Creating report perpetually reserved outputs only one entry

Similar Questions

• Font list has only one entry

  Using Windows XP / RH8 / RSC 1.3

  On a project I just noticed the police in the drop-down list has only one entry (Times New Roman), which is not the police, that the project uses.  The project is always displayed in the Arial font and this issue not currently causing me a problem, but I thought I had better solve now.  Other projects do not have this problem.

  You can provide any assistance is greatly appreciated.

  Kind regards

  Joe

  Post edited by: tojo45

  You can try to remove the PDC, copy the good .apj then opening the project (still preventing RSC from getting the most recent server).

  If it works, then you can check the RSC apj, paste the right thing in and come back in.  (paste then opening HR does not trigger the functions of source control so you have to do it manually.)

• Create the user with privileges only data entry.

  Hello guys,.

  A very basic question. I created the request of APEX, well obviously the user with whom I created this application has developer access, now I want to create a user who is able to see the developed application, I tried to find the user options, but could not.  Someone can help me to find the option, I need to follow, so that the newly created user is only able to enter data into forms and run reports and should not be able to make changes in the application developed.

  Concerning

  Faisal Niazi says:

  A very basic question. I created the request of APEX, well obviously the user with whom I created this application has developer access, now I want to create a user who is able to see the developed application, I tried to find the user options, but could not.  Someone can help me to find the option, I need to follow, so that the newly created user is only able to enter data into forms and run reports and should not be able to make changes in the application developed.

  Create 'end users' by selecting No for the user is an administrator of the workspace and the user is a developer account privilege options create new user accounts. These users connect to the APEX Application Builder. It can be given direct access to a request by specifying the ID of the application or alias to the URL:

  apex.oracle.com/pls/apex/f?p=

  or

  apex.oracle.com/pls/apex/f?p=

  Using an alias for the application is recommended.

  To restrict user access to pages, components and specific applications, create authorisation schemes and the apply to the application level.

• (RH9) 'See also' - how to make * not * clicks when only one entry in the list?

  I have several topics (A, B and C) in which I want to place a control 'See also' that has two subjects (B and C) inside.

  In the A section, click on the control see also appears a list of "A" and "B". Click each item in the list to access the topic.

  In the B section, click on the control see also jumps directly to heading C.

  In the C section, click on the control see also go directly to section B.

  Is there a way to force the control to * always * bring up a list of subjects "see also"? For example, in section B, I would like to control to display a list containing just heading C.

  Hoping that...

  Thank you.

  Hello

  Administer a test.

  Click your related topics in WYSIWYG button and switch to HTML view.

  You should see a quantity of larg of the code presented in green, followed by a small amount of what looks like the code repeated in dark red.

  Copy the following line (including the < and="" the=""> and add the following line to each area.)

  Give it a go and see how you rate.

  See you soon... Rick

  Useful and practical links Wish to RoboHelp form/Bug report form Begin to learn RoboHelp HTML 7, 8 or 9 in the day! Adobe Certified RoboHelp HTML Training SorcerStone blog RoboHelp EBooks

• Is there a way to create multiple BQY output to one of the Job file?

  Hello

  I use the EPM11.1.2.3.501 version.

  BQY report because of the large amount of data, it is difficult to use WebClient.

  Then share on a quarterly basis.

  However,.

  If change is to occur, there are difficulties must edit each file.

  For example,.

  Save the task BQY for 4th quarter 2014, 2014 3 q, 2nd quarter of 2014, 2014-1 q.

  When you run the task, the output of the work file is created.

  If the work file is changed, you must change all four files.

  This will not be growing creations.

  Is there a way to create multiple BQY output to one of the Job file?

  Please help me.

  Thank you

  It is not possible to have several BQY out in a work file.

  Thank you

  KK

• I need to create a table of contents in iPages but I want only one word for the title, not the line of holes. Or, how can I change the contents of the table? Thank you!

  I need to create a table of contents in iPages but I want only one word for the title, not the line of holes. Or, how can I change the contents of the table? Thank you!

  Yes, you can have a one word title, by assigning a paragraph style title to this one word. No, you cannot change the text in a Table of contents, but you can change paragraph style font attributes (line) and add for example, a head of points between the types of OCD paragraph and page numbers. No part of the table of contents will not provide hyperlinks in exported PDF documents.

  When you look up in the menu bar, you can see the word iPages, or simply Pages. There is no product of iPages.

• I am creating a total field contingent in a PDF form created by me which will only add cost in total ONLY if the box is checked.  Another disadvantage to this is one of the fields (number of monitors), I am eager to multiply by the field notes.

  I am creating a total field contingent in a PDF form created by me which will only add cost in total ONLY if the box is checked.  Another disadvantage to this is one of the fields (number of monitors), I am eager to multiply by the field notes, which is a field required number on there.

  All of them are select___

  Here are all the names of FQDN (towards the bottom):

  Check the boxes:

  • selectiPhone
  • selectSwipe
  • selectMonitor
  • selectDesktop
  • selectLaptop
  • selectiPadCell
  • selectiPad
  • selectPhone

  Fields of costs:

  • CostiPhone
  • CostSwipe
  • CostMonitor
  • CostDesktop
  • CostLaptop
  • CostiPadCell
  • CostiPad
  • CostPhone

  The notes field that will calculate this is "NotesComputer Monitor in notes". -It is a body of numbers forced the inability to put anything else in it.

  Then add them all in TOTAL COST

  Sorry for my ignorance: it's my first time doing a form like this.

  Please see below for the screenshot.

  

  Dropbox - conditionalSum.pdf has the answer

• need to get only one line when you use between (date columns)

  Hi all

  create the table SAMPLE_ITEMS

  (ITEM_NO, varchar2 (10))

  Date DELIVERY_DATE,

  Number of QTY_SUM1

  Number of QTY_SUM2

  Number ITEM_QTY,

  Number ORDER_QTY,

  Number ITEM_AMOUNT,

  Number of SALES_AMOUNT

  );

  insert into SAMPLE_ITEMS values ('AAA', ' 28 / 04/2014 ',-88, 0,475,262,-123.45,-1188);

  insert into SAMPLE_ITEMS values ('AAA', ' 28 / 05/2014 ', 0, - 122, 475, 262, - 10.234,-1647);

  insert into SAMPLE_ITEMS values ('AAA', ' 16 / 06/2014. ', 0, 0,475,262,-80.59,-135);

  insert into SAMPLE_ITEMS values ('AAA', 19 December 2014 ', 0, 0,475,262,-42.29,-67.5);

  Setting out with my own query,

  ITEM_NO	TRUNC (DELIVERY_DATE)	QTY_SUM1	QTY_SUM2	ITEM_QTY	ORDER_QTY	ITEM_AMOUNT	SALES_AMOUNT
  AAA	28/04/2014	-88	0	475	262	-123.45	-1188
  AAA	28/05/2014	0	-122	475	262	-10.234	-1647
  AAA	16/06/2014	0	0	475	262	-80.59	-135
  AAA	19/12/2014	0	0	475	262	-42.29	-67.5

  Every time I question as code

  Select * from SAMPLE_ITEMS

  where DELIVERY_DATE between April 28, 2014 ' and 19 December 2014 '-> they must pass as a parameter

  I need to get only one line

  AAA

  -88

  -122

  475

  262

  -256.564

  -3037.5

  Database 11.2.0.1.0

  Note; Please do not use MAX for Date and do not want to display Date columns in the result

  Note 1: I want to choose DELIVERY_DATE in select it also and only get a line like above the expected result

  SELECT item_no

  SUM (qty_sum1),

  SUM (qty_sum2),

  SUM (DISTINCT item_qty),

  SUM (DISTINCT order_qty),

  SUM (item_amount),

  SUM (sales_amount)

  OF SAMPLE_ITEMS

  WHERE the DELIVERY_DATE BETWEEN TO_DATE (28 April 2014 ', "dd/mm/yyyy")

  AND TO_DATE (19 December 2014 ', "dd/mm/yyyy")

  GROUP BY item_no;

  I will get

  ITEM_NO Trunc (DELIVERY_DATE) QTY_SUM1 QTY_SUM2 ITEM_QTY    ORDER_QTY TTEM_AMOUNT SALES_AMOUNT        

  AAA             12/19/2014                         -88                 -122                475                262                       -256.564              -3037.5

  OK fine, I want to choose DELIVERY_DATE as if so I'll have all the lines, but I want to only show one as shown above

  Because I do report discoverer in Oracle Apps, without taking the DELIVERY_DATE of the select query, it is not possible to move the date as a parameter

  Can you please help me how to do this?

  Thank you

  Post edited by: Rajesh123 NOTE added in the body of the Message

  Post edited by: added test Rajesh123 messages

  Maybe you want a single line in all cases

  Select si.item_no,

  start_date min (d.start_date),

  min (d.end_date) end_date,

  min (si.qty_sum1) qty_sum1,

  min (si.qty_sum2) qty_sum2,

  min (si.item_qty) item_qty,

  min (si.order_qty) order_qty,

  Sum (si.item_amount) item_amount,

  Sum (if. Sales_Amount) sales_amount

  of (start_date select to_date(:date_from,'dd-MON-yyyy'))

  to_date(:date_to,'dd-mon-yyyy') end_date

  of the double

  ) d

  left outer join

  TR sample_items

  on the si.delivery_date between d.start_date and d.end_date

  Group of item_no

  ITEM_NO	START_DATE	END_DATE	QTY_SUM1	QTY_SUM2	ITEM_QTY	ORDER_QTY	ITEM_AMOUNT	SALES_AMOUNT
  -	01/01/1900	31/12/2000	-	-	-	-	-	-

  Concerning

  Etbin

• Save only his entry in hearing from a map

  I'm testing a 4 input channels only USB soundcard with Ms drivers. I need to save it using this sound card. In my computer, I have 1 audio integrated realtek and 1 PCI EMU1212 sound card. But I intend only to entry USB sound card rendering because hearing needs of a device entry and exit running with the same clock speed and so used declines the peripheral realtek or the card of EMU1212 output even if the frequency of these devices are set to the same frequency as my USB sound card. I don't have to watch what I recorded. Help, please.

  Your real problem here is that hearing speak to an audio device, unless you have a way to group several together. I think in this case you only have one way to proceed, and this is to use the (free) ASIO4ALL driver, that will do. If you install it, it will find all audio devices that have valid drivers of MS and integrate into a single stream of ASIO, which will see to the hearing (to go for ASIO devices and ASIO4ALL appears there).

  Yes, you need all together for the same thing but rate *, but they will not be absolutely synchronised. You will be able to tell what the situation with each device however, is using the control panel of ASIO4ALL. Lists all audio devices available to you and their status, in terms of whether or not they will work under this agreement.

  * They claim they can mix some tariffs now, as long as they are digitally simply related

  http://www.asio4all.com/

• Cannot select only one column in a double-column PDF

  See the following pdf file example. I can't select a single column. Whenever I have select several lines, I will have two columns. I currently solve this problem by converting the PDF into an image file and load into Acrobat and OCR on it. But this isn't an ideal solution. I wonder if there is a better solution to fix the pdf file so that I can select only one column at a time.

  https://sites.Google.com/site/sharedacrobat/data/double_column.PDF?attredirects=0 & d = 1

  Use Acrobat Pro to tag a PDF file.

  Look at this PDF file:

  http://www.Adobe.com/content/dam/Adobe/en/DevNet/PDF/PDFs/PDF32000_2008.PDF

  to determine what the appropriate marking is, else "smile, be happy" can become remote.

  Look over article 14.

  Alternatives:

  --| Use Acrobat Pro to add tags to the Document. Does Acrobat to make a "best estimate" for marking. OK for a simple PDF content. not ok for other than simple.

  Use a copy of the PDF test to determine if it meets your needs.

  --| If the file creation supports establishing a logical hierarchy of command content (via the built-in tags, titles and styles) and has a proper Tag for output Tagged PDF management then the majority of the work tag can be done from the outset. Creating applications that are 'good things' - FrameMaker, InDesign, Open Office and MS Word.

  There will always be a need to do some post processing with Acrobat Pro.

  If you have InDesign; See:

  http://blogs.Adobe.com/accessibility/2009/07/indesign_accessibility_best_pr.html

  http://www.Adobe.com/accessibility/products/InDesign/

  http://TV.Adobe.com/watch/accessibility-Adobe/preparing-InDesign-files-for-accessibility

  You will notice that the emphasis on tutorials for 'PDF containing the tag' is mainly for 'Accessible PDF'. Accessible PDF is one of the facilities provided by the tag PDF.

  Another is the export of PDF contents in other applications while maintaining the format/layout in the export. A file PDF containing the tag with a well-trained tree not only supports accessibility, it also supports cut/copy - paste & export of content.

  Other tutorials "Accessible PDF" are available on Adobe TV and the Learning Center community user Acrobat.

  http://acrobatusers.com/learning_center

  Be well...

• My site, created using Dreamweaver cs6 shows only partial images. He worked until a few days ago when I updated Java and Firefox.

  My site, created using Dreamweaver cs6 shows only partial images.
  He worked until a few days ago when I updated Java and Firefox.
  The URL is j - f - a.com.au

  The images are not entirely loading or do you have other problems?

  You can attach a screenshot?

  • http://en.Wikipedia.org/wiki/screenshot
  • https://support.Mozilla.org/KB/how-do-i-create-screenshot-my-problem
  • Use a type of compressed as PNG or JPG image to save the screenshot
  • Make sure you do not exceed the maximum size of 1 MB

  I noticed that some images show at the right end of the window and have set width: auto (right: 0px; width: auto) set the width according to the dimensions of the image (i.e. maintain proportions) and others fill the width full page.

  You can try the following steps in case of problems with web pages:

  You can reload webpages and ignore the cache to refresh potentially stale or corrupt.

  • Hold down the SHIFT key and click the Reload button
  • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
  • Press 'Command + shift + R' (Mac)

  Clear the cache and delete cookies only from Web sites that cause problems.

  "Clear the Cache":

  • Firefox/tools > Options > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Firefox/tools > Options > privacy > "Use the custom settings for history" > Cookies: "show the Cookies".

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• I'm a new mac user. I transferred files from my pc to mac successfully. They were in the 'documents '. Today, I opened the mac and there is only one file in "documents" - I had worked on.  Where are the others? Help please.

  I'm a new mac user. Successfully transferred all of the files from my PC to MacBook pro. All of this is to be seen in the documents. Opened now MacBook and only one file to be seen in 'documents. Where can I find the others. Convinced they are there somewhere, help please.

  The Mac is in itself a system multi-user, whether you choose to create a user or a large number.

  All users you already created can be seen in

  System Preferences > users & groups

  The files for each user are kept separated, protected of the subdirectories of the Directory/Users:

  / Users

  your User_short_name folder

  file user_short_name to your spouse

  record your child User_short_name

  record your dog user_short_name

• I tried to uninstall and reinstall Firefox several times. Whenever I try to open Firefox I get an error message saying "Close Firefox","a copy of Firefox is already open. Only one copy of Firefox can be open at a time. »

  I uninstall Firefox, and then reinstall Firefox, try to open Firefox and get an error message in a box indicating popup.

  "Closing of Firefox.

  "A copy of Firefox is already open. Only one copy of Firefox can be open at a time. »

  Create a new profile as a test to see if your profile is the source of the problems.

  See "basic troubleshooting: a new profile:

  • https://support.Mozilla.com/kb/basic+troubleshooting#w_8-make-a-new-profile

  If this new profile works then you can transfer files from the old profile to the new profile, but make sure not to copy corrupted files.

  See:

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• Toshiba Bluetooth stack & motorcycle S805 two profiles - can use only one?

  Toshiba Bluetooth stack on IBM T42/Windows 2000 test. Motorola S805/multimedia headset supports two audio A2DP stereo of high quality and HFP used as a helmet.

  If I create * only * audio sink profile then I can log in and use the headphones (rather good sound!). If I create * only * a headset profile, then they work well for that, too (not very good sound, but convenient and two-way).

  I am able to create two connection profiles by linking it first as an Audio receiver, then the pairing again as a helmet. The two profiles now appear in the Bluetooth settings window. First of all, I confirm that neither the profile is connected. Now when I try to 'connect' to the headset, it "sounds" the helmet. However, when I press the headset button to accept the connection I get the following message:
  "Now, connect, please wait."
  and then
  "Helmets and headphones can not be used simultaneously. Finished using the headphones and then establish a connection.
  Now the headset (audio receiver) is connected instead of the helmet!

  Note that before I tried to connect to the headset there was no link at all (message is wrong). Also note that if there is only one connection profile (headset) then the headset will connect correctly.

  I want to be able to move quickly from a helmet (good sound quality for music) and headset (for Skype). Deletion and recreation of the connections are too slow, if Skype sounds while I'm listening to music. (the S805 will automatically switch mode headphones while listening to the music, if the call is from a third device such as a cell phone).

  Anyone know if the software can be configured to allow me to do this fast switching between profiles on the same device?

  Thank you and best regards,

  Jeff in Aloha, OR, USA.

  You must use the hands-free profile if it is supported also by your device for VoIP instead of the headset profile!

• There is only one drive when you use the recovery on the Satellite L series disk

  Hi, I just reformat and reinstall windows using the toshiba recovery disk, before this fitness, I had 2 drives, drive C and drive D, theres now only one C drive.
  Also when I press the SHIFT key and simultaneously press the key with 2, trying to type "to the rhythm of the sigm" that is used for e-mail messages that she address types "" "(ouvrir invertated signe de coma)."
  can someone please

  see you soon

  Hello

  OK the first issue should not be a problem. If the recovery does not create a partition which is normal and ok. If you want your second partition to a partition Manager (just google for "partition manager") at the time and re-partition your hard drive. That's all.

  Regarding your "" "problem: could you explain again what you want?" I mean when I type 'Shift + 2', then I get ", whereas the problem?"

  Welcome them