Still ignores recent changes created when burning Blu - Ray

Similar Questions

• Still crashes when burning blu ray to disk image

  I created a disk image of 15,88 GB blu ray and with success (after several tries) burned a nice blu ray player, then when I try to burn another disc by importing the disk image, the grip of the software after burning several hundred MB, making the disc useless, and I have to force leave again to escape.  Advice in why I get this conflict?

  Switched to Toast for burning.  Thanks for your help Stan.

• Error 'Could not create ac3' when burning Blu - ray

  I spent the last week, a reader Blu - ray in Encore CS5 design.  Combustion, they gave me the error message "Cannot create"_sessionfiles_Dsf_session_1_audio.ac3", and the burn failed (after going to seven hours).  I don't really know even where to start with this.  The Blu - ray is about 80% of the full (20 GB) and includes several chronologies and several menus (including audio).  No pop ups.  It should be a fairly simple project.  However, it gave me problems after the problem and has taken far too long.  Can anyone offer insight before I spend another week chasing the problem?  Thank you.

  Congratulations and condolences then!

  Either the burn was bad (the inability to check), in which case a reburn could fix, or you have a navigation problem, in which case you will need to fix this.

  You can navigate through the menu of the specific aspects? The action of the end of the scenario for the main movie is clearly defined in the menu special functions? In preview, but still on the main timeline, click the icon for "end action"; that works correctly?

  You can also try to play the image, and see if it behaves correctly (again showing a bad burn). The problem with this is that a) have you usually mount the image and b) some software players emulate correctly and a failure doesn't mean much. But if it plays properly, it indicates a bad burn.

  What third-party burning software has failed?

• Qosmio F60 - error when burning Blu - ray discs

  I have a Qosmio F60

  Recently, I tried to burn my data on BD - R 25 gb disc. Aftre burn about 6 GB of data, it stopped burning with unexplained error. I tried another disc with the same problem. This time the suggested message updated firmware. This is MY * A BD - MLT uj240ES blue ray player. I am unable to find any updated firmware update. Current firmware is version 1.10.

  Can someone help me on this

  Hey,.

  If a firmware update is available, you can find it on the official website of Toshiba:
  http://EU.computers.Toshiba-Europe.com

  If this isn't the case, you already have the latest version of the firmware.

  In your case, I recommend to test different brands of blu - ray discs. I have good experiences with Verbatim and TDK discs.
  Check this box!

  By the way: I prefer a backup of the data on an external HARD drive. It of safer and easier! ;)

• Create and burn blu - ray?

  This program's author (menus, chapters) and burn to blu - ray discs?

  Yes - assuming you have a BluRay burner, of course.

• Still freezes when the Blue Ray project tyrying

  I'm doing my first burn Blu Ray and am having some problems...

  I have my images and uses Dynamik Link to send to yet... when options still to come, here is what I have chosen.

  I move on to Blue Ray... change the size of 1920 x 1080, because that's what my videos were shot in

  I leave as MPEG 2 and let the pace to 29.97

  I do not touch the advance settings that are currently in the transcoding 15.0 Mbps... Digital audio transcoding Dolyb

  then it won't let me change the player... Adobe Reader

  I click OK and it brings my project in again... the only thing that's begins on page generate and he put on DVD by saying I used 3.78 GB... I have an hour of footage, so this is not normal.  I'm going to change to Blu Ray on the generation and it freezes everything on my computer.

  I have a decent up... all plenty of space and food.  Any thoughts?   I need this for mother's day.  :]

  Yet Roxio component problem http://forums.adobe.com/thread/400484?tstart=0
  More and Roxio http://forums.adobe.com/thread/528582?tstart=0 or directly to
  http://KB.Roxio.com/search.aspx?url=/content/KB/General%20Information/000070GN¶ms

  Long File Names Cause crashing http://forums.adobe.com/thread/588273

  Yet tutorial http://www.precomposed.com/blog/2009/05/encore-tutorial/

• When a Blu - Ray burning are all selected by default different regions?

  When a Blu - Ray burning are all selected by default different regions?

  By selecting a region in Encore for Bluray has no effect, then Yes.

• HP Pavilion Elite HPE - 480t computer and burner blu - ray 12 x HP bd 340i

  Model bd340i in the middle of last year, I bought HP 12 x Blu - Ray burner. When I bought my HP Office in December 2010 model HP Pavilion Elite HPE - 480 t, I installed the burner and everything worked very well. Today, I tried to burn a blu - ray disc, and he returned with can't read media, which stood on imgBurn. So I tried the same thing on the burner systems, and she came back as no drive in the status bar. I have also tried burning CyberLink software and the same thing no disc.

  I then tried to play the two store bought and home made blu - ray disc and could not read media. I was ready to blame it on a bad burner but then I tried a regular DVD the two store bought and done House, and it plays very well. I then tried to burn a single dvd double layer with all the burning software three I have and it is still fine, no problem. It's just the blu - ray media that cannot be read or written. The only supports blu - ray, I used from the first day was Kodak and never had a problem. That's what baffles me.

  At this point, I don't know if it's a hardware or software problem with the computer or burner blu - ray or both. 3 different burning programs works fine on DVD but not blu - ray, DVD plays fine but can't play or burn blu - ray discs.

  Could this laser blu - ray crapped out and the dvd reading and writing laser still works?  Must a blu ray burner still lasers for both media (DVD and Blu Ray)?

  Everything else with the computer works fine. I even tried uninstalling and reinstalling and it is the same, I tried to update the drivers and firmware on your site and still does not work. Please help.

  When did you purchase your product? : December2010
  Product HP Pavilion Elite HPE - 480t CTO desktop PC
  Select a problem area: other
  What is your serial number (SN): [personal information deleted]
  What is your operating system? : Microsoft Windows 7 Home Premium 64
  Your computer is unable to work with Accessories products? Please select all the boxes. other
  What type and brand of CD/DVD media you are using? Kodak 25gig of Bu-Ray and dvd HP
  The CD/DVD writer burner was built in the computer when you bought it? NO.
  You hear the sound from the speakers connected?
  The display on the product seems to work correctly? Yes
  Have you connected the product to your TV, DVD player or a music system? NO.

  If there is an error message, please specify: cannot read media
  Description of the problem: I bought burner HP 12 Blu - Ray model bd340i in the middle of last year. When I bought my HP Office in December 2010 model HP pavilion Elite HPE - 480 t, I installed the burner and everything worked very well. Today, I tried to burn a blu - ray disc, and he returned with can't read media, which stood on imgBurn. So I tried the same thing on the burner systems, and she came back as no drive in the status bar. I have also tried burning CyberLink software and the same thing no disc. I then tried to play the two store bought and home made blu - ray disc and could not read media. I was ready to blame it on a bad burner but then I tried a regular DVD the two store bought and done House, and it plays very well. I then tried to burn a single dvd double layer with all the burning software three I have and it is still fine, no problem. It's just the blu - ray media that cannot be read or written. The only supports blu - ray, I used from the first day was Kodak and never had a problem. That's what baffles me.
  Please provide previous steps of troubleshooting, or information that can help HP help you. : I don't know at this point if it's a hardware or software problem with the computer or burner blu - ray or both. 3 different burning programs works fine on the DVD but not blu - ray, DVD plays very well, but can not play blu - ray.
  Nothing changed since the device was working properly (installation of SW, settings, wiring, etc.): everything with the computer works fine. I even tried uninstalling and reinstalling and it is the same, I tried to update the drivers and firmware on your site and still does not work. Please help.
  How would you describe your level of technical skill? : intermediate
  First name Peter
  Name, first name rider
  [Personal information]

  Arcticwolf, sorry, I miss read your post details. That strangely resembles a failed drive. Try unistalling and reinstalling the drive, including the software and driver. If a problem has occurred, it may fix.

• First 14 will burn DVD but won't burn Blu Ray. On the same computer 11 first has no problem burning DVD or Blu Ray. Issue. Why dooes 14 does not. What can I do

  Can anyone help on why my first charge up to 14 will not burn Blu Ray but will burn DVD still 11 first on the same computer has no problems burning Blu Ray or DVD. ? Thank you. RB

  What operating system do you use?

  What brand of computer are you using (HP, Dell, etc.)? Have you spent at the web site of the manufacturer and installed the drivers from HP, Dell, support of any web site page? Sometimes drivers that Windows installs are not as effective - especially if you have recently upgraded to Windows 10.

  There may be other factors, but we will need a lot more information in order to solve the deeper problems.

• PRE9 - to burn Blu - Ray file available?

  Burning Blu - Ray in the record has been added to PRE9?

  See you soon,.
  --
  Neale
  Insanity is hereditary, get you your children

  Unfortunately, no, Neale.

• Still adjust the size to fit on blu - ray disc?

  I have a number of files this total:

  Size - 9 373 926 KB or 8,939 GB total

  Total-3 hours, 2 minutes and 41 seconds

  I burned a blu - ray disc before and he played very well, but after that I made a few changes and I tried to implement a new project to burn this image disk size is too big when he finished. Will still try to make the size on disk less then 23 GB? or should I adjust the settings?

  

  The only way to have an automatic adjustment is that if your belongings are UN-transcoded... to a DVD (I do not BluRay) I export P - Pro, DV AVI and yet and still have to do the automatic transcoding

• Audio popping after burning blu - ray in 5.1

  Just as a warning, I'm relatively new to Adobe Premiere and I'm under first Elements 8 on a Sony Vaio with a processor of Intel Core i5 - 580 M, GPU ATI Mobility Radeon HD 5650, 8 GB DDR3 - SDRAM - 1066 and Windows 7 Home Premium 64 - bit.

  I'm trying to create discs blu - ray full HD and 5.1 surround sound. Video source is full HD 1920 x 1080 with. Extension M2TS. When I have Adobe Premiere Elements 8 check the properties for my videos, it says the audio format of the source is "48, 000Hz - compressed - 6 channels" and the audio format of the project is '48, 000Hz - 32 bit floating point - 6 channels. This is despite the fact that the source is 5.1. However what edition of videos "5.1" appears next to the audio 1 on the timeline. I read something on this issue, and I guess that it is not the cause of any audio bad after an engraving of blu - ray.

  I create new projects using these settings:

  NTSC-AVCHD-Full HD 1080i 30 5.1 channels

  After a few quick changes I burn a disc blu - ray with 1920x1080i THAT NTSC Dolby H.264 preset. When checking of the combustion quality video looks great but audio has a distinct bursting or cracking sometimes that isn't in the file source at all. Someone has any ideas why a burn causes these audio imperfections appear? I've never had problems with burns from channel 2 and I'll probably just end up sticking with 2 audio channels, if a solution cannot be found. Note, the audio output is also much lower than the burned copy when read from the source file. This occurs even when the volume of the clip is set to the max of + 6.0dB. Thanks for any help.

  First of all, the pre can't burn, or the share of the export/DD 5.1 SS Audio. PrPro even needs additional Minnetonka Audio SurCode 5.1 DD SS pluginto export this Audio stream. Pre can work with DD 5.1 SS in many project Presets, but will need mixer 2 channel for export, or to burn.

  Now, when we make cuts on the Audio files and the ends upwards, and cuts do not run from "zero crossing", you can pop or big ticks. It's the lack of continuity in the Audio waveform - not at zero crossings. Usually, these reductions based on crossing zero setting will eliminate the POPs and clicks.

  Good luck

  Hunt

• Problems burner Blu - Ray (HL-DT-ST BDDVDRW GGC-H20L)

  I'm REALLY frustrated!

  My Pavilion d4999t-2 came with a disk drive BluRay & lightscribe (HL-DT-ST BDDVDRW GGC-H20L) I've used for the past two years... then 2 weeks ago the laser that burns CD - R & grilled LightScribe.  Fortunately (I thought), I got the extended warranty, so I contacted Hp.

  After going through the troubleshooting steps, I convinced that the CD-R/LightScribe laser has been burned, and he sent me a replacement (#1).

  When I installed the replacement drive, everything works perfectly, except it would not write BD - R (recordable BluRay) discs.  He would not even acknowledge that a BD - R was even inserted in the drive.

  Thus, after several "Troubleshooting" with assistance from Hp, they shipped another replacement (#2).  When I installed it, it could read AS CD & CD - R discs only!  He doesn't even have any disc BluRay or DVD was even inserted in the drive.

  Troubleshooting more (during which, according to their instructions, I lost all access to the command) and they ship me another replacement (#3).  This is the same as the first.... It can read/write CD and DVD and it will read a BluRay disc, but it does not recognize BD - R disc when inserted!

  After 2 weeks and 3-disc replacement, I am not officially frustrated!

  Of course, that are given to nine drives (the 'new' date I received is in Nov 2007), it seems that one who is to repair those disks does not a very good job!

  Has anyone else had similar problems with BluRay burner or get a replacement from Hp work?

  Mystery is solved

  It turned out that hp had the incorrect part description in their catalog of replacement

  All this time, they were send me Blu - Ray, not engravers READERS!

  After spending a few hours with a technician (Arkansas fortunately - I don't have to deal with an Indian accent most read a script), she shot to the top of my original and verified system control the original drive.  After comparison with the disc I had received, she found the error and put in a change order to get the fixed catalog.  I hope that nobody else will have to go through the problems that I had.

  Now a happy camper again

• Yet 5.1 on OS 10.5.8 burn Blu - ray discs, but crashes during the generation of the same project DVD

  I spent a few weeks creating a Blu - ray disc double layer with 20 menus and 44 timelines lengths ranging from 18 minutes 9 seconds.

  The final product will be a double pack containing the replicated Blu - ray Disc and DVD.

  I have pre-transcoded DVD and BD and related assets proper. The Blu - ray Disc built properly and seems to have no problems.

  When I try to output in DVD Encore crashes almost immediately. I also tried to record just a DVD image, and it crashes at the same place.

  I don't really want to recreate this entire program in DVDSP, but that's my plan.

  Other ideas would be appreciated.

  Thank you!

  So I solved the problem by removing all the ac3 and m4v (including the related m2v) records on the SNA timlines replacing the original self-contained reference movies from FCP7. Then, I left still transcode and build from one day to the next, hop in the DVD to work one morning.

  Now, I just need to transcode again for the Blu - ray or return to a backup...

• I have burn blue ray but audio is not

  I have send to compressor and audio video is here, burn a blue ray dvd and there is no audio data

  Did you include the Dolby Digital parameter in addition to H.264 implementation when you applied in the compressor?

  Russ