Create virtual machines in a cluster with vCenter Lab Manager?
Hi, I will be putting in place of Lab Manager in the near future. I already have virtual machines in the vsphere cluster I want to start dealing with Lab manager. Should I remove these virtual machines before the implementation of labmanger? I'll still be able to create and host virtual machines outside the sottware to labmanger, on the hosts in the cluster of Lab Manager?
Thanks for the help
Raymond Golden
VCP3, VCP4, MCSA,Net, was DRY.
Yes, you can certainly mix "regular" VM and VM Lab Manager in the same cluster. Just Lab Manager server knows nothing about the virtual machines created in vCenter.
You could also separate them from resource pools... Director of the laboratory can be assigned to just use a pool of resources rather than the entire cluster.
Tags: VMware
Similar Questions
-
How to build a new virtual machine based on cluster with powercli?
When you create a new virtual machine on cluster in the user interface, you cannot select the host, it is decided by the cluster.
Now, I want to create a new vm on cluster by powerCli. I have not found any parameter to specify the cluster.
Only the "$vmhost" to specify the host.
Why are they so different?
Can someone help me understand it and how to create a new VM on cluster?
Thank you in advance!
Hello, bob1118-
While, as you said, it has non - Cluster parameter to the cmdlet New - VM, you _can_ effectively specify the cluster at new time of creation of VM via PowerCLI: you specify the list of resources within the desired cluster. So a partial New - VM call would look like:
New-VM -Name myNewVM0 -ResourcePool (Get-Cluster myDestinationCluster | Get-ResourcePool -Name "Resources") -Template ...
Who uses the resource pool default "Resources" that exists in a cluster. And, you could fill in the rest of the parameters relevant to the new virtual machine of your desires. How do I?
-
How to obtain the list of virtual machines in a cluster with the specific name
Get-Cluster "Group 1" | Get - VM | where {$_.name - eq "owp *"} | Select name
I've tried to filter the virtual machines with a specific name of a cluster by using a single command line but I am not going do anything...?
I get results if I just Get-Cluster "Cluster 1' | Get - VM, but I want excluded other virtual machines to help to be enjoyed.
Use - as instead of-eq
Get-Cluster 'Cluster 1' | Get-VM | where {$_.name -like "owp*"} | select name
-
Script of PowerCLI to measure the number of host and its virtual machine in each cluster
Hello
I'm trying to create a script on regular which gives an output of the host and virtual machine into a cluster of vcenter as below counties.
Cluster: VMHost VM's
Cluster01 04 15
cluster02 02 35
Simply using a sample onliner
Get-VMHost | Select @{N = "Cl"; {E = {Get-Cluster - VMHost $_}} name, @{N = "NumVM"; E={($_ | Get - VM). County}} | Cluster of kind, name
any ideas? Thanks in advance
Kind regards
Subash.
Try this:
Get-Cluster | Select Name, @{N="Host Count"; E={($_ | Get-VMHost).Count}}, @{N="VM Count"; E={($_ | Get-VM).Count}}
-
Script to create virtual machines fails when you try to add the disk to the cluster data store
Hello
Attached is the script that I used to create virtual machines and it works very well when virtual machines are created to warehouses of unique data, but do not have clustered data warehouses. I think that the reason is that it creates the virtual machine through the esx host (who does not know the cluter) and not via vCenter (who knows about it). Unfortunately I do not know how to fix.
Thank you
Astra
Looks like he needs a store of data for this parameter object. So we need to do a get Datastore cluster I can try to test tomorrow, but try this:
If ($datastore1 - only 'none') {}
$drscluster = get-DatastoreCluster $datastore1
$vmadddsk = new-disk-hard - VM $gstname CapacityKB - $datastore1size - data $drscluster store
}
-
Hi all
I have 02 questions.
1. we have a cluster which has 02 physical hosts (Host1 and Host2). We have 02 virtual machines on the Cluster. Active DRS on the cluster.
But the problem is that my 02 VMS are always stays on a Host2. A few weeks ago, each virtual machine carried out on each host. How can I place each virtual machine on each host to perform better.
How to do this?
2. I connect to the cluster using vSphere client 5.1, under summer host, I get the following message
"Configuration problems: host is not in accordance with the attached profile.
I suspect that this is the case for my question 1?
Thank you very much
Hello
I think I found the answer for the problem of home profile. I changed the following values to 1 for each host to > settings > under software > advanced settings >
Under Data Mover
HardwareAcceleratedInit
HardwareAcceleratedMove
Under VMFS3
HardwareAcceleratedLocking
Compliance status is returned to the green.
Thanks for the advice guys!
Thank you
-
Hi all
I have a 5.5 esxi server just the a virtual machine running at the moment. I try to clone this as shown below:
http://nchrissos.WordPress.com/2013/04/22/cloning-a-VM-without-vCenter-in-ESXi-5-1-free-edition/
However, I get the error:
A virtual machine or the template with the same name is already registered. Server error: the specified key name or identifier already exists.
I have no vcenter (yet), and it's just the 1 vm. The virtual machine is turned off. I get this error regardless of the name, I said that when I choose "add to the inventory.
All advice appreciated.
Thank you
Oh dear...
you read bad advice on the internet and then you get also the stupid advice here.Ignore both!
If you want to clone a virtual machine by copying - do it like this:
Create new virtual machine with the wizard.
Skip creating a disk for new customers.In Datastorebrowser copy the original vmdk to the new dir, which has been created by the wizard.
Reopen the new VM and edit - assign the vmdk that you just copied.The procedure of the blog is not supposed to work.
Sissine trick doesn't make sense either -
For the first time, I tried to virtualize my machine using VMware vCenter Converter Standalone. The destination machine has VMware Player installed 3.1.4, so I chose, as a destination having VMware 4.0.x instead of VMware 3.0.x as 3.1.4 overflows 3.0.x. The newly created virtual machine does not under VMware 3.1.4. Is there anyway out of this except can create an another VM using VMware player 3.0.x as the destination machine? Thank you.
Then, you should be able to simply create a (empty) virtual machine with VMware Player 3.x and then just remove the blank virtual hard drive (hard files) and replace it with the one created with VMware vCenter Converter.
-
Virtual Center stops all the virtual machines in a cluster HA
Hello.
I have a question about vCenter machine. We have deployed
VMware ESX 4.0 HA cluster on Server Blade IBM 3. VCenter machine resides
on a virtual machine on the same cluster. When we tried to recharge a physical switch (in the)
IBM Blade Center), all our virtual machines on the cluster have been turned off automatically.
If the vCenter VM is turned off, then everything is fine - the reloading of the
Switch is not turning off the virtual machines (and the net is ok - start machines
work through another switch in IBM bladecenter). If the machine vCenter
powers (manually), all the other machines, which have been put off, are powered
on too (automatically, of course, with the help of the machine of vCenter). How
is that what I can adjust the machine vCenter, so it could not power power machines by
itself automatically?
ESX 4.0 (162856)
Hello
Right-click in your cluster, change the settings. Select 'Virtual Machine Options' under 'Vmware HA' and choose the host response of insulation desired for the entire cluster or individual VM. If you do not have network connections redundant between your ESX machines, you probably want the virtual machine for when you need to do maintenance or your network switch died. You should probably also disable HA while doing maintenance. You should consider to build network redundancy in the case of a production environment.
I hope that helps!
-
Get use of the resources of all virtual machines in a cluster
Hello
I have developed a measure of capacity management report that collects all the use of the resources of the virtual machines in a datacenter. The function that collects it looks like this:
def hostMemoryConsumed =]
def memoryConsumed = 0.0f
def memoryGranted = 0.0f
VMs. each() {}
VM->
try {}
memoryConsumed += vm.host.memory.consumed.current.average / 1024.0f<----- how="" to="" do="" this="" to="" get="" from="">----->
memoryGranted += vm.host.memory.capacity.current.average / 1024.0f
}
{} catch (NullPointerException e)
}
VMS is a function of type parameter VMS VMW
The works above for virtual machines in the data center, but I need it to be after cluster. I can find a cluster of virtual machines, but I'm having trouble with referring to specific values for example consumed memory and capacity.
If I change the type parameter: VMW Cluster how the metric reference would look like (see the try {})?
I don't think that a query will help me.
Thanks in advance
Erik Alm
If you want to do for a cluster, you can just get the list of virtual machines in a cluster of first and passing in your script. If you have a function for a VMWCluster you can add a parameter for "vmwCluster" that is underneath and it should give you a table (topologyObjects) that has all the virtual machines in the cluster.
QS = server.get ("QueryService") / / query Service
tquery = qs.createStatement("!) (' VMWVirtualMachine where esxServer.parent.name = "+" ' "+ vmwCluster +" "" ") .setQueryTopologyObjects (true);
topologyObjects = qs.executeStatement (tquery) .getTopologyObjects)
-
Creation of the virtual machine on a cluster using the vmcreate.pl script
Hello
I checked a few posts on this forum on how to create the virtual machine through vmcreate.pl, but responses was not so clear to me...
These are the topics I've read:
How to configure the managed object HostSystem
So, I would like to create a virtual machine on a Cluster, and not on a specific host. The vmcreate.pl script would have done the job? Or should I change it?
In the topic = >
I did not quite get, what I need to change...That's what I do:
vmcreate.pl - server 'ESX NAME' - username "LOGIN" - password 'PASS' filename - vmcreate.xml - schema vmcreate.xsd
Result:
Creation of the 'myTestMachine ': VM error
SOAP fault:
-----------
Error string: InvalidArgument
The fault detail: InvalidArgument
Here are the values of the XML file:
< name > myTestMachine < / name >
blah < Home > < / Host >
blah < Center > < / Center >
> Guest Id < Linioch < / comment-Id >
blah < Datastore > < / Datastore >
< > 2048 Disksize < / Disksize >
> 256 MB memory < < / memory >
< processor number > 1 < / number processor >
< Nic-network > < / Nic-network >
< Nic-Poweron > 1 < / Nic-Poweron >
The values are correct the cause I checked the other perl scripts.
Thanks in advance for your help
Michal
Thanks to xyz222 for the user and post Re: instance of VM to create the Cluster
I was able at the end of the problem. So simple... The value of the
in the xml file should be for example "rhel6_64Guest" and not a random word... that's all! sudo./vmcreate.pl--serveur SERVER - LOGIN - password PASS - filename... username/SampleData/vmcreate.xml - schema... /Schema/vmcreate.xsd
Successfully created the virtual machine: 'teeest2' under host HOST_NAME
-
creating virtual machines off templates in Lab Manager
Hello
I am using vCenter Lab Manager 4.0.
I have created several models of machine virtual Windows.
Now, I would like to create virtual machines on these models.
Am I able to do it. ?
If so, how can I achieve that. ?
I checked in the guide, but found no relevant info.
Maybe I'm missing something.
Please provide help. !!
Thank you.
Santos,
First of all, make sure that the model is published. Means published which are can be used as a virtual machine in the current organization. If you need to use it in another, make sure you share the model to the user / the appropriate organization.
2. go into your workspace: workspaces > hand
3. click on the button "new Configuraiton.
-Add virtual machines
-Click OK
4 deploy the configuration.
Kind regards
Jonathan
B.SC., RHCT, VMware vExpert 2009
NOTE: If your question or problem has been resolved, please mark this thread as answered and awarded points accordingly.
-
You can edit vmx files on multiple virtual machines in a cluster to allow changes of setting delay start via RCLI or Toolkit VI? How?
SAs desire a lead time of 10 seconds through the virtual company composed of several VCs with multiple data centers and clusters.
Known: we can edit the .vmx file and add: bios.bootDelay = "10000" this adds stunted ms 10000 (10 seconds) when starting
Known: we may have to re-register or some other mechanism to apply the changes to the start on the VMS settings
Has anyone tried to make a change of large company to bootDelay on VMS? Any help?
The script below will do what you want. Have fun.
-
-
How to move the virtual machine from one cluster to another cluster
How to move the virtual machine from one cluster to another cluster
If two Clusters are in the same data center, you could do a 'live' migration or vMotion, if that's the case. If the virtual machine is turned off, it may be migrated regardless of the data center.
-
How to prevent limited users to create virtual machines?
Hi all;
Is it possible to prevent standard users to create Virtual Machines in Microsoft Windows environment?
Thank you
Here's the problem I see... as long as the user has the ability to run VMware Workstation, you can't stop creating a VM since everything it takes, it's a TextEditor and a live ISO Image and the other can create a configuration manually, .vmx file that it points to the ISO Image and then double click on the manually created configuration .vmx file and its place and running. Of course not all users would go to the trouble to create the .vmx file manually but there are scripts on the Internet that do and users have other ways too.
If you don't have the appropriate infrastructure to control your users then monitor their activities and let them know him will be fired if they contravene the regulations.
Maybe you are looking for
-
HP Photosmart 5515 does not print on photo paper
I have a HP Photosmart 5515, I was sold as being suitable for use with my ipad. But it also works for printing documents that it refuses to print images on photo paper. I'm an artist and this is the most important part of a printer for me. How do I p
-
Hello I have a laptop model HP Pavilion dm1 Notebook PC with Windows 7 Starter operating system Processor: AMD Athlon (TM) II Neo K325 Dual-Core Processor 1.30 GHz Installed (live RAM) memory: 2.00 GB System type: 32-bit operating system When I tried
-
BlackBerry, BlackBerry Q5 Q5 - battery drains very quickly even in sleep mode
I have been using my Q5 for about 18 months (only SMS, BBM and FB) last week, the battery is fully charged and then within an hour it was drained during a stand by. First issue with reload - normally I go at least three days without charge. Now, a ch
-
I accidentally applied the trigger of default transition. And he did not notice before making editing much more.I thought, my luck, there now remove attribute to solve my problem.But Adobe is Adobe: a transition is not an attribute!My question: shoul