Create the menu blu - ray together from scratch

Similar Questions

• I want to burn a blu - ray disc from 2014 CC PP and do not have the app yet. Is it possible to do?

  I want to burn a blu - ray disc from 2014 CC PP and do not have the app yet. Is it possible to do?

  Download CS6 yet...

• CS5 will still support the MCE Blu - ray on Mac Pro Player?

  It's basically my question:

  CS5 will still support the MCE Blu - ray on Mac Pro Player?

  It is y harly any info the hardware on the web site of Adobe support more. It's just all hype sales!  They used to tell you which disks have been supported, but now that still seems to just be an afterthought in CS5, there is not ehardware in detail everything that is taken in charge and what is not...

  This new MCE Blu - ray player looks like a wonderful solution, but only if Encore CS5 on Mac would support it.

  Thank you!

  I am positive that your Mac Pro has the connectors. The SATA cable it can be somewhat difficult if you're not comfortable deleting some parts with a screwdriver, but I found it very easy.

  Cables SATA sitting around, I had had a little long boxes on the ends of the connector forcing me to have to remove a small amount of plastic from the piece of fan housing. I think that if you buy a kit from OWC cable they include cables that are lower profile but whatever it is, it's not too bad. I just use a dremel to remove a small piece about 1 "x 1" directly above the ports. "

  Here are some instructions I found: http://www.newertech.com/downloads/nwtmpqxe32.pdf (Note: the pages in this guide are all mixed!) These guys here sell a kit that delivers these unused ports of SATA to eSATA ports.

  You will see that they have low profile cable I was referring to that and so they didn't need to cut the case fan at all. I would say just OWC (www.macsales.com), because they know what you are looking for and you can sell a kit that has the cables you need, including 4-pin-power to SATA power. I recommend you to install the two cables while you're here, so if you later decide to add another SATA drive or an SSD, you will not need to take off again. BTW, add an OCZ Vertex 2 60 GB SSd drive as my boot drive for the OS and applications has been the single most visible upgrade I did and makes the Mac Pro just smoke! Same value as I just pasted the small SSD up there in the optical Bay without a mounting kit, and it works great!

  In all honesty, theough, the external enclosure for Blu - Ray works well and is easier to access the drive, because it is now located on my desktop. If you're uncomfortable to disassemble your machine just get quadruple housing interface with the chip set Oxford 934DSB that I can guarantee you that it works out of the box. It cost $140 for the whole machine, not bad compared to the alternatives.

  The reader is this: LG WH10LS30. Looks like it's still on sale for Newegg $79 until the end of the year.

  Housing I have is the following: BYTECC ME535-Limited-BK. Another $60. The OWC, looks a lot prettier in a Mac environment but costs $40 more for the same features all in brushed aluminium.

  I've been creating and burning with yet but Roxio Toast 10 Titanium burns and the authors of the Blu - Ray just wanted to make a CD/DVD

  Good luck!

• Satellite P850 - where to get the Toshiba Blu - ray player?

  Hello

  Recently, I reformatted my p850/049 for windows 7. I tried to install the drive Blu - Ray Toshiba V1.0.3.196A, the file did not work at all and when I tried to install it manually "can't find drive in your system. Installation interrupted. On the download page, it is listed as a patch, but where can I find the original file? I have SP1 Windows 7 pro 64-bit, all date of May 24, 2013

  I found V1.0.5.110 of the American version of the Toshiba support site and this installed and play DVDs and it tries to open a Blu - Ray player, but it gets stuck on a white screen and do not play or let me do anything like scene jump or go to the menu. There is no error message complaining about the region or corrupted files or anything it just goes to a blank screen, with controls that are available, but they do nothing. As I said dvd works perfectly, just not blu - ray.

  The drive itself seems to work normally on this screen and when you try to click the button it comes up with a circle with a line through it when you try to click on the buttons as a dvd drive normal if you tried to jump by the warnings of copyright and the index of time is always a small number that is 25 seconds or more. Like he's trying to play a small segment as the section of the copyright or something.

  I tried a number of different Blu - ray discs, and none of them work. I downloaded a trial of another program of Blu - ray player and it plays Blu - Ray still those who do not work on the Toshiba drive (for the hardware works), so I'm looking for a free one that works without a watermark on the screen. It seems silly as I hoped my machine READING BLU - RAY without me having to buy software.

  Any help would be appreciated

  > I tried to install the drive Blu - Ray Toshiba V1.0.3.196A, the file did not work at all and when I tried to install it manually "can't find drive in your system. Installation interrupted.

  Yes, it is a patch file and you can not install this without a full version installed.

  But I found on the page of the Australian driver Toshiba Toshiba Video Player 5.0.0.16 - A
  Have you tried to install this application?

  On the other hand, I could recommend the use of the freeware such as VLC Player software.
  It's really great and in my opinion the best player you can get for free.

• Satellite P855-307 is not play the latest Blu - ray discs

  The Toshiba Blu - ray disc player is is more grateful or play the Hollywood movie Blu - ray discs.

  The recent Hollywood film set of Blu - ray discs in both my Pioneer HDD-Recorder/Blu-ray player and play on my PS3, it is why blu - ray discs are fine.

  Drive Blu - ray on the satellite p855 works so I can play Blu - ray movies non-Hollywood on my Satellite P855 (e.g. "in the shadow of the Moon") as well.

  This also indicates that the Toshiba Blu - ray disc player software can work, so something else is preventing the operation.

  BIOS 6.80 VICTORY
  Version of Toshiba - 1.05.207 Blu - ray disc player.
  Is Blu - ray zone B and 5 changes remain (never has been changed).

  There is no firmware update on the support site of Toshiba for the BD - ROM Pioneer BDC - TD04S.
  Satellite P855-307 runs the original OS (Win 7 HP 64-bit).

  Read the Readme to Toshiba Blu - ray disc player mentions AACS key renewal, although I don't see any way mentioned anywhere by which's made it.

  Corel WinDVD is of no assistance as a player, as well as the trial version of WinDVD 11 recognizes only Intel HD4000 graphics.

  Trial version of CyberLink PowerDVD can't read Blu - ray Disc movie Hollywood but will play non-Hollywood films such as "In the Shadow of the Moon".

  It seems you have a problem to play only some specific BD discs.

  I m not quite sure that your problem, but from my point of view it may be a problem of firmware of BD player. Unfortunately, Toshiba driver page does not only updates the firmware for the BD drive so will not be able to try a firmware update.

  I put t think there is a problem with the playback software (Toshiba Blu - ray disc player) because it seems that you are already using the last available Toshiba Blu - ray Disc version 1.0.5.207 player. If the software is already up-to-date.

  However, the freeware VLC player software/tools are supported BD disks too and play almost all formats and file standards.
  Recommend you test just to see if the problem still occurs even by using such usefulness of these tools.

• Ad Developer-Online Tutorial: creating a Contact in Dreamweaver form from scratch.

  

  Creating a Contact in Dreamweaver form from scratch
  In this tutorial we will build a contact form with Dreamweaver CS3 from scratch, our application consists of 2 pages, the first page contains the contact form and the second page contains the form submission and the thank you message. We will also use the Dreamweaver form validation behavior to validate the form. The behavior to validate form checks the contents of specified text fields to ensure that the user has entered the correct data type.

  __
  Best regards
  Waleed Barakat
  Programmer and developer online creative
  
  
  

  The code in this tutorial has a gaping security hole. Insert an email address that is unfiltered by a user input in the headers of messages is an open invitation to the email header injection attacks.

• How to create the menu on the LEFT, as in new BBM?

  Is there any sample how to create the menu on the left of the application as in the new BBM?

  As I know not - there's a good menu, context menu, top menu... but how to create left?

  It's just a TabbedPane: https://developer.blackberry.com/cascades/reference/bb__cascades__tabbedpane.html

• Everything has been done to fix the pause of 2 seconds on loop menu blu - ray?

  I created two videos for comics with ss12 mobile backgrounds menu on the home page. The video is 10 seconds and makes a loop until a choice is made. Whenever he makes a loop there is a 2 second black screen before the loop. I read many articles about it in still no solution. Has a been invented yet? How about PE?

  pre8dr

  Please consider the following to the definition for the replacement of looping video backgrounds that we discussed.

  Make your theme to the movie Menu free with built in replacement of video backgrounds

  Critical steps are in bold

  1 models 12/DVD local disk C/Program Files/Adobe/Adobe first Elements/Common/slideshow/pan and Zoom

  2. open the Pan and Zoom folder and copy the following two files on the computer's desktop

  Pan and zoom_pal_w_mm.psd

  and

  Pan and zoom_pal_w_sm.psd

  and change the names of

  zoom_pal_w_mm. PSD and video pan

  and

  zoom_pal_w_sm. PSD and video pan

  3 put these two files in a folder on the desktop named panoramic video and zoom. In this folder also have your video file that will be the video background for the main menu of your theme of the menu movie. Rename this video file to read zoom_pal_w_bg and pan video.avi or .mpg or .wmv. (I tested road with a .wmv file).

  4 get a stop on the first frame of the file image replacement video. I used a bmp file.

  5. open video pan and zoom_pal_w_mm.psd in Photoshop elements 12/12.1. Since the opening of the games of layer in the Palette layers in the file .psd is not involved, you shouldn't have Photoshop for this.

  a. replace the background layer in the Palette layers with the stop on bmp image.

  b. save the file

  6. place the video pan and zoom slideshow folder in the path.

  Models of 12/DVD local disk C/Program Files/Adobe/Adobe first Elements/Common/slide show.

  7 open first items 12/12.1 and compare the bottom of the main menu menu movie looping for what you have been doing the customization since within the project.

  As your schedule permits, we will follow your progress. All was well with my road tests of the foregoing.

  RTA

• Still ignores recent changes created when burning Blu - Ray

  Hi everyone-

  When I change the detailed underlying film Premiere project file pieces, I take care of to save.

  At the opening, still, I'm going to project window (top left label) then highlight the relevant first project File.pproj, and then click on revert to the Original.

  When I burn a DVD, yet many transcoding etc perhaps spending an hour on this (an hour on DVD hardware) before starting to write.  So, he burns the latest version of the Premiere project file.

  BUT when I burn a Blu - Ray disc, still seems to "remember" the previous version of the project file underlying first, doesn't bother to do many transcoding, etc. and after a maximum of 5 minutes he began to write the disc - which then the precedent not the latest version of the first underlying project file.

  (Either by the way, I'm in CS5 and Windows 7 and did not have problems of major software so far.)

  I understand that if I start a new project from scratch, it will be important to the latest version of the Premiere project file and I did it with success on another project where the menu is so simple to recreate it is not a problem.

  However, on THIS project, I have a complicated menu, giving access to a long (with a submenu preselection of stage) and three film projects short first and so begin a new reminder of the project file and build a whole new menu with scene selections would be a lot of hassle, that I would rather.  Simply copy the project still would probably just in me the problem of the copy.

  Anyone got any ideas?

  Thank you very much

  Jan

  To make comic books, you must change the project type to BD. the build type, Yes?

  When you see in the comic book the type of transcode is transcoded, it means that you have not restored. Change the type of project in BD, then return to this asset.

• Create a Module of Csharp/DLL from scratch?

  I want to create a module/DLL in C Sharp (Visual Studio .NET 2008) from scratch.  This module will be called from the Tools menu of the TestStand, and it will take a qualified full path of the file in the sequence class as input.  But I do not know how to start.  I took a brief look in the examples folder, but I don't see anything in Csharp.

  Is there an example I can copy?

  Y at - it a helper that will generate the stub (s) Csharp for me?

  Is there a friendly NI TestStand deity (God or goddess, I'm not picky) which will display a header/source stub file I can use?

  I don't know that you are pregnant. It of really not much to it. Simply create a c# class, which is a method you want to call from TestStand (make sure it is public). Then use the .NET adapter when you create a step (maybe a step in the Action) and step settings panel allows you to specify your Assembly and what to call it.

  I recommend that you store your code modules relative to the directory of the file in the sequence and specify this relative path for the setting code for the path module. In this way, you can move the tree of whole directories to a different drive letter or location and everything will still work.

  In addition, if you want to use the TestStand API, TestStand API interoperability assemblies are in the GAC and should appear in the list when you choose to add an assembly reference in visual studio.

  -Doug

• How to get the PE9 DVD to play on the new blue ray players?

  I upgraded to PE9 because my PE2 dvd play on my new blue ray LG or Sony players.    Unfortunately, PE9 discs do not play or the other.   How to make the disks that are going to play?   It is a real disappointment, since my goal is to change the years of family videos and make a nice set of DVD pick up and watch it with the family.   I can't believe that people that I send to the family to go including our buy a DVD player (and some of them do not work either)...

  Help?   He is not much of interest to one program editing if you cannot produce a final result for video display!

  p.s. I'm happy to do all the work around that will work... burn a file on the disk and access through the data area of the BR player?    Use another program to take the exit PE9 conversion and make it playable on dvd s... anything that works is fair game.

  Thank you

  David

  David,

  DVDs created with pre will normally play on most players, if DVD or BD. However, no DVD, or BD player is certified to play ANY disc - DVD-video or BD. They are certified only to read discs replicated in trade. Some players are better at handling serious records, than others. This ARTICLE will give you more background and some suggestions to get the best possible disc.

  In a Word, two major considerations are the brand of blank media. What brand do you use?

  Then, and although it is less important than a few years ago, the media type may play a role. What type, - R, or + R, are you using?

  Burning speed can contribute to the quality of combustion, but forwards, we limit ourselves here. Pre will be a speed of blank media, the speed factor of the burner, and then choose the highest speed. Normally, it will be OK, but when things do not work, I recommend a different workflow:

  Burn the project to the file. This will create a VIDEO_TS folder, where you choose for the Destination, which will include the necessary IFO, BUP and VOB, files. At this point, I would like to use DVD software to test the game the VIDEO_TS folder. Then, we use a burning utility, as big, free ImgBurn to do the physical burn on the disc and choose the VIDEO_TS folder (with files). Here, you can adjust the burning speed. I recommend about 1/2 down the list of possible speeds. It takes more than a few minutes, but is often the secret to burning discs with high playability.

  I'd also look on from the mfgr of the multi-lecteur. Web site and then download and install the latest firmware for this model drive.

  Once finished, test the drive in the Multi-lecteur on the computer using the DVD playback software. If it works, then the disk is fine, but could not yet be seen by a set-top player, and this is where the first two steps we just get the best possible drive.

  Good luck

  Hunt

• Problem with the drive Blue ray with windows 7

  I use an Acer Aspire 5920g with Optiarc BC-5500 ATA Device.I ve has upgraded from vista 32 bit to windows 7 32 bit and now it cannot read Blue ray disc.what can I do?

  Hi George,.

  I suggest you to use your favorite search engine to find and download any third-party application to read the blue ray discs.

   

  Warning: using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  You can also try to contact Asus support for further assistance.

  http://community.Acer.com/

  Back to us for any other questions related to Windows.

• Adobe will add an application allowing to have us create DVD and Blu - ray videos something similar at 12 Director

  I am very disappointed that Adobe gave us creative video high and dry, with the removal of still and not to find alternatives to replace.  I noticed that there are 12 Director who is appearing on the software authoring software there is a list, so I wonder whether or not that could be added to the creative cloud.  I just started to learn Premiere Pro, but now realized it's a waste of time without an application allows to go with it, as all you can do is to put your final cut on DVD and Blu - ray as a file of data instead of a video disc.  So at least that adobe can offer an application allows I go back to using Cyberlinks PowerDirector 12 Ultimate, which has the most of everything that Premiere pro has more a function of authorising officer who fails to present.   I was not able to find a copy of the cs still 6 as shown in the help pages.

  When I finished my video production I'd like to put it directly on the disc if adobe please give us a software allowing.

  Adobe decided NOT to fall again, they were FORCED to stop at the CS6 due to licensing

  -CS6 is the last reminder, see here #8 why http://forums.adobe.com/thread/1337952?tstart=0

  CS5-thru-CC body/Encore tutorial list http://forums.adobe.com/thread/1448923 can help

  -More instructions http://helpx.adobe.com/encore/kb/encore-cs6-installed-cc.html if you have a subscription

  The lower section of the above tutorial link has several links from Adobe and other information, the download of Premiere Pro CS6 CS6 Group again, and https://helpx.adobe.com/encore/using/download-library-content.html for the content of library again... and the tutorial list includes learning to use again... attention to the image in response 3 to this link - https://forums.adobe.com/thread/1516173 (photo first published by Ann Bens and reposted by Stan Jones)

  For help on using / learning again, go to https://forums.adobe.com/community/encore/content

• Lack of menu Blu Ray

  When I burn to disc, the Don t of the menu will appear. I have triyed to burn an image with the same results.

  Ann was right, that you seem to have an empty menu, even if you had the 'corporate' folder selected, if something was wrong.

  You seems to be used a "empty menu", so that may well have been a model yet.

  But I think that the problem that you describe is that your menu still works in preview mode before, but when built on an image or a disk and read, it starts with the timeline and not with the menu. Is this correct?

  The first thing to check is with a disk engraved in a blu - ray player. You see the problem here?

• How can I automate the creation of a partition from scratch for a large number of hosts?

  I would like to help with the following steps to cerate a partition scratch on all hosts that have no script, then reprot back to me which guests were to have created.

  all my ESXi hosts have a LUN to start with the space, all the boot LUN are named with the same naming that is conveiton "hostname-localstorage.

  I would like to come up with a script that will check each host in a cluster for a partition of scaratch, if it does not create the folder ".locker -hostname" on local storrage and then set the partition scratching to the new location. Then the new report to me, which is already a partition from scratch and those to whom he owed create a parition scratch to so I can plan then a good time to put the hosts with newly created partitions scratch mainenance mode and restart their.

  I glued the manual way to do it below. I'd appreciate any help anyone can give and it will be well appreciated. I try to avoid to do 1000 hours below. Thanks in advance...

  Note: Before you begin, make sure that/tmp/scratch exists. If it does not exist, create it by using the command #mkdir/tmp/scratch.
  1. Open a command prompt where the PowerCLI is installed.
  2. Connecting to host ESXi using the command:
     
     connect-viserver ESXHostnameOrIP
     
     
  3. A list of the data stores accessible by using the ESXi Host command:
     
     Get-Datastore
     
     
  4. Mount a read/write as a PSDrive data store using the command:
     
     New-PSDrive -Name "mounteddatastore" -Root \ -PSProvider VimDatastore -Datastore (Get-Datastore "DatastoreName")
     
     
  5. Access the PSDrive new using the command:
     
     Set-Location mounteddatastore:
     
     
  6. Create a directory named only for the ESXi host using the command:
     
     New-Item "DirectoryName" -ItemType directory
     
     For example:
     
     New-Item ".locker-ESXHostname" -ItemType directory
     
     
  7. Check the current value of the ScratchConfig.ConfiguredScratchLocation configuration with the command option:
     
     Get-VMHostAdvancedConfiguration -Name "ScratchConfig.ConfiguredScratchLocation"
     
     
  8. Change the ScratchConfig.ConfiguredScratchLocation configuration option, specifying the full path to the directory created in step 6, using the command:
     
     Set-VMHostAdvancedConfiguration -Name "ScratchConfig.ConfiguredScratchLocation" -Value "/vmfs/volumes/DatastoreName/DirectoryName"
     
     For example:
     
     Set-VMHostAdvancedConfiguration  -Name "ScratchConfig.ConfiguredScratchLocation" -Value  "/vmfs/volumes/Datastore1/.locker-ESXHostname"


  9. The ESXi host in maintenance mode and restart so that the configuration change to take effect.

  Mike P

  I have something similar to use the script below.

  I think you'll find that your out in there.

  $configName = 'ScratchConfig.ConfiguredScratchLocation'
  
  $mode,$warn = Get-PowerCLIConfiguration | %{$_.DefaultVIServerMode,$_.DisplayDeprecationWarnings}Set-PowerCLIConfiguration -DefaultVIServerMode "Multiple" -DisplayDeprecationWarnings:$false
  
  Get-VMHost | where {$_.ExtensionData.Config.Product.ProductLineId -eq "embeddedEsx"} | %{    Connect-VIServer -Server $_.Name -User root -Password MyPswd    $scratch = (Get-VMHostAdvancedConfiguration -VMHost $_)[$configName]    $tgtName = ".locker-" + $_.Name.Split('.')[0]    if($scratch -notmatch ($tgtName + "$")){        $ds = Get-Datastore -VMHost $_ | where {$_.Name -match "localstorage"}        if($ds){            Set-Location -Path $ds.DatastoreBrowserPath            New-Item $tgtName -ItemType directory            Set-VMHostAdvancedConfiguration -Name $configName -Value ('/vmfs/volumes/' + $ds.Name + '/' + $tgtName) -Confirm:$false            Set-VMHost -VMHost $_ -State 'Maintenance' -Confirm:$false            Restart-VMHost -VMHost $_ -Confirm:$false            Set-VMHost -VMHost $_ -State 'Connected' -Confirm:$false        }    }    Disconnect-VIServer -Server $_.Name}
  
  Set-PowerCLIConfiguration -DefaultVIServerMode $mode -DisplayDeprecationWarnings:$warn
  

  It uses the DatastoreBrowserPath that Vitali has suggested.