Administrator rights to the ACS using Active Directory groups

Similar Questions

• Portal administrators from Active Directory groups

  I want to add additional users with the status of "admin", so that more people can use the "Admin Console". I want to do this using Active Directory groups.

  Can anyone say if this is possible and how?

  
  

  Maybe it's in the documentation, but I couldn't find it.

  For now, it is not possible to assign the Admin role to a group of users. However, you can promote individual users to the Administrator role. You can search for a user name and click on the user name to view the details of a user. On the left side, you will see a role (s) and the 'User' text is clickable. When you click on that text you will be able to change the role.

• How to give administrative rights for the domain users (user is outside organization).

  Hello

  How to give administrative rights for the domain users (user is outside organization).

  If the employee works in the company of xxxx but it supports the client project and is located on the place of the customer, but it does not use the client computer and not on the client domain as well, but the employee is in the company of xxxx must be given administrative rights to the computer. can someone help me on this ASAP.

  Thank you

  MURUGESAN Rudy,

  This issue is beyond the scope of this site and to make sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home
  http://social.msdn.Microsoft.com/forums/en-us/home

• Active Directory groups can be put into service in the FDMEE places?

  Hi experts FeeDMEE:

  We are upgrading to HFM/FDMEE 11.1.2.4.    We would like to use only the Active Directory groups for our security in Shared Services.

  I did a lot of audit looking at whether we can use security location FDMEE ad groups.  So far, the only way I found to make the security location uses the native approach (settings / security settings / security location...) Security by location, click on keep usergroup to set up groups).    But it doesn't seem to be an option if you create groups such as native or ad groups (FDMEE them creates only natively).

  Does anyone know if it is possible in FDMEE to use security of the location ad groups?

  Thank you
  Mark Smith

  I discovered that it is more possible for FDMEE create Aboriginal groups for the security of the location.

  However, Active Directory groups can be added as members of indigenous groups.   In this way, users should only be added to Active Directory groups.    The only maintenance is to add or remove groups active directory to or from the indigenous groups of FDMEE.

• View the authentication information active directory with PowerCLI

  How can I get a list of all the hosts that don't use active directory for authentication local environment using powerCLI?

  Try like this

  Get-VMHost | Get-VMHostAuthentication |

  where {$_.} Area - eq $null} |

  Select @{N = "Name"; E={$_. VMHost.Name}}

• Unable to update the password on Active Directory

  Hello
  
  We have configured IOM 11.1.1 to connect to MS Active Directory for user configuration tasks. While operations are performed smoothly, for a limited number of users, we have a problem to update their password on Active Directory. Whenever users update their password on IOM, their password on Active Directory update fails with the following exception on the Active Directory Connector server. What could be the possible reasons?
  
  06/05/2013 10:48:23 < INFORMATION >: class-> ActiveDirectoryUtils-> GetDirectoryEntry method, Message-> create a directory with path: LDAP: / / * / CN = *, OR = users, OU = tax investigation, DC = *, DC = *, DC = *, DirectoryAdminName = *------*, DirectoryAdminPassword = *, authtype = Secure
  06/05/2013 10:48:23 < VERBOSE >: class-> ActiveDirectoryUtils,-> GetDirectoryEntry method, Message-> setting of the Option of chasing referral as ALL for the path: LDAP: / / * / CN = Deodatus Kato, OR = users, OU = tax investigation, DC = *, DC = *, DC = *.
  06/05/2013 10:48:23 < INFORMATION >: class-> ActiveDirectoryUtils,-> GetDirectoryEntry method, Message-> output of the method. The directory entry created for the way back = LDAP: / / * / CN = Deodatus Kato, OR = users, OU = tax investigation, DC = *, DC = *, DC = *.
  06/05/2013 10:48:23 < VERBOSE >: class-> ActiveDirectoryUtils, the-> GetDirectoryEntryFromUid method, the Message-> output of the method. Return value is entered with the path of the directory: LDAP: / / * / CN = Deodatus Kato, OR = users, OU = tax investigation, DC = *, DC = *, DC = *.
  06/05/2013 10:48:23 < INFORMATION >: class-> ActiveDirectoryConnector, method-> update, Message-> got a host directory entry: * with UID: Org.IdentityConnectors.Common.ReadOnlyList'1 [System.Object]
  06/05/2013-10:48:23 < VERBOSE >: class-> ActiveDirectoryUtils, the-> UpdateADObject method, the Message-> method entered. Parameter: oclass = MESSAGE_OBJECT_CLASS___ACCOUNT__, DirectoryEntry, attributes, type is REPLACE, ActiveDirectoryConfiguration
  06/05/2013-10:48:23 < VERBOSE >: class-> ActiveDirectoryUtils, the-> UpdateADObject method, the Message-> Auxiliary Classes for handling
  06/05/2013-10:48:23 < VERBOSE >: class-> ActiveDirectoryUtils, the-> AddAndRemoveAuxClasses method, the Message-> method entered. Parameters: UpdateType = REPLACE, attributes, DirectoryEntry
  06/05/2013 10:48:23 < VERBOSE >: class-> ActiveDirectoryUtils, the-> AddAndRemoveAuxClasses method, the Message-> output of the method.
  06/05/2013 10:48:23 < VERBOSE >: class-> ActiveDirectoryUtils, the-> UpdateADObject method, the Message-> handling update for the class of the object: __ACCOUNT__
  06/05/2013 10:48:23 < VERBOSE >: class-> ActiveDirectoryUtils, the-> UpdateADObject method, the Message-> set the user password
  06/05/2013 10:48:23 < VERBOSE >: class-> ActiveDirectoryUtils, the-> UpdateADObject method, the Message-> current password is null. Set the password by using the password manager
  ConnectorServer.exe error: 0: System.Runtime.InteropServices.COMException (0 x 80072035): the server is unwilling to process the request. (Exception from HRESULT: 0 x 80072035)
  at ActiveDs.IADsUser.SetPassword (String NewPassword)
  to Org.IdentityConnectors.ActiveDirectory.PasswordChangeHandler.changePassword (DirectoryEntry directoryEntry, GuardedString gsNewPassword) in c:\ADE\aime_oimcp\idc\bundles\dotnet\ActiveDirectory\ActiveDirectoryConnector\PasswordChangeHandler.cs:line 398
  to Org.IdentityConnectors.ActiveDirectory.ActiveDirectoryUtils.UpdateADObject (ObjectClass oclass, DirectoryEntry directoryEntry, ICollection 1 attributes, type UpdateType, ActiveDirectoryConfiguration config) in c:\ADE\aime_oimcp\idc\bundles\dotnet\ActiveDirectory\ActiveDirectoryConnector\ActiveDirectoryUtils.cs:line 342
  at Org.IdentityConnectors.ActiveDirectory.ActiveDirectoryConnector.Update (type UpdateType, oclass ObjectClass, ICollection 1 attributes, OperationOptions options) in 1639 c:\ADE\aime_oimcp\idc\bundles\dotnet\ActiveDirectory\ActiveDirectoryConnector\ActiveDirectoryConnector.cs:line
  to Org.IdentityConnectors.Framework.Impl.Api.Local.Operations.UpdateImpl.Update (ObjectClass objclass, Uid uid, ICollection 1 replaceAttributes, OperationOptions options) in 1377 c:\ADE\aime_icf\icf\framework\dotnet\FrameworkInternal\ApiLocalOperations.cs:line
  at Org.IdentityConnectors.Framework.Impl.Api.Local.Operations.ConnectorAPIOperationRunnerProxy.Invoke (object proxy, method MethodInfo, Object [] args) in c:\ADE\aime_icf\icf\framework\dotnet\FrameworkInternal\ApiLocalOperations.cs:line 244
  to ___proxy1. Update (ObjectClass, Uid, ICollection 1, OperationOptions)
  to Org.IdentityConnectors.Framework.Impl.Server.ConnectionProcessor.ProcessOperationRequest (request OperationRequest) in c:\ADE\aime_icf\icf\framework\dotnet\FrameworkInternal\Server.cs:line 609
  
  DateTime = 2013-05-06 T 07: 48:23.6474785Z
  
  --
  UZ

  what the password to format existing in active directory? (alfanumeric/no, password length, etc.)
  I always thought like that because I have updated the password does not match the format in Active Directory password

• Migration of the domain controller Active Directory of windows 2000 server to a Server 2008.

  I have an old machine that is running Windows 2000 server and it's our only one domain controller in a mixed 2000/2003/2008 server environment. I would like to move to one of the servers 2008 Active Directory and make the PDC and withdraw from the old box of 2000.

  I saw a sea of documentation about the updated/move ActiveDirectory, but no clear examples of what I need to accomplish.

  Can I do a dcpromo on a 2003 server, synchronization of the 2000 box, retire the 2000 Server, then dcpromo th 2008 Server 2003 Server? I know this may seem simplistic to a complicated procedure, but I have not really found anything to support...

  A simple link to a procedure taken care of step by step would be great.

  Thanks for all the ideas in advance.
  Mike

  The Forum Windows Server would be the appropriate forum for your inquiry.

• I can't change the location using activation please

  I can't change the surprise using activation please

  Hello

  Sorry for the inconvenience caused.

  I suggest refer you to the link below on how to enable Windows 8.

  http://Windows.Microsoft.com/en-us/Windows-8/why-activate-Windows

  I hope this helps.

• ACS 5.1 using Active Directory to manage the strategy of network device Admin

  Hi guys, we have configured an ACS 5.1 and integrated with active directory Win2K3, we created two AD groups to manage devices network for administrators and one for operators (read-only), so we have configured a device admin strategy and the two groups work very well, but now we are facing a little problem any user that exists in the AD can connect (user exec mode) network devices and we want to cancel the connection with politics, but we do not know how.

  Is there a way to get a user authenticated against acs internal or external group, but at the user level, everything as you can make it to GBA 4.X?

  Thanks for your help!

  Best regards

  Oscar

  Yes, you can change that, it's a profile of shell by default. You must create a new one with privilege level "not in use" and select the new profile of the shell (no Directors or Operartors) under Default Device Admin > authorization profile > edit and make changes.

  I hope this helps.

• While trying to install AD RMS, I came across the following error message on the Installation results page: Rights Management Services Installation of Active Directory was successful with errors

  Try to configure the Server Active Directory rights management failed. Exception has been thrown by the target of invocation. to

  System.DirectoryServices.Configuration.ProvUtils.EnsureGroupMembership (String
  strTargetComputer, String strUserName, string strGroup, Boolean, String strDomain
  fShouldBeMember)
  at Microsoft.RightsManagementServices.Configuration.ProvisioningBase.EnsureUser)
  at Microsoft.RightsManagementServices.Configuration.ProvisioningBase.Run)
  at Microsoft.RightsManagementServices.Configuration.ProvisionerBase.DoProvision)
  at Microsoft.RightsManagementServices.Configuration.ProvisionerBase.Run)
  to Microsoft.RightsManagementServices.Configuration.ProvisionerHelper.Run (OperationType
  operationType, data object)
  to Microsoft.RightsManagementServices.Configuration.ProvisionEngine.Run (OperationType
  operationType, Boolean passwordEncrypted)
  at Microsoft.RightsManagementServices.Configuration.CmdLineHandler.Run)
  Delete and re - install AD RMS to try the implementation again.

  Hi Samuel

  Your question is beyond the scope of these Forums for answers. It is better suited for the IT Pro TechNet public. Please ask your question in the following forum.

  Directory Services Forum - Technet:
  http://social.technet.Microsoft.com/forums/en/winserverDS/threads

  Concerning

• Firepower does not work when using the Active Directory group as a rule filter access control

  I am PoV of Cisco ASA with the power of fire with my client. I would like to integrate the power of fire to MS Active Directory. Everything seems to work properly.

  -Fire power user agent installation to complete successfully. Connection to AD work fine. The newspaper is GREEN.

  -J' created a Kingdom in FireSight and you can download users and groups from Active Directory.

  -J' created a politics of identity with passive authentication (using the field I created)

  -Can I use the AD account "user" as a filter in access control rule and it work very well.

  However, if I create the rule of access control with AD Group', the rule never get match. I'm sure that the user that I test is a member of the group. Connection event show the system to ignore this rule and the traffic is blocked by the default action below. It doesn't look like the firepower doesn't know that the user belongs to the group.

  I use

  -User agent firepower for Active Directory v2.3 build 10.

  -ASA 5515 software Version 9.5 (2)

  -Fire version 6.0.0 - 1005 power module

  -Firepower for VMWare Management Center

  Any suggestion would be appreciated. Thanks in advance.

  Hello

  You should check the download user under domain option. Download the users once belonging to a group is specified on the ad and then test the connection.

  Thank you

  Yogesh

• How to deepen the administrator rights on the computer?

  Original title: a little URGENT please - Windows 8 lost administrator rights

  Here's the question.

  I have an Asus all in one type of windows desktop PC 8. I improved this standard to professional.
  There is a local user account, who somehow lost administration rights. This is obviously a problem, because I can not access several functions of the computer, including a critical application of the work.
  There is no other user accounts on the pc to connect to the standard administrator account that I suppose is disable by default? As I don't see it.
  After some googling, I tried a few methods to solve this, nothing helps. It seems im in a catch 22, as to solve the problem of having admin rights, I need to have administrator rights to perform the majority of bugs!
  Tried to start the safe mode, to re - activate administrator privileges by pressing F8 or SHIFT F8
  -no effect - pc just started normally
  Tried to activate the account administrator "cmd".
  -This must be done by run cmd as administrator, which I'm not currently!
  Tried to add mode without fail to the startup list
  -Need to be administrator to do!
  I don't see any method to restore or recover to previous point
  Impossible to reinstall windows as it came pre-installed with windows. I was about to add the computer to a domain so that I could make a clean image before this problem occurred
  Uh, I forgot what I tried now. pulling my hair out over this. Seems nothing more I need to do, I have access to an administrator account to run needs. If I could get in safe mode somehow that seems like it would allow me to solve this problem, but I can't get into that any means.
  Help, please! It is a working pc and the only app that gets used, requires administrator privileges to run. If his critics I solve this problem
  Thank you!
  Hi, I know I'm a little late to the party, but I found this post faced a similar problem and thought that post my findings.
  I found a work around for this problem, which does not require a reinstall of Windows, but you may lose your user account.
  Summary:
  The problem is that in Windows 8, the administrator is inactive by default, you will have to find a way to activate it. You can activate the admin as an admin account, however. Fortunately, (on my machine anyway) it seems that you can access your hidden from the Safemode administrator account. If your first set of objectives will be as follows:
  -starting in safe mode
  -Log in as an administrator
  -l' administrator, enable the account administrator similarly.
  -Restart your machine and you as an administrator outside of safe mode (normal mode).
  From here, you should be free to do what you want. Now that the admin account is active, you are allowed to type a password when prompted (by default that the password is empty). For me, however, when I tried to promote my previous user administrator account (among other things) I noticed symptoms that seem to indicate that the account ceased to exist. I went through measures to set up a new account and get it synced with my microsoft email account.
  -Create a new user account
  -give administrator rights
  -remove my old (for some reason, hidden) account
  -Sync to the top of my new user account with microsoft e-mail account.
  Directions for use:
  How to get admin access:
  (1.) start in safe mode. You can make it easier by opening a command prompt (Start menu-> type "cmd"). And type "shutdown/r/o".
  2.), your computer begins to restart, but give you a set of troubleshooting options. Choose troubleshooting->-> start of the Advanced Options settings.
  3.) after reboot and enter safe mode, users of contactor by going to the start menu-> click on your user name-> and choose administrator.
  4.) Windows will begin the first initialization for this account.
  5.) once connected, open the command prompt, this time as a Director. (Make a right click-> Run as administrator).
  6.) type "net user administrator / Active: Yes" to set the admin account as 'active'. It will now be shown outside of safe mode.
  7.) restart your computer and log in as administrator again. You can now add users and to play with the permissions etc. (metro options are not available in safe mode, where the reset).
  How to remove your old account of 'lost' and synchronize your new account with the microsoft account.
  1.) create a new account via the control panel users. Don't forget to give you administrator rights.
  (2.) to remove your lost old account by typing "net use /del" in an administrator command prompt. You need to know your old account name, good luck with this one.
  3.) go into the settings of your pc: open the context menu on the right-> settings-> "change PC settings."
  (4.) to go to the users-> Select 'switch to a Microsoft account» tab
  I hope this helps!

• 6.0 ESXi host Active Directory Group authentication works in the hull but no client

  Got a weird here.

  Add 6.0 host vSphere to Active Directory.

  Added a group of pub with the Administrator role.

  I can authenticate with an AD user account that is a member of this group of ads, using SSH or Shell access.

  I cannot authenticate with an account AD who is a member of this group of ads using the Web UI or Client vSphere linking directly to the host.

  If I add the domain user directly with the role of administrator on the host computer permissions, the Web GUI and vSphere Client will be authenticate using the user of the AD.

  What it looks like access using SSH/Shell, vSphere host can burst of belonging to a group and to authenticate, but using the GUI Web or vSphere Client he can't.  There are not a lot of sense to me.

  The hostd.log file has nothing in it which is very informative, just a line saying "status: success accepted password for the user", followed by the event 131: could not connect the user without permission.

  Hello

  If you are in 6.0 Update 2? Then, this article could describe your problem:

  https://KB.VMware.com/kb/2145400

  Please try the fix and let us know if it helps.

  -Andreas

• Need administrator rights for the Intel on Satellite Pro 2100 speed step

  Hello
  I have a Satellite PRO 2100 (Pentium 4 1.9 GHz).
  I have a problem with the function of the Intel speed step, which reduces the speed of the processor at 1.2 GHz. But I have a problem: I can do this, if I use an administrator account...
  After starting, if I connect with a simple user account, the Intel speed step works... and the speed of the cpu remains at 1.9 GHz.
  So I would like to use this function with a simple user account, how do I do it please?

  Thanks for your help :)

  Hello

  As far as I know that this application is not shipped with the image of Toshiba and it s not made not part of the image.
  But I put t see any big problems. You will need to change your account administrator rights. In this case, you will need to ask someone the admin right to edit your account.

  The other possibility is to change the law for this software. There can be changes as by admin. What you can change in the Security tab in the program properties. Full control must be set to all.

  Then, it should be possible to use this application with your account.

• Can I use active directory to validate users?

  Hello

  Is it possible to link Active Directory users Teststand?

  I want to do because it allows the user to use their journal same password for the PC.

  Kind regards

  Shakeel