Creating symbols double-problem with binding

Similar Questions

• problem with bind variables in the SQL query view object

  Hi all

  I use JDev 11.1.2.4.0.

  I have a problem with bind variables in the SQL query view object.

  This is my original SQL

  SELECT sum(t.TIME) , t.legertype_id
  FROM LEDGER t
  WHERE t.nctuser_id = '20022' 
        AND to_char(t.insertdate,'YYYYMMDD') in ('20130930','20130929')
  group by t.legertype_id
  

  In my view .xml object query tab, I am writing this

  SELECT sum(t.TIME) , t.legertype_id
  FROM LEDGER t
  WHERE   t.nctuser_id = '20022'
      AND to_char(t.insertdate,'YYYYMMDD') in :dddd
  group by t.legertype_id
  

  Davis here is a variable of Type liaison: String, updatable and necessary.

  I try to deal with Davis as ('20130930 ', ' 20130929') hoping the view object, run as my original SQL.

  But failed. The view object retrieves 0 line after that I run.

  Why?

  Thank you! ('2original SQL0130930', '20130929') ('20130930 ', ' 20130929')

  A variable binding cannot be used as this is why you must use years table. Check decompilation binary ADF: using oracle.jbo.domain.Array with ViewCriteria to see a solution.

  Timo

• Problems with Bind Variables

  SELECT co.ref_num, co.forename, co.surname, co.dob, a.address, a.postcode,
         co.ni_num
    FROM address a, contact co
   WHERE co.ref_num = a.ref_num
     AND (:1 IS NULL OR co.forename = :2)
     AND (:3 IS NULL OR co.surname = :4)
     AND (:5 IS NULL OR a.postcode = :6)
     AND (:7 IS NULL OR a.address = :8)
     AND (:9 IS NULL OR co.dob = :10)
     AND (:11 IS NULL OR co.ni_num = :12)

  With a jdbc connection, we use a web front end for a new management system. The SQL above runs since a search screen. We meet a few serious problems with bind variable and execution plans. When the above query is sent by the database 'AND' clauses could evaluate as follows:
  

  AND ('Tim' IS NULL OR co.forename = 'Tim')
     AND ('Clarke' IS NULL OR co.surname = 'Clarke')
     AND ('' IS NULL OR a.postcode = '')
     AND ('' IS NULL OR a.address = '')
     AND ('25051981' IS NULL OR co.dob = '25051981')
     AND ('' IS NULL OR co.ni_num = '')

  We cannot dynamically assign 'AND' conditions so they are sent through to the database. This translates FTS 99% of the time as the execution plan never prescribed any of the available indices.
  
  Someone has suggestions on how to better 'control' bind variables?

  Hello

  Don't you think that 'OR' Conditions are necessary to check for Null, where the binding variable is NULL or not.

  I think that rather than running the query from the front to FB, try to convey the values of some MS and run this query in the procedure, the extraction from the point of view Design coding application. Never fire the query of the frontal part.

  To come to the problem.

  SELECT co.ref_num, co.forename, co.surname, co.dob, a.address, a.postcode,
  Co.ni_num
  ADDRESS, contact co
  WHERE co.ref_num = a.ref_num
  AND (: 1 co.forename IS NULL or =: 2)
  AND (: 3 co.surname IS NULL or =: 4)
  AND (: 5 a.postcode IS NULL or =: 6)
  AND (: 7 a.address IS NULL or =: 8)
  AND (: 9 co.dob IS NULL or =: 10)
  AND (: 11 co.ni_num IS NULL or =: 12)

  Use the procedure.

  Fact exits of the indexes on the tables and stats are updated...?
  Try to predict explain it. ??

  -Pavan Kumar N

• Problem with Binder

  There is something wrong with my hyperlink social media, when I publish my Web site that that work not, but they do not work in preview mode.

  It only my twitter I seem to have problems with. I'm very new with Muse and could really do with some help.

  Hi, you can publish the site to a temporary site of the BC for us to have a look on.

  Or if it's the Twitter feed widget displays do not, then you might want to check this.

  http://forums.Adobe.com/message/4725856#4725856

  Thank you

  Vinayak

• Problem with bind variable and as operator usage

  Hi all

  I use JDeveloper Version - 11.1.2.4.39.64.36.1 .

  
  

  While implementing the search functionality in the hierarchical Viewer, I created a link in the underlying t variable, created to find, due east of the request-

  
  

  SELECT XxamAnkitObjects.ID,

  XxamAnkitObjects.OBJECT_NAME,

  XxamAnkitObjects.OBJECT_TYPE,

  XxamAnkitObjects.PARENT,

  XxamAnkitObjects.PARENT_ID,

  XxamAnkitObjects.PARENT_TYPE

  OF XXAM_ANKIT_OBJECTS XxamAnkitObjects

  WHERE object_name like ' %: o_name ".

  What I'm trying to accomplish here, it is that the input provided by the user in the search box must match with the object_name in the table.

  During execution, I met the following error (from newspapers WLS)-

  < QueryCollection > < buildResultSet > [598] java.sql.SQLException: try to set a parameter name that does not intervene in the SQL: o_name

  at oracle.jdbc.driver.OraclePreparedStatement.setNullAtName(OraclePreparedStatement.java:5384)

  at oracle.jdbc.driver.OraclePreparedStatementWrapper.setNullAtName(OraclePreparedStatementWrapper.java:1451)

  The following query has been generated during the operation of a research-

  < ViewObjectImpl > < buildQuery > [593] SELECT XxamAnkitObjects.ID, XxamAnkitObjects.OBJECT_NAME, XxamAnkitObjects.OBJECT_TYPE, XxamAnkitObjects.PARENT, XxamAnkitObjects.PARENT_ID, XxamAnkitObjects.PARENT_TYPE XXAM_ANKIT_OBJECTS XxamAnkitObjects WHERE object_name like ' %: o_name ".

  < ViewObjectImpl > < bindParametersForCollection > [594] params for ViewObject Bind: [model.vo.ObjectNameSearch] AppModule.ObjectNameSearch1

  Advice kindly the way ahead.

  Best regards

  Ankit Gupta

  The problem is that you used quotes around the variable binding. Try

  SELECT XxamAnkitObjects.ID,
         XxamAnkitObjects.OBJECT_NAME,
         XxamAnkitObjects.OBJECT_TYPE,
         XxamAnkitObjects.PARENT,
         XxamAnkitObjects.PARENT_ID,
         XxamAnkitObjects.PARENT_TYPE
  FROM XXAM_ANKIT_OBJECTS XxamAnkitObjects
  WHERE object_name like '%' || :o_name || '%'
  

  A note: this type of query will do a full table scan, as the searches with wildcards to the left cannot use a regular index. If you have multiple lines, this will impact on the research persormance hughe!

  Timo

• Problem with Bind variable cannot be changed.

  Hi all
  I use Jdev 11.1.2.3.0. In my VO, I created a Bind Variable and set it NOT UPDATABLE. Then, I created a display with some other Variables Bind criterion.
  I use this criterion to display on a search page, but when running, I see also an inpunt for the defined variable NOT UPDATABLE text and I can't change its value.
  Of course, if I try to change the value, and I do research, I get an error.
  
  It is the source of the VO:
  
  < variable
  Name = "UlssVar".
  Type = "where".
  Type = "Java.lang.String"
  IsUpdateable = "false" >
  < TransientExpression > <! [CDATA [adf.context.current.sessionScope.get ('ulss')]] > < / TransientExpression >
  < / variable >
  
  Is this a bug of the ADF?
  I thank in advance.

  Hello

  try selecting the variable binding and open the property inspector, under the guidance of the user interface, set the flag of 'view' to hide. This should hide it (no bug for this reason)

  Frank

• Problems with binding on scrollPosition atribute

  Hello

  I'm having some trouble to implement the binding between a painting and a list.

  When I scroll vertically through the Web, the list scrolls, but the elements make as it should.

  The canvas are the same size from the list.

  I created a quick example to show what the problem is.

  <?xml version="1.0" encoding="utf-8"?>
  <mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" 
       layout="absolute"
       backgroundColor="0xFFFFFF"
       creationComplete="addRandomItems()">
       
       <mx:Script>
            <![CDATA[
                 import mx.collections.ArrayCollection;
                 import mx.utils.ObjectUtil;
                 
                 private function addRandomItems():void {
                      var provider:ArrayCollection = new ArrayCollection();
                      
                      for (var i:int = 0; i < 100; i++){
                           var o:Object = new Object();
                           var children:Array = [];
                           var incYear:int = 0;
                           
                           incYear += i % 2 == 0 ? 1 : 0; 
                           
                           o.description = "Teste " + i ;
                           
                           for (var j:int = 0; j < 3; j++){
                                var xyz:Object = new Object();
                                
                                do {
                                     xyz.startDate = new Date(2008 + incYear , Math.random()*10, Math.random()*31);
                                     xyz.endDate = new Date(2008 + incYear, Math.random()*11, Math.random()*31);
                                     xyz.color = Math.random() * 0xFFFFFF;
                                     
                                     if (xyz.startDate.date == 31 && xyz.startDate.month == 11){
                                          xyz.startDate.date++;
                                     }
                                     
                                     if (xyz.endDate.date == 31 && xyz.endDate.month == 11){
                                          xyz.endDate.date++;
                                     }
                                } while (ObjectUtil.dateCompare(xyz.startDate, xyz.endDate) != -1 );
                                
                                children.push(xyz);                              
                           }
                           
                           o.children = children;
                           provider.addItem(o);
                      }
                      descriptionList.dataProvider = provider;
                 }
            ]]>
       </mx:Script>
       
       <mx:List id="descriptionList"
            x="10" 
            y="10" 
            height="738"
            width="300"
            rowHeight="25"
            labelField="description" 
            horizontalScrollPolicy="off" 
            verticalScrollPolicy="off" 
            verticalScrollPosition="{viewer.verticalScrollPosition}"/>
       
       <mx:Canvas id="viewer" x="318" y="10" width="840" height="738">
            <mx:Canvas height="2500" width="2500" />
       </mx:Canvas>
       
       
  </mx:Application>
  

  Kind regards

  Fredy.

  Hi, Freddy

  Here is the solution:

  On the Web, create the updateComplete (event) method.

  private void updateComplete(evt:ScrollEvent):void {}

  If (evt.direction == ScrollBarDirection.VERTICAL) {}
  var p: Number;
  % = (100 * viewer.verticalScrollPosition) / viewer.maxVerticalScrollPosition;
  descriptionList.verticalScrollPosition = (descriptionList.maxVerticalScrollPosition * %) / 100;
  descriptionList.dataProvider.refresh ();

  }
  }

  When you scroll the canvas, the list scrolls.

  The problem is because the viewer.verticalScrollPosition is greater than the list.

  You must make a percentage.

  Thank you!

• Problem with binding components of fragments of page in bean managed when rendered as region

  I detected a problem when I bind a component in a managed bean for a page fragment which is a view of a TaskFlow exposed to JSF as a region.

  
  

  This problem happened when I exhibited same TaskFlow as region of two or more instances in the same Joint Strike Fighter. The component that is only returned in the latter region.

  
  

  JDeveloper 12 c (12.1.2.0) ADF12c.

  This is the code:

  The page fragment:

  <?xml version='1.0' encoding='UTF-8'?>
  <ui:composition xmlns:ui="http://java.sun.com/jsf/facelets" xmlns:af="http://xmlns.oracle.com/adf/faces/rich">
    <af:panelGroupLayout id="pgl1">
      <af:inputText label="Label 1" id="it1" binding="#{bindingComponentBean.inputText}"/>
      <af:button text="button 1" id="b1"/>
    </af:panelGroupLayout>
  </ui:composition>
  

  Bean managed (within the scope of the request)

  package com.edisa.test.errors.view.backing;
  
  
  import oracle.adf.view.rich.component.rich.input.RichInputText;
  
  
  public class BindingComponentBean {
      private RichInputText inputText;
  
  
      public BindingComponentBean() {
      }
  
  
      public void setInputText(RichInputText inputText) {
          this.inputText = inputText;
      }
  
  
      public RichInputText getInputText() {
          return inputText;
      }
  }
  

  TaskFlow

  <?xml version="1.0" encoding="UTF-8" ?>
  <adfc-config xmlns="http://xmlns.oracle.com/adf/controller" version="1.2">
    <task-flow-definition id="TestTaskFlow">
      <default-activity>test_fragment</default-activity>
      <managed-bean id="__1">
        <managed-bean-name>bindingComponentBean</managed-bean-name>
        <managed-bean-class>com.edisa.test.errors.view.backing.BindingComponentBean</managed-bean-class>
        <managed-bean-scope>request</managed-bean-scope>
      </managed-bean>
      <view id="test_fragment">
        <page>/fragments/test_fragment.jsff</page>
      </view>
      <use-page-fragments/>
    </task-flow-definition>
  </adfc-config>
  

  JSF page

  <?xml version='1.0' encoding='UTF-8'?>
  <!DOCTYPE html>
  <f:view xmlns:f="http://java.sun.com/jsf/core" xmlns:af="http://xmlns.oracle.com/adf/faces/rich">
      <af:document title="index.jsf" id="d1">
          <af:form id="f1">
              <af:pageTemplate viewId="/oracle/templates/threeColumnTemplate.jspx" id="pt1">
                  <f:facet name="center">
                      <af:panelGridLayout id="pgl1" inlineStyle="border: 1px solid #eee;">
                          <af:gridRow marginTop="5px" height="auto" marginBottom="5px" id="gr1">
                              <af:gridCell marginStart="5px" width="50%" id="gc1" inlineStyle="border: 1px solid #eee;"
                                           halign="stretch">
                                  <af:panelBox text="Region 1" id="pb1">
                                      <f:facet name="toolbar"/>
                                      <af:region value="#{bindings.TestTaskFlow2.regionModel}" id="r2"/>
                                  </af:panelBox>
                              </af:gridCell>
                              <af:gridCell marginStart="5px" width="50%" marginEnd="5px" id="gc2"
                                           inlineStyle="border: 1px solid #eee;" halign="stretch">
                                  <af:panelBox text="Region 2" id="pb2">
                                      <f:facet name="toolbar"/>
                                      <af:region value="#{bindings.TestTaskFlow1.regionModel}" id="r1"/>
                                  </af:panelBox>
                              </af:gridCell>
                          </af:gridRow>
                      </af:panelGridLayout>
                  </f:facet>
                  <f:facet name="header"/>
                  <f:facet name="end"/>
                  <f:facet name="start"/>
                  <f:facet name="branding"/>
                  <f:facet name="copyright"/>
                  <f:facet name="status"/>
              </af:pageTemplate>
          </af:form>
      </af:document>
  </f:view>
  

  Component to bind to the support extended to bean bean would be.

  In fact, it is solely to support the scope of the bean - to distinguish two or more instances of the page fragment component.

  It has the same duration of life as the requestScope, but for different instances of the components parts / declarative, you have separate instances of scope backingBean controlled beans.

  http://adfpractice-Fedor.blogspot.com/2012/03/managed-bean-scopes-for-page-fragments.html

• EID Studio 3.1 double problem with data type in view

  I had a view work EID Studio 3.0 and it imported to the 3.1. The first thing I did was add the FROM clause, but I get validation errors. Questions (so far) seem to be defined as a mdex:double in my metadata fields. My definition of metadata for RESOURCE_QUANTITY is as follows:

  RESOURCE_QUANTITY, quantity,mdex:double, COMP, default

  The first question I have is in my WHERE clause:

  RESOURCE_QUANTITY <>0.0 OR RESOURCE_AMOUNT <>0.0

  gives the following error: a WHERE clause: can't compare mdex:double - set and mdex:double

  I have remove the WHERE clause for the moment and try to validate and get this matter in my SELECT clause:

  SELECT SUM (RESOURCE_QUANTITY) AS QuantitySum

  gives the following error: in the computer attribute 'QuantitySum': 'SUM' is not a valid library on types (mdex:double - set) function

  What is mdex:double - value and how this field get defined in this way?

  Hi Lily,

  I think we'll see a lot of variations on this issue in the next two weeks.  The attributes handling multiple assign has been totally redesigned OEID 3.1.  So, if you have an attribute that is listed as that can have multiple values, it is declared as a set of values (couble-set) rather than a single value (double)

  For example, if RESOURCE_QUANTITY is really unique-assign (and it is declared as multi - attribute by mistake), you can just reload the data via a base line to solve the problem.  If it is in fact several entitlement, you must tell the engine in your application, how to treat the different missions that may be present for each record.

  Hope that helps, I know a lot of people are going to get pop up by the present.

  Patrick Rafferty

  http://branchbird.com

• Problem with bind in Execute Immediate

  Hi all
  
  Scenario 1:
  It works very well.

  DECLARE
    V VARCHAR2(20) := ':X';
    X VARCHAR2(20) := 'Hello World';
    RES VARCHAR2(20);
    QRY VARCHAR2(100);
  BEGIN
    QRY := 'SELECT '||V||' FROM DUAL';
    EXECUTE IMMEDIATE QRY INTO RES USING X;
    DBMS_OUTPUT.PUT_LINE(RES);
  END;

  Scenario 2:

  DECLARE
    V VARCHAR2(20) := 'X';
    X VARCHAR2(20) := 'Hello World';
    RES VARCHAR2(20);
    QRY VARCHAR2(100);
  BEGIN
    QRY := 'SELECT '||V||' FROM DUAL';
    EXECUTE IMMEDIATE QRY INTO RES USING X;
    DBMS_OUTPUT.PUT_LINE(RES);
  END;
  
  Error:
  X invalid identifier. 

  Necessary 'X' as the output.
  
  I could do to make it works very well for both scenarios with small changes in the code?

  My code can't handle scenario 2.

  You can change to sth as follows:

  SQL> declare
    v     varchar2 (20) := 'X';
    x     varchar2 (20) := 'Hello World';
    res   varchar2 (20);
    qry   varchar2 (100);
  begin
    qry := 'SELECT ' || case when v not like ':%' then ':' end || v || ' FROM DUAL';
  
    execute immediate qry into res using case when v not like ':%' then v else x end;
  
    dbms_output.put_line (res);
  end;
  /
  X
  PL/SQL procedure successfully completed.
  
  SQL> declare
    v     varchar2 (20) := ':X';
    x     varchar2 (20) := 'Hello World';
    res   varchar2 (20);
    qry   varchar2 (100);
  begin
    qry := 'SELECT ' || case when v not like ':%' then ':' end || v || ' FROM DUAL';
  
    execute immediate qry into res using case when v not like ':%' then v else x end;
  
    dbms_output.put_line (res);
  end;
  /
  Hello World
  PL/SQL procedure successfully completed.
  

• How to create a dynamic form with bind variable: figure &amp;: table_name

  My application has two LOV, one to select a schema and the other to select a table in this schema. Then I have a button that goes to a report that displays data in this table.schema.
  
  Now, I want to create a link to a form where I can edit the record based on the identifier of this table.schema, but it does not appear that I can create a dynamic form where I pass the schema.table_name and the rowid. Is this possible? Can someone tell how can I do this? The form builder only wants a fixed schema/table name.
  
  Thanks in advance.
  
  Stuart.

  Hi Stuart,

  If you create your section in the section #BOXBODY # it will already have to be encapsulated in a form.

  He will submit to the correct location.

  If you call your field of multi line field names, they will be stored in them.

  form field f01 is mapped to wwv_flow.g_f01

  Concerning

  Michael

• problem with binding breadsticks

  I have a page contains two jsff, dragged and dropped as a region.
  I want to get the link of the other jsff container while I'm in the first jsff.
  The jsff contains form and some components of text input and checkbox component.
  
  This I have done it before, but in this case the other jsff was an array element.
  I wrote this code to get the link container:
  
  RicheTableau deptable = (RichTable) ADFUtil.findComponentInRoot ("deptTable");
  Model CollectionModel = (CollectionModel) deptable.getValue ();
  JUCtrlHierBinding employeesTableBinding = (JUCtrlHierBinding) model.getWrappedData ();
  DCBindingContainer dcbindings = employeesTableBinding.getBindingContainer ();
  OperationBinding operationBinding = dcbindings.getOperationBinding("ExecuteWithParams");
  
  How to get the link container when I do not have a component of the table, but a layout of the form that contains some entries texts and boxes.

  http://download.Oracle.com/otn_hosted_doc/JDeveloper/11gdemos/ADF-region-interaction/ADF-region-interaction.html
  http://download.Oracle.com/otn_hosted_doc/JDeveloper/11gdemos/AdfInsiderContextualEvents/AdfInsiderContextualEvents.html

• Problem with access: local only for wireless in Vista

  A few weeks ago, we got a new router at home. It works fine, but a few days ago, my computer suddenly could no longer access the internet wireless on this subject. (He had been able to before). Other computers in the House can use it for the wireless, and my computer can get on the internet by cable. My computer can also access wireless to other places, but not at home, and more.

  So far, I tried everything what I found on the internet to solve the problem without success. I tried:

  1. the solution proposed on this page http://support.microsoft.com/kb/928233.

  2. make sure that windows is completely updated.

  3 disable IPv6 and IPv4 (although not at the same time).

  4 turn off the power management feature that allows the computer to turn off the wireless card.

  5. disabling and re-enabling the network card.

  so far, nothing has worked. Can someone, please?

  Hello

  In most cases, this problem is created by the problem with wireless security.

  Try to connect with the security temporarily turned off.

  Or firewall blocking local traffic.

  Wi - Fi in general.

  These steps and tell us where is the breaking point.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Make sure that if there is Wireless Utility a utility vendor is not running with the native Windows wireless utility.

  ----------------

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible set up the firewall correctly, otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.

  If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  ---------------------------

  Stack TCP/IP work should look like.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.

  The physical address is MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.

  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  ---------------------------------------------------

  A message in the small window that says connected wireless doesn't means that you are really a valid functional connection.

  Above everything is OK, you must be able to connect to the router.

  Connection to the router means that you can enter the IP of the router base in an address bar in one go, being able to connect and configure the router menus see.

  If it doesn't connect to the router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.

  Enable security wireless after you eat to make a functional connection.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• problems with mysql OWB mapping: double, enum, TEXT fields

  Hi all
  
  I'm trying to get my mysql source environment data in the oracle environment, but I have problems with a couple of types of data source: (double, enum, text).
  
  After we used the mapping script:
  I used david original platform allans definition script (thanks david)
  
  In the target mysql source mapping
  TEXT is mapped as varchar (max)
  double as double
  ENUM as CHAR (0)? and like TANK (2000) in the temporary_table
  
  the deployment will correctly, but when running, there are problems with the mapping package generated on the target...
  
  "Job 69 error: ERROR (461, 42): PLS-00103: encountered the symbol") "when expecting one of the following values:"
  
  (
  
  (462: 42) ERROR: PLS-00103: encountered the symbol ")" when expecting one of the following values:
  
  (
  
  (473, 38) ERROR: PLS-00103: encountered the symbol "INDEX" when expecting one of the following values:
  
  "
  
  When you look in the package, you see that it is linked to
  
  ' TYPE ' T_C$ _26_DE "IS THE TABLE OF VARCHAR (MAX) INDEX DIRECTORY;
  TYPE "T_C$ _28_WI ' IS THE DOUBLE INDEX DIRECTORY TABLE.
  
  
  a double does not exist such an and should probably be mapped to 'DOUBLE PRÉCISION' in oracle.
  
  the enumeration on the target is mapped in a char (1)...
  
  I adapted the scripts of platform like this:
  
  "OMBALTER PLATFORM"MySQL"DELETE PLATFORM_TYPE"double ";
  Platform OMBALTER "MYSQL" ADD PLATFORM_TYPE "double".
  Platform OMBALTER 'MYSQL' EDIT PLATFORM_TYPE 'double' SET PROPERTIES (SYNTAX) VALUES ('double')
  Platform OMBALTER 'MYSQL' ADD FROM_PLATFORM_TYPEMAP 'DOUBLE_TOG' SET PROPERTIES (FROM_DATATYPE, TO_DATATYPE) VALUES ('double', 'DOUBLE PRÉCISION')
  Platform OMBALTER 'MYSQL' ADD TO_PLATFORM_TYPEMAP 'DOUBLE_FROMG' SET PROPERTIES (FROM_DATATYPE, TO_DATATYPE) VALUES ('DOUBLE PRECISION', 'double')
  
  
  Platform OMBALTER 'MySQL' 'Double precision', DELETE PLATFORM_TYPE;
  Platform OMBALTER 'MYSQL', 'Double précision' ADD PLATFORM_TYPE
  Platform OMBALTER 'MYSQL' PLATFORM_TYPE EDIT 'double precision' SET PROPERTIES (SYNTAX) VALUES ('double precision')
  Platform OMBALTER "MYSQL" ADD FROM_PLATFORM_TYPEMAP "DOUBLE PRECISION_TOG" SET PROPERTIES (FROM_DATATYPE, TO_DATATYPE) VALUES ('double precision', 'DOUBLE PRÉCISION')
  Platform OMBALTER 'MYSQL' ADD TO_PLATFORM_TYPEMAP 'DOUBLE_FROMG' SET PROPERTIES (FROM_DATATYPE, TO_DATATYPE) VALUES ('DOUBLE PRÉCISION', 'double precision')
  --"
  
  Platform OMBALTER "MYSQL" ADD PLATFORM_TYPE "text".
  Platform OMBALTER 'MYSQL' PLATFORM_TYPE EDIT 'text' SET PROPERTIES (SYNTAX) VALUES ('text')
  Platform OMBALTER 'MYSQL' ADD FROM_PLATFORM_TYPEMAP 'TEXT_TOG' SET PROPERTIES (FROM_DATATYPE, TO_DATATYPE) VALUES ('text', 'CLOB')
  Platform OMBALTER 'MYSQL' ADD TO_PLATFORM_TYPEMAP 'TEXT_FROMG' SET PROPERTIES (FROM_DATATYPE, TO_DATATYPE) VALUES ('CLOB', 'text')
  
  help highly appreciated ;-)
  
  Philippe
  
  Published by: user11987935 on August 18, 2010 13:56

  Hi Philippe,.

  Try this...
  Set the mapping in the basic mode GAME...
  Right-click the mapping-> select Configure
  Under Options-> generation of Code generation Mode-> defined in function
  Under Runtime Paramerters-> default Mode Operting-> defined in function

  Deploy the mapping and try again...

  Kind regards
  Suraj

• Problem with some fonts of symbols after the installation of the Sierra

  Hello

  I have recently upgraded the OS on my iMac late 2012 for Sierra, since doing so, I noticed a problem with several fonts.

  All symbolic symbols Apple to Wingdings fonts not correctly displayed in the font book. Apple symbols looks like a standard wheelbase of san, and other symbolic fonts just show as question marks '?' where the images should be.

  In text editing, that I can't even see the symbolic fonts like Zapf Dingbats and Wingdings in the selector. However, they all work well in Adobe Illustrator (CS5) and Microsoft Word 2011. Apple symbols still looks like a standard font.

  I already tried the following:

  1. check the fonts in font book

  2 fix the duplicates in the font book

  3. using the "Restore Standard fonts" option in the font book

  4 deleting a file in the folder Preferences plist Fonts

  5 deleted the cache of police and the database

  I'm out of ideas. Has anyone else had the same problem found a fix?

  Kind regards

  Greville

  I'm just to add that I used the recovery partition to do a clean install of Sierra on a hard drive external and then booted into it to see if it had the same problem.

  And he does. Wingdings and other photo fonts appear as '?' in boxes where the letters must be in the font book.

  So this seems like a problem with the way Sierra displays these fonts, not with the font files themselves.