Creating recovery DVDs and deletion of Partition

Similar Questions

• Can I create recovery DVDs after installing Windows XP Home edition?

  Hello

  I have a laptop Toshiba Satellite L300. I formatted the c drive and installed windows xp, but soon I realized that I forgot to create a recovery disk.
  Now the F8 does not work, but the drive d and hddrecovery the folder that contains the files of Toshiba recovery still exists. 3.8 GB of data is located in this folder.

  Is it possible to create a recovery disk now. Thanks already.

  Hello

  Recovery DVDs can be created with the special tool only. The name is Toshiba Recovery creator. This tool is part of the Vista installation only factory settings.

  So now, you can not create recovery media and there is no way to launch the installation of F8 HARD drive recovery. I do not understand why you ignored Toshiba reminder on creating recovery DVDs.
  Anyway, you can order the new copy under https://backupmedia.toshiba.eu/landing.aspx

  Bye and good luck!

• Windows 8 fact Full Reset will reformat the HARD drive and delete the Partitions?

  Hello

  as well as the State title,

  1 *-Although do a Factory Reset in Windows 8 or 8.1 reformat my HARD drive and delete my partition? OR

  2 *-my Partiting created will remain untouchable with all the files I have storage here?

  Thank you in advance...

  Hello

  as well as the State title,

  1 *-Although do a Factory Reset in Windows 8 or 8.1 reformat my HARD drive and delete my partition? OR

  Only the drive on which Windows 8/8.1 is installed will be formatted, other partitions or hard drives will not be formatted.

  2 *-my Partiting created will remain untouchable with all the files I have storage here?

  Yes, it will remain unchanged.

  Thank you in advance...

• Toshiba Recovery DVD and new partition

  Hello

  1. my Toshiba Satellite M40x-230 came with a recovery DVD.
  2. the HARD disk had only a single partition to 80 GB, but I divided by 2, so that I can keep my personal files in one (of :))

  My recovery DVDs would allow me to keep the D: drive and reinstall only the stuff on the C: drive?

  I don't want to try, just in case he proceeds to the removal of the partition!

  Please notify.

  Hello

  Yes, it will allow you to install the OS on the C partition. You should just use the installation in expert mode. On this forum, you will find a large number of subjects with description how to do this.

  If you need help, write again.

  Good bye

• I have a hp compaq pressario c797ee, I not create recovery disk and lost data. Help, please.

  I not create recovery disks, in fact could not create because the DVD could not be the installation program appropriate for the burn. When I realized how do it, I had already deleted the recovery partition and had lost data recovery. The name of product HP Compaq pressario C797ee, the operating system is Windows Vista Home Basic Edition. Please tell me the link where I can download the recovery disks from which any alternative appropriate.

  Hello

  Please use this:

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?objectID=c00810334

  Kind regards.

• Portege R600 - cannot create recovery DVDs

  Hello! I just bought Toshiba Portege R600-146 and attempted to create a DVD with the system recovery but DVD drive does not recognize DVD discs and fails the diagnostic test PC CD/DVD Toshiba. I can't even create a backup of the system.

  Is it a software fault (Mat * a DVD - RAM UJ - 844 S USB Device drivers or compatibility with Windows 7) or the material, and how can this be resolved?

  Hi Dmitry_3,

  Have you already checked if the CD/DVD drive is properly recognized in Device Manager or it appears with a yellow exclamation point?

  In this case, it might help remove upper and lower filters:
  + 1) run Regedit (start-> Run-> Regedit).
  + 2) navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class {4D36E965-E325-11CE-BFC1-08002BE10318} +.
  + 3) in the right pane, delete the "UpperFilters" key and delete the key "LowerFilters". +
  + 4) reboot. +

• Satellite P300-22 how many DVD should I prepaire 4 creating recovery DVDs

  I'm french too, so don't be afraid of my mistakes 'no more! '

  I have a Toshiba Satellite P 300, and I want to create a recovery DVD.
  How many DVDs to 4.7 GB / by, if I prepaire for this creation?

  Thank you
  in fact, I have a Toshiba P300-22F,
  There is a hard drive failure, because I changed the C: partition size
  I have to restore the player to factory default state using the recovery DVD,
  but I don't create this DVD.

  One of my friends has a model Toshiba P300 - 1 5.
  so I try to create this DVD form his computer...

  Hello

  At first I want to give you advice on DVD, you must use. For a successful recovery creation DVD use DVD-R virgins. I created several media recovery on the models of different laptops, with DVD-R media always worked.

  On the market there are several portable Satellite and Satellite Pro P300 and image is not the same for each of them.
  Just for info:
  -Satellite P300-1GL I needed a blank media only, but
  -for Satellite Pro P300-149 I needed two of them

  So I think that you need one. When you start 'Toshiba Recovery Disc Creator' and choose the media you want to use it, you will be informed how many of them do you need.

  Good bye

• Satellite P300-17R I need to know how create recovery DVDs

  When I bought the laptop, there was an option to make a DVD with all the info.
  Cases where things are lost now when I try to find how to do another.
  It does not seem possible.

  There's something missing as hard drive or more?
  Where on my laptop find recovery dvd option and how to make a download for the HDD option?

  I have a P300-17R
  It's really urgent, you can also send info directly to me
  [email protected]

  Hello

  You can create a recovery disk using the recovery disk creator Toshiba!
  This tool would use files and the image that is stored on the HARD drive and create the recovery DVDs.

  You've found this Toshiba Recovery disk Creator on your laptop?

  PS: Have you read the user manual?
  There are some interesting info about the recovery disk and how to handle!

• Satellite Pro C660-111 - error creating recovery DVDs

  Hello

  I am trying to create recovery discs to aid Recovery Media Center to Toshiba for my new Satellite Pro C660-111. However, I have tried three times now and it gets about one-third through the first of two discs and comes up with the following error:

  Missing E:\Boot\bcd
  (Error 020123-F1-00000000 code)

  Help please! What I am doing wrong?

  Thank you very much
  Franki

  Hello

  What kind of blank DVDs that you use to create the Toshiba Recovery disk?

  Maybe the error is related to the disk, I used DVD - R Verbatim media and had no problem to create diskettes.

• Creating a DVD from HP restore Partition of hard disk

  OK, let's go.  We have three computers in this House.   One is an HP 2004 775th with XP that was suggested be sent to pasture.   I agree to this.  My other computer is a HP Pavilion p6750f with Win 7 Home 2011.  Large computer and has no problem.  I want to keep this PC by business unit and buy a refurbished on ebay as a HP Compaq 8000 with Win 7 Pro 64 bit.  This should be Uncategorized at 10 for Microsoft Windows gives the OK.

  The majority of these 8000 HP on ebay have the disk hard 'original' wiped and reinstalled with new Windows 7 Pro 64-bit software.   Some say that the hard drive has the "restore disk partition hard rule."

  Now the big question.   With original Windows 7 Pro 64-bit clean wiped from the HD and a new install of Win. 7, I'll be able to make a DVD-restore/recovery Partition on the hard drive?

  That question seems to be is "I'll be able to make my own recovery DVDs?"  As shown in This DOCUMENT?  The answer is probably not.  Unless the previous owner includes the recovery of the purchase value.  These units are most likely end the lease to a company, which means that they are erased clean from any software that may have been installed.  The inclusion of an operating system is to facilitate the resale.

• Satellite U400-183 - need Recovery DVD and AHCI drivers

  Hello

  I tried to reinstall Win Vista Home Premium to my Satellite U400-183. I used a DVD OS Win that came with my other laptop to other manufacturing and the key that came with my Toshiba laptop. Everything works beautifully, but in some areas of Windows is still some specific parameters of the manufacturing on the other. Now is it possible to get a DVD of Windows Vista Toshiba?

  Another question is where can I get the AHCI drivers. There is only an exe file on the support site which I can't use during the installation of Windows. There must be some these .sys files, but I can't find them on the Toshiba site, so I had to install Windows in compatibility mode.

  Thanks in advance!

  PS: Sorry for my bad English, I'm from the Germany...

  Hello!

  A new recovery DVDs, you can get your local ASP (authorized service provider).
  Or you order a DVD from Toshiba directly:
  https://backupmedia.Toshiba.EU/landing.aspx

  The AHCI drivers or let say Intel Storage Manager, you can download from the Toshiba site as you have already said.
  The .exe file, you must check out to use during the installation, but with the recovery disk you n t need them.
  Please read the readme file in the Storage Manager, there is an example how to extract it. Use the command line what it
  For example: - a - a - PC:------.

  Good bye

• make a simple bootstrap system and delete the partition

  I had a window of crash - like (although I don't know the condition) and I went to the computer-fixing shop and tell them to fix my machine... then they finished and when I got home got hard drive partition and I have multi-boot system... I want to delete the partition and format the primary partition has if little volume... can someone help me what I can do because I tried to format it, but all came to the error... Please help me

  Remove accidental installation of a 2nd copy of Win7

  Uninstall Windows 7 on a multiboot system (applies to remove 2nd install Windows 7 as well)
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-Windows-7-on-a-multiboot-system

  To remove the Windows 7 multiboot screen

  Even if you delete or format the partition containing Windows 7, it can still appear as an operating system option when you start your computer. You can remove Windows 7 from the multiboot screen.

  1. open System Configuration by clicking on the button start the picture of the Start button, clicking Control Panel, clicking system and security, clicking Administrative Tools, and then double-click the System Configuration. ? Need administrator permission if you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  2. click on the Startup tab and then click on the list? Windows 7.? (That you removed)

  3. click on remove, set the time of '0', click on 'Apply' and 'OK' and then click on restart.

  Start-up of the first copy of Windows 7 (normally the the second entry in the start menu).

  Install EasyBCD:
  http://NeoSmart.NET/DL.php?id=1

  Make sure you use indeed the 1st copy that you have installed. Open "Disk management", the partition that you started now will be marked as Boot, Page File, Crash Dump, primary Partition of Windows 7). The other (second copy) will be marked only as "Primary Partition".

  Now using disk management to format the partition where the second copy is installed.

  Run EasyBCD and remove the entry for the second copy.

  J W Stuart: http://www.pagestart.com

• Portege M500 - how to create recovery DVDs?

  Hi there :)

  I bought Toshiba Portege M500. Anyone know how to create a CD/DVD of recovery on this model?

  I installed the "recovery CD creator" but - I just can't create it. The only thing that came on the screen is: Qosmio Player recovery CD.

  On the help page - there are instructions to create the disk - but the options were not available to me. (i.e. the system recovery disc option)

  Help, please! I would really appreciate it!

  Sophie

  Hello

  Portege M500 was equipped with HARD drive recovery option?
  Did you find the information you need to create a recovery disk in the user's manual?

  Where did you find the "Toshiba recovery CD creator"?
  This tool has been pre-installed?

  I guess that there is no image on the HARD drive files that are needed to create the recovery disk Toshiba and so you can't create it.

• I want to create recovery DVDs for my g6-1228so pavilion

  When I try to use HP Recovery Manager it asks 4 x DVD... When I try to use DVD + R or DVD + RW type he denied these type of DVD... Strange, so what type of DVD do I use?

  Hello

  You're welcome and Merry Christmas to you too

  All the best,

  DP - K

• Access the recovery disk and deleting files

  I am running Vista Home Premium SP2 on a HP G50 laptop.  Recently, I ran a backup of my system and wanted to place on an external drive which was under XP.  The system wouldn't let me, so I put it on the recovery partition drive.  This filled the disk and slowed my computer down a lot.  I want to remove the backup files but can not access the recovery disc.  How to access this disk to remove the backup files?  In addition, remove the recovery files?  I made the recovery disc.

  Hello

  Here is the information from HP for your problem with the partititon of recovery

  (D) drive is red in Vista

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01555992&cc=us&LC=en&DLC=en

  for any additional questions about this contact HP