creating dimension with several LTS problem

Similar Questions

• Unable to create cache with several tables group

  Hello
  
  I need to create a group of cache with several tables, which are referential to the other.
  
  There are 2 related tables and table 1 child...
  While trying this thing, it gives me an error:
  
  8222: multiple parent tables found
  
  It is not possible to use several tables of root in a single cache group? Is there another way to use it?
  
  Script, I used is:
  
  create a cache group asynchronous writethrough TEST. CG1
  of the TEST. ROOT1)
  KEY PRIMARY ID VARCHAR2 (8 BYTES),
  NAME VARCHAR2 (50 BYTE),
  DESCRIPTION VARCHAR2 (255 BYTE),
  POLICYTYPEID VARCHAR2 (7-BYTE)),
  
  TEST. ROOT2)
  PARAMTYPEID VARCHAR2 (5 BYTES) PRIMARY KEY,
  PARAMETERUSAGE VARCHAR2 (1 BYTE),
  NAME VARCHAR2 (25 BYTE),
  DESCRIPTION VARCHAR2 (255 BYTE)),
  
  TEST. CHILD1)
  PARAMDETAILID NUMBER (20) PRIMARY KEY,.
  ID VARCHAR2 (8 BYTE),
  PARAMETERUSAGE VARCHAR2 (1 BYTE),
  DISPLAYVALUE VARCHAR2 (255 BYTE),
  OPERATORID VARCHAR2 (5 BYTE),
  VENDORID NUMBER (20).
  FOREIGN KEY REFERENCES TEST. ROOT1 (ID),
  TEST KEY (PARAMETERUSAGE) REFERENCES STRANGERS. ROOT2 (PARAMETERUSAGE));

  You can't have multiple root within a group of cache tables. The requirements for tables in the group a cache are very strict; There must be only one top-level (root table) table and there may possibly be several children tables. Tables of the child should be linked through foreign keys to the root table or a child table above in the hierarchy.

  The solution for your case is among the tables of root and the other root table in a separate cache group and the child table in a cache group. If you do this, you must take care of a few things:

  1. you cannot define foreign keys between the tables of groups of different cache in TimesTen (keys may exist in Oracle) so the application must enforce referential integrity itself for these cases.

  2. If you load data in a cache group (using LOAD the GROUP CACHE or "load we demand") and Timesten will not automatically load the corresponding data in the other group of cache (since he doesn't know the relationship). The application must load the data into the other group of cache explicitly.

  There is no problem with transactional consistency when changes are pushed to Oracle. TimesTen maintains and reinforces the coherence transactional regardless of how the tables are arranged in groups cache correctly.

  Chris

• Create table with several Collections of data control

  Hello

  I have a requirement about to display data in a table. It shows simple, but certain columns in the table are within a collection, and the others are in another collection. I read this chapter Creation of ADF Databound Tables - 11 g Release 1 (11.1.1.7.0), and she explains to create the table with a collection.

  I have no knowledge on the model, I know just as control data, so what should I do? :

  -Ask for the template designer to redraw the control of data to include a collection with all the data?

  -Try to work with the actual data control? If so, how can I create the table several Collections of data control?

  Plese let me know if there is another solution. I work with JDeveloper 11.1.1.7.

  Thank you!

  AAPDL

  Hello

  You can have a managed bean that e... g exposes an ArrayList of objects. This can then binds to the value property of the table. If the object sets the information of table row combination that you get multiple iterators (collections), then the table will display the joined data.

  Frank

• Problem with several adapters and Jar file included in a service.

  Hi all

  I'm new here and I am ready to work with the VMWare client sdk. I have already started and exported several adapters to implement the full functionality that I need. However, I get an error:

  Request context failed to create 'com.management.serviceprovider' in ' 1.0.0 version. org.springframework.beans.factory.BeanCreationException: error creating bean with name 'DatacenterConfig': calling the init method failed; nested exception is org.springframework.beans.factory.CannotLoadBeanClassException: cannot find class [com.adapters.Datacenter.ClusterConfigAdapterImpl] for the beans with the name 'ClusterConfigAdapterImpl' defined in URL [bundleentry://281.fwk1147580192/META-INF/spring/bundle-context.xml]. nested exception is java.lang.ClassNotFoundException: com.adapters.Datacenter.ClusterConfigAdapterImpl finds do not bundle [com.management.serviceprovider]

  at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.initializeBean(AbstractAutowireCapableBeanFactory.java:1455)

  at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.doCreateBean(AbstractAutowireCapableBeanFactory.java:519)

  at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:456)

  to org.springframework.beans.factory.support.AbstractBeanFactory$ 1.getObject(AbstractBeanFactory.java:294)

  at org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingletonBeanRegistry.java:225)

  at org.springframework.beans.factory.support.AbstractBeanFactory.doGetBean(AbstractBeanFactory.java:291)

  at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:193)

  at org.springframework.beans.factory.support.DefaultListableBeanFactory.preInstantiateSingletons(DefaultListableBeanFactory.java:591)

  at org.springframework.context.support.AbstractApplicationContext.finishBeanFactoryInitialization(AbstractApplicationContext.java:918)

  to org.eclipse.gemini.blueprint.context.support.AbstractDelegatedExecutionApplicationContext.access$ 1600 (AbstractDelegatedExecutionApplicationContext.java:60)

  to org.eclipse.gemini.blueprint.context.support.AbstractDelegatedExecutionApplicationContext$ 4.run(AbstractDelegatedExecutionApplicationContext.java:325)

  ...

  This error occurs very often and it's strange because I place the cards together in a same way. Here is the OSGI layer and contaxt bundle files:

  Context Bundle:

  < name of the bean = "ClusterAdvancedAdapterImpl" class = "com.adapters.Datacenter.ClusterAdvancedAdapterImpl" >

  < constructor-arg ref = "dataServiceExtensionRegistry" / >

  < / bean >

  < osgi:service id = "DatacenterConfig" ref = "ClusterConfigAdapterImpl".

  interface = "com. VMware.vise.Data.Query.PropertyProviderAdapter"/ >

  < osgi:reference id = "dataServiceExtensionRegistry".

  interface = "com. VMware.vise.Data.Query.DataServiceExtensionRegistry"/ >

  And I really don't know why this isn't a job.

  The second problem is that I have another project with classes and I want to export it to a jar file. When I do this I also want to include this pot in the bundle, but when I change the ant file it does not work on virgo.

  Any help will be appreciated.

  Kind regards

  Stefan

  For option 2 which he question in post above, you can use the piece of code below in the Ant script in the target of the compilation at the end.

  --------

  -----

• I'm trying to create a PDF file with several signature lines in that anyone can "Sign" by using their digital signature CAC (Common Access Card) active. The goal is to have a single document that people can open, sign on a designated line and save the doc

  I'm trying to create a PDF file with several signature lines in that anyone can "Sign" by using their digital signature CAC (Common Access Card) active. The goal is to have a single document that people can open, sign on a designated line and save the document (replacing the existing document) and close. Then another person can open the same document digitally sign another area of the form, save it, and close it. So on, and so on. Is there a way to do this? At the end of the day, I would end up with a PDF file with literally hundreds of signatures to enable different ACC everywhere...

  I don't understand what the problem is. In the post of the davidr96549424 on May 8, 2015 07:58 you presented a structure of a correct document. Is the issue of the creation of this structure in a PDF file? For this, you will need an Acrobat, not reader.

  XI in Acrobat, select Tools-> forms-Edit. Click 'No' on the form fields 'detect '. In the tasks Panel that opens, click on "add new field". Select "Digital Signature" and move it to the location in the document where you want to than the appearance of the signature to be. Repeat that for signature fields as you want. Users will sign by clicking on the prepared unsigned signature field which shows the dialog box "sign. Do not forget that as TSN has noted that a digital signature applies to the entire document. The entry in the document where it is is irrelevant. Each next signature covers all previous signatures.

  Your users can also sign a document from anywhere that they want without signature fields already prepared. For this select fill & sign-> work with certificates and the type of signing you want to sign up with. A dialog box that will tell you a rectangle for the appearance of signature rises and after you draw the rectangle of the dialog 'Sign' rises.

  PDF/Acrobat doesn't have a limit on a number of signatures in a PDF document. But! Don't forget that when you open a PDF file with Acrobat/Reader signatures valid all of them and takes time (several seconds - until 10 - for every signature), so if you have several signatures of dozens of their validation open can take a long time.

  I don't know how build you your workflow so that each person signs the same PDF and saves it. Economy runs on the same computer where the PDF is stored. You'll have to decide how to allow different people to have access to the same PDF. They, of course, you may sign this only one-at-a-time PDF.

• I created a PDF form with several drop downs, all with the same drop-down values. When I select a value of 1 in the drop-down list fields, it breeds in all others - which I don't want. How can I fix?

  I created a PDF form with several drop downs, all with the same drop-down values. When I select a value of 1 in the drop-down list fields, it breeds in all others - which I don't want. Can I fix?

  I am fairly new to this, but I think it has to do with the way you have drop them downs named. Copy you a then keep stick in each area? If so, that's the problem. You must rename each with a different number: Dropdown1, Dropdown2, etc. I think this might solve the problem.

• Problem of size of form with several Digital Signatures

  I created a form (liveCycle 8) with several digital signatures.  When each user signs the form, this section of the form is locked using collections.  The form is workflow by email after each user connects it.  Whenever the user signs and submits the form, the size of the form becomes too great.

  How to optimize the form to compress whenever a user signs the form?

  Thank you

  Lori

  Steve,

  After your request to publish the form, I wanted to remove some elements of society, such as the Logo.  Once I removed the Logo, I found that the biggest problem was a Logo image size which was the large file.  Once I reduced the size of the image, added only 46 KB signatures at each level of signature.

  Thank you for your help,

  Lori

• problem with several graph XY axes

  Hallo,

  I'm tracing different variables in the same plot with several axes. I have the following problem (see attachment)

  the y axis secondary on the right side of the plot has a large area of him and one of the other secondary axis falls right above others. I tried it in the two labview 8.2 and 8.5 with the same results.

  any ideas?

  Thank you in advance,

  Thodoros

  Try the following movements:

  Right-click-> popup menu-> advanced-> reset scale layout

• Creating a DVD with several file format of files/best project for export (PE13)

  Hello! I first 13 (just improved 10) elements and trying to figure out the best way to save my movie on DVD. There are at least two different project files (the film, shock and eventually a video "making of") that I want to put on the same DVD with a menu. A couple of years, trying to do this with first Elements 10, I could not get it to work and had to use a separate DVD menu software. I can do that again, if I need to, but the software I used was lost, so I thought I would check to see if it can be done first before going to buy it again.

  If I can't do it in first, I need advice on the best format to save project files to burn to DVD later. I'm a novice, and most of these sizes looks like gibberish to me! I had problems in the past (a few years ago) with a black border appears around the film, after he was saved, reducing the size of the movie, and I'm hoping to avoid that...

  The film is about 1 1/2 hrs long

  The blooper reel is about 17 minutes

  If there is more info to help answer my questions I'll be happy to find it!

  alsyarn

  Thank you for the important information for troubleshooting your Premiere Elements burn on DVD-VIDEO to DVD disc so that it presents throughout without black borders.

  Open the first elements 13/13.1 to his Expert workspace, go to file Menu/New/Project and set the project preset manually to

  NTSC

  DV widescreen

  Do follow the following order

  • Open the project in the workspace Expert and go to file menu/new project and change the settings.
  • In the settings, set the project preset to NTSC/DV widescreen. OK to get out of there.
  • In the dialog box new project opens, rename the project and make sure you have a checkmark next to the "Force selected setting on this project." OK to get out of there.
  • In the Expert workspace, import your media source by using Add Media / choice.

  Import your Source 3 (720 x 480 widescreen display 16:9) - which should occupy all the space area monitor Edit which is a space of DV widescreen size.

  Import your Source 1 (1920 x 1080 16:9)-that must fill the space of the monitor Edit once the scale is automatically just to fill the space of the Edit monitor.

  Import your Source 2 (720 x 480 which is what is because it has a format of 1.0 pixels)-that does not fit properly. Balance this video in Edit area monitor to enter space monitor without black borders.

  It is unclear why the project 720 p settings have been set for this instead of NTSC DV widescreen. But please implement your project as described above, then export as suggested.

  I have suggested above based on destination DVD VIDEO to DVD disc. When you have a montage with several formats, you set an adjustment everything with scaling in the monitor area space Edit put in place by the predefined project and major. General guideline - the project preset should correspond to the properties of the media source... and with more than one type of format, you define major and if adapt everything with scaling if you don't want black borders.

  Another tip... When you want to scale width and height separately in edit box monitor, first go to applied effects tab/Applied effects Palette/panel of the selected clip expanded Motion and remove the box keep the Proportions.

  Please consider. And then we'll try to condense all that into a workflow that will work for you.

  Thank you.

  RTA

• I want to go back to the previous version of 2014.2.  .3 is far too buggy and full of error messages. Create problems because I'm on a timeline with my client and I don't have time to fool around with all the problems.

  2014.3 is far too buggy and full of error messages. Create problems because I'm on a timeline with my client and I don't have time to fool around with all the problems.

  You don't mention what you have encountered errors? Workaround for the problem more frequently reached here is Re: error in Muse: object UID:U6875 has two (or more) owners: U3633 and U3165

  If you have a copy of your .muse file that has not been saved by using 2014.3, you can downgrade by uninstalling Muse, and then choose the previous Version in the drop-down list of filters in the Panel of Apps from the desktop creative cloud application. There will be a popup next to the Muse, where you can select a version prior to install.

• How to create a subform with several rows initialized?

  I have a repeating subform on my form that should start with several lines initialized.

  I can create several blank lines by setting the binding "repeat subform for each data element" and set the number of 'min', but I would like to have values in one of the columns so that doesn't happen.

  I can create multiple instances of my subform named and initialize the value of the column in question, but then if I have the "repeat subform for each data item" checked I get additional dups, but the first row and the button Delete (right-click action "this.parent.instanceManager.removeInstance (this.parent.index);" ')»» and Add button (click an action "_rates.addInstance (1)" "") erratic behavior.  I mean here the button Add adds sometimes lines with values that have been deleted previously, and the delete button sometimes a warning saying something like "topmostSubform [0]: Page1 [0]: rates [10]: delete_button [0] .click on Index value is out of range.

  There is no connection to a data source where I could get the values for the column, I want to initialize.  In my opinion, I'm close, if only I could find the correct settings for the links palette.

  Thanks for your suggestions!

  If you have columns and rows, why not use a table instead of subform...

  Check the setting of binding to "repeat the line for each data item.

  Add the button 'Delete Row' to each line in the last column.

  Add the button 'Add Row' under the Table.

  Add text fields to the columns that you want the data displayed / modified by the user.

  I hope this helps.

  If not, let me know...

  Thank you

  Srini

• Several pop-up windows "Security Fix" indicating the many problems w/computer & scan to see what they were. returned with several "critical" errors & several "warnings".

  Original title: fix the system

  While the site of the car got several popup windows "Security Fix" indicating several issues w/computer & scan to see what they were.  Do that & came back with several "critical" errors & several "warnings" says had to buy the program to correct.  Then stop computer & when turned on the next morning the only office was trash & start menu is empty with the exception of all programs.  Went to windows defender for all programs & said it was off?  I didn't turn it off & when trying to turn back & says cannot open program, error 0x800106ba.  Help!

  Do you have any antivirus, in addition to Windows Defender?

  System Fix is a fake program aimed at obtaining the payment card information. If you have used your card with it, contact your card provider immediately.

  There are instructions to remove the difficulty here:

  http://www.bleepingcomputer.com/virus-removal/remove-system-fix

  Use only written instructions. Do not download anything from advertising on the Web site.

  This program can damage your computer and the removal instructions may not be completely effective.

• Can I create a Google Map with several points?

  I am building a Web site for a company with several companies, and they want all appear on the map. In the standard Google maps widget, you can add only one address. Is it possible to add multiple addresses without scripting?

  You can always add placements more once you have published the site by editing the source code. Otherwise simply don't use the widget and enter the code clean Google according to custom HTML.

  Mylenium

• Dynamic region with several task page fragment flow isn't refreshing VO

  JDeveloper version is 12.1.3 and Weblogic Server is 12.1.3.

  We have a dynamic region with several task page fragment flow.  We have created a menu that will open on the workflow task in the dynamic region. Before defining the workflow id in the bean, we execute query on the original Version after setting the bind variable. When we click on the menu is open the flow of relevant tasks in the region and showing the Original data table.

  But when we open the same request again to a different browser session, it shows all the data in the original Version when the user clicks on the relevant menu item...

  I have attached the code used to navigate to the different workflow tasks written in the bean from the back of the home page.

  We have no idea why anyone what happens, if it's a server problem or a code issue. Because unless and until we open the target application in a new browser it works fine.

  We tried and deployed on a remote server as well, but it gives the same question...

  Would be really grateful for the help...

  The user, the code you posted has some serious problems. Never, I repeat never store a reference to an application module in a static variable in a bean. That is why you see only data once. After that, the second session reuses the application module from the first to the configuration data, but to display data it uses a module different application.

  The way you try to configuration data is too bad. You must pass the parameters to the workflow and init data in the default action of the workflow instead of doing before installing the new workflow id. A workflow is a unit of work that is kind of a black box. You may not assume that the stuff you do outside of this black box can be seen inside the box. This is only true if the workflow share the same control of data as it's parent (share of data control).

  I suggest you read some documents on the workflow and how they work. A good start is to look at this video https://www.youtube.com/watch?v=A3CmDhWHaG0

  or work through this tutorial 12 c (12.1.3) Oracle JDeveloper tutorials - working with bounded task flows, regions and routers

  Timo

• I've just updated to Photoshop, CC 2015.0.1, and I can't do 'Quick export in PNG' with several plans to work more? Any ideas?

  Update Photoshop CC 2015.0.1, I can do is no longer the 'Quick export in PNG' with several work plans more.

  I currently work with about 10 + work plans and I normally ' file > export > rapid export in PNG ", I had no problem in the previous version of Photoshop, but since I updated yesterday to the latest version, is no longer shows the pop-up asking where I want to save the png and instead" does nothing?

  Any ideas?

  Thank you

  Rob

  Please try and reset the default Photoshop preferences, if you do not customize your Photoshop after the last update.

  Steps to follow:

  To re-create the Photoshop preferences files, start the application while pressing Ctrl + Alt + Shift (Windows) or command + Option + shift (Mac OS). Then, click Yes to the message, "Delete the Adobe Photoshop settings file?"

  Let us know if that helps.

  Kind regards

  ~ Mohit