Creating table and use - part 2

Similar Questions

• Creating table and use - part 1

  be no difficulty with arrays in C, etc. but creating tables of LabVIEW poisoned me. Unfortunately, the heart I sure table labs start out with a table already in place is not much help either. For example, in the attachment, I have a simple loop generating a series of figures that I want to put in a picture. I place a table on the block diagram and its type sucks and I can't find a good way to change it. The textbook says to drag an object in the table on the front panel. So, how is - a hang out an integer in an array?

  Thank you

  JVH

  jvh75021 wrote:
  Thanks for the post. Where did you get the constant that you drag in the table?

  I'll try to help in this form:

  

  Darren wrote:

  If you know the name of the object you want, you don't have to look at all the pallets.

  Amazing that NEITHER use YouTube for video hosting, because it is blocked by the firewall of our company.

  Andrey.

• Creating table and use - part 3

  I guess that everything first, there is an unwritten rule that says if you want to perform a constant operation on a table with multiple entries, you must connect the constant. When trying to wire the output of a table to a multiply function and the table is wired first of all the constant for the other terminal also wants to be a table. For example, I wanted to multiply the matrix by 2.

  JVH

  You can either file a digital constant or drop the constant matrix and drag the constant out of it.  Everything simply because you have connected the table first, does not mean that you cannot work with a scalar value.

  Go vote here to help change the current configuration

• CREATE TABLE and INSERT

  Hello

  I am a fairly new user for Oracle and have found this place to be very useful as I'm learning! One of the guidelines is to provide sample CREATE TABLE and INSERT data. I read the FAQ and in other forums to see if I could better understand this process, but I'm still struggeling reflected. Please can someone explain exactly what I do for these data, I want to be sure that I provided as useful information a lot in my posts to get help as soon as possible. I appreciate everything / all the answers!

  Hello

  Daniel Strong wrote:

  So, something like this:

  INSERT INTO skills (mu_id, external_id, skill_nm, skill_level) VALUES(220,AB,FAST,1);

  INSERT INTO skills (mu_id, external_id, skill_nm, skill_level) VALUES(7,BB,SLOW,7);

  INSERT INTO skills (mu_id, external_id, skill_nm, skill_level) VALUES(221,BC,FAST,1);

  INSERT INTO skills (mu_id, external_id, skill_nm, skill_level) VALUES(8,BD,SLOW,2);

  INSERT INTO skills (user_id, skill_nm) VALUES (AB, SLOW);

  INSERT INTO skills (user_id, skill_nm) VALUES (BB, SLOW);

  INSERT INTO skills (user_id, skill_nm) VALUES (BC, DOWN);

  INSERT INTO skills (user_id, skill_nm) VALUES (BD, SLOW);

  DESIRED RESULTS:
  MU_ID EXTERNAL_ID SKILL_NAME SKILL_LEVEL
  220 AB FAST 1
  221 AV FAST 1

  When you get a response, you want it works or is it OK if the answer causes errors?
  Obviously, you want people to post answers that work.  Make sure that the code of that validation works, too.  Test (and, if necessary, correct) your INSERT statements in your own development before posting on this forum system.

  The literal string values must be in single quotes.  I think you meant:

  INSERT INTO skills (external_id, skill_nm, mu_id, skill_level) VALUES (220, "AB", "QUICK", 1);

  Without the single quotes, AB and FAST are considered as column names or function.

• To loop through the table and use the values returned in another query

  Hello

  I tried to do something very simple, but still can not.

  I am trying to iterate on a table and use each line of a column in a where clause to display a query clause.

  For example:

  I want to retrieve all users of dba_users pass it to a clause where clause in a query to show for example account_status and profile of each user. But I want to do it in a way if I can turn the result in an html table.

  I tried too much really, so I'll post something that does not work, but which I think will show the problem I have,

  BEGIN
   FOR i IN (SELECT username from dba_users order by 1)
   LOOP
   EXECUTE IMMEDIATE 'select account_status from dba_users where username like ''||i.username||''';
   END LOOP;
   END;
   /
  

  Example of what I want to achieve:

  Suppose that there are two users, SYS, and SCOTT:

  USERNAME                       PROFILE                        ACCOUNT_STATUS
  ------------------------------ ------------------------------ --------------------------------
  SYS                            DEFAULT                        OPEN
  
  
  USERNAME                       PROFILE                        ACCOUNT_STATUS
  ------------------------------ ------------------------------ --------------------------------
  SCOTT                            DEFAULT                        OPEN
  

  Thanks in advance for your time,

  OD

  Hi Bill,

  Bill Citad kirjoitti:

  What a join or a sub query going to help me? honestly

  -- join
  select
    s.sql_id,
    h.loads_total
  from dba_hist_sqlstat h join v$sql s on (
    h.sql_id = s.sql_id
  )
  where rownum < 3
  ;
  
  -- subquery
  select
    sql_id,
    loads_total
  from dba_hist_sqlstat
  where sql_id in (
    select sql_id from v$sql where rownum < 3
  )
  ;
  
  -- correlated subquery
  select
    sql_id,
    loads_total
  from dba_hist_sqlstat
  where exists (
    select null from v$sql where sql_id = dba_hist_sqlstat.sql_id
  )
  and rownum < 3
  ;
  
  -- lateral inline view (12c)
  select
    s.sql_id,
    h.loads_total
  from dba_hist_sqlstat, lateral(
    select sql_id from v$sql where sql_id = h.sql_id
  ) s
  where rownum < 3
  ;
  

• & quot; Lock & quot; dataProvider when creating tables and DataGrids in loop

  I'm a loop in each element in an array and for each item, I try to create a new DataGrid on a new canvas and add each canvas of a ViewStack.
  
  I'm having problems in setting the dataProvider for the DataGrids. As part of the loop, I create a new ArrayCollection collection to serve the created for the latest DataGrid dataProvider. But since the loop uses a single ArrayCollection variable collection iterates the loop every time a new ArrayCollection collection is created, and created DataGrids dataProviders previously point to the new collection of ArrayCollection, rather than one that was created during the iteration. For example, I can end up with 10 DataGrids (on 10 paintings) in the ViewStack and all their dataProviders will point to the latest collection created ArrayCollection, rather than the collection created ArrayCollection in the same iteration of the loop that created this respective DataGrid.
  
  Is there a way to take a "cliché" (for lack of better terms) static of an ArrayCollection collection in each iteration and use it as the dataProvider for the newly created in this same iteration DataGrid? Any help or insight is appreciated.

  I think that I fixed it. Moving var dgArray:ArrayCollection; above dgArray = new ArrayCollection collection; seems to have done the trick and logical sense.

• Limiting the tables and using lindex in commands regexp

  Hello

  Here's my second and extremely crap question/post in what concerns the EEM/TCL.  I did some research on Google and have not really been able to find an answer to these questions.  Probably more due to my lack of agility with the search bar of the information being just is not there.  Hope you'll forgive me if.

  1. my first question is this.  Say I want to get an output of a command.  I would like to see all the interfaces in the 'ip vrf command show interface' for example.  Not knowing how many interfaces there may be, there could be 10, or there might be 200, what is the best way to limit a loop function after that I gave the following commands?

  Set _vrf_int [exec show ip vrf interface]
  Set _array_vrf_int [split $_vrf_int '\n']

  set $i 0

  then {$i< 200}="">
  RegExp {([A-Z]+[a-z]+[0-9]+). *} [lindex $_array_vrf_int $i] _complete_string _int
  Inc. $i 1

  }

  Not 100% sure that the syntax is correct, sorry.  If I don't have that 10 interfaces so it won't be necessary to issue this loop 200 times to "$_array_vrf_int".  Also wouldn't be great if I went through the 200 interfaces.  Is there a way I can limit this loop based on the number of lines that were captured after the split function?

  2. the value of the regular expression above is output in the var $_int.  Is there a way I can output the regular expression in a table? a ' :-

  RegExp {([A-Z]+[a-z]+[0-9]+). *} [lindex $_array_vrf_int $i] _complete_string [lindex $ $i _int]

  Syntax is certainly not correct, but I guess there could be a way to do this.  Any thoughts?

  3. I did some comparisons on an outing to see if an access list is present on an interface.  I can get a regexp to pull back the name of the access on a given interface list, but if there are any access-list to an if statement on anything?

  Set _acl_name 0

  RegExp {. * ip access-group (. *) in} $_running_int _complete_string _acl_name

  If {$_acl_name! = 0} {puts ' there is an access-list on $_int "} else {puts ' there is no acl on _int $ :-("} "}

  In the above output I'm defining the value of ' $_acl_name ' to zero so that I can compare it to the fi statement.  This seems to be a newbie to shit how do however.  Is it a kind of generic I put in place of the '0' to match an empty variable. has ' {null}.

  4 I'm sorry last question.  I also reset the variable {null} using a similar wildcard.  Once again I can reset the variable to 0, but it seems just that I do not understand that the syntax well enough and it is without doubt a better method.

  5. I have read several tutorials that cover a lot of bases.  Is there a good reference that anyone can suggest so I don't waste your time with these silly questions?  I'm afraid that the scripts I've studied on this forum are always way above my head.

  Thanks in advance

  Alex

  Assume that the limit of the loop.  Which will never end well.  Instead, use a foreach loop to iterate over the number of lines in the output:

  set vrf_int [exec "show ip vrf interface"]
  foreach line [split $vrf_int "\n"] {
  
        if { [regexp {([A-Za-z0-9]+).*} $line -> int_name] } {
  puts "Interface name is $int_name"
  }
  }
  

  In addition, do not use the variables that start with "_".  Those that are reserved for the Cisco or overall use.  In addition, 'exec' is a single command tclsh.  If you use the EEM Tcl, you will need to interact with the CLI library.  You can watch our best practices guide at https://supportforums.cisco.com/docs/DOC-12757 for some tips and tricks with the use of EEM.

  You can use - all and--inline for regexp all return in a list.  However, given the idea of the loop above, you can also use lappend to each pass:

  set intlst [regexp -all -inline {([A-Za-z0-9]+).*} $output]

  
  set vrf_int [exec "show ip vrf interface"]
  set intlst [list]
  foreach line [split $vrf_int "\n"] {
  
        if { [regexp {([A-Za-z0-9]+).*} $line -> int_name] } {
  lappend intlst $int_name
  }
  }
  
  
  
  You can use "info exist" or simply to check the result of your regexp command to see if a match took place.  See the example above the latter.
  regexp {.*ip access-group (.*) in} $_running_int _complete_string _acl_name
  if {[info exists $_acl_name]} {puts "there is a access-list on $_int"} else {puts "there's no acl on $_int :-("}
  
  You can 'reset' a variable by using the command 'deactivated '.
  One of the best general Tcl references is the "book of the pen:
  
  http://www.Amazon.com/practical-programming-Tcl-4th-Edition/DP/0130385603/ref=sr_1_2?ie=UTF8&QID=1333817448&SR=8-2
  		   

• create table physical use of select in the repository

  Hi gurus,
  
  We can create physical table in OBIEE 11.1.1.6 repository with stored procedure and select?
  How is the right syntax?
  
  Thank you very much
  
  JOE

  Hello

  Yes. just select and put it under layers of physics
  for example,.
  Select field1, field2. field_n
  tables
  UNION
  Select field1, field2. field_n
  tables;

  http://gerardnico.com/wiki/dat/OBIEE/opaque_view
  http://www.clearpeaks.com/blog/Oracle-BI-EE-11gusing-select_physical-in-OBIEE-11g
  http://allaboutobiee.blogspot.com/2012/05/OBIEE-11g-deployundeploy-view-in.html

  Thank you
  Deva

• Problem of ball when creating tables and blocks of text in InDesign CS5

  Every time I have create a new text frame or a table in InDesign CS5 and paste information, the first row in the table or several lines of text out with chips. I don't know that it's a style at some point, I created and am now unsure how to remove or setting. I would like the new blocks of text and tables do not include by default when imported or pasted chips. Any thoughts? Thank you!

  Default values for the text in the current document are made with no selected text. Disable the chips and they should stay off (but check styles, also, you have perhaps accidentally set a style bulleted as the default and you must change the default style instead). If this is the case in all files, you must do with nothing open to reset the default for all new documents (existing files, must unfortunately be set one at a time).

• table and using them the command

  Hey hope someone can help me stuck win.

  I have this code

  -Chars_Targets_Arrays-.

  targets.push ("level1_Frame");

  targets.push ("level2_Frame");

  targets.push ("level3_Frame");

  targets.push ("level4_Frame");

  targets.push ("level5_Frame");

  targets.push ("level6_Frame");

  targets.push ("level7_Frame");

  targets.push ("level8_Frame");

  Char.push (ZIM);

  Char.push (LAL);

  Char.push (ODE);

  Char.push (jiji);

  Char.push (Dinky);

  Char.push (OLI);

  Char.push (kami);

  Char.push (ALF);

  -Hit_Test_Fuctions-.

  stage.addEventListener (MouseEvent.MOUSE_MOVE, charMove);

  function charMove(evt:MouseEvent)

  {

  addEventListener (Event.ENTER_FRAME, charCollision);

  }

  function charCollision(event:Event)

  {

  for (var i: uint = 0; i < targets.length - 1; i ++)

  {

  if (char [i] .hitTestObject (cursor))

  {

  char.splice (i, 1);

  trace (targets [i])

  targets.splice (i, 1)

  }

  }

  return;

  }

  wut im trying to achieve is to have the first test of positioning to the top of the first target, then target second second test shot and so on, no matter which tank was hit tested first.

  How can I achieve this?

  THX pavel

  You probably have a problem with having this still active ENTER_FRAME listener.  You need to do whenever it fires its function so that nothing else can trigger to play off.  Also, my first bit of the code should not have the code target.splice in it... I guess that I got confused between the two approaches.

  If you return to the frame that has all this code that you started with, anything remove the tables of Ant is meaningless because every return to that frame adds back in the end of what is already there, so the berries grow rather than reduce.

  What you should probably do is simply things until you get their functioning as desired.  Just have one or two characters and targets and logically manage what you are trying to accomplish at each stage of the treatment.  If these signs are present when you switch to other images, then you must disable the ENTER_FRAME listener until the return of this framework.

• How to create tables for use in php/SQL Web site

  Sorry to ask the fundamental question because I am known.

  I built a site dw to registration of several products. I was following DW, the Missing Manual book tutorials. The tutorial provides data downloadable tabels in a folder with the extension .sql. I can't find anywhere a statement that the way in which the .sql file is created.

  Second question: if it can be created in Access 2007, please tell me how.

  Thank you very much.

  Try reading the following article for some tips. http://dev.mysql.com/tech-resources/articles/intro-to-normalization.html. Life becomes much easier when you understand the basic principles of standardization.

• create the back-end database and use forms to enter data

  Good day "" I am new to Oracle. I need to create a database backend from scratch and use the (scoring) forms to enter data.
  I downloaded Oracle forms 10 g and also Oracle 10g Express edition.
  Pls help me get started with the creation of database later can I specify the tables and use them to store the data, which came...
  Thank you...

  In general...

  > Create table for each separate feedback

  Probably wouldn't be ideal, but it would depend on the intent underlying the system under development. Using the RDBMS, with tables of related data, the layout and design of the right table (entity) is crucial.

  After relations are compries, and its checked the layout of schema (the database user (s), table) welcomes the objective underlying the system, index, table creation/loading, functions or procedures, tests, etc the boring tasks begin - and that's on the place where the fun part ceases ;)

• request to retrieve the value of the column and use in the other rows of the table

  Hi all

  I have a table where I maintain pairs name / value of a particular job.  Now, I would like to see some of the values of the rows passed to other rows in a table for example

  create job_name_value

  (

  VARCHAR2 (100) job_name,.

  name varchar2 (100),

  value varchar2 (100)

  );

  job_name	name	value
  TRGJOB	% FPATH	/ USR/LOCAL/TRGJOB
  TRGJOB	% FDATE	CALDATE + 1
  TRGJOB	$FNAME1%	%FPATH.mywatchfile1.%FDATE
  TRGJOB	FNAME2%	%FPATH.mywathcfile2.%FDATE
  TRGJOB	% FNAME3	%FPATH.mywatchfile3.%FDATE

  can we write a sql query to produce output as below the objective is to use the value of fdate and fpath in the remaining lines. If there is no fdate and fpath then value should return such what or we need to use the stored procedure to achieve

  / usr/local/trgjob/mywatchfile1. CALDATE + 1

  / usr/local/trgjob/mywatchfile2. CALDATE + 1

  / usr/local/trgjob/mywatchfile3. CALDATE + 1

  Hello

  Since it cannot be '% FDATTE' or '% FPATH' (or both) then you need to replace each of them separately.  If the other does not, there 'replacement' will do nothing, but this will not affect the result of the other.

  Here's a way to do it:

  SELECT REPLACE (REPLACE (n.value

  '% FPATH.'

  p.value | '/'

  )

  , '% FDATE '.

  d.value

  ) AS output_value

  OF job_name_value n

  LEFT OUTER JOIN job_name_value p ON p.name = '% f '.

  LEFT OUTER JOIN job_name_value d ON p.name = '% FDATE '.

  WHERE n.name AS '\%FNAME%' ESCAPE ' \'

  ;

  I hope that answers your question.

  If this isn't the case, please post a small example of data (CREATE TABLE and only relevant columns, INSERT statements) for all of the tables involved and also publish outcomes from these data.

  Report when the above query is to give erroneous results and explain, using specific examples, how to get the correct results of data provided in these places.  If you change the query at all, your postal code.

  Always say what version of Oracle you are using (for example, 11.2.0.2.0).

  See the FAQ forum: https://forums.oracle.com/message/9362002#9362002

• can we find unused tables and markings using OEM 12 c

  Hello
  
  I use OEM 12 c, databases are all about 11.2.0.3 and need to find if I can find many empty tables and markings unused acorss our env using OEM 12 c
  DBA create tables and indexes intended to test dummy and then they forget to delete these objects that are not been used for a long time.
  can I use a time regarding since when they are not being used and if they are empty using OEM 12 c.
  
  Thank you

  Don't know if EM can be used for this but you can use the audit to see if tables/indexes are used. See http://docs.oracle.com/cd/E11882_01/server.112/e26088/statements_4007.htm#i2116021

  Just to know if indexes are used, you can use ALTER INDEX USE of SURVEILLANCE;
  For more information, see http://www.oracle-base.com/articles/10g/index-monitoring.php

  Eric

• User Manager to create and use "projects".

  I scanned by the doc and videos, but don't know how to activate a Manager create "projects" and use only "Scheduled" technique

  Any suggestion?

  This is done with the permissions on the roll, in that the Manager will be

  

  Delete the ones you don't want to give them