Creating recovery disc.

Similar Questions

• Satellite A505-S6005: creating recovery discs power calibration error

  Hello

  just bought a satellite A505-S6005 and try to create recovery discs.
  I am using Dynex DVD - R.

  He created the 1st disk after the slightest mistake 2 times and when I started the 2nd drive continued to get again the message that is OE01BS-26 error Code - 2 said A 037303 power calibration area error occurred, check the disk for dirt or scratches.

  The disks are not scratched, and after going through 5-6 discs wonder if something is wrong with the optical drive & not the disks.

  Any help appreciated.
  Thank you.

  Hello

  I think it's a problem with your DVD media
  You are using incompatible disks!

  Try different DVD from different manufacturers.
  I m using the Verbatim or TDK DVD-R and my CD/DVD drive handles these discs without problem.

  Check it! I'm sure this will help you!

• Satellite L500 - cannot create recovery discs - 0D00F6-49-00000001 error

  Hello

  My pc start up after that I did a system restore. For example, I can't use the function fn key.

  Last week I tried to format my pc. But when I opened the TOSHIBA Recovery Disc Creator got an untimely error 00000001-49-0D00F6.

  I've managed to create 2 4 DVDs. IM using Dvd - r from memorex.
  If anyone can help.

  Thanks in advance for your help.

  This is the first time that you try to create recovery discs?

  How you created 2 discs if the Toshiba recovery disc creator starts by mistake?

  Anyway, in this forum you will find similar topics. No doubt some recovery file is damaged, and the drive could not be created.
  I put t think that there is something that you can about it. Either it works or not. Maybe you should contact the nearest Toshiba service and explain the situation. I hope they can help you with this and disc Toshiba DVD original to order for you.

• How can I continue creating recovery discs?

  Hello! I just bought a HP Pavilion dv6-3011so, and told me to create recovery discs as soon as I had installed the computer. I read in the manual that I stopped the creation and that the next time I opened the Recovery Manager he asked me to continue and to insert the following DVD and so on.

  As it was getting late, I decided to stop creating and continue the next day (today), and I opened up to Recovery Manager. He didn't ask me to keep anything. I Googled it and couldn't find any information, not even on the HP website. I don't know if I should choose "Creating recovery discs" once again, but I think it will only begin to calculate how much Swedish I will need? Or it will not start calculating where I was when I interrupted the creation yesterday (I had just finished disc 2 of 6)? I don't want to do anything until I know for sure I do the right thing, because I feel that this can never be done again.

  Please help me!

  Hello

  If you restart recovery disc creation, it should carry from where you left off.

  Best wishes

  DP - K

• Creating recovery disc for the VGN-NW220F laptop

  I followed the instructions and got the on-screen Vaio Care, but under "Recovery and restoration", there is no option to create recovery discs.

  When I clicked on your link to Vaio Care, I was taken to the Vaio Update options. I tried to install all of them, without success.

• Possibility of creating recovery discs isn't available.

  I want to create recovery disks for my HP Pavillion 2260 - EA, Windows 7 64 bit, but the option is no longer available in my HP support Assistant. I selected the option once, but had to cancel because he wants more DVD discs I've owned. I then bought several discs. Now the option is no longer available for me to choose.

  In my view, we can only create recovery discs once. The PC noted, therefore, that I used this option, when in fact I've never really done. Can I do now?

  -Mike

  Hi, it is possible Action Center of this HPSA saw this task as completed and this is why it is not.  I recommend that you try to access the Recovery Manager through the start menu. If you select all programs from the start, you should see a list for safety and Protection, click on that and then click on Recovery Manager and finally, you should see a list for the creation of recovery media. Clicking on that brings you to the creation screen.

  If for some reason that there is no option, the only solution I know of "reset" of the option of creating media is to perform a recovery of HP sent a recovery media. Performing a restore partition recovery will not work.

  Hope this information helps. If you need help, please ask.

• Creating recovery discs - "unable to open the following file" error "

  Hello all,.

  I'm trying to create a set of recovery disc for a customer * Satellite L300 - PSLB8A-07U004 *.

  While the application opens and begins the creation of the disk set, there, three times now, failed to with the error message of * 'cannot open the following file. D:\ ! "V5_01_07.VRP (error Code: 020123-F1-00000000). *

  I tried the first time in this process while all customer data were always loaded.
  I have now done a "restoration"out of box experience"because I thought that one of these files may be the cause, but, alas, the mistake was repeated."
  Of course, it's irritating (to say the least).

  I did NOT any changes to the layout or resizing of partitions. »

  Any thoughts?

  rampant_rhino

  Stand by. If I understand you well you CAN restore the operating system using F8, but you CAN create DVDs using "Toshiba Recovery Disc Creator' of recovery.

  Am I right about that?

• Created recovery disc is ok, but does not start Satellite A300

  Hello
  as the title suggests, the disks fail to start, details below formatted for reading easier (I hope :))

  -All-new series Toshiba A300
  -J' have created a disk of restoration with the toshiba utility, there was no error, the files are there but the drive seems to be unbootable.
  -This happens with both attempts, I made, using Verbatim r and Sony + R media.
  -The recovery disks will NOT start on my desktop system either.
  -L' laptop starts fine with a couple of distributions Linux on CD - R.
  -J' use F12 to tell the laptop to boot from the DVD.
  -J' have much experience dealing with the LiveCD, bootable disc burning, etc., so I'm inclined to think there is a problem with the toshiba utility.

  Any help will be much appreciated. Thanks in advance.

  Hello

  There is certainly nothing wrong with the Toshiba Recovery Disk Creator.
  I burned the recovery disc too. Once it failed because I did not use fully compatible DVD. Then I tested it with TDK - R and everything went well.
  No errors, nothing. Finally, I booted from the DVD and could reinstall the OS too.

  I presume that you should check the other DVD.

  Good bye

• Re: Satellite A300 - error creating recovery disc

  I'm not really providing any solution, but is facing a similar problem with my laptop Satellite A300-1EI, bought in Dubai, UNITED Arab Emirates. I tried to make records of recovery through Toshiba Recovery Disc Creator. However, each time, I got an error message. I tried with Verbatim, Philips DVD-R and lost several DVDs. Meanwhile on the net surfing, I discovered that the engraver of DVD from Toshiba is a little sensitive and try to use Verbatim DVD - R brand. I tried with Verbatim 2 days and at the last moment when I was about to dance with joy that the first DVD is created, received an error like below

  * "The following issue occurred during the recording of the data of the disc.*
  Current process will be stopped.*

  * A power calibration area error occurred.*
  * Please check if the disc is scratched or dirty.*
  * If Yes, please try again with a new disc.*

  "* (Error code: 0E01B5-26-00037304)."

  I don't really understand the message. Can advise you on how to create the recovery disks.

  Kind regards
  Vijay

  Hello

  To me, it seems that the used DVD discs are not completely supported by ODD.
  It seems to be a compatibility issue.

  I had this problem in the past, but I could resolve it using another DVD from another manufacturer.
  I had a good experience with TDK DVD-R.
  Using the R disk I was able to burn the disc, but using the + R I received an error message.

  See you soon

• create recovery discs

  I'm trying to create a set of recovery disc for my office after the restoration of the Vista system with a set of HP recovery disks.  It crosses the 1st disk, but when he goes through the verification process I get an error message that says: there was an error writing to the disk.  I use a single disk DVD writing.  These discs have worked on another of my systems, then why do they will not work on this system?  This happened with 2 discs now, so how to solve this problem?

  = Order restore (recovery CD) online disks, yourself, without call HP. ===
  
  Follow these steps.
  
  1. go to the website of HP - www.hp.com/support.
  
  2. Select the country or region.
  
  3. we see - Support and drivers at the top > click on drivers and downloads of the software > enter product name/number.
  
  4. Select the operating system. > Click Next.
  
  5. at the bottom of the screen it would list available updated drivers and software for the computer.
  Among it, you would find an option of order recovery media if the disc is available with HP.
  
  6. click on the order recovery media > the page will be redirected to - software support and command pilot.
  
  7. enter serial number > click Next > enter the postal Code and the follow-up on the instructions on the screen.

• HP Pavilion dv5-1012ea Vista Home P can not create recovery discs

  Hello
  A brand new shinney note book (hours old) followed all instructions verified the files help and FAQ but still cant Recovery Manager to create recovery disks
  IM using dvd + r than recommended Recovery Manager finishes the collection of long lines of process then shows the message error "warning disk image file exceeds 0 MB process cancelled. Enjoyed all the tips.

  Contact HP (in your country) and the recovery discs sent to you.

• Creating recovery discs - what kind of discs to use

  When you go to the creation of recovery media it is said to use DVD-R discs. Does this mean that you can not use CD - R discs to create recovery media? I have a stack of new CD - R discs, that I like to use, but I don't want to spoil it. Recovery Media Creator says that you can create once discs which is scary, because I made the bad front discs. Guys do you recommend a particular brand of discs? I want to make sure that the recovery disks to burn properyly.

  -CD R discs too small @650 MB.

  DVD-R media is 4.7 GB and that is why it is the standard used.

  The best support for DVD is generally accepted to be JVC Taiyo Yuden

  Best regards
  ERICO

• SL500 new w / XP - failure internal error creating recovery disc

  I tried several times to create my Windows XP Recovery disk set (license is for Vista with downgrade to XP).  Whenever I get this error during extraction of the files operation: internal year error has caused this process to fail.  This occurs also during "create rescue media.  How can I fix?  Is there a file that can be downloaded?  I really need to create my discs of recovery, just in case... and I do NOT put upgraded to Vista.

  Any help or assistance will be greatly appreciated

  Ann

  Call lenovo support Office, explain your problem and ask you to send a Rescue and Recovery disk free.

• HP Pavilion g6-2320tx Notebook PC - recovery disc is scratched on the other creating recovery disc

  HP Pavilion g6-2320tx Notebook PC - recovery disc is scratched on the other how to create the 2nd recovery disk recovery disk

  Please contact the official support of HP in your region / country, HP support worldwide Portal, to see if the HP recovery support is available for your computer.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• When should I create recovery discs?

  
  

  Hello

  You must create your recovery discs now. These discs are created from information held in the recovery on the hard drive Partition, so any OS update etc don't appear - they never reinstall the operating system in the State it was when the machine was purchased everything first.

  Best regards

  DP - K

• Win 7 64 bit... HP Pavilion dv-7... Creating recovery discs... Years later... Problem of recovery?

  Discovered that I never did the recovery disks when I bought the HP Pavilion dv7-4073nr Notebook running Win 7 64 bit.

  Now, because Windows Updater does not work, some programs do not work.  (Have no idea, when he started).

  QUESTION... -What makes the recovery discs now, cause recovery issues when I do an "upgrade on the spot", as recommended by a cat of Microsoft tech?

  There is no virus, the tech ran remote diagnostics and confirmed what I already knew... Windows Updater is corrupted and are not accessible.  Bought a 3 TB external drive and have spent - hours and hours - backup with Win 7 Backup & Recovery tool and the Seagate dashboard. (Redundant).  I can NOT apparently make an Image of the 'system' (failed to backup MS 5 times... So I created a backup successful without it.  Then tried to just an image of the system and says there are files corrupt on C drive.  Has managed to create a system repair disc.  Since then, I try to understand what I'm going along, Kind ' needs to know about the recovery discs, I do now works, or if I'm just recreate the same problems?

  Thank you

  Diane

  Make recovery discs now lets start the laptop and do a fresh install.