database fails?
  
  If anyone knows about this problem, then please post a comment...
  
  Kind regards
  Manish

  Hi manish;

  Please check:

  FS-10726 when you add a database to a group of integrated security [124664.1 ID]
  OERR: FS-10495 Clusterwide reduction in the price of the operation was completed [70458.1 ID]
  Bug 5770080: CREATE the EXAMPLE of DATABASE FAILS WITH 10.2.0.3.0

  For your error checking which i belive will not help so mch, but please check
  OERR: FS-10794 resource %s provider could not create the stand-alone resource %s [137861.1 ID]
  OERR: FS-10260 attempt to create database example of standalone %s failed [50840.1 ID]

  Please also visit:
  Oracle® Fail NotesRelease release 3.4.1 for Microsoft Windows
  http://download.Oracle.com/docs/CD/E10736_01/doc/Relnotes.341/e10719/TOC.htm

  Respect of
  HELIOS

• GRAB THE COPY OF DATABASE OF ORACLE 11G FROM SOURCE TO DESTINATION

  Dear Experts,

  I just want to practice disaster to start database on the destination server by copying the files in data/files of the server source control.

  I use 2 clients (windows 7 Professional) as a source server and the destination server. Database is Oracle 11 g.

  I copied all the files from the source to the destination server server and created the directory according to the settings files. I restarted tnslistener on the destination server, but the database service is not registered with the listener.

  What I would do to a maximum of database on the destination server.

  Thanks in advance for instructions.

  Cecile

  VISHWAKARMAPARDEEP wrote:

  Dear Experts,

  I just want to practice disaster to start database on the destination server by copying the files in data/files of the server source control.

  I use 2 clients (windows 7 Professional) as a source server and the destination server. Database is Oracle 11 g.

  I copied all the files from the source to the destination server server and created the directory according to the settings files. I restarted tnslistener on the destination server, but the database service is not registered with the listener.

  What I would do to a maximum of database on the destination server.

  Thanks in advance for instructions.

  Cecile

  Since it's Windblows, you will need a Windows service for the instance database.  I do not see in your list of steps that you created a.  Google "oradim.

• create the back-end database and use forms to enter data

  Good day "" I am new to Oracle. I need to create a database backend from scratch and use the (scoring) forms to enter data.
  I downloaded Oracle forms 10 g and also Oracle 10g Express edition.
  Pls help me get started with the creation of database later can I specify the tables and use them to store the data, which came...
  Thank you...

  In general...

  > Create table for each separate feedback

  Probably wouldn't be ideal, but it would depend on the intent underlying the system under development. Using the RDBMS, with tables of related data, the layout and design of the right table (entity) is crucial.

  After relations are compries, and its checked the layout of schema (the database user (s), table) welcomes the objective underlying the system, index, table creation/loading, functions or procedures, tests, etc the boring tasks begin - and that's on the place where the fun part ceases ;)

• PRKO-3115 by creating the service of database management policies

  Hello together,

  I have a mind to Oracle RAC Cluster 12.1.0.2 two node oracle Linux 7 installed and I tried to set up a service for a shared base managed policy, also 12.1.0.2 in this style:

  [ora121@Q4DEUMSY154 ~]$ srvctl add service -db cogn12Tc -pdb cogn12T -service svc_cogn12T -serverpool spRacNodes -cardinality UNIFORM -role primary -policy AUTOMATIC -failovertype SELECT -failovermethod BASIC -failoverretry 180 -failoverdelay 5 -clbgoal SHORT -rlbgoal SERVICE_TIME -dtp FALSE -tafpolicy BASIC
  

  The CDB is cogn12Tc, the cogn12T of the PDB.

  But I get a

  PRKO-3115 : -tafpolicy option cannot be used with policy-managed service svc_cogn12T
  

  I have not found the info (DOC), where Oracle describe, TAF is not able to use by policy successful DB? Is also funny, when I create service without the option - tafpolicy can I activate the TAf by editing:

  [ora121@Q4DEUMSY154 ~]$ srvctl add service -db cogn12Tc -pdb cogn12T -service svc_cogn12T -serverpool spRacNodes -cardinality UNIFORM -role primary -policy AUTOMATIC -failovertype SELECT -failovermethod BASIC -failoverretry 180 -failoverdelay 5 -clbgoal SHORT -rlbgoal SERVICE_TIME -dtp FALSE
  
  [ora121@Q4DEUMSY154 ~]$ srvctl modify service -db cogn12Tc -pdb cogn12T -service svc_cogn12T -tafpolicy BASIC
  
  [ora121@Q4DEUMSY154 ~]$ srvctl config service -service svc_cogn12T -db cogn12Tc
  Service name: svc_cogn12T
  Server pool: spRacNodes
  Cardinality: UNIFORM
  Disconnect: false
  Service role: PRIMARY
  Management policy: AUTOMATIC
  DTP transaction: false
  AQ HA notifications: false
  Global: false
  Commit Outcome: false
  Failover type: SELECT
  Failover method: BASIC
  TAF failover retries: 180
  TAF failover delay: 5
  Connection Load Balancing Goal: SHORT
  Runtime Load Balancing Goal: SERVICE_TIME
  TAF policy specification: BASIC
  Edition:
  Pluggable database name: cogn12T
  Maximum lag time: ANY
  SQL Translation Profile:
  Retention: 86400 seconds
  Replay Initiation Time: 300 seconds
  Session State Consistency:
  GSM Flags: 0
  Service is enabled
  Service is individually enabled on nodes:
  Service is individually disabled on nodes:
  

  As you can see, TAF is at the BASIC level. What's not here?

  A big thank you and best regards,

  David

  Documentation:

  -tafpolicy {BASIC | NONE | PRECONNECT}
  

  Governed by a policy TAF (for managed by administrator databases only).

  Note: You can use PRECONNECT When you specify the -preferred and -available parameters.

• Create the RMAN backup database

  I'm a junior DBA and want to help by experts.
  
  I have complete production, including the file autobackup controlfile RMAN backup. One of the requirements is to recreate a new database using these two files (the rman bkup and controfile autobackup).
  Our environment is Windows 2003 server 64-bit.
  I have already installed the database software.
  Please guide me with the rest of the steps.
  
  Thank you
  Rahul

  After services are created and then place the backups rman bkup and controlfile in fra location (check db_recovery_file_dest), follow these steps.

  Restore automatic backup controlfile;
  bootable media;
  restore the database;
  recover the database;
  ALTER database open resetlogs;

• Create the link of database error

  Hi all
  
  I am trying to create a database link (developer both SQL and Sql * more) and I get the error ORA-00933: SQL not correctly completed command.
  
  Here is the statement:
  
  CREATE DATABASE LINK msrtp CONNECT TO msrtp_user IDENTIFIED BY 62ROLDS USING msrtp;
  
  Yes, the global database name is msrtp and I created links db without any problem.
  
  The problem, it's because the password begins with a number. I have no control on the password and can not change. I tried enclosing in single and double quotes, but it does not work. Is there one way around this other than to change the password?
  
  Oracle 10g
  
  Thank you.

  Try to put the password in quotation marks. I created a link using quotes around the password and I was able to choose to use it. With 11g and passwords case-sensitive using double quotes may be necessary at least for the mixed case passwords.

  HTH - Mark D Powell.

• Comparison of column level with different database to different server

  Hi all
  
  
  I have two database on the other server. I want to find the difference between the tables in the two tables for example same table with different column, it can happen...
  
  
  How to compare two tables column level with two differnet Server database.
  
  
  
  Thanks in advance.

  user647572 wrote:
  Hi all

  I have two database on the other server. I want to find the difference between the tables in the two tables for example same table with different column, it can happen...

  How to compare two tables column level with two differnet Server database.

  SELECT * FROM USER_TAB_COLUMNS
  LESS
  SELECT * FROM USER_TAB_COLUMNS@REMOTE
  UNION
  SELECT * FROM USER_TAB_COLUMNS@REMOTE
  LESS
  SELECT * FROM USER_TAB_COLUMNS;

• ORA-28000 account locked during the creation of database (grid with asm on standlone server infrastructure)

  My Details of the operating system environment:

  OEL 6.5 64-bit

  Database version: 11.2.0.4.

  I have set up my lab for the infrastructure of grid with ASM on Stand alone server. Everything was going well with no error. My ASM Diskgroup is mounted, State resource t crsctl shows everything online, also I can connect using sys / as sysasm, my interlocutor is up and running for ASM, creating database using DBCA it gives an error 'ORA-28000 account locked' I'm confused which account is blocked because I have not yet created a data base.  Help, please

  Thank you

  Sunil

  Hello

  Add the dba group to the oracle user.

  And try again

  Best regrads

• Failed to create the startup database

  Hi all
  
  I have tried my due diligence research on this forum, install the documentation and the web before posting, but with no luck.
  
  I have two virtual machines with VMWare Workstation 6.5. Both servers are Windows Server 2003 Enterprise Edition 32-bit. One is a domain controller and the other is an application server. I am able to install Oracle 10 G R2 Enterprise Edition based on the application server, but when it gets to the part to create the Starter it database fails with error TNS-12154: TNS: could not resolve the connect identifier specified. All of the default options have been used during the installation.
  
  After my research, I checked tsnames.ora and sqlnet.ora files. Here is the output of the two files...
  
  tsnames.ora-
  
  EXTPROC_CONNECTION_DATA =
  (DESCRIPTION =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1))
  )
  (CONNECT_DATA =
  (SID = PLSExtProc)
  (PRESENTATION = RO)
  )
  )
  
  SQLNET.ora-
  
  
  SQLNET. AUTHENTICATION_SERVICES = (NTS)
  
  NAMES. DIRECTORY_PATH = (TNSNAMES, EZCONNECT)
  
  All the troubleshooting tips that I find seem to assume that a database has already been created. How can I solve when there is still no database? In addition, it looks like the tsnames.ora and sqlnet.ora files are by default and I don't think they will have to be changed.
  
  Another recommendation was to make sure that you can test your host using the host name and the nomhote.nomdomaine. I am able to do both successfully.
  
  Any help would be greatly appreciated as I don't know what to do next. Thank you.

  user8987016 wrote:
  I installed Oracle 10 g R2 Enterprise Edition so I netca.exe and used it to configure the tsnames.ora file. I also used the net manager to configure the listener and name of network service. The part that confuses me however is that I can't even create a database initially without getting the error ORA-12154. All these requirements are before you even create a database?

  N °

  You create a database while on the computer that will host the database. You set the ORACLE_HOME advance and may disconnected the ORACLE_SID, or assign the proposed SID.

  And then you go around Networking Oracle using the ' SQLPLUS / as sysdba ", rather than"sqlplus /@db-alias AS SYSDBA", if you use ypur db - create own script.

  If you use DBCA to create the database, then you have another question. Note that the @ is the separator between the password and db-alias. If you happen to use the very secure password for SYS (on the screen of the DBCA passwords) which includes the @, DBCA will fail with a 12154 because think there a network alias and it passes the password-part Oracle Networking, which, in turn, said 'no '.

  Published by: Hans Forbrich, January 19, 2010 20:18

  An idea - if you use DBCA, try to generate the create script (an option of DBCA) but DO NOT create the database. Then after this script if it is not obvious what is the error.

• Backup impossible error 0 x 81000019. Cannot create the shadow...

  I can create backups is no longer on my computer. Whenever I try, I get the same error message.

  "A snapshot could not be created. Pleasse check "VSS" and "SPP" applications for more information event logs.
  Details: shadow enough storage to create the copy storage file or other shadow copy data. "Error code: 0 x 81000019

  I know that it says that there is not enough space, but it's not likely. This is a fairly new computer, less than a month, and the hard drive I backup a lot of storage space left (800 + Gb).

  When you save files on a computer Windows 7 may appear error 0 x 81000019 with an error message similar to the following:

  "A snapshot could not be created. Please check the event logs "VSS" and "SPP" application for more information. Details: shadow enough storage to create the copy storage file or other shadow copy data. »

  This error can occur as a result of having too many language packs for Windows installed on your computer.

  The cause is that the backup process involves the system writer who reports files in applications, installed on the machine. Where a large number of language packs installed, reported by this writer metadata file becomes huge in size and does not fit the size of 100 MB. This causes the backup to fail since there is not enough space for the creation of shadow copies. This isn't something that you can check to validate because this metadata file is created during the backup and deleted at the end.

  To resolve this issue, uninstall all unused language packs that are currently installed on your computer. You can do this by clicking Start and then typing Lpksetup.exe in the search box and then click Lpksetup.exe in the list of programs. Once the Language Pack installation starts, click on uninstall display languages. Uninstall the languages that you don't use and then restart your computer, restart the backup.

  Bobby

• create the database in ASM

  Hello
  in 10.2.0.4, I create (not ASM) database with the following script:

  CREATE DATABASE DEVLPT10
  USER SYS IDENTIFIED BY oracle
  USER SYSTEM IDENTIFIED BY oracle
  LOGFILE GROUP 1 ('/home/oracle/oracle/instances/oradata/DEVLPT10/redo1/redo01.log') SIZE 15M,
  GROUP 2 ('/home/oracle/oracle/instances/oradata/DEVLPT10/redo2/redo02.log') SIZE 15M,
  GROUP 3 ('/home/oracle/oracle/instances/oradata/DEVLPT10/redo3/redo03.log') SIZE 15M
     maxdatafiles 254
     maxinstances 8
     maxlogfiles 32
     character set WE8ISO8859P15
     National Character Set UTF8
  DATAFILE '/home/oracle/oracle/instances/oradata/DEVLPT10/noyau/system_01.dbf' SIZE 2048 
  SYSAUX DATAFILE '/home/oracle/oracle/instances/oradata/DEVLPT10/noyau/sysaux_01.dbf' SIZE 350M 
  EXTENT MANAGEMENT LOCAL
  DEFAULT TABLESPACE BIG_TBS
  DATAFILE '/home/oracle/oracle/instances/oradata/DEVLPT10/donnees/big_tbs_01.dbf'
  SIZE 200M EXTENT MANAGEMENT LOCAL 
  DEFAULT TEMPORARY TABLESPACE temp
  TEMPFILE '/home/oracle/oracle/instances/oradata/DEVLPT10/temp/temp_01.dbf'
  SIZE 150M 
  UNDO TABLESPACE undotbs1
  DATAFILE '/home/oracle/oracle/instances/oradata/DEVLPT10/undo/undotbs_01.dbf'
  SIZE 200M AUTOEXTEND ON MAXSIZE UNLIMITED;
  
  CREATE TABLESPACE BIG_TBS_IDX DATAFILE 
    '/home/oracle/oracle/instances/oradata/DEVLPT10/indexes/BIG_TBS_IDX_01.DBF' SIZE 1024M AUTOEXTEND OFF
  LOGGING
  ONLINE
  PERMANENT
  EXTENT MANAGEMENT LOCAL UNIFORM SIZE 64K
  SEGMENT SPACE MANAGEMENT MANUAL;

  Now I will create a DB in ASM. What does not change in the syntax of path of the data file?
  
  Suppose that we wish to have:
  
  + DGDATA_DB/mydb/datafile/sysaux...
  
  Thank you.

  If you do not use FIU, you must use the instance parameters DB_CREATE_ONLINE_LOG_DEST_n http://download.oracle.com/docs/cd/B19306_01/server.102/b14237/initparams045.htm#CHDCEGFH. For example:

  DB_CREATE_ONLINE_LOG_DEST_1='+DGREDO01_FSCM'
  DB_CREATE_ONLINE_LOG_DEST_2='+DGREDO01_FSCM'
  

• Create the backup of the database on the new server to RMAN

  I have a 1 - existing node RAC running 10gr 2 on Windows 2003. I am trying to create a backup of database on a new server running Windows 2008 and Oracle 10 g 2. Because the database uses ASM, I can't just copy data files. I did a full backup with RMAN and copy these files to the new server. I installed Oracle, but no database. I have put in place on the new box ASM.
  
  Can someone tell me how to use the RMAN backup to set up a backup of database on the new server? The production server is still in place and running, but we are trying to get a server backup and procedures for the use of a filler RMAN restore in the case of a scenario of recovery after disaster.
  
  PS. We use Standard edition, so Dataguard is out of the question. It would be nice, but the price is a little high.

  1 instance startup NOMOUNT.
  2 restore automatic backup SPFILE (assuming you have AUTOBACKUP CONTROLFILE set up on the main site)
  3 startup NOMOUNT with restored SPFILE
  4 restore automatic backup controlfile.
  5 MOUNT DATABASE
  6 catalogue copied backup files (CATALOGUE START WITH...)
  7 RESTORE THE DATABASE
  8 RETRIEVE THE DATABASE
  9 OPEN RESETLOGS

  http://download.Oracle.com/docs/CD/B19306_01/backup.102/b14191/rcmrecov.htm#i1007814

  Lukasz

• Duplicate database: ORA-19504: could not create the file "+ DATA1.

  Hi all

  I'm getting "ORA-19504: cannot create the file '+ DATA1' error when the active database duplication, no - ASM to ASM.» Source is 11.1.0.7 target is 11.2.0.1. Operating system is RHEL 5.5

  So far, I did as follows:

  created the password on the source and target file

  created source into the target and vice versa tns entries

  connectivity to test two-way

  set pfile on target with the following parameters:

  db_name

  = CLONE

  DB_FILES = 500

  log_file_name_convert ='/ oracle/TRN/db/apps_st/data /', "+ DATA1/database".

  db_unique_name = CLONE

  I use following command to reproduce:

  Run {}

  Configure auxname for datafile 1 to "+ DATA1;

  Configure auxname for datafile 2 to "+ DATA1;

  Configure auxname for datafile 3 to "+ DATA1;

  Configure auxname for datafile 4 to "+ DATA1;

  Configure auxname for datafile 5 to "+ DATA1;

  Configure auxname for datafile 6 to "+ DATA1;

  Configure auxname for datafile 7 to "+ DATA1;

  Configure auxname for datafile 8 to "+ DATA1;

  Configure auxname for datafile 9 to "+ DATA1;

  Configure auxname for datafile 10 to "+ DATA1;

  Configure auxname for datafile 11 in "+ DATA1;

  Configure auxname for datafile 12 to "+ DATA1;

  Configure auxname for datafile 13 to "+ DATA1;

  Configure auxname for datafile 14 to "+ DATA1;

  Configure auxname for datafile 15 to "+ DATA1;

  Configure auxname for datafile 16 to "+ DATA1;

  Configure auxname for datafile 17 to "+ DATA1;

  Configure auxname for datafile 18 to "+ DATA1;

  Configure auxname for datafile 19 to "+ DATA1;

  Configure auxname for datafile 20 to "+ DATA1;

  Configure auxname for datafile 288 to "+ DATA1;

  Configure auxname for datafile 295 to "+ DATA1;

  Configure auxname for datafile 314 to "+ DATA1;

  Configure auxname for datafile 351 to "+ DATA1;

  Configure auxname for datafile 352 to "+ DATA1;

  Configure auxname for datafile 353 to "+ DATA1;

  Configure auxname for datafile 354 to "+ DATA1;

  Configure auxname for datafile 379 to "+ DATA1;

  Configure auxname for datafile 392 to "+ DATA1;

  Configure auxname for datafile 393 to "+ DATA1;

  Configure auxname for datafile 394 to "+ DATA1;

  Configure auxname for datafile 395 to "+ DATA1;

  Configure auxname for datafile 396 to "+ DATA1;

  Configure auxname for datafile 397 to "+ DATA1;

  Configure auxname for datafile 398 to "+ DATA1;

  Configure auxname for datafile 399 to "+ DATA1;

  Configure auxname for datafile 400 to '+ DATA1;

  Configure auxname for datafile 401 to "+ DATA1;

  Configure auxname for datafile 402 to "+ DATA1;

  Configure auxname for datafile 403 to "+ DATA1;

  Configure auxname for datafile 404 to "+ DATA1;

  Configure auxname for datafile 405 to "+ DATA1;

  Configure auxname for datafile 406 to "+ DATA1;

  Configure auxname for datafile 407 to "+ DATA1;

  the value of newname for tempfile ' / oracle/TRN/db/apps_st/data/temp01.dbf' to '+ DATA1;

  the value of newname for tempfile ' / oracle/TRN/db/apps_st/data/temp02.dbf' to '+ DATA1;

  switch datafile;

  duplicate target database to "clone".

  active database

  pFile

  db_file_name_convert ='/ oracle/TRN/db/apps_st/data /', "+ DATA1;

  }

  Any ideas?

  Thank you

  Vinod

  A number of things.

  (1) If you're going to go to a different version of oracle, then duplicate only is not supported.

  (2) assuming that the target and the auxiliary of the versions of database is the same, you don't need all your configure auxname, set the datafile newname and switch controls.