Creating asset - do not fill column subtype in the database table

Similar Questions

• "Your bootable USB key could not be created there is not enough space available on the disk.

  I am trying to install a partition of Windows 7 with an ISO on a flash drive with Boot Camp Assistant. Everytime I try it however, I get the error "your bootable USB key could not be created there is not enough space available on the disk. The flash drive that I use for this is 64 GB, so I doubt that the issue has to do with not enough available space. I have already tried the obvious, like reformat the flash drive and retry the write. Is there something I could hurt or do differently to make it work?

  MacBook Pro (retina, mid-2012)

  2.6 GHz Intel Core i7

  8 GB 1600 MHz DDR3

  NVIDIA GeForce GT 650M 1024Mo

  Use a 8GB drive.

• update of column with another column with in the same table

  Hello
  We are using oracle 10g,
  I have a table with two columns i a s number one other data type is varchar2, varchar2 column contains
  numAriques and data type character I want to move only numAriques to the numeric data type field data, please kindly give answer
  
  Thanks and greetings
  tmadugula

  You are not providing any version of the database, sample data or table desc, but anyway:

  http://asktom.Oracle.com/pls/asktom/f?p=100:11:0:P11_QUESTION_ID:3083286970877 #49518312679214

  Something like:

  create or replace function is_num
  (p_str in varchar2)
  return number
  as
  begin
    return to_number(p_str);
  exception
    when others then return null;
  end;
  

  Which translates into:

  MHO%xe> select * from bla;
  
  MY_VA  MY_NUMBER
  ----- ----------
  AAAAA
  BBBBB
  11111
  22222
  CCCCC
  33333
  
  6 rijen zijn geselecteerd.
  
  Verstreken: 00:00:01.32
  MHO%xe> desc bla
   Naam                                      Null?    Type
   ----------------------------------------- -------- ----------------------------
   MY_VARCHAR                                         VARCHAR2(5)
   MY_NUMBER                                          NUMBER(5)
  
  MHO%xe> select * from bla where is_num(my_varchar) is not null;
  
  MY_VA  MY_NUMBER
  ----- ----------
  11111
  22222
  33333
  
  Verstreken: 00:00:01.73
  MHO%xe> update bla
    2  set my_number  = is_num(my_varchar)
    3  where is_num(my_varchar) is not null;
  
  3 rijen zijn bijgewerkt.
  
  Verstreken: 00:00:00.51
  MHO%xe> select * from bla;
  
  MY_VA  MY_NUMBER
  ----- ----------
  AAAAA
  BBBBB
  11111      11111
  22222      22222
  CCCCC
  33333      33333
  
  6 rijen zijn geselecteerd.
  

• not able to connect to the database using the oracle instant client

  Hello
  
  I am not able to connect to the database using the instant oracle from my local PC client. They use to connect to the database files and sqlnet.ora files LDAP.ora. If I want to test the connection, I found this executable tns wasn't there, so not able to tnsping. So I'm not able to solve this problem.
  
  Please let me know if a solution for everything
  
  Client Oracle: oracle 10.2bFAT client 32-bit
  
  Platform: windows 7 64-bit
  
  Thank you
  Veera

  There is little that tnsping can do sqlplus can't.

  Instead of
  tnsping mydb.myorg.com
  Try
  sqlplus-s-L /@mydb.myorg.com
  or
  sqlplus-s-L user/[email protected]

  If you get
  ORA-12154: TNS: could not resolve the connect identifier specified
  you know that the customer could not resolve 'mydb.myorg.com '.

  If you get
  ORA-12541: TNS:no listener
  then "mydb.myorg.com" could be resolved, but there is no listener it running.

  If you get
  ORA-12514: TNS:listener is not currently of service requested in connect descriptor
  then "mydb.myorg.com" could be solved, the listener is in place, and the database is out of service.

  If you get
  ORA-01017: name of user and password invalid. connection refused
  you know that 'mydb.myorg.com' has been successfully resolved, and the database is running.

  If you want more details, such as how and what "mydb.myorg.com" is resolved, turn the tracking by adding the following to "sqlnet.ora:
  TRACE_LEVEL_CLIENT = ADMIN
  TRACE_DIRECTORY_CLIENT = C:\TEMP (a writable directory)

  Then you will find lines like this in the trace file:

  -THE INFORMATION SOURCE PARAMETER FOLLOWS-
  Attempt to load system pfile source C:\oracle\network\admin\sqlnet.ora
  Source of the setting successfully loaded

  Attempt to load the local pfile source C:\Dokumente und Einstellungen\lanadvall\sqlnet.ora
  The parameter source has not been loaded.

  This shows you which configuration files are read, followed by the settings real read.

  nnfgrne: will read if path adapters
  nnfgrne: switching adapter LDAP

  He's now looking for LDAP name resolution.

  nnfloidinfocache: Info: insert the value DIRECTORY_SERVSSL = oid.host.myorg.com:389 at index 0 in NLPA_CACHE

  These are LDAP servers, he is trying.

  nnflilc: conn sync opening of oid.host.myorg.com:389

  nnflfdn: turning simplified mydb.myorg.com name to a unique name.
  nnflfdn: using the administrative context: dc = prod
  nnflfdn: the domain name resulting is cn = mydb, cn = OracleContext, dc is myorg, dc = com

  nnflrne1: runs the directory for dn: cn = mydb, cn = OracleContext, dc is myorg, dc = com
  nnflqbf: search: Base: cn = mydb, cn = OracleContext, dc is myorg, dc = com, range: 0, filter: (objectclass = *)

  nnfgrne: query fails, the leap to the next map

  Did not work. Try the other adapters:

  nnfgrne: switching adapter EZCONNECT

  snlinGetAddrInfo: name resolution failed for test64.test

  No luck.

  If the resolution is approved, it will look like this:

  nnfloidinfocache: Info: insert the value DIRECTORY_SERVERS = oid.host.myorg.com:389 at index 0 in NLPA_CACHE

  nnflilc: conn sync opening of oid.host.myorg.com:389

  nnflfdn: turning simplified mydb.myorg.com name to a unique name.
  nnflfdn: using the administrative context: dc = prod
  nnflfdn: the domain name resulting is cn = mydb, cn = OracleContext, dc is myorg, dc = com

  nnflrne1: runs the directory for dn: cn = mydb, cn = OracleContext, dc is myorg, dc = com
  nnflqbf: search: Base: cn = mydb, cn = OracleContext, dc is myorg, dc = com, range: 0, filter: (objectclass = *)

  niotns: the call to address: (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=dbserver.host.myorg.com) (PORT = 1521)) (CONNECT_DATA = (SID = DBNAME) (CID = (PROGRAM = C:\Oracle\ora1020\bin\sqlplus.exe)(HOST=pc247596)(USER=lanadvall)))

  Yours,
  Laurenz Albe

• Not able to connect to the database using OS othenticated user.

  Hi team,
  
  We use HP UX servers, recently we pass the passive node to active (cluster OS) after that we are not able to connect to the database using OS authenticated the user, but I am able to conenct by user oracle sunig... !
  
  Please suggest me.
  
  Thank you
  Maurel.

  Please copy - paste the screen indicating the connection attempt with the authentication of the BONE and the error message.

• display value by default not filled when you duplicate the line

  All,
  
  I use the line duplicated in JHS key and when I click it, the line that is created doesn't not the "default value" completed for the fields are null. This can be the behavior desired in some / most cases, except that I use the 'display default value' property of JHS to pre-fill my primary key for my table using a managed bean.
  
  First of all, this is the desired behavior? Second, if it is can anyone suggest a solution to my problem?
  
  Thank you
  Paul

  Ah, second reading I understand that you're talking about the duplicate line feature. Always this function ignores the default values and will duplicate all items except the primary key. I recommend that you move that you code to fill the primary keys to the create method of the object of your entity class (you can move the logic of a generic superclass, if you wish).

  Steven Davelaar,
  JHeadstart team.

• New window Bookmark not filled with location and the name of Web site

  I just set up a new computer with firefox and import my favorites. I noticed that when I go to make a new bookmark, the fields are not filled for the fields name and location they are on my other filrefox facilities. I wondered why, and what can I do about it?

  Have you tried disabling hardware acceleration?

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.

• oject pro 8500 a HP printhead empty? do not fill in again with the new cartridge runs so out of ink? pls help

  HP officejet pro 8500 wireless, windows 7 sp1, 'y' cartridge must be replaced on-screen, no change in software.

  running out of ink during printing... draws 1/4 page and then fades down to nothing at the bottom of the page. History: necessary at the end of the work (a little), but completely run out of black ink. a friend gave me her used 1/2 940 gen ch black until I got a new. I have a new hp 940xl but it's always the same, I ran everything in the Toolbox align, feed, etc., but it will always print a full page? It's like the print heads are empty and do not fill the cartridge? Please help me. She was purchased on 29/11/11 but received 12/15/11 for my birthday children so its just out of warranty thank you, Darren

  It seems that the print head was filled with air. Once there, the air is very difficult to remove.

  try to clean the print head using the printer services.

  try to use your friends print head and see if it works

  You may need to just replace the printhead

• CREATING LIBRARIES DOES NOT DUPLICATE YHE SPACE IN THE LAPTOP

  Good evening.

  CREATING LIBRARIES DOES NOT DUPLICATE THE SPACE IN THE LAPTOP?

  TO SOLVE THIS QUESTION CAN BACK UP ALL MY FILES IN LIBRARIES?

  Thank you very much

  Good afternoon

  I'm sorry. I WASN'T CLEAR.

  WHAT I MEANT WAS: IF CREATE A FILE OR A FOLDER IN C: AND THEN I COPY THE SAME FILE OR FOLDER IN THE LIBRARY, I DOES NOT DUPLICATE THE SPACE IN THE LAPTOP. ?

  I DON'T KNOW TO USE LIBRARIES.

  FOR EXAMPLE, IF I CREATE A NEW FOLDER WHERE TO SAVE IT: IN C: OR DIRECTLY IN THE LIBRARY.

  THANK YOU SO MUCH FOR YOUR RESPONSE.

  I M SORRY MY BAD ENGLISH

  Hello

  The libraries contain all the physical files. They are virtual folders that display only the files that are located in other physical folders on the hard drive.

  See the following links for more details.

  Work with libraries:

  http://Windows.Microsoft.com/en-us/Windows7/working-with-libraries

  Libraries: Frequently asked questions:

  http://Windows.Microsoft.com/en-us/Windows7/libraries-frequently-asked-questions

  Libraries - Microsoft Windows:

  http://Windows.Microsoft.com/en-us/Windows7/products/features/libraries

  Concerning

• Add or table column to remove the database I have to rework for VO and EO?

  Hello
  
  I have a table called Employee
  I created the ViewObject (VO) and EntityObject (EO) in Jdeveloper.
  If I add or remove any column of the Employee table.
  do I need to recreate the VO and EO again. or it does not reflect the changes to the table automatically?
  
  Help, please...

  yshintre,

  You right-click of your OA and select "Synchronize with database" to have the new attribute added to your OA. You can then edit the original Version and add the new attribute by the shuttle in the list.

  John

• What to fill in 'field of the temporary table' for global temporary tables?

  Hello

  I use the Data Modeler 4.0.1.836 and everything that I put in the box 'the scope of the table temp' for a global temporary table doesn't seem to affect the DDL script about the ON COMMIT PRESERVE/DELETE the LINES option. The script poster ON COMMIT PRESERVE ROWS always anything.

  Yet, some of my temporary tables must be created as ON COMMIT DELETE ROWS.

  Using the Data Modeler wrote about it:

  Scope of the temporary Table:

  For a class as a temporary table, you can specify a scope, such as the Dimension or the Session.

  Not sure what 'Dimension' has to do with the scope here, but it makes no difference.

  I tried to put 'Session', 'Dimension', 'Operation', but no luck. So what is the text for the script generate ON COMMIT DELETE ROWS?

  Thank you

  Hello

  The temporary Scope of Table property (on page Types of Classification of the table properties dialog box) is purely documentary.

  To set ON COMMIT DELETE ROWS you must expand the browser for the relational model and find the node for the relevant Oracle physical model.  If you develop it you will find an entry there for your Table. Double-click on that to get the physical model properties dialog box for your table, and you will find a "Temporary" facility that has options (Preserve Rows), YES (Delete Rows) YES or no.

  David

• Find a column name in the database.

  I'm new to this forum, SQL and databases of my businiess and mostly self-taught to start. So I do not know one of the databases that we keep has a column called UNIT_PRICE, is there a way for me to get Oracle SQL Developer find all databases with columns named which?

  select owner, table_name, column_name
     from all_tab_columns
   where column_name = 'UNIT_PRICE';
  

• Why not work data fusion in the mount table?

  I try things and I can't datamerge working in the jury of the dough.  is there a way to make this work?

  If you set a variable placeholder out in the mount table and own a part of it continue on the page, it will work. Place a variable in the slug area will not work without touching a part of the page.

  

• not able to connect to the database users

  Hello
  
  
  OS Oracle Solaris on SPARC (64-bit)
  database version 10.2.0.2
  
  
  
  There was a problem, one of the database, most of the applications were unable to connect, only 1 or 2 managed applications to connect, which totalled around 4 to 6 hours. Once the database has been recycle everything was ok, so what could be the reason? I have too many words from sr oracle, oracle specified as there was a sql with 13000 executions, also as 2 users have tried to update the same row in the table, so that users must commit frequently, just read the lines highlighted. My question is if there is a conflict of line, that would restrict other applications to connect to the database. And after reboot, everything was normal. I m wondering as is the resource_limit or max execeeded processes at this time this is why not able to sign in as user applications oracle unable to generate new processes.
  
  As I mentioned in the SR #, users could not establish connection to recycling of the database at all. So what is the root cause?
  
  
  
  
  Support of Oracle - December 06, 2010 16:01:13 GMT - 05:00 [Notes]
  
  Generic note
  ------------------------
  Report from the WORKING REPOSITORY for
  
  
  Snap Id Snap time Sessions sliders/Session
  BEGIN Snap: 14408 26 November 10 17:00:18 258 32.0
  End Snap: 14413 26 November 10 22:01:02 185 28.0
  Elapsed time: 300,74 (min.)
  DB time: 31,230.47 (min.)
  
  
  
  
  Top 5 timed events
  
  Event waits time Avg Wait (ms) % Total call time wait class
  enq: TX - 633 699 1 855 919 line lock conflict 99.0 2 929 Application < < < < # 1.8 million secondsdb file sequential read 2 434 765 11 577 5.6 user I/O
  Time CPU 7 758.4
  db file parallel write 269 025 1 012 4.1 system I/O
  db file scattered read 227 528 889 4.0 user I/O
  
  
  Time elapsed (s) hour (s) of the CPU executions Elap by Exec (s) % Total DB SQL SQL SQL text Module Id at the time of
  1 530 609 25 13 497 81,68 113.40 b3fzxpwsmj044 llserver@linkvprad1 (TNS V1 - V3) update KID set ID = ID + A1: where...
  
  
  single command which is close to 1.8 million seconds.
  
  update of b3fzxpwsmj044 KID set ID = ID + A1: where IDType = 0
  
  Segments of line lock waits
  Capture shows the line lock % % expected for each upper segment by report
  with the line total lock waits for all segments, captured by the snapshot
  Tablespace name object name subobject name owner Type obj. line lock waiting for Capture %
  TAB_ADM TAB_DATA KID TABLE 208 95,41 < < < < # object with line lock waits for even that above command
  
  
  UPDATE
  ========
  Hello
  
  It seems that many people have tried to run the same day order at the same time.
  (more than 13,000 executions)
  
  Update KID set ID = ID + A1: where IDType = 0
  
  and segment shows the same table.
  
  It is an application problem, two people can not update the same rows at the same time.
  OR
  After that the users update must initiate more timely work.

  sb92075 wrote:
  ..., but this has NOTHING to do with the connection problem & or not posted anything else.

  Not so sure. Is this connection to database, or application? The OP wrote "+ one of the basis of most of the applications were not able to connect, only 1 or 2 applications has managed to connect +", don't know what that means exactly, depends on how the application manage the connection. It can start with the search/update of this table where the problem may come from.

  Nicolas.

• Tool for creating paths and not filling of forms

  I'm pretty sure that I am a fool here, but I just can't understand this stupid problem. I haven't used forms custom in some time, but whenever I try to create any shape, rather than the filling with my fill color, it creates multiple paths below. I can not turn that a selection, I can't fill it, I can't do anything with it. Please, someone, put me out of my misery! What I am doing wrong?

  

  This tool can create forms, fills and path. If Fits draw a path with the tool in route mode that your display is what you get.  If you use the menu drop down and change of form.  The exact screenshot, this is what you will see.  However in route mode there are three buttons in the tool bar selection, mask and shape option. If you use the button shape that the path will be used to make a shape layer.