Problem with access: local only for wireless in Vista

Similar Questions

• Problem with Internet access: local only for wireless in Vista

  Help, please.  I have a Dell laptop and a Dell desktop computer.  The other day, I pressed WPS on my router Netgear wireless, and since then, my desktop computer (Windows Vista Home Premium SP2) was not able to connect to the Internet.  The office is connected to my router.  My Dell (Win 7 Pro) laptop is able to connect wirelessly to the router and Internet.

  That's what I tried:
  (1) I bought a new wireless router Netgear WNDR4500
  (2) I bought a cutting mini USB wifi adapter for the desktop.  Install the driver.
  (3) reset winsock, ipv4, ipv6, dns
  -netsh int ip reset reset.log
  -netsh winsock reset catalog

  ipconfig/flushdns

  (4) order McAfee firewall
  (5) restarted several times
  (6) persons with disabilities wired and wireless enabled - I get signal green/fort
  (7) off active and wired wireless
  None of the above seem to work.  I keep getting 'Access to local only' on both cables and wireless.  When I ping yahoo.com, I get no response.
  My laptop, however, works very well in the connection to the wireless router and also to the Internet.
  Anything else I can try?  Help, please!
  KT

  Hello

  Thanks for sharing the information valid.

  In case, if you need help, you can always post your questions as well as your valuable suggestions in this forum.

• I can connect to my network, but with access "local only".

  Access to the "Local" network only
  I can connect to my network, but with access "local only".  Internet became more intermittent (not sure if that is related or if I guess it) and did not work in several weeks.  Desktop computer is plugged into the router, but have the same problem when it is plugged into the DSL modem.  Other computers on the same router (wireless or other) work very well.  Recently, I removed Mcaffee and installed MS security essentials.  I uninstalled mcaffee of programs and settings then used the mcaffee removal tool to lighten the rest.  I uninstalled and reinstalled MS security essentials.  I thought it might be a firewall issue, but I get error 0x6D9 when I try to start it.  I tried all the steps in the following post, nothing helps.  Any other suggestions?

  ______________________

  You can follow the steps below and check if that helps you solve the problem.

  Method 1

  Try to power cycle the router and the computer and check if it helps.

  On the PC:

  1. Save your work and restart the machine.

  On the router or modem (if wireless printing):

  1. Unplug the router and the modem.
  2. Wait 30 seconds.
  3. Plug in the modem and wait for it to come to the ready state.
  4. Plug in the router.

  After you put cycle check the connection between the router and the computer.

  Method 2

  If the steps above do not help, you mayreset TCP/IP stack. To reset access the link below and either click on "Fix it for me" or follow the instructions to fix it yourself:http://support.microsoft.com/kb/299357
   
  Disable the IP helpdesk:
  1 hold the Windows key and type R, type "services.msc" (without the quotes) and press enter
  2. scroll down to the IP assistance service, right-click on it and select Properties
  3. in the drop-down list box that says "Automatic" or "Manual", set it to disabled and then click 'apply '.
  4. then click on "Stop" to stop the service from running in the current session
  5. click on OK to exit the dialog box

  Method 3

  Disable IPv6 and remove IPv6 virtual cards:
   
  Try to uninstall IPv6 on all interfaces, the removal of virtual cards of IPv6 and reset the TCP/IP stack. To remove the IPv6, go to the properties for each network adapter, and deselect the check box next to the Protocol "Internet Protocol version 6 (TCP/IPv6), which will turn off, or select it and click on uninstall, which withdraw power off the computer.» Then go into Device Manager and remove any 4to6 adapters, adapters miniport WUN or tunnel adapters.
  NOTE: You should do this for each network connection, even if they are disabled.

  Method 4

  Disable the DHCP Broadcast Flag:
  Link: http://support.microsoft.com/default.aspx/kb/928233
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://support.microsoft.com/kb/322756.  How to back up and restore the registry in Windows
   
  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
   
  To resolve this issue, disable the DHCP BROADCAST flag in Windows Vista. To do this, follow these steps:

  
  1. Click Start, type regedit in the search box, and then click regedit in the list programs.
  2. If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
  3. Locate and then click the following registry subkey:
  4 HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\ {GUID}
  5. in this registry path, click the (GUID) subkey that corresponds to the network adapter that is connected to the network.
  6. on the Edit menu, point to new, and then click DWORD (32-bit) value.
  7. in the new area #1, type DhcpConnEnableBcastFlagToggle and press ENTER.
  8. right click on DhcpConnEnableBcastFlagToggle, then click on modify.
  9. in the value data box, type 1 and then click OK.
  10. close the registry editor.
   
  By setting this registry key to 1, Windows Vista's trying to get an IP address using the BROADCAST flag in DHCP Discover packets. If that fails, he will try to obtain an IP address without using the BROADCAST flag in DHCP Discover packets.
  You can also try uninstalling and reinstalling the driver for the wireless card.

  ________________

  Thanks for any help!

  Hello

  All changes to the software or hardware of the computer?

  Method 1:

  Visit the link below and follow the steps.

  Of network connectivity status incorrectly as 'Local' only on a Windows Server 2008 or Windows Vista-based computer that has multiple network cards

  http://support.Microsoft.com/kb/947041

  Method 2:

  Update the NIC drivers and check.

  Network adapter problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems

• Problem with access point or wireless adapter

  Hello world

  tried to connect to my WiFi, but the convenience store detects that the problem with access point or wireless adapter.
  The drivers are up-to-date and functioning normally. There were discussions on BIOS but I don't know if I would be able to complete the task without bricking your laptop.

  Is there any online support?

  Hi smert

  Your message is not really useful.
  Why? Because no one knows all the details of the laptop, wireless network card system...
  So please would you be kind enough to provide more details.

  But despite the missing information, I recommend:
  (1) reset your router WLan
  (2) check the connection to the WiFi unsecured. (of course for testing purposes)
  (3) check the different (WPA/WPA2 AES, TKIP) encryption

• Problems with access to Web sites in the laptop of my mother, both wireless and ethernet connections

  Original title: Internet issues

  My mother's laptop has suddenly stopped to access Web sites. I tried to explore, Firefox and Chrome using both wireless and ethernet... connections we both century link and I tried the two houses... my works laptop on both networks. All three browsers connect to the internet, but not all pages opens. I ran the store and he told me that I should look online for more help... which is not the case, but it cannot determine the problem. Any ideas?

  Hello

  Welcome to the Microsoft community.

  I understand that you have a problem with access to Web sites. We apologize for the inconvenience caused to you and appreciates your efforts to try to resolve the problem.

  I would like to know the details below to help you better

  1. Do you receive an error message/code when you access Web sites?
  2. Do you think that any symbol with exclamation on the icon of this internet access on the taskbar (right)?

  I ask you to try the steps in the Microsoft Help article below and check if it helps.

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows/cant-connect-Internet#1TC=Windows-7

  Also I ask you to reset TCP/IP and check if it helps.

  How to reset TCP/IP using the NetShell utility
  http://support.Microsoft.com/kb/299357/en-us

  Keep us updated on the issue to help you better.

• Continue to be "access: local only" on a laptop from windows vista Home premium.

  After about a year of just always connect with an Ethernet cable, I decided to solve the problem.

  First of all, I bought a new router and even a net-book with her. (net-book [windows 7] connected with ease), after a week of trying to get it to connect, I gave up.
  Second, I went through the trouble to find the recovery CD supplied with the laptop and restored to its default value of the plant. Despite this, it shows "access: local only.
  The system that I have a problem with is a Toshiba Satellite A135.
  Thanks in advance for anyone who can help you.

  The link below should help you

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-networking/fix-problem-local-only-when-connection-is-across-a/0949042d-074e-43ab-ba95-3c06cc2aa6be

• I had problems with access to most of the Web sites and I noticed that HTTPS is no longer, how do I make permanent HTTPS so I can access any Web site?

  I had problems with access to most of the Web sites and noticed that HTTPS no longer appears whenever I try to access a Web site. I can easily connect to my gmail and facebook account, but the problem is that when I click on a link on FB and gmail, I get the annoying message "refused to connect.

  How to address this issue, rather how to make HTTPS permanent so I can easily access any Web site. The date and time on my laptop are both correct. I am currently using OS x 10.9.5.Please!

  How to address this issue, rather how to make HTTPS permanent so I can easily access any Web site.

  My guess is that you have a damaged or invalid certificate entry OS X KeyChain, but to directly answer this question, I would say that consider you something like HTTPS Everywhere. Note, it is not available for Safari. It is available directly through the Google Chrome browser extensions.

• Satellite L875-13D - problem with the installation of the wireless card

  Hello

  I bought a Toshiba Satellite L875-13D. I installed Windows 7 Enterprise edition.

  I have a problem with the installation of the wireless card. I have downloaded the driver on Toshiba website, but it does not work. When I run the file .zip and .exe, nothing happens. In addition, there are several pilots: Athos, Intel and Realtek and I do not know what is mine... I test all the driver but same result.

  I have the same problem with Bluetooth driver that does not work too.

  Thank you for your help.

  > But it does not work yet for Bluetooth,... I have install the driver by the .exe from the Toshiba Web site but when I run the application, I have error that says missing tosbtapi.dll. I founded and downloaded and installed on budget3 and SysWOW. But after that, the installation is blocked. Any ideas?

  Laptop Satellite L875-13D isn t equipped with Bluetooth.
  Didn t you know who?

• Problems with access to the web pages, email, video, etc. even when I have 4-5 bars.

  I installed a Dell Wireless 1505 low-profile carrier 1.2 antenna dim/insp in desktop. Its a PCIe wireless lan card. But since last Tuesday patches have been installed I had problems with access to the web pages, email, video, etc., even when I have 4-5 bars.  Someone at - it an idea of what's going on.

  Hi William e. Swann

  1. what web browser do you use?

  Method 1:

  You can read the following article and check.

  You may experience connectivity problems or performance issues when you connect a portable computer that is running Windows Vista or Windows 7 to a wireless access point

  Method 2:

  You can also read the following article.

  How to troubleshoot network connectivity problems in Internet Explorer

  Hope this information is useful.

• I get a box that says, please verify your billing information. We discovered a problem with your last payment for creative cloud. Go online to manage your account and check your billing account. 19 days remaining. What is c?

  I get a box that says, please verify your billing information. We discovered a problem with your last payment for creative cloud. Go online to manage your account and check your billing account. 19 days remaining. What is c?

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• Problem with the local adjustment brush

  Problem with the local adjustment brush:

  Tire of a photo with the iso 6400 to a person and I wanted to increase the exposure of the face only. So I set the exposure compensation of at least 4 local adjustment brush, in order to see where I paint. In earlier versions of lighroom I got a smoth black area. My intention was, and then adjust the brightness to + 0.33 in order to get a slightly lighter face. But I have no black smoth area. Instead, I largely perforated black area. After setting the exposure to + 0.33, the face was indeed more light, but with many large tasks very ugly.

  The brush settings:

  Fat / size was 7.1.

  Weiche Kaiser / smoth edge was 50.

  River / stream was 60.

  Dichte / density was 100.

  Automask has been verified.

  Any ideas?

  Maybe it's because you have "Auto mask" checked the.  Uncheck the box before painting to see if that helps.

• Problem with access policies (create several resources)

  I'm having a problem with access policies:
  
  The first policy must create a resource.
  And the following policies should create childs on the resource.
  
  The problem here is that when the policies will add the childs, the resource is not configured yet.
  And then each will create a resource but I want just a single resource of the childs.
  
  
  When the resource is already deployed, policies to update this resource correctly.
  
  How can I fix?
  
  TKS

  Ricardo,

  I had a similar problem. In a post processing Manager, I managed the membership of the user to specific through the removeMemberUser roles and the addMemberUser of the tcGroupOperationsIntf class.
  The last parameter of this method is a Boolean value that, if true, would automatically trigger access by programming strategies in post processing.
  The problem is that there also is an OOTB handler for triggering access rules, so I was basically triggering twice access policies and duplicate resources appear.

  I hope this helps.

  See you soon

• problem with my laptop asking for the administrator password or power on password

  I have the same problem with my laptop asking for the administrator password or power on password. It is a compaq presario cq61. It happened when my hard drive failed and was not used for a long time. With the password, any help would be much appreciated. It says system turn off after a few trials with the key: 55427586

  Hello

  Try to enter: 40585508

  Kind regards

  DP - K

• I'm having a problem with a sound used for Norton ccSvcHst.exe process. And perhaps dwm.exe

  I'm having a problem with a sound used for Norton ccSvcHst.exe process. I have all the dates of the last mounted and I roughly 1 000 000 errors page an hour and the hard drive of my computer is crazy with me doing nothing. Norton has been included in the software package supplied with the computer. so I hope that support you. What can I do to calm my computer runs to stop this service... I have also about 500 000 for the service dwm.exe. What could cause this?

  Hi dude, on average

  A. from when what happens?

  B. recent changes made on your computer?

  C. you get any error message?

  First of all, I suggest you to uninstall and reinstall Norton using the Norton Utilities disk and check if the problem persists.

  Second, you may have to perform an auditor of the system files on your computer in order to replace the files corrupted on your computer.

  Open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  Type the following command and press ENTER: sfc/scannow

  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  Bindu S - Microsoft Support
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Facing a problem with writing the custom for WLS identity assertion provider

  I am facing a problem with writing the custom for WLS identity assertion provider.

  Requirement:

  Asserter identity configured in WLS should get called when the following cookie is sent in a request by my application
  cookie name: OAMAuthnCookie_blr1234567.idc.oracle.com:7777
  
  I added the name of the cookie as a token of support and Active token in WeblogicCustomIdentityAsserter.xml
  
  < MBeanAttribute
  Name = "SupportedTypes.
  Type = "java.lang.String [].
  Writeable = "false".
  Default = "new String() {& quot; OAMAuthnCookie_blr1234567.idc.oracle.com:7777 & quot ;}.
  / >
  <!-ActiveTypes attribute contains the subset of your mbean SupportedTypes who are active in the area. ->
  < MBeanAttribute
  Name = "ActiveTypes".
  Type = "java.lang.String [].
  Default = "new String() {& quot; OAMAuthnCookie_blr1234567.idc.oracle.com:7777 & quot ;}.
  / >

  Problem:

  Identity asserter provider is not invoked for the request that has the cookie named OAMAuthnCookie_blr1234567.idc.oracle.com:7777.
  
  I did some experiments with the cookie name, to see where the problem could be
  
  Identity asserter provider is triggered for the following cookies:
  OAMAuthnCookie_blr1234567.idc.oracle.com7777.
  blr1234567. IDC. Oracle
  blr12_XXX. IDC. Oracle.com
  
  and it does not work for cookie name - OAMAuthnCookie_blr1234567.idc.oracle.com:7777
  
  I think that the name of the token supports not the colon. I don't have control over the name of the cookie, two points will always be
  
  Tried it with giving the name of the cookie after the encoding of the colon
  

  < MBeanAttribute

  Name = "SupportedTypes.

  Type = "java.lang.String [].

  Writeable = "false".

  Default = "new String() {& quot; OAMAuthnCookie_blr2211441.idc.oracle.com & #58;. 7777 & quot ;} »

  / >

  
  But still does not work
  Am I missing something? Any help will be appreciated.
  Help, please!

  colon ': ' is an illegal character in the name of the cookie.

  RFC 2616, Section 2.2 says:

  token = 1 *.

  separators = "(" | ")" | " <" |="" "="">" | " @"

  | "," | ";" | ":" | " \" |<">

  | "/" | "[" | "]" | "?" | "="

  | "{" | "}" | SP | HT

  It is clear ":" a "separator" and thus not allowed in a token or a cookie name.