Create the Script to fill the SimpleDisplayName attribute Active Directory Exchange

Similar Questions

• Cannot create the Pool - host active directory unavailable

  Team

  When I create a linked clone Desktop Pool im get the host Active directory unavailable error... when I run dcdiag from the Viewconnection server all returns fine / successful... I ping the domain name itself and the controller DC very well from the network... Any idea where I can look to see what the issue is here?

  Thanks in advance

  Shaun

  You should do all of these tests from the vCenter server, here View Composer is running and that's what joined the VM:s in the field.

  Linjo

• Unable to update the password on Active Directory

  Hello
  
  We have configured IOM 11.1.1 to connect to MS Active Directory for user configuration tasks. While operations are performed smoothly, for a limited number of users, we have a problem to update their password on Active Directory. Whenever users update their password on IOM, their password on Active Directory update fails with the following exception on the Active Directory Connector server. What could be the possible reasons?
  
  06/05/2013 10:48:23 < INFORMATION >: class-> ActiveDirectoryUtils-> GetDirectoryEntry method, Message-> create a directory with path: LDAP: / / * / CN = *, OR = users, OU = tax investigation, DC = *, DC = *, DC = *, DirectoryAdminName = *------*, DirectoryAdminPassword = *, authtype = Secure
  06/05/2013 10:48:23 < VERBOSE >: class-> ActiveDirectoryUtils,-> GetDirectoryEntry method, Message-> setting of the Option of chasing referral as ALL for the path: LDAP: / / * / CN = Deodatus Kato, OR = users, OU = tax investigation, DC = *, DC = *, DC = *.
  06/05/2013 10:48:23 < INFORMATION >: class-> ActiveDirectoryUtils,-> GetDirectoryEntry method, Message-> output of the method. The directory entry created for the way back = LDAP: / / * / CN = Deodatus Kato, OR = users, OU = tax investigation, DC = *, DC = *, DC = *.
  06/05/2013 10:48:23 < VERBOSE >: class-> ActiveDirectoryUtils, the-> GetDirectoryEntryFromUid method, the Message-> output of the method. Return value is entered with the path of the directory: LDAP: / / * / CN = Deodatus Kato, OR = users, OU = tax investigation, DC = *, DC = *, DC = *.
  06/05/2013 10:48:23 < INFORMATION >: class-> ActiveDirectoryConnector, method-> update, Message-> got a host directory entry: * with UID: Org.IdentityConnectors.Common.ReadOnlyList'1 [System.Object]
  06/05/2013-10:48:23 < VERBOSE >: class-> ActiveDirectoryUtils, the-> UpdateADObject method, the Message-> method entered. Parameter: oclass = MESSAGE_OBJECT_CLASS___ACCOUNT__, DirectoryEntry, attributes, type is REPLACE, ActiveDirectoryConfiguration
  06/05/2013-10:48:23 < VERBOSE >: class-> ActiveDirectoryUtils, the-> UpdateADObject method, the Message-> Auxiliary Classes for handling
  06/05/2013-10:48:23 < VERBOSE >: class-> ActiveDirectoryUtils, the-> AddAndRemoveAuxClasses method, the Message-> method entered. Parameters: UpdateType = REPLACE, attributes, DirectoryEntry
  06/05/2013 10:48:23 < VERBOSE >: class-> ActiveDirectoryUtils, the-> AddAndRemoveAuxClasses method, the Message-> output of the method.
  06/05/2013 10:48:23 < VERBOSE >: class-> ActiveDirectoryUtils, the-> UpdateADObject method, the Message-> handling update for the class of the object: __ACCOUNT__
  06/05/2013 10:48:23 < VERBOSE >: class-> ActiveDirectoryUtils, the-> UpdateADObject method, the Message-> set the user password
  06/05/2013 10:48:23 < VERBOSE >: class-> ActiveDirectoryUtils, the-> UpdateADObject method, the Message-> current password is null. Set the password by using the password manager
  ConnectorServer.exe error: 0: System.Runtime.InteropServices.COMException (0 x 80072035): the server is unwilling to process the request. (Exception from HRESULT: 0 x 80072035)
  at ActiveDs.IADsUser.SetPassword (String NewPassword)
  to Org.IdentityConnectors.ActiveDirectory.PasswordChangeHandler.changePassword (DirectoryEntry directoryEntry, GuardedString gsNewPassword) in c:\ADE\aime_oimcp\idc\bundles\dotnet\ActiveDirectory\ActiveDirectoryConnector\PasswordChangeHandler.cs:line 398
  to Org.IdentityConnectors.ActiveDirectory.ActiveDirectoryUtils.UpdateADObject (ObjectClass oclass, DirectoryEntry directoryEntry, ICollection 1 attributes, type UpdateType, ActiveDirectoryConfiguration config) in c:\ADE\aime_oimcp\idc\bundles\dotnet\ActiveDirectory\ActiveDirectoryConnector\ActiveDirectoryUtils.cs:line 342
  at Org.IdentityConnectors.ActiveDirectory.ActiveDirectoryConnector.Update (type UpdateType, oclass ObjectClass, ICollection 1 attributes, OperationOptions options) in 1639 c:\ADE\aime_oimcp\idc\bundles\dotnet\ActiveDirectory\ActiveDirectoryConnector\ActiveDirectoryConnector.cs:line
  to Org.IdentityConnectors.Framework.Impl.Api.Local.Operations.UpdateImpl.Update (ObjectClass objclass, Uid uid, ICollection 1 replaceAttributes, OperationOptions options) in 1377 c:\ADE\aime_icf\icf\framework\dotnet\FrameworkInternal\ApiLocalOperations.cs:line
  at Org.IdentityConnectors.Framework.Impl.Api.Local.Operations.ConnectorAPIOperationRunnerProxy.Invoke (object proxy, method MethodInfo, Object [] args) in c:\ADE\aime_icf\icf\framework\dotnet\FrameworkInternal\ApiLocalOperations.cs:line 244
  to ___proxy1. Update (ObjectClass, Uid, ICollection 1, OperationOptions)
  to Org.IdentityConnectors.Framework.Impl.Server.ConnectionProcessor.ProcessOperationRequest (request OperationRequest) in c:\ADE\aime_icf\icf\framework\dotnet\FrameworkInternal\Server.cs:line 609
  
  DateTime = 2013-05-06 T 07: 48:23.6474785Z
  
  --
  UZ

  what the password to format existing in active directory? (alfanumeric/no, password length, etc.)
  I always thought like that because I have updated the password does not match the format in Active Directory password

• Migration of the domain controller Active Directory of windows 2000 server to a Server 2008.

  I have an old machine that is running Windows 2000 server and it's our only one domain controller in a mixed 2000/2003/2008 server environment. I would like to move to one of the servers 2008 Active Directory and make the PDC and withdraw from the old box of 2000.

  I saw a sea of documentation about the updated/move ActiveDirectory, but no clear examples of what I need to accomplish.

  Can I do a dcpromo on a 2003 server, synchronization of the 2000 box, retire the 2000 Server, then dcpromo th 2008 Server 2003 Server? I know this may seem simplistic to a complicated procedure, but I have not really found anything to support...

  A simple link to a procedure taken care of step by step would be great.

  Thanks for all the ideas in advance.
  Mike

  The Forum Windows Server would be the appropriate forum for your inquiry.

• PowerCLI script for join ESXi hosts to Active Directory

  Is there a script that I can run to join the ESXi hosts Active Directory?  I have over 100 guests that I need to join AD and want to add it script instead of using the GUI VC.

  Thank you!

  Matt

  You can browse all of your servers, but you would need to make fully automated, is get the credentials somewhere.

  You have different passwords on all ESXi servers?

  In this case, you could do something like that

  $cred = get-Credential # prompt for user and password

  Get-VMHost | Set-VMHostADDomain -ADJoin:$true -Domain$domain-Credential $cred

  If you do not have the same account/password for all servers ESXi, you want probably asked for each host.

  You could possibly temporarily store in a file and read this file.

  $accounts = @ {}

  Import-Csv "C:\accounts.csv" | %{

  $accounts [$_.hostname] = $_.password

  }

  Get-VMHost | Set-VMHostADDomain -ADJoin:$true -Domain$domain-User root -Password $accounts[$_.Name]

  The CSV file contains 2 columns, called host name and the other called password.

  We read the CSV file and store the passwords in a hash table, where the host name is the key.

  We use the hash table to fetch the password of the Set-VMHostADDomain cmdlet tree.

• Question about the attributes Active Directory and ACS 5.2

  To authenticate on our wireless, our ACS server checks to ensure that a node is a member of a specific group of computers.  When we disable the computer account, the continuous ACS server to spend despite the account being disabled the authentication. This isn't the only thing that is checked, we also checked for a valid certificate issued by our CA.  Regardless, if the computer account is disabled I would like for the ACS server to the authentication failed.  Is it possible to map an attribute of the computer account to a radius attribute?  Or simply configure the ACS server to check a flag on the AD attribute?

  Specifically, here's what we see in the steps in the section for a machine that's account has been disabled:

  24475 account user or host is disabled; setting the IdentityAccessRestricted flag to true.

  I want to let him see this 'true' flag and fail authentication, but it does not work.  Any suggestions?

  The IdentityAccessRestricted attribute that is referenced in the steps is an additional attribute that can be used in conditions of approval

  It is set to true if access to the account is disabled, outside the period of access etc.

  This gives flexibility when AD attributes are retrieved for use in licensing requirements and will allow the application to be refused if the flag is set.

  To do this add a new condition in the authorization policy

  If (AD1-> IdentityAccessRestricted) == TRUE select profile permission to deny access to the suite

• ISE 2.0 - assignment of the DACLS of Active Directory

  Hello

  Maybe someone can help me with this:

  I would attribute a DACL of an attribute I get from the user being allowed AD object.

  Thus, for example, I have set up 'ACL test' to ISE, the same name is assigned to a user of the AD.

  Now, I want to assign this ACL in an authorization profile with the value I get from the AD attribute.

  Under authorization profiles, I can't assign one AD the 'name of the DACL"attribute in common tasks.

  Does anyone have an idea how to do this with ISE 2.0?

  Thank you

  Joerg

  I doubt that you can do this, you must use the AD attribute as a condition in authz rules and reconciliation so only with an authorization profile, which contains your setting DACL. This means of course you will need an article by different DACL you wan't to use.

• Can I run Backup Server (Symantec BackupExec), accounts (fast book) on the single domain Active Directory server software

  Dear all,

  I am under domain, Active Directory and the backup server (Backup Exec) and called to account quick book on the same server.

  Does make all the problems? Kindly looking for answers.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• The user's Active Directory domain

  In the Console of BB10, under Microsoft Active Directory integration, you can change the "domain of the user.  I need to be able to change this setting through the API.  Is there a function for it?  Currently, the admins have manually change this setting to search for users in other areas.

  This setting seems to control the whole BOTTOM area uses for cataloging user accounts, what changes this might have rather drastic results.

  I would recommend announces a new application functionality to JIRA, I see not all methods where this can be controlled programmatically through BWS today.

• Administrator rights to the ACS using Active Directory groups

  Good afternoon

  We must be able to use administrative accounts for our device ACS who reside in an Active Directory group, if possible.  If this is not possible, what other safer options would we be able to use (RADIUS authentication or authentication RSA 2)?

  Thanks in advance

  You can only use the locally stored accounts within the ACS.

• View the authentication information active directory with PowerCLI

  How can I get a list of all the hosts that don't use active directory for authentication local environment using powerCLI?

  Try like this

  Get-VMHost | Get-VMHostAuthentication |

  where {$_.} Area - eq $null} |

  Select @{N = "Name"; E={$_. VMHost.Name}}

• OracleServiceXE does not start after the installation of Active Directory

  Hello people,
  
  New to Oracle but competent in general I.T. stuff. Client has contacted saying the role Active Directory is installed on the box Server 2008 operates as a virtual machine. After which client could access is no longer remote server and subsequently deleted from Active Directory. Since then, OracleServiceXE will not start and no response on the homepage of Oracle apex / http://127.0.0.1:8080 / f? p = 4950.
  
  I see a lot of other posts here for a resolution of the problems that led to the relocation of the software. We are OK with that. However, I would check the database of the customer will be able to be put back in place after reinstalling? If so, what is this process please?
  
  We are open to troubleshooting and so if there is a solution relatively easy but otherwise open to reinstall.
  
  We are open to paid support if necessary that the client has been down for a few days now.
  
  Please help!
  
  Thank you
  
  Jon

  JL09 wrote:
  VALID 4.1.1.00.23
  APEX_040100 AUGUST 20, 2012 14:45:38

  XE includes Apex version is 4.0.2 I believe, so 4.1.1 would mean an upgrade has been done or at least tried. This is consistent with the loss of the app to start and perhaps also the http port disabled.

  I would like to ask if anyone knows on the upgrade of the Apex, especially for about 20 August.

  Of course, there is the theoretical possibility that db restored files came from a different set of installation/database XE, why we see Apex upgraded, etc.

  You have an install*.log file? (install.log)

  Perhaps it is a facility of the Group of hotfixes. You have all the files matching a search for the apxpatch. * ?

  Get the login page will once again, try the step install message update (download) the Images directory, upgrade installed by installation guide (or group of patches note).

  http://docs.Oracle.com/CD/E23903_01/doc/doc.41/e21673/otn_install.htm#BHAJIGDA
  http://www.Oracle.com/technetwork/developer-tools/Apex/application-express/411-Patchset-notes-1528994.html#CHDIHHHD

  Published by: orafad on November 4, 2012 23:44

  Published by: orafad on November 4, 2012 23:54

• Create the role attribute to a recipient user after user approval - IOM 11.1.2

  Hi all
  
  I ve created a composite custom for creation of the user. Once a user of the applicant (for example user-R, other than the xelsysadm) creates a user (say User1), he would go to approaval to the Manager of the applicant (say user-RM). Once the applicant manager approves the request, the user is created in the IOM.
  
  Now, once the user is created, I need to assign a role personalized the User1 by using APIs. For some reason, we will not use the role membership rule.
  
  
  My Situation
  ----------------
  -J' created a handler for post (for MODE = CRΘER) which generate custom "user login" and also assign a role personal to the user. Role was being entrusted "Beneficial user" if created by "xelsysadm", for, there was no approval triggered.
  
  But when I create one recipient user with other than 'xelsysadm', the workflow is triggered and role assignment is a failure in the event handler.
  
  Please suggest me a way to assign the role (using API) on the 'recipient user', once the application is approved by the assignee.

  See the Article: 1532267.1

  -Marie

• escape to create the operation with active validators

  Hi all!
  
  I have Mastertable and DetailForm with button submit on the page.
  Fields have NOT NULL constraints in DetailForm.
  I create, remove, commit, rollback and undo buttons also.
  
  When I push CREATE button navigation gets in shape.
  Some fields with constraints not null in form leave blank.
  So, I want to cancel the CREATE operation.
  I push the button CANCEL and then I see errors like this "error. Required value.
  And control of leave on the inside to create operation.
  
  So my question is what should I do to cancel create operation and out of shape?
  
  Sincerely, Vladimir.

  Set the immediate property to true (Rollback)

• Unable to set the password in Active Directory 2008 R2 group policy

  We are trying to create a group policy that renames the built-in to our servers administrator account and change the password.  The strange thing is that when we create this Group Policy Computer Configuration > preferences > Control Panel Settings > local users and groups, the password section is grayed out.  We have a test domain, and this isn't a problem here.

  We tried to set the password with different accounts (domain administrator and other members of the Domain Admins group) and different machines (directly on my workstation and domain controller).  Here is a screenshot of what we see.  Any help would be greatly appreciated!

  

  I found the cause in MS14-025.