Problem with bind variable and as operator usage

Similar Questions

• Problems with Bind Variables

  SELECT co.ref_num, co.forename, co.surname, co.dob, a.address, a.postcode,
         co.ni_num
    FROM address a, contact co
   WHERE co.ref_num = a.ref_num
     AND (:1 IS NULL OR co.forename = :2)
     AND (:3 IS NULL OR co.surname = :4)
     AND (:5 IS NULL OR a.postcode = :6)
     AND (:7 IS NULL OR a.address = :8)
     AND (:9 IS NULL OR co.dob = :10)
     AND (:11 IS NULL OR co.ni_num = :12)

  With a jdbc connection, we use a web front end for a new management system. The SQL above runs since a search screen. We meet a few serious problems with bind variable and execution plans. When the above query is sent by the database 'AND' clauses could evaluate as follows:
  

  AND ('Tim' IS NULL OR co.forename = 'Tim')
     AND ('Clarke' IS NULL OR co.surname = 'Clarke')
     AND ('' IS NULL OR a.postcode = '')
     AND ('' IS NULL OR a.address = '')
     AND ('25051981' IS NULL OR co.dob = '25051981')
     AND ('' IS NULL OR co.ni_num = '')

  We cannot dynamically assign 'AND' conditions so they are sent through to the database. This translates FTS 99% of the time as the execution plan never prescribed any of the available indices.
  
  Someone has suggestions on how to better 'control' bind variables?

  Hello

  Don't you think that 'OR' Conditions are necessary to check for Null, where the binding variable is NULL or not.

  I think that rather than running the query from the front to FB, try to convey the values of some MS and run this query in the procedure, the extraction from the point of view Design coding application. Never fire the query of the frontal part.

  To come to the problem.

  SELECT co.ref_num, co.forename, co.surname, co.dob, a.address, a.postcode,
  Co.ni_num
  ADDRESS, contact co
  WHERE co.ref_num = a.ref_num
  AND (: 1 co.forename IS NULL or =: 2)
  AND (: 3 co.surname IS NULL or =: 4)
  AND (: 5 a.postcode IS NULL or =: 6)
  AND (: 7 a.address IS NULL or =: 8)
  AND (: 9 co.dob IS NULL or =: 10)
  AND (: 11 co.ni_num IS NULL or =: 12)

  Use the procedure.

  Fact exits of the indexes on the tables and stats are updated...?
  Try to predict explain it. ??

  -Pavan Kumar N

• problem with bind variables in the SQL query view object

  Hi all

  I use JDev 11.1.2.4.0.

  I have a problem with bind variables in the SQL query view object.

  This is my original SQL

  SELECT sum(t.TIME) , t.legertype_id
  FROM LEDGER t
  WHERE t.nctuser_id = '20022' 
        AND to_char(t.insertdate,'YYYYMMDD') in ('20130930','20130929')
  group by t.legertype_id
  

  In my view .xml object query tab, I am writing this

  SELECT sum(t.TIME) , t.legertype_id
  FROM LEDGER t
  WHERE   t.nctuser_id = '20022'
      AND to_char(t.insertdate,'YYYYMMDD') in :dddd
  group by t.legertype_id
  

  Davis here is a variable of Type liaison: String, updatable and necessary.

  I try to deal with Davis as ('20130930 ', ' 20130929') hoping the view object, run as my original SQL.

  But failed. The view object retrieves 0 line after that I run.

  Why?

  Thank you! ('2original SQL0130930', '20130929') ('20130930 ', ' 20130929')

  A variable binding cannot be used as this is why you must use years table. Check decompilation binary ADF: using oracle.jbo.domain.Array with ViewCriteria to see a solution.

  Timo

• Problem with Bind variable cannot be changed.

  Hi all
  I use Jdev 11.1.2.3.0. In my VO, I created a Bind Variable and set it NOT UPDATABLE. Then, I created a display with some other Variables Bind criterion.
  I use this criterion to display on a search page, but when running, I see also an inpunt for the defined variable NOT UPDATABLE text and I can't change its value.
  Of course, if I try to change the value, and I do research, I get an error.
  
  It is the source of the VO:
  
  < variable
  Name = "UlssVar".
  Type = "where".
  Type = "Java.lang.String"
  IsUpdateable = "false" >
  < TransientExpression > <! [CDATA [adf.context.current.sessionScope.get ('ulss')]] > < / TransientExpression >
  < / variable >
  
  Is this a bug of the ADF?
  I thank in advance.

  Hello

  try selecting the variable binding and open the property inspector, under the guidance of the user interface, set the flag of 'view' to hide. This should hide it (no bug for this reason)

  Frank

• EO base extension VO with bind variables and display - How To link

  Hello

  I extended an APInvDistAllVO view object by adding two fields which are functions. Basically, in the invoice approval screen, I want to add two fields where the distribution of the invoice is shown.

  The SQL contained in jdeveloper when you extend the VO object is different from the query, what I see in the invoice approval page by clicking on the APInvDistAllVO link. There are two bind variable: 1 = invoice_id and: 2 = line_number being added dynamically. After the extension of the view object, the invoice distribution line is displayed as no record found.

  In my opinion, it is due to not having bind variables does not correct parameters being passed, and under this point of view object is an object depending on the invoice header record. There is a link to the original View object as well. Will be very grateful if someone can provide the way forward in dealing with this situation.

  Rgds Fahad

  Hi AJ

  He worked after changing the style of bind.

  Thank you very much.

  Rgds

  Fahad

• Hello I have problem with my site, and mozilla. Google chrome, safari, explorer, opera work ok. Mozilla Heve problem with images?

  Hello I have problem with my site, and mozilla. Google chrome, safari, explorer, opera work ok. I have Sobipro for both the company and the logos and images without work!
  When I try to open the url is this:http://www.athens-dayandnight.gr/images/sobipro/entries/288/587_img.jpg

  whith mozilla is the following: /images/sobipro/entries\288\587_img.jpg when ichange it------with this / work.

  any idea?

  Thank you

  Hello, the URLS that contain-in their path are not valid. Firefox is less tolerant to errors in this respect than other browsers.
  Correct the path to http://www.athens-dayandnight.gr/images/sobipro/entries/288/587_img.jpg in the source code of this site or if you don't control the contact of the site their webadmin to do...

• Need help with Bind variable in AF LOV query

  Hello
  
  I have a problem with the binding variable, if I use bind variable in the VO LOV query then my result does not come, if he has do not bind variable it works fine and if I use the variable binding in the LOV search option then it works fine but if I hide the bind variable and set the value in the prepareSesstion AM method the LOV does not return any value. I try to return the values that also all values are also coming, but these values are not the attribute query AF setting.
  
  Query is:
  
  Select substr(d.description,0,40) description
  cm_system_users has
  b cm_user_responsibilities,
  cm_responsibility_processes c,
  cm_processes d
  where a.nt_login =: B_NT_LOGIN
  and a.user_id = b.user_id
  and trunc (sysdate) between b.eff_date and nvl (b.exp_date, sysdate + 1)
  and b.RESPONSIBILITY_ID = c.RESPONSIBILITY_ID
  and c.process_type = d.process_type
  and d.enabled_flag = 'Y' order of d.arguments_flag
  
  FOLLOW the method:
  
  CmProcessViewImpl vo = getCmProcessView();
  String nt_login = getUserPrincipalName();
  vo.setNamedWhereClauseParam ("B_NT_LOGIN", nt_login.toUpperCase ());
  vo.executeQuery ();
  
  Can someone help me with this. It is urgent for me.

  It's a bit underdescribed. IIUC, the purpose of the notice is used as a target for a correct view accessor? (Otherwise, you will have to be more explicit about what you mean by "LOV query".

  If I'm right, there are two possibilities:

  (1) you use an instance of VO in a module shared application instance. If so, make sure that your code is in the prepareSession() for the class of application that module if it is dependent on session (as seems to be below), you must make sure that the module of the application instance is shared in the session scope.
  (2) you have based the view accessor directly on the definition of the VO. This creates an anonymous instance of VO; I don't think there is a way to use prepareSession() to set a variable of liaison on such a forum (which will not be created until the accessor is first used). Pourriez be able to shoot with to put a similar code in the view object create() method class, but I've not tested this.

  If your code is in your module class application primary (as opposed to the class for a shared of AOS instance), the problem here is that getCmProcessView() returns the instance of VO data module of this application instance design-time model, which is never used by accessors of the view.

  Also, why do you need to do this in prepareSession() rather than at the level of the accessor to view? I believe you can get the user name (for the view accessor) with the groovy expression

  viewObject.DBTransaction.session.userPrincipalName

  or maybe just

  DBTransaction.session.userPrincipalName

  (despite this DBTransaction involving, it returns the username web app, not the DB user name).

  It is a declarative 100% solution, if you don't count the Groovy expression as not declarative.

  If you are afraid of a user who is running the LOV (somehow) before the value of the bind variable is preparing, just make sure that the binding variable is marked "required."

• Problem with the report and the system of axis 2d

  Hi, I'm trying to write a script with tiara, who wrote a 2d axis system in the report but I'm having a lot of problems with it.

  What I'm trying to do, is make 3 or more system axis 2d in the report, each displaying a part of the data of 2 channels (x = ch0, ch1 = y).

  With only 1 graphic I get what I want, but when I try to add the 2nd or the 3rd, they show without my defined x-scale and with the offset x different from the first chart.

  I tried everything, but I could not remedy

  I added as attachments the .csv file that I use to ch0 and ch1 and 2 screen shoots "what I get" (about the problem with the script) and "what I hope to get" (done manually, is what I'm trying to get the report)

  Any help will be appreciated, thanks in advance

  Ierman

  I'll post my code here:

  Dim Xscale, Yscale
  XScale = Array (0,25,0,5,49)
  Yscale = Array(-0.2,0.2,-0.2,10,4)
   
  Call PicDelete()
  Call GraphObjNew ("2D-Axis", "2DAxis1")
  Call GRAPHObjOpen ("2DAxis1")
  D2AxisTop = 1

  D2AxisBottom = 70
  D2AxisLeft = 1
  D2AxisRight = 1
  Call GRAPHObjOpen ("2DYAxis1_1")
  D2AxisyScaleType = "manual".
  D2AXISYBEGIN = Yscale (0)
  D2AXISYEND = Yscale (1)
  D2AXISYORIGIN = Yscale (2)
  D2AXISYTICK = Yscale (3)
  D2AXISYMINITICK = Yscale (4)
  Call GRAPHObjClose ("2DYAxis1_1")
  Call GRAPHObjOpen ("2DXAxis1_1")
  D2AxisxScaleType = "manual".
  D2AXISXBEGIN = Xscale (0)
  D2AXISXEND = Xscale (1)
  D2AXISXORIGIN = Xscale (2)
  D2AXISXTICK = Xscale (3)
  D2AXISXMINITICK = Xscale (4)
  D2AxisXTxt = ""

  D2AxisXColor = 'black '.

  D2AxisXTickAuto = 1
  D2MTickLineWidth (1) = 0.1
  D2MTickLineType (1) = "solid".
  D2AxisXTickSize = 60
  D2AxisXTxtAutoCo = 0
  D2MTickColor = "red".
  Call GRAPHObjClose ("2DXAxis1_1")
  Call GraphObjNew("2D-Curve","New_Curve")

  Call GraphObjOpen ("New_Curve")

  D2CCHNX = "[1] / [1]" "

  D2CCHNY = "[1] / [2]" "

  D2CurveColor = "red".
  Call GraphObjClose ("New_Curve")
  Call GRAPHObjClose ("2DAxis1")

  Dim Xscale1, Yscale1
  Xscale1 = Array (25,50,0,5,49)
  Yscale1 = Array(-0.2,0.2,-0.2,10,4)
  Call GraphObjNew ("2D-Axis", "grafic")
  Call GRAPHObjOpen ("grafic")
  D2AxisTop = 40

  D2AxisBottom = 37
  D2AxisLeft = 1
  D2AxisRight = 1
  Call GRAPHObjOpen ("2DYAxis1_2")
  D2AxisyScaleType = "manual".
  D2AXISYBEGIN = Yscale1 (0)
  D2AXISYEND = Yscale1 (1)
  D2AXISYORIGIN = Yscale1 (2)
  D2AXISYTICK = Yscale1 (3)
  D2AXISYMINITICK = Yscale1 (4)
  D2AxisYTxt = "" ' testo asse label y
  Call GRAPHObjClose ("2DYAxis1_2")
  Call GRAPHObjOpen ("2DXAxis1_2")
  D2AxisxScaleType = "manual".
  D2AXISXBEGIN = Xscale1 (0)
  D2AXISXEND = Xscale1 (1)
  D2AXISXORIGIN = Xscale1 (2)
  D2AXISXTICK = Xscale1 (3)
  D2AXISXMINITICK = Xscale1 (4)
  D2AxisXTxt = «»

  D2AxisXColor = 'black '.

  D2AxisXTickAuto = 1
  D2MTickLineWidth (1) = 0.1
  D2MTickLineType (1) = "solid".
  D2AxisXTickSize = 60
  D2AxisXTxtAutoCo = 0
  D2MTickColor = "red".
  Call GRAPHObjClose ("2DXAxis1_2")
  Call GraphObjNew("2D-Curve","New_Curve1")

  Call GraphObjOpen ("New_Curve1")

  D2CCHNX = "[1] / [1]" "

  D2CCHNY = "[1] / [2]" "

  D2CurveColor = "red".
  Call GraphObjClose ("New_Curve1")
  Call GRAPHObjClose ("grafic")

  Hi lerman,.

  Here is an edited version of your code that works on my computer.  A problem that I know that I fixed it was that your presentation of the STATE was in the name-oriented mode but you use the variables based on the number to assign it X and Y channels.  The execution of these commands in a loop FOR makes it much easier to debug the code and to avoid any annoyance at first.

  Brad Turpin
  Tiara Product Support Engineer

  National Instruments

• Bind Variables and using the keyword

  In my dynamic SQL, I use the same variable in several places in my query. Is there a way to avoid rewriting the same value multiple times in the list of arguments to bind? It is something like that - only pseudo code.
  

  DECLARE
  tSQL VARCHAR2(99)
  pVal INT := 2;
  
  BEGIN
  tSQL := 
             'SELECT * ' ||
             '  FROM dual ' ||
             ' WHERE col1 =: iVal ' ||
             '   AND col2 IN (SELECT col2 ' ||
             '                  FROM dual  ' ||
             '                 WHERE col1 =: iVal) ' ||
             ' UNION ' ||
             ' SELECT * ' ||
             '   FROM dual ' ||
             '  WHERE col1 =: iVal';
  
  EXECUTE IMMEDIATE tSQL 
  USING pVal, pVal, pVal;  -- Is there a way to avoid having to rewrite the same bind variable argument three times since the value is the same?
  
  END;

  Is there a way to avoid having to rewrite the same argument three times bind variable as the value is the same?

  Etbin wrote:
  http://docs.Oracle.com/CD/E11882_01/AppDev.112/e25519/dynamic.htm#BHCHIHEJ says:
  Placeholders are associated with bind variable in the USING clause of position, and not by name.

  Concerning

  Etbin

  The exception to this rule is if the SQL statement is an anonymous block or a call statement. In this case, the repetition of the names of the placeholder is significant.

  http://docs.Oracle.com/CD/E11882_01/AppDev.112/e25519/dynamic.htm#CHDFHEAG

  For example, the following will fail with ORA-01008: not all variables

  declare
   v_cnt number;
  begin
    execute immediate 'select count(*) from dual where 1 = :B1 and 2 > :B1'
    into v_cnt using 1;
    dbms_output.put_line(v_cnt);
  end;
  

  However, the following will succeed because the SQL code is in fact an anonymous block:

  begin
    execute immediate 'declare
                         v_cnt number;
                       begin
                         select count(*)
                         into v_cnt
                         from dual
                         where 1 = :B1 and 2 > :B1;
                         dbms_output.put_line(v_cnt);
                       end;'
    using 1;
  end;
  

  Pretty cool stuff.

• Insert with bind variables

  I will execute bind_test.sql with the following parameters to sql-plus. The script runs without error. However, it does not insert a row in the table.
  
  
  bind_test. 20100912 1 1001 SQL;
  
  
  bind_test. SQL
  ----------------------------------------------------------
  Set serveroutput on
  
  declare
  
  X VARCHAR2 (31);
  NUMBER OF Y;
  NUMBER OF Z;
  
  Start
  
  dbms_output. Enable (10000);
  X: = "& 1";
  Y: = & 2;
  Z: = & 3;
  
  Insert in the test
  values (TO_DATE (X, 'YYYYMMDD'), Y, Z, null, null, null);
  
  
  commit;
  
  
  dbms_output.put_line ('var1 = "|") X | "var2 =" | THERE | "var3 = ' |" (Z);
  
  end;
  /
  
  ----------------------------------
  Output:
  10 old: X: = "& 1";
  10 new: X: = '20100912';
  old 11: Y: = & 2;
  11 new: Y: = 1;
  12 old: Z: = & 3;
  12 News: Z: = 1001;
  var1 = 20100912 var2 = 1 var3 = 1001
  
  PL/SQL procedure successfully completed.
  ---------------------------------------
  
  Select * from test;
  
  no selected line
  
  
  Why it is not insert a line? What could be the reason?
  
  Thanks in advance.
  Amit

  user5922214 wrote:

  I have a big script with multiple INSERT and DELETE statements. I have been asked by DBA to use bind variables rather than direct assignment parameter values in which the condition.

  Impossible.

  Use of variable bind from a client means:
  (1) customer create a unique SQL cursor with bind variable, for example INSERT INTO FOOTABLE VALUES (: 1,: 2: 3)
  (2) customer from a loop of data read
  2.1) reading the customer data (from file, network, device, whatever)
  customer liaison variables 2.2) cursor (assigning values to 1 to 3 SQL cursor variables)
  2.3) client running the cursor
  line insertions 2.4) database
  loop repetitions of 2.5) client for all data
  (3) customer closed the SQL cursor

  This can be done using a SQL script - as a SQL script is not a loop where a single insertion cursor is used. It's a unique script with 100 or 1000 of SQL insert statements. Where each insert statement will result in a cursor SQL must be created.

  SQL * also does not support the approach of customer liaison above variable. It is a command line interface very PRIMITIVE and unsuitable for running scripts from loading/data entry.

  In your case - the right approach would be to have the data into a CSV file, and then load this file using SQL * Loader... where this software will use customer approach above (in fact he still does better because it uses in bulk link and link not row as described above).

• problem with the CURSOR and WITH clause

  Hi guys,.
  
  I have never created a package before. I try to run it, but I get:
  ORA-06550: line 8, column 16:
  PLS-00382: expression is of the wrong type
  ORA-06550: line 8, column 3:
  PL/SQL: Statement ignored
  
  I know that my problem is in the next section
  
  OPEN FOR V_io_cursor
  
  with GOT_R_NUM like)
  
  
  Is the above correct?
  
  When I copy paste the "heart" of the query, it works very well. I really have a problem with the CURSOR and the declaration.
  
  Here's the code in its entirety. I know that the code is much more then he returned, but ignore this overload that was to do some tests to make sure that I can achieve any query request.
  
  CREATE OR REPLACE
  PKG_SPF_NATIONALREPORTS PACKAGE BODY IS
  
  PROCEDURE GET_NATIONAL_TOTAL_RESULTS (P_SelectFields IN varchar2, P_SUMFields IN varchar2, io_cursor IN OUT C_RESULTS)
  IS
  v_io_cursor C_RESULTS;
  
  BEGIN
  
  OPEN FOR V_io_cursor
  
  with GOT_R_NUM like)
  SELECT
  -START P_SelectFields
  r.cli_served,
  r.EIER,
  -END P_SelectFields
  r.RC,
  r.Year_ID,
  r.period_id,
  r.agreement_type_ind,
  CONTRACT_NUMBER. CONTRACT_NUMBER_TEXT,
  YEARS.year_desc,
  RC_CODE.rc_code_id,
  RC_CODE.rc_code,
  AHRDA HOLDERS. AHRDA_ID,
  AHRDA HOLDERS. REGION_ID,
  AHRDA HOLDERS. PROVINCE_ID,
  AGREEMENT_TYPE. AGREEMENT_TYPE_ID,
  AGREEMENT_TYPE. AGREEMENT_TYPE_DESC_EN,
  ROW_NUMBER() over (partition R.YEAR_ID, R.CONTRACT_Number_Text
  order by
  P.PERIOD_desc
  (/ / DESC NULLS LAST) AS r_num
  RESULT r
  JOIN period p ON r.period_id = p.period_id
  JOIN CONTRACT_NUMBER ON r.contract_number_text = CONTRACT_NUMBER. CONTRACT_NUMBER_TEXT
  JOIN RC_CODE ON contract_number.rc_code_id = rc_code.rc_code_id
  JOIN AHRDA holders ON ahrda.ahrda_id = rc_code.ahrda_id
  JOIN AGREEMENT_TYPE WE AHRDAS. AGREEMENT_TYPE_ID = AGREEMENT_TYPE. AGREEMENT_TYPE_id
  JOIN the YEARS WE r.year_id = YEARS.year_id
  )
  SELECT year_desc
  -START P_SUMFields
  SUM (cli_served) AS sum_cli_served
  The SUM (eier) AS sum_eier
  -END P_SUMFields
  OF got_r_num
  GROUP BY year_desc
  ORDER BY year_desc
  ;
  
  io_cursor: = v_io_cursor;
  
  END GET_NATIONAL_TOTAL_RESULTS;

  Agree - all this talk of loops FOR is completely irrelvant.
  A refcursor is usually the exact mechanism to return a result set.

  What is C_RESULTS?

  Just use SYS_REFCURSOR.

  No need for local variable.

  OUT why? Not just walk OUT?

  PROCEDURE GET_NATIONAL_TOTAL_RESULTS
  (P_SelectFields IN varchar2, P_SUMFields IN varchar2, io_cursor OUT SYS_REFCURSOR)
  IS
  BEGIN
   OPEN io_cursor FOR ...
  END;
  

• Satellite Pro C650D - problems with the audio and game controllers

  Hello

  I recently had problems with my microphone and speakers/headphones and game controllers.
  Sometimes the microphone stops working when on Skype, for example, but most of the time works fine, once again, when I restart the pc.

  Stakeholders sometimes still work when I connect headset.
  Some of the sounds are still coming through the speakers while some coming through the headphones.

  I have a usb game controller which also did not work everything properly.
  If I assign buttons in the program that they do not work in the game.

  All these devices are in Device Manager in a group that makes me think it's sort of annoying update doubtful that messes with them.

  Any body have similar problems or know what to do better?

  See you soon
  Laurin

  Hello

  Can you please send some details on the laptop model and the system you are using?

  With regard to the issue of sound/mic:
  > The microphone sometimes stops working when on Skype, for example, but most of the time works fine, once again, when I restart the pc.

  Are you talking about internal microphone or external? This only happens using Skype?
  In your case I would test the microphone using different applications to make sure that is not a Skype related issue.

  > Yet sometimes the speakers work when I connect headset.
  I recommend this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=65295

  The user has had a similar problem, but this phenomenon was linked to the Realtek HD Audio Manager settings.
  She wrote:
  + In the upper right corner, there is a small yellow folder called "Connector settings" in my version. +
  + There, finally I could re-enable the setting "enable popup dialog box, when the unit is plugged. +

  + So now when I plug an external speaker or headphones, it appears, and I select the option "helmet" (instead of "line-in"), and then the sound only through the headphones/ext.speaker.+

  Regarding the game controller:
  > I have a usb game controller which also did not work everything properly.
  > If I attribute buttons in the program, they do not work in the game.
  I put t think its problem of laptop in my opinion, you must make sure that the controller is compatible with the games you play and also recommended to check some info provided by the manufacturer of the game controller.

• How can I return to 6.3 4.0 I have never had a problem with 3.6 and now 4.0 crashes all the time tell me how to go back

  How can I return to 4.0 3.6 I've never had a problem with 3.6 and now 4.0 crashes all the time tell me how to go back

  Downgrade to Firefox 3.6 first of all uninstall Firefox 4, but do not select the option 'remove my Firefox personal data '. If you select this option, it will delete your bookmarks, passwords and other user data.

  Then you can install the latest version of Firefox 3.6 available to http://www.mozilla.com/en-US/firefox/all-older.html - it will automatically use your favorite courses, passwords etc.

  I recommend, to avoid possible problems with decommissioning, accessing your profile folder and delete the following files if they exist - extensions.cache, extensions.rdf, extensions.ini, extensions.sqlite and localstore.rdf. Delete these files will force Firefox to rebuild the list of installed extensions, check their compatibility and cancel the toolbar customizations.

  For more information on how to find your profile folder, see https://support.mozilla.com/kb/Profiles

• Problems with wifi, bluetooth and gps in my iphone after updating iOS 6

  After that the last iOS 9.3 update my iphone 6 has problems with wifi, bluetooth and gps. Now, my wifi connection is slower and falls easily on a short distance. My bluetooth does the same. But the biggest problem is the GPS on my phone. I tried Island:

  -By doing a reset network

  -Do a reset total and restore my phone

  -To restart my phone twice.

  -Audit and third-party applications unnistalling

  Nothing works. I was in the apple store where they checked my phone and they say everything is ok with the phone. I'm not crazy, and I know when something does not work correctly. Also, I think it's iOS 9.3 update a reaponsible for my phone issues.

  Please fix bugs fast.

  Having the same exact problems since the upgrade. In addition, battery drains very quickly now, and sometimes the phone becomes very hot. It took to the Genius Bar and they told me everything was normal in the diagnostic tests. Restored, restarting, etc., and always the same problems. GPS locates me, but then don't follow my movement at all and told to go outside as the gps is not detected even if I am outside. Bluetooth connection to the car and watch grave intermittently. Signal WiFi is greatly reduced and falls easily.

• HP 15 laptop: problem with the touchpad and the key "stuck."

  Hello!
   
  Last weekend, I have an irritating problem with my HP 15 laptop. Bought two years ago and upgrades to Windows 10 a year ago.
   
  First of all, my touchpad started to not work properly. It "freezes" and I can't use it until I click the ESC key, but it doesn't last and "freezes" again a few seconds later. Then, everytime I open a window where there is a text box (Start menu, edge browser, Control Panel, etc.), the number 5 is entered automatically and permanently, as if the button 5 has been blocked. I did a quick check and button 5 do not seem physically stuck.
   
  Yesterday, I restored the system to the factory settings, so I'm back to 8.1 for Windows and then upgraded to Windows 10. Everything seems to work fine, but this morning, the problem was back. Is there something I can do? What is the problem caused by Windows 10 or the computer? Should I restore it to Windows 8.1? Everything worked great til last weekend, I don't know what that was.
   
  Thank you in advance for your help!

  Welcome to the HP support community @gouch3.

  I understand that you have a problem with the keyboard and the touchpad on your laptop from HP 15.

  Have you tried to use a keyboard external and mouse at all?

  Have you tried to go to Safe Mode to see if the problems persist in there?

  Have you tried to perform a material or forced reset Reset?

  Did you do a test of material?

  Have you updated your drivers?

  gouch3 wrote:

  ... Is there something I can do? What is the problem caused by Windows 10 or the computer? Should I restore it to Windows 8.1? Everything worked great til last weekend, I don't know what that was.

  It could be a driver problem to be able to look at that for you, I need your model number. I wish I could give you an answer or not, but at this point without the troubleshooting results and the model number, it is difficult for me to say.

  I can say that if everything works in point 8.1 of Windows without problem, the driver TROUBLESHOOTING is a great place to start. Please try to follow these steps for the keyboard and the touchpad of troubleshooting:

  • Beginning
  • Search for Device Manager
  • Search results, open Device Manager.
  • Click on display
  • Show hidden devices.
  • Click the arrow next to keyboards.
  • Right click on the name of the keyboard device.
  • Select uninstall.
  • Continue deleting the names of devices in the category keyboards until the feature of all the names have been uninstalled.
  • Restart the laptop twice.

  Touchpad:

  • Type of research, "Device Manager."
  • Click on Device Manager,
  • Expand mice and other pointing devices.
  • Right click on the TouchPad,
  • Click on uninstall.
  • Restart the computer laptop twice,
  • Reinstall the TouchPad card.

  I found a document of troubleshooting for you to try also called Portable keyboard troubleshooting. Please be sure to follow the steps described in this document.

  The best document I have for TouchPad problems is the use and troubleshooting of the TouchPad and ClickPad document. 

  Here is a link to the HP Support Assistant, if you need it. Just download and run the application and it will help with the software and drivers that need to put up-to-date.

  This is a great question other clients may also be questioned. When we came to a resolution, please share what has worked for you with others by marking this post as an acceptable Solution. If you want to show appreciation for my efforts today, please take a second to click the Thumbs Up button below.

  If you need assistance, I would be more than happy to continue to help you. Please re-post with the results of the resolution of the problems. Could you please also provide your model number (How can I find my model number or product number?)

  Thank you!