Create the directory to the location of SD card

Similar Questions

• Create the folder on SD card

  I failed in all my attempts at creating a folder on SD card. I've read a million + 1 posts and trying most and nothing seems to work for me.

  I use file:///SDCard/BlackBerry/customfolder/ and file:///SDCard/customfolder/

  the error that is generated is the file not found

  Here is a small piece of code that I use where Globals.getAppFolder () returns one of two strings above

  I tested on 9700 (OS5 OS6), 8900, 9800

  FileConnection conn = null;
  
          try {
              conn = (FileConnection) Connector.open(Globals.getAppFolder(),
                      Connector.READ_WRITE);
  
              if (!conn.exists()) {
                  conn.setHidden(true);
                  conn.mkdir();
              }
              if (conn != null) {
                  conn.close();
                  conn = null;
              }
  
              conn = (FileConnection) Connector.open(Globals.getAppFolder()
                      + "cache/", Connector.READ_WRITE);
  
              if (!conn.exists()) {
                  if (!DeviceInfo.isSimulator())
                      conn.setHidden(true);
  
                  conn.mkdir();
              }
  
          } catch (Exception io) {
          } finally {
              if (conn != null)
                  try {
                      conn.close();
                      conn = null;
                  } catch (IOException ignored) {
                  }
          }
  

  Someone has some code to work for this or any suggestions as to what I may have done wrong

  If the code here:

  Note that you must create directories, one level at a time, so if you need create one, two, three, you create one then one/two, then one, two, three.

  public static boolean createDirectory (final String newDirectory) {}
  First make sure that the temp directory is there
  FileConnection fconn = null;
  Boolean returnFlag = false;
  try {}
  Repository.logEventInfo ("connection to the open file:" + newDirectory);
  fconn = (FileConnection) Connector.open (newDirectory, Connector.READ_WRITE);
  If (! fconn.exists ()) {}
  fconn.mkdir ();  create the file/folder, if it does not exist
  }
  fconn. Close();
  fconn = null;
  returnFlag = true;
  } catch (Exception e) {}
  String errorMessage = "error creating the directory:"newDirectory + "\n" + try (); ".
  Repository.logEventError (errorMessage);
  returnFlag = false;
  } {Finally
  try {}
  If (fconn! = null) {}
  fconn. Close();
  fconn = null;
  }
  } catch (Exception e) {}
  }
  }
  return returnFlag;
  }

• How to create the apple without credit card ID

  Hello everyone

  I am trying to create a free 5 days apple ID, then more

  and in the last step of his show me a message calls (contact support support iTunes)

  I try to do more then 5 phones and iPhone 3 and more then network but always shows me the same message

  also, I'm trying to change the country from us to the United Kingdom and another country, but still the same problem

  Please if anyone has the same problems and it is able to fix it tell me about it

  

  Click here and ask for help from the staff of the iTunes Store.

  (142118)

• Error importing metadata when you create the import profile

  Hi guys,.

  I am creating an interface to metadata (out-of-the-box) to Fusion (source) to a HFM application. I have successfully completed the following activities:

  -Registry system source

  -Configure entities accounting source

  -Initialize the source system

  -Target registry system

  -Create the import format (Fusion of application HTP) that corresponds to the account dimension in the target application the COA account segment from the source system.

  -Create the location, connected to the high import format

  -Create the metadata rule

  When I try to run the rule of metadata, it triggers the following error in the step "design EPMA import profile for dimension ERPI system profile 5:

  2015-03-09 13:04:32, 456 [AIF] INFO: [exportMetadataToEPMA: 201] end (java.lang.Exception: javax.xml.rpc.soap.SOAPFaultException: System.Web.Services.Protocols.SoapException: server was unable to process request.---> System.FormatException: input string is not in a correct format.)

  See below the FDM application log:

  2015-03-09 13:04:25, 716 [AIF] DEBUG: CommDim.getRuleInfo - END
  2015-03-09 13:04:25, 717 DEBUG [AIF]: AIFUtil.callOdiServlet - START
  2015-03-09 13:04:25, 941 [AIF] DEBUG: the registry has been found!
  2015-03-09 13:04:26, 006 INFO [AIF]: Services of EPMA Web URL: http://EPM11124V2:19000 / hyperion-bpma-Server
  2015-03-09 13:04:26, 007 [AIF] DEBUG: establishing a session now...
  2015-03-09 13:04:29, 523 INFO [AIF]: the session Id is: fa0ecc96-m-e2ee-f7be-8b8b6d0112d8
  2015-03-09 13:04:31, 305 [AIF] INFO: creation of profile import:
  2015-03-09 13:04:32, ERROR 451 [AIF]: error encountered
  2015-03-09 13:04:32, ERROR 453 [AIF]: error encountered
  2015-03-09 13:04:32, 456 [AIF] INFO: [exportMetadataToEPMA: 201] end (java.lang.Exception: javax.xml.rpc.soap.SOAPFaultException: System.Web.Services.Protocols.SoapException: server was unable to process request.---> System.FormatException: input string is not in a correct format.)

  Server stack trace:
  at System.Number.StringToNumber (String str, NumberStyles options, NumberBuffer & number, NumberFormatInfo info, Boolean parseDecimal)
  at System.Number.ParseInt32 (String s, NumberStyles style NumberFormatInfo info)
  At Hyperion.DimensionServer.Proxies.ImportsProxy.DataSourceInfoByName (Guid sessionID String dataSource)
  to Hyperion.DimensionServer.Proxies.ImportsProxy. <>c__DisplayClass1. b__0() < CreateImportProfileForApplication >
  At Hyperion.DimensionServer.Global.HandleThreadContext (Guid sessionID, method ThreadContextDelegate)
  At Hyperion.DimensionServer.BaseProxy.HandleAPICall (Guid sessionID, method ThreadContextDelegate)
  At Hyperion.DimensionServer.Proxies.ImportsProxy.CreateImportProfileForApplication (Guid sessionID, String name, description of the chain, ImportType importType, dataSourceName, index of the ApplicationLocator String)
  to System.Runtime.Remoting.Messaging.StackBuilderSink._PrivateProcessMessage (md IntPtr, Object [] args, object, Int32 methodPtr, Boolean, Object fExecuteInContext Server [] & outArgs)
  at System.Runtime.Remoting.Messaging.StackBuilderSink.SyncProcessMessage (Int32 methodPtr, IMessage msg, Boolean fExecuteInContext)

  Exception thrown once again [0]:
  at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage (IMessage reqMsg, IMessage retMsg)
  at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke (MessageData & msgData, Int32 type)
  At Hyperion.DimensionServer.Interface.IImports.CreateImportProfileForApplication (Guid sessionID, String name, description of the chain, ImportType importType, dataSourceName, index of the ApplicationLocator String)
  At Hyperion.DimensionServer.WebServices.Imports.CreateImportProfileForApplication (Guid sessionID, String name, description of the chain, ImportType importType, dataSourceName, index of the ApplicationLocator String)
  ---End of inner exception stack trace---)
  2015-03-09 13:04:32, 489 [AIF] DEBUG: AIFUtil.callOdiServlet - END
  2015-03-09 13:04:32, 498 FATAL [AIF]: error in CommDim.loadMetadata
  Traceback (most recent call changed):
  Folder "< string >", line 4185 in loadMetadata
  RuntimeError: java.lang.Exception: javax.xml.rpc.soap.SOAPFaultException: System.Web.Services.Protocols.SoapException: server could not process the request. ---> System.FormatException: input string is not in the correct format.

  Server stack trace:
  at System.Number.StringToNumber (String str, NumberStyles options, NumberBuffer & number, NumberFormatInfo info, Boolean parseDecimal)
  at System.Number.ParseInt32 (String s, NumberStyles style NumberFormatInfo info)
  At Hyperion.DimensionServer.Proxies.ImportsProxy.DataSourceInfoByName (Guid sessionID String dataSource)
  to Hyperion.DimensionServer.Proxies.ImportsProxy. <>c__DisplayClass1. b__0() < CreateImportProfileForApplication >
  At Hyperion.DimensionServer.Global.HandleThreadContext (Guid sessionID, method ThreadContextDelegate)
  At Hyperion.DimensionServer.BaseProxy.HandleAPICall (Guid sessionID, method ThreadContextDelegate)
  At Hyperion.DimensionServer.Proxies.ImportsProxy.CreateImportProfileForApplication (Guid sessionID, String name, description of the chain, ImportType importType, dataSourceName, index of the ApplicationLocator String)
  to System.Runtime.Remoting.Messaging.StackBuilderSink._PrivateProcessMessage (md IntPtr, Object [] args, object, Int32 methodPtr, Boolean, Object fExecuteInContext Server [] & outArgs)
  at System.Runtime.Remoting.Messaging.StackBuilderSink.SyncProcessMessage (Int32 methodPtr, IMessage msg, Boolean fExecuteInContext)

  Exception thrown once again [0]:
  at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage (IMessage reqMsg, IMessage retMsg)
  at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke (MessageData & msgData, Int32 type)
  At Hyperion.DimensionServer.Interface.IImports.CreateImportProfileForApplication (Guid sessionID, String name, description of the chain, ImportType importType, dataSourceName, index of the ApplicationLocator String)
  At Hyperion.DimensionServer.WebServices.Imports.CreateImportProfileForApplication (Guid sessionID, String name, description of the chain, ImportType importType, dataSourceName, index of the ApplicationLocator String)
  -End of the exception stack trace internal-

  2015-03-09 13:04:32, 568 FATAL [AIF]: error in the load metadata
  2015-03-09 13:04:32, 641 [AIF] INFO: end process FDMEE, process ID: 201

  I'm new type of debugging using FDMEE, but I am not mistaken, he finds a string where I shouldn't be finding a string somewhere in the metadata? I looked in the source system metadata, but I see not all metadata 'string. ' Could someone maybe advise and point me in the right direction on how to handle this error (which causes the error, where to look, etc.). Any help would be appreciated kindly!

  Kind regards

  Gerard

  Hello

  Looks like you might need to work on ensuring that FDMEE can talk to EPMA.

  Also take a look at the following doc:

  FDMEE: Export of metadata for EPMA fails (Doc ID 1633771.1)

• Moto EM330 - how to play the video from memory card?

  Moto EM330 for AT & T. is it possible to play a video file on this unit?  I have a memory card of 2 GB in there, it is recognized and I can play MP3s I copied in the folder "music" on the memory card.  I see there is a 'video' folder as well, so I guess that's where they would go. Important questions are 1) what is the video format will play the device? and (2) what can I select in the confusing menus to play?  I would like to convert videos I watch on this little device.  Thanks in advance - manuals are "less useful" and devoid of any technical details.

  NetLarry

  OK, possible solutions... commutation of the memory locations (one for recording a video for phone to memory card and the second to view the video of the location of memory card)

  1. ... (summary of the previous steps of validation), once your in the video menu, scroll to [New Video] press, then toward the top of the left soft key under "GO TOWARD", now, press a softkey even under OPTIONS, scroll down to the peripheral storage switch and press the soft key under SELECT, choose the location of memory... the circle/green OK checkmark , press SELECT again to check your memory location is correct, now close phone
  2. Follow the path to the menu videos , (can still view the elements of memory phone), press the central button, now the Vidéo Menu up, made show scroll to switch storage devices and enter, now switch to the memory card, press the soft key under Select, (the green circle and memory card message flashes) and takes you back to the videos on the memory card... appear to be a two stages of process to change the locations.
  3. If the above does not work, format you the memory card in this phone?
  4. Or, have connected the USB cable

  Hope this works for you this time

  Poko

  Tutorial EM330 see page 9 for additional video support

  Other users of phone on the forum has a faster shortcuts to change the locations of memory?

• oracle.as.install.engine.exception.LogInitializeException: not enough space to create the log files in the location specified in the inventory. Create a space under the null specified inventory or to point to a different directory

  Hello

  I have installed:

  -(Oracle Linux) OL 6.6

  121 GB HD

  5.0 GB RAM

  -JDK-7u80-EA-bin-b05-Linux-x64-20_jan_2015.tar.gz (Java)

  -Fmw_12.1.3.0.0_infrastructure.jar (infrastructure)

  -Fmw_12.1.3.0.0_ohs_linux64.bin (SST)

  I try to install OBIEE, I unzip these files:

  -bi_linux_x86_111170_64_disk1_1of2.zip

  -bi_linux_x86_111170_64_disk1_2of2.zip

  -bi_linux_x86_111170_64_disk2_1of2.zip

  -bi_linux_x86_111170_64_disk2_2of2.zip

  -bi_linux_x86_111170_64_disk3.zip

  I run/home/oracle/OBIEE/Disk1/runInslaller and open the screen to select the oraInventory directory, when I click OK, the error message appears (see image below):

  

  [oracle@localhost Disk1] $. / runInstaller

  Iniciando Universal Oracle install...

  Espaço Verificando Temp: deve ser superior a 1536 MB.   Passado Reais 36602 MB

  Verificando swap Espaço: deve ser superior a 500 MB.   Passado Reais 2553 MB

  Verificando monitor: deve ser configurado para exibir pelo menos 256 cores.    Reais 16777216 Passado

  2nd para iniciar o Oracle Universal Installer from/tmp/OraInstall2015-09-13_08-13-50 h Aguarde... [oracle@localhost Disk1] $ 13/09 / 2015 20:13:53 oracle.as.install.bi.util.ConsumerUIProperties getCustomPropertiesFilename

  INFO: Using a custom UI properties of the oracle/as/install/bi/config/consumer-ui.properties file

  [ERROR]: error initializing log values

  oracle.as.install.engine.exception.LogInitializeException: Espaço insuficiente para criar os log archives na Localização address para o inventario. Espaço shouts ob o inventario especificado/home/oracle/oraInventory UO aponte para outro inventario

  to oracle.as.install.engine.logging.EngineLogHelper. < init > (EngineLogHelper.java:65)

  at oracle.as.install.engine.logging.EngineLogHelper.initialize(EngineLogHelper.java:192)

  to oracle.as.install.engine.InstallEngine. < init > (InstallEngine.java:135)

  to oracle.as.install.engine.InstallEngine. < clinit > (InstallEngine.java:130)

  at oracle.sysman.oio.oioc.OiocOneClickInstaller.main(OiocOneClickInstaller.java:603)

  In English:

  oracle.as.install.engine.exception.LogInitializeException: not enough space to create the log files in the location specified in the inventory. Create a space under the null specified inventory or to point to a different directory

  What can be?

  Well, you very probably not a lot of space on the left under/Home.

  You can move to another location that is located on/home/oracle/orInventory the / partitioning of the partition where you probably have more space left if you used the default value.

  For example, as a root user:

  mkdir/U01

  MV/home/oracle/oraInventory/U01

  Update /etc/oraInst.loc and replace

  inventory_loc = / home/oracle/oraInventory

  with

  inventory_loc = / u01/oraInventory

• Error: The database file location: [INS-32012] failed to create the directory.

  Hello

  I have a problem with the installation of database 11 g 2 on OL5.

  Error:

  Location of the database file: [INS-32012] failed to create the directory.

  Although

  drwxr-xr-x 2 root oinstall 4096 Apr 9 17:56 oradata

  drwxr-xr-x 3 755 oinstall 4096 Apr 9 16:27 products

  U01/app/oracle/a 755 permission

  Thank you

  Abhishek

  chmod-r 755/U01

  chown R oracle: oinstall/U01

  the second command change the user and the group owner Of/U01 (including all subdirectories and files) for oracle and oinstall respectively.

  HTH

  Tobi

  Tobi & #39; Oracle DBA s & amp; Blog of UNIX

• Error 0 x 80070052 as it is impossible to create the directory or file

  I am copy photos in the photo gallery of a folder/tag for a scan of the disc.  I have a file of some 140 photos which does not copy.  Others have copies with no problems.   I created a folder with all the photos I want to copy.  When they begin the process, all go but those of this group in particular.  I get the above error message.  Please tell me what I would do, I succumbed to the last 1.5 hours to resolve myself.  Happy new year!!

  Kelly

  My next try to discover what was going on would be to check the location of the files. A folder root drive can contain as many files, (depending on the file system used, such as Fat32 or NTFS). I wouldn't count the number of files successfully in the root and see if you're on that, based on the constraints of the file system. When you click right a drive and properties, it shows the file in use for this drive system.

  Errors creating files or folders in the root directory:

  Messages rating helps other users

  Mark L. Ferguson MS - MVP

• Create the directory objects with the path environment variable

  I need to create a directory object and wonder if it's valid to use an environment variable in the nom_chemin?  Example:

  CREATE or REPLACE DIRECTORY XMLDIR AS ' $ORACLE_HOME/rdbms/xml ";

  I read the following in the Oracle 11.2 documentation, but it is is not clear to me if an environment variable is allowed or not.  My reason for wanting to use a variable of environment as opposed to hard coding is for when I update, I have no back reference to the old House of Oracle.

  nom_chemin

  Specify the name of the full path of the directory on the server where the operating system files are located. Single quotes are required, so that the path name is case-sensitive.

  > I see that many developers have created objects to directory with the environment variables in the path.

  Please post reproducible test

  You know & realize that the Oracle database is independent of the operating system (OS)?

  Environment variable is OS specific.

• I couln can't find the location of the directory

  I create a directory, but I can't find the location of it I mean, I do it in the place, but I do not see the directory? I did something wtong?
  
  
  create or replace directory plsql_dir as 'C:\Users\Retail\Oracle\hello ';
  
  Created PLSQL_DIR directory.
  
  
  Grant read, write on directory plslq_dir for michael;
  
  It gives
  
  SQL error: ORA-22930:
  22930 00000 - "the directory does not exist.
  
  
  Thank you

  You have created a directory of Oracle named plsql_dir pointing to 'C:\Users\Retail\Oracle\hello '.
  You must manually create the physical directory. Oracle does not create it.

  Kind regards
  Sajeeva Lacotte.

• How to create the file on a location where the user with rights?

  Hello
  I have a requirement in my application a lot of program thatcreating a report to a file and it is written in a user's location. Now he specified directly as (c:\ or d:\...).
  
  The problem is that the user does not have right to access that directory. What I suggest, or I want to create is special reports on a location where the user with rights.
  
  Essentially in Windows system % UserProfile % having right to do anyting. Assume that the operating system that is installed in C: the % UserProfile % c:\documents and Settings\nom_utilisateur or D: then D:\Document and user Settings\nom.
  
  How do I get this help please me.
  
  Good help will be appreciated.
  
  Iqbal

  Hello
  The best practice would be to create the file in My Documents for the user currently logged in windows.

  Unfortunately, you did not mention your version of forms. In an older version like 6.x it is function in the library of d2kwutil called Read_Registry in the win_api_environment section, and in the more recent versions the same availble function in the library webutil to client_ name.

  So, you can read the registry database for the current logged in user using the function mentioned above of the location next to the register.
  My Computer\HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Shell folders

  There is an entry named personal. Read the path of this entry when running while generating / record file to the customer's location and save the file in this path.

  -Clément

• My imported Google calendar has collapsed, and when I try to create a new calendar, thunderbird does not accept the location, directly copied from Google Calendar

  One day my Google calendar in you bird was not able to sync and I couldn't do anything, so I've deleted the calendar and started to try to create a new (which would be the same as the old). I followed the steps of description, but when I tried to copy the location XML of my private (from Google Calendar) calendar, the URL received a red frame and the next button remained inactive.
  I don't know what the problem is. I tried the ICalendar, but it was not good, I just couldn't change events, just seen.
  You bird 31.2.0, lightning 3.3.1 provider for Google Calendar 1.0.1

  I thank in advance

  See http://thunderbirdtweaks.blogspot.com.au/2014/10/lightning-and-caldav.html at least, in my opinion, you need to modify the mentioned hidden preference

• I am creating a book with iphoto and to insert a map with the locations, I realized, I could add the card, but not the location when I go in option

  I have created a book with iphoto and that you have inserted a card. I can't add the cities that I visited when I option

  Can someone help me

  Thank you

  What card theme you are using?  And what version of iPhoto?  Your internet connection is working?

  In iPhoto 9.6.1, you can add a location in layout mode.  Zoom in on the map and ctrl - click the location on the map, and then select 'Add Place '.

  In mode 'Options', you should be able to press the button "+" and type a name for the place. The location search pictures by name. You can also ctrl - click on the map and add the location manually.

  What happens when you try to add a place? You get an error message?

• HP Envy 14-1200 Prod # XQ103AV: "we could not create a new partition or locate an existing one. See the Setup log file.

  System - HP Envy14 - 1200 Beats Edition Notebook PC Series - product # XQ103AV.  It came pre-installed Windows 7.

  Error message "we could not create a new partition or locate an existing one.  See the Setup log file.

  appears in the new installation of Windows 8.0.

  Installation of MS Windows 8 DVD detects the hard drive OK.

  Software mini of Partition of the tool (3rd part) detects the hard drive OK.

  Windows 8 DVD software both MiniTool detects the disk partition and its OK formatted, but the error message is displayed to prevent installation.

  Here are the steps that I tried to solve the problem, but it won't work.

  1 opportunity Microsoft Windows 8 DVD diskpart to clean HD, to partition and to format... always get the same error message.

  2 opportunity Microsoft Windows 8 DVD diskpart to clean HD and partition... always get the same error message.

  3 MiniTool Partition software used to clean the HD, partition and format... always get the same error message.

  4 MiniTool Partition software used to clean HD and partition... always get the same error message.

  5 has bought a new hard drive repeat steps 1 to 4 and I got the... its error message.

  Background

  I have upgraded to Windows 8 Windows 7 and it worked for 2 months, then I upgraded to Windows 8.1.

  After that the system is being updated and restarted, the screen turn black.  So I decided to re - install Windows 8.0.

  There is no SIM card in the laptop.

  Help, please...

  I managed to do work Ok. Use Windows 8 DVD to run Diskpart

  1 delete the partition.

  2. restart the system.

  3. allow Windows 8 DVD to perform the partition and format the HD.

• Domain Services Active Directory could not create the ntds object due to dns settings look for failure on the specific domain controller

  Forest consist of 1 DC server 2003 with all fsmo and 2000 1 domain controller roles.

  Completed all questions of adprep and when I tried to promote server 2008 standard edition to a domain controller, had the error message stating that Active Directory could not create the NTDS settings for the domain active directory CN = NTDS controller

  Settings, cn is 2k8dc1, cn = servers, cn = Default First Site Name, c is Sites, cn = Configuration, dc is Marie-France, dc = com on the ad distance dc server2.amanua.com.

  To ensure that the provided network credentials have sufficient permissions

  "The DSA operation unable to act because of the failure of the dns lookup"

  The idea was to demote the 2000 machine when I completed the installation of 2008.

  Hello

  You can display the query in the link provided to improve assistance:
  http://social.technet.Microsoft.com/forums/en/categories/