Creating the folder on the Complutense University of MADRID using the schema of the SCO

Similar Questions

• Create reports on the Complutense University of MADRID

  Hi, I have a question to create reports in content WebCenter. I see in WebCenter content: Records that some reports in the search results. I used URM adapter to integrate the University Complutense of MADRID and URM, but the same option create reports is not display in search results Complutense University of MADRID. The question is, is it possible to create reports on the AAU that I in URM?

  Like this: https://blogs.oracle.com/kyle/entry/creating_custom_report_templates_with

  Hello

  I used URM adapter to integrate the University Complutense of MADRID and URM, but the same option create reports is not display in search results Complutense University of MADRID.

  Are you that referring on the server of the University Complutense of Madrid which has the card activated the reports option does not appear?

  I think that the report templates are not installed / released into the system, it is the most common reason for the option to not appear. Try the steps here.

  Go to folders-> configure--> installation check list, and then click default installation of models (even though it says ok/made) and then check out. So again, which does not contain the Menu item, go through the following steps

  Try these steps;

  -----------------------------

  1. review the following documentation: Release Notes Oracle® Fusion Middleware 11 g Release 1 (11.1.1) for Linux x 86-64. Here is the link:

  http://docs.oracle.com/cd/E23943_01/doc.1111/e14770/ucm.htm#ASRLA4867. http://docs.Oracle.com/CD/E23943_01/doc.1111/e14770/UCM.htm#ASRLA4867

  2. navigate in the section document 38.1.20 manual addition of xdoruntime.ear library of records management.

  3. to consider and implement the steps described in section above.

  4. confirm that the report templates are released by checking the queue of work in PROGRESS. If report models are stuck in WIP due the State GENWWW, please fix the problem with the infectious rhinotraecheitis BOVINE/indexer and resubmit the report templates.

  5. new test problem.

• How to re-create the database from the Complutense University of MADRID

  «I was able to change the connection DB from one to the other by changing the settings through the ' system properties '.» However, there are a few objects (tables) database created during installation of the Complutense University of MADRID. is there anyway that I can go to the new database and database get UCM objects re-created without re-installation of the UCM? It seems some sql scripts in the database directory, but I don't know how to operate, the order and setting are not clear for me.
  
  Thank you

  Hello

  One thing you can do to recreate the default tables and columns is to run the script all.sql on the DB that is specific for your db. If you want to just recreate a replica of the image then extract the ddl from your current database instructions and put it in a sql script that run directly on the another instance of db. In this case make sure you change instance specifc details in the extracted ddl script and replace with the instance details latest as the table space name, the user name will execute it and like wise.

  Another way would be to use archiver to create the batch file export for tables and then imported to the target instance. The way out for this is to go to Archiver Applet - create new Archive - Export - Tables and here and include any tables that are there in the content server.

  Hope this helps

  Thank you
  Srinath

• WebService custom at the Complutense University of MADRID

  Hello world

  Can anyone confirm if a web service at the Complutense University of MADRID is created the same way as creating an IdcService custom.

  To experiment, I generated the WSDL file for my personalized service, but I can't find any entry and exit of the metadata in the WSDL file.

  I'm it's incorrect, generating or y at - it another way to create a webservice in UCM or am I supposed to manually change my WSDL?

  This is what looks like the element

  < s:element name = "getTwoMetadata" >

  < s:complexType >

  < s:sequence >

  < s:element minOccurs = "0" maxOccurs = "1" name = "extraProps" type = "s0:IdcPropertyList" / >

  < / s:sequence >

  < / s:complexType >

  < / s:element >

  In fact, it takes in 3 metadata, but does not show here.

  Thanks in advance

  Hi Valerie,.

  So custom WSDL can be created the same way as we do for STANDARD services. I assume that you have added the relevant parameters of the demand for this service and then run WSDL generates. If not, then try and communicate the results.

  Thank you

  Srinath

• OAM 11gR2PS2 - no authenticated access to public Documents at the Complutense University of MADRID

  Hi all

  We had a requirement to one of our clients, in which the documents who have received the public's access to the Complutense University of MADRID should not be challenged for authentication.

  Examples of URLS that are not in dispute when you use the managed for UCM server port (16200)

  http://xxx.com:16200/cs/idcplg? IdcService = GET_FILE & dID = 1445 & dDocName = DEV_COMPLOGO_31364 & allowInterrupt = 1

  http:// xxx.com : 16200/cs/groups/public/documents/digitalmedia/b2dv/xzmx/~edisp/dev_complogo_31364.jpg

  This GS search page ready must also open without authentication.

  http:// xxx.com : 16200/cs/idcplg? IdcService = GET_DOC_PAGE

  After the configuration of SSO and protection/CS, when I go above URL using the port of OSH only the second opens without challenge me the name of user and password.

  Knowing that I can protect/unprotect URL patterns, I was wondering if this is possible using OAM at all.

  The document is assigned to a group of public safety at the Complutense University of MADRID.

  http://xxx.com:16200/cs/idcplg? IdcService = GET_FILE & dID = 1445 & dDocName = DEV_COMPLOGO_31364 & allowInterrupt = 1

  By looking at the URL, would you be able to identity if this url is to document to the Group of public safety? All of the query parameter would help you to differentiate the document in the public safety group

  If the answer is NO then you will not be able to create policies OAM who could remove the URL

  If the answer is YES you can then use 'Query parameter' section resource OAM to remove the specific URL

  hope this helps

  Concerning

  Aakash

• Search by program go to the Complutense University of MADRID

  Hello

  I have a requirement to search for a file using RIDC, Complutense University of MADRID

  I am the scene below the steps.

  public UCMFile getDocumentByFileName (String fileName, String folderPath, user String) {}

  StringBuilder builder = new StringBuilder();

  Builder.Append ("xCollectionID = '202819957016000405'" + "< AND > dOriginalName = '" + fileName + "'");

  String query = builder.toString ();

  List of files < UCMFile > = this.getDocumentsByQuery (user, query);

  }

  private list < UCMFile > getDocumentsByQuery (String user, String query) {}

  String methodName = Thread.currentThread () .getStackTrace () [1] .getMethodName ();

  If (_logger.isLoggable (Level.INFO)) {}

  _logger.info ("class: [" + This.GetClass + "] [" + methodName + "]" + "entry: user:" + user);

  }

  try {}

  init (User);

  DataBinder dataBinder = myIdcClient.createBinder ();

  dataBinder.putLocal ("IdcService", "GET_SEARCH_RESULTS");

  dataBinder.putLocal ("QueryText", query);

  ServiceResponse response;

  DataBinder serverBinder = null;

  List files from list < UCMFile > = new ArrayList < UCMFile > ();

  response = myIdcClient.sendRequest (userContext, dataBinder);

  serverBinder = response.getResponseAsBinder ();

  ResultSet DataResultSet = serverBinder.getResultSet ("SearchResults");

  System.out.println ("size-" + ResultSet.getRows (). Size());

  int index = 0;

  If (resultSet! = null) {}

  UCMFile ucmFile = null;

  {for (DataObject dataObject1: {resultSet.getRows ())}

  If (index > = 5)

  break;

  String docName = dataObject1.get ("dDocName");

  ucmFile = new UCMFile();

  ucmFile.setDocumentId (dataObject1.get ("dID"));

  ucmFile.setContentID (docName);

  ucmFile.setDatasource ("#dDocName UCM:" +)

  dataObject1.get ("dDocName"));

  ucmFile.setDescription (dataObject1.get ("xComments"));

  ucmFile.setUrl (url);

  ucmFile.setTitle (dataObject1.get ("dDocTitle"));

  ucmFile.setUploadDate (dataObject1.get ("dInDate"));

  ucmFile.setAuthor (dataObject1.get ("dDocAuthor"));

  ucmFile.setExt (dataObject1.get ("venture"));

  fileList.add (ucmFile);

  index ++;

  }

  }

  If (_logger.isLoggable (Level.INFO)) {}

  _logger.info ("class: [" + This.GetClass + "] [" + methodName + "]" + "Exiting: list of files:" + fileList);

  }

  Return to the file list;

  } catch (Exception e) {}

  DiagnosticUtil.printStackTrace (e, _logger, this. GetClass, methodName);

  throw the new locale ("an unexpected error occurred while getting recently downloaded documents. Contact the system administrator. \n details: «+»

  e.getCause ());

  throw the new locale ("an unexpected error occurred during execution of the UCM query". Contact the system administrator. \n details: "+ e.getMessage ());

  }

  }

  Without dOriginalName his works fine but with dOriginalName I get following error

  Services/3 09.03 01:37:01.813 IdcServer-20882! csUserEventMessage, ohsadmin, CIS! $ intradoc.common.ServiceException:! csSearchUnableToReturnResults

  Services/3 09.03 20882-IdcServer 01:37:01.813 * ScriptStack GET_SEARCH_RESULTS

  Services/3 09.03 01:37:01.813 3:getSearchResults IdcServer-20882, * no captured values *.

  Services/3 09.03 01:37:01.813 IdcServer-20882 to intradoc.server.SearchManager.retrieveSearchInfoAsBinder(SearchManager.java:295)

  Services/3 09.03 01:37:01.813 IdcServer-20882 to intradoc.server.SearchService.retrieveSearchInfo(SearchService.java:1902)

  Services/3 09.03 01:37:01.813 IdcServer-20882 to intradoc.server.SearchService.doLocalSearch(SearchService.java:1381)

  Services/3 09.03 01:37:01.813 IdcServer-20882 to intradoc.server.SearchService.getSearchResults(SearchService.java:674)

  Services/3 09.03 IdcServer-20882 01:37:01.813 at sun.reflect.GeneratedMethodAccessor279.invoke (unknown Source)

  Services/3 09.03 01:37:01.813 IdcServer-20882 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

  Services/3 09.03 01:37:01.813 IdcServer-20882 to java.lang.reflect.Method.invoke(Method.java:597)

  Services/3 09.03 01:37:01.813 IdcServer-20882 to intradoc.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:86)

  Services/3 09.03 01:37:01.813 IdcServer-20882 to intradoc.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:310)

  Services/3 09.03 01:37:01.813 IdcServer-20882 to intradoc.common.ClassHelperUtils.executeMethod(ClassHelperUtils.java:295)

  Services/3 09.03 01:37:01.813 IdcServer-20882 to intradoc.server.Service.doCodeEx(Service.java:620)

  Services/3 09.03 01:37:01.813 IdcServer-20882 to intradoc.server.Service.doCode(Service.java:575)

  Services/3 09.03 01:37:01.813 IdcServer-20882 to intradoc.server.ServiceRequestImplementor.doAction(ServiceRequestImplementor.java:1643)

  Services/3 09.03 01:37:01.813 IdcServer-20882 to intradoc.server.Service.doAction(Service.java:547)

  Services/3 09.03 01:37:01.813 IdcServer-20882 to intradoc.server.ServiceRequestImplementor.doActions(ServiceRequestImplementor.java:1458)

  Services/3 09.03 01:37:01.813 IdcServer-20882 to intradoc.server.Service.doActions(Service.java:542)

  Services/3 09.03 01:37:01.813 IdcServer-20882 to intradoc.server.ServiceRequestImplementor.executeActions(ServiceRequestImplementor.java:1391)

  Services/3 09.03 01:37:01.813 IdcServer-20882 to intradoc.server.Service.executeActions(Service.java:528)

  Services/3 09.03 01:37:01.813 IdcServer-20882 to intradoc.server.ServiceRequestImplementor.doRequest(ServiceRequestImplementor.java:737)

  Services/3 09.03 01:37:01.813 IdcServer-20882 to intradoc.server.Service.doRequest(Service.java:1956)

  Services/3 09.03 01:37:01.813 IdcServer-20882 to intradoc.server.ServiceManager.processCommand(ServiceManager.java:437)

  Services/3 09.03 01:37:01.813 IdcServer-20882 to intradoc.server.IdcServerThread.processRequest(IdcServerThread.java:265)

  Services/3 09.03 01:37:01.813 IdcServer-20882 to intradoc.server.IdcServerThread.run(IdcServerThread.java:160)

  Services/3 09.03 01:37:01.813 IdcServer-20882 to weblogic.work.SelfTuningWorkManagerImpl$ WorkAdapterImpl.run (SelfTuningWorkManagerImpl.java:545)

  Services/3 09.03 01:37:01.813 IdcServer-20882 to weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)

  Services/3 09.03 01:37:01.813 IdcServer-20882 to weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

  > requestaudit/6 09.03 01:37:01.984 GET_SEARCH_RESULTS IdcServer-20882 [dUser = ohsadmin] [QueryText = (xCollectionID = 202819957016000405 AND dOriginalName = Details711.txt Testing)] [StatusCode =-1] [StatusMessage = failed to retrieve search results. Error occurred during processing. Unable to return results.] [IsJava = 1] 0.7068729996681213 (dry)

  > requestaudit/6 09.03 01:38:00.001 Audit Request Monitor! csMonitorTotalRequests, 10, 1, 0.08333263546228409, 0.8702999949455261, 1

  Looks like I can't search based on dOriginalName. I need to check if there is that a document already exists with the same file name in a folder.

  How should I reach it?

  Thank you

  Pauline.

  Hello

  In my view, the format of the query string is false.

  The correct format would be-

  dOriginalName ' *'

  
  

  
  

  Here equal (=) will not work. In my case code works very well.

  
  

  Check with this format and let me know the results.
  

  
  

  Kind regards

  Hoque

• Question on the alias in the Complutense University of MADRID

  Hello

  I am currently in the process of brainstorming of ideas that would help streamline the e-mail notifications by using the cmdlet workflow management and wonder if there are best practices following help put me in the process.

  In essence, I want to do, it's associate a security group at the University Complutense of MADRID to groups of users by using aliases and tokens. My implementation involved naming aliases similar to security groups and have a token to decide which group to choose. It worked well, but I got to thinking that there may be a way to streamline this process, so when a user creates a new field in LDAP, an alias can be created that is associated with members of the cname. Is it possible to embed aliases in Complutense University of MADRID with members of a specific LDAP cname? Are there other processes that can do what I'm doing?

  Thank you for your time.

  Hello

  Of course, it is possible, but with some customization. There are two options for you.

  Option 1: Conduit in the Complutense University of MADRID

  1. do you have a personalized search LDAP for users who belong to a cname using JNDI calls (regular service)

  2 look for this information in a result set and use it as input for the creation of the alias of the Complutense University of MADRID with this set of users

  Note: Users should be connected to the AAU at least once to have his updated profile cached in the Complutense University of MADRID

  Option 2: Led outdoor AAU

  1. do you have a program of independent Java at the request of the LDAP query for the new groups/areas created (new JNDI)

  2 do you calls of CRMI to AAU to create aliases with the users information from LDAP

  I hope this helps.

  Kind regards

  -Anand

• creation of custom in the Complutense University of MADRID component

  Hi all

  I'm a newbie in the Complutense University of MADRID. I need to created a component custom that will insert and update the record in the table of the Complutense University of MADRID. How to do this? I can't find any example on google.

  its urgent assistance please.

  Check the samples component how-to for Oracle UCM 11g | Bex Huff

  There is a single component, DataAccess, that shows exactly how.

• Mapping of the external LDAP user with the role of the Complutense University of MADRID

  Hello WebCenter content masters,
  
  I'm having trouble mapping a group LDAP to the role of the Complutense University of MADRID.
  Let me explain the situation.
  
  I have an external LDAP (Apache DS) with two groups (groupofuniquenames), 'Administrators' and 'Test' and two users 'ldap_admin' and 'ldap_user '. ldap_admin is a uniqueMember administrators and the ldap_test a test uniqueMember.
  
  At the University Complutense of MADRID, I created a custom role 'Test' with privileges "RWD" group 'Public '.
  
  I guess that the external LDAP has been configured successfully as an LDAP authenticator provider - myrealm settings tab, since I can see groups and external LDAP users, and they can connect the DCU with their user id and password.
  
  However, ldap_user is unable to perform the check, and on their profile page, the role is "invited, authenticated."
  And when I pass ldap_user in the test group to the Administrators group, the role is then "invited, authenticated, admin, sysmanager, refineryadmin, rmaadmin, pcmadmin, ermadmin.
  It seems that the Administrators group is mapped correctly, but not the group test.
  
  I try to apply the advice given in these two threads:
  External LDAP user has only priviledge research at the Complutense University of MADRID
  Unable to map external users to roles in content Webcenter 11 g
  
  I have created a 'externalLdapMap' identification card, completed the provider.hda file and put the map "Test, Test". I also tried with "Test, contributor" that I was not sure about the first mapping.
  Whatever it is, after restarting the server of the University Complutense of MADRID, I'm still not able to grant the privilege of writing for a user to the Administrators group.
  
  I missed something in the process?
  Thank you for your attention and of course any help would be greatly appreciated.
  L.

  Hello

  I think that you have enabled the LDAP authenticator credits and that this error will go up.

  You must create an OpenLDAPAuthenticator and do the same settings with flag set up and then test the scenario.

  Thank you
  Srinath

• user autherization at the Complutense University of MADRID.

  Hi all
  
  Please, help me to understand next.
  -> 11 g authentication is carried out thorugh Admin Server.
  -> When we configure a new provider and reorganization of albums, autherization user takes plase from there only.
  -> we need create a ldapProvider at the University Complutense of MADRID after you have created the new Admin Server provider.
  -> what is the purpose of jpsUserProvider in above senerio.
  -> for built-in ldap users mapped to the role/account r group.
  -> should we create role account with the same name at the University Complutense of MADRID also?
  
  These are the fundamental issues that I'm not able to understand in the oracle documentation.
  
  any help is much appreciated. (Please provide a few entries, I hv been through security oracle docs section in the Administrator's guide)
  Thank you
  -Yves

  Hello

  --> 11 g authentication is performed Server Admin thorugh.

  WLS is the central Security Manager where the authenticator of security provider like authenticator by default (for Embedded LDAP), OIDAUthenticator (for the OID), ADAUthenticator (for AD) etc. are created when any external identity store must be used for the AAU.

  --> When configure us a new provider and reorganize top autherization user takes plase from there only.

  That is right. It is one of the steps that must be accomplished where configure WLS security providers. With PS5, we can have several providers authentication and using her virtualize indicator = true in the security xml file, users can be authenticated from these multiple sources.

  --> do we need to create ldapProvider at the Complutense University of MADRID after you have created the new Admin Server provider.

  No.. It is supported to WLS.

  --> What is use of jpsUserProvider in high senerio.

  Read / available to users at the AAU of WLS.

  --> for ldap integrated users mapped to the role/account r group.

  For all groups of cases LDAP / AD are mapped as the roles at the Complutense University of MADRID.

  -> do we need create the role account with the same name in the UCM too?

  No.. You can use the credentials to map the LDAP group / accounts to the roles of the UCM / accounts.

  I hope this helps.

  Thank you
  Srinath

• Using webservices to archive files to the Complutense University of MADRID

  Hi all.
  
  We are trying to perform some tests to the Complutense University of MADRID, but we do not see many examples on this subject.
  That's what we want to do:
  
  We want to use Web services for archiving of files at the Complutense University of MADRID.
  
  How?
  
  1. we will develop a java application
  2 inside of the application, there will be a button that calls the Web service
  3 after the Web service is called, the document should go outside UCM
  
  So far, I only do research. Read the documents on Web services, how they work and what I could find.
  But I can't find an example about this. Someone, please, I could tell where I can find it?
  
  Thanks for your help and your patience.
  
  Fernando

  Just in case someone was looking for a code example, I created one:

              Stub stub = (Stub)client.getPort();
              stub._setProperty(stub.USERNAME_PROPERTY, "weblogic");
              stub._setProperty(stub.PASSWORD_PROPERTY, "welcome1");
  
              IdcPropertyList ipl = null;
              IdcFile primaryFile = new IdcFile();
              File f = new File ("C:/temp/test.doc");
  
              primaryFile.setFileName(f.getName());
              primaryFile.setFileContent(CheckInSoapPortClient.getBytesFromFile(f));
  
              //client.checkInUniversal(dDocName, dDocTitle, dDocType, dDocAuthor, dSecurityGroup, dDocAccount, CustomDocMetaData, primaryFile, alternateFile, extraProps)
              CheckInUniversalResult result = client.checkInUniversal("", "Checked-in via WS call", "Document", "weblogic", "Public", "", ipl, primaryFile, null, null);
  
              System.out.println(result.getStatusInfo().getStatusMessage());
  

  All I needed was the CheckIn.wsdl and JDev (I created a Web Service Proxy, he gave the WSDL file and added in the code above to an auto-generated Java).

• where is Folders_g at the Complutense University of MADRID?

  I am following the Tutorial, http://docs.oracle.com/cd/E23943_01/webcenter.1111/e10273/createconnect.htm#BGBDDHAA
  I encountered an error when connecting to UCM11g of JDev11.1.1.6
  
  It is said, "SEVERE: could not the content list of the folder with the ID = dCollectionID:-1.
  
  someone in the RTO said I activated the "Folders_g" at the Complutense University of MADRID (under Administration - Admin Server - Component Manager). but I can not find "FrameworkFolders". and enable "FrameworkFolders" doesnot work for me.
  where can I find the Folders_g? Thank you.

  -First, disable the framework files and restart the managed server. Framework and Foldersg files cannot be installed at the same time. _
  -On the page where you have enabled frame files, upwards (in the body of the page), it has a link to "Manager of advanced components." Click on this link.
  -Scroll down to the section "disabled components."
  -Select "Folders_g" and press the button "Activate" in the list of the disabled components.
  -Restart the managed server.

• Installation of the Complutense University of MADRID - need your help very badly - please help

  omg!!!!!!!!!!!!!! I had a moment difficult installing oracle UCM in my system...
  I managed to get the homepage but wen I click on a link, it says
  
  "The/idc3/idcplg requested URL was not found on this server."
  
  My induction is that iam not configure my cgi properly Setup in apache...
  
  Here are the necessary info:
  
  OS: WIndows 7
  Web server: apache 2.2
  
  Please find my file config apache below: (httd.conf)
  
  #
  # This is the main Apache HTTP server configuration file. It contains the
  configuration directives # that give the server its instructions.
  # See < URL: http://httpd.apache.org/docs/2.2 > for more information.
  # See especially
  # < URL: http://httpd.apache.org/docs/2.2/mod/directives.html >
  # for an analysis of each configuration directive.
  #
  # Do NOT simply read the instructions here without understanding
  # what they do. They are there only as advice or reminders. If you do not know
  # consult the online documentation. You have been warned.
  #
  # Configuration and logfile names: If the file names that you specify for a lot
  number of files in server control begin by "/" (or "drive: / 'for Win32 '), the
  # server uses this explicit path. If the file names do not start
  # with "/", the value of ServerRoot directive is preceded by - so "logs/foo.log.
  # with ServerRoot value "(x 86) C:/Program Files/Apache Software Foundation/Apache2.» 2' will be interpreted by the
  # Server as "(x 86) C:/Program Files/Apache Software Foundation/Apache2.2/logs/foo.log".
  #
  # NOTE: Where file names are specified, you must use forward slashes
  # instead of backslashes (e.g. "c:/apache" instead of "c:\apache").
  # If a drive letter is omitted, the drive on which httpd.exe is located
  # will be used by default. It is recommended that you always provide
  # an explicit drive letter in absolute paths to avoid confusion.
  
  #
  # ServerRoot: The top of the directory under which the server tree
  # configuration, error and the log files are kept.
  #
  # Do not add a bar slash at the end of the directory path. If you point
  # ServerRoot to non-local disk, remember to point the LockFile directive
  # to a local disk. If you want to share the same multiple ServerRoot
  demons of # httpd, you will need to change at least the LockFile and PidFile.
  #
  ServerRoot "C:/Program Files (x 86) /Apache Software Foundation/Apache2.» 2. "
  
  #
  # Listen: Allows you to bind Apache to specific IP addresses and/or
  ports #, instead of the default value. See also the < VirtualHost >
  directive #.
  #
  # Change this to listen on specific IP addresses below for
  # prevent Apache glomming on all related IP addresses.
  #
  #Listen 12.34.56.78:80
  Listen to 90
  
  #
  # Dynamic Shared Object (DSO) Support
  #
  # To be able to use the features of a module that was built as a DSO you
  # duty place corresponding 'LoadModule' lines at this location until the
  # the directives that it contained are actually available before their use.
  # Modules statically compiled (those listed by "httpd-l") is not necessary
  # to be responsible here.
  #
  # Example:
  # LoadModule foo_module modules/mod_foo.so
  #
  LoadModule modules/mod_actions.so actions_module
  LoadModule alias_module modules/mod_alias.so
  LoadModule modules/mod_asis.so asis_module
  LoadModule auth_basic_module modules/mod_auth_basic.so
  #LoadModule auth_digest_module modules/mod_auth_digest.so
  #LoadModule authn_alias_module modules/mod_authn_alias.so
  #LoadModule authn_anon_module modules/mod_authn_anon.so
  #LoadModule authn_dbd_module modules/mod_authn_dbd.so
  #LoadModule authn_dbm_module modules/mod_authn_dbm.so
  LoadModule modules/mod_authn_default.so authn_default_module
  LoadModule authn_file_module modules/mod_authn_file.so
  #LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
  #LoadModule authz_dbm_module modules/mod_authz_dbm.so
  LoadModule modules/mod_authz_default.so authz_default_module
  LoadModule modules/mod_authz_groupfile.so authz_groupfile_module
  LoadModule modules/mod_authz_host.so authz_host_module
  #LoadModule authz_owner_module modules/mod_authz_owner.so
  LoadModule modules/mod_authz_user.so authz_user_module
  LoadModule autoindex_module modules/mod_autoindex.so
  #LoadModule cache_module modules/mod_cache.so
  #LoadModule cern_meta_module modules/mod_cern_meta.so
  LoadModule modules/mod_cgi.so cgi_module
  #LoadModule charset_lite_module modules/mod_charset_lite.so
  #LoadModule dav_module modules/mod_dav.so
  #LoadModule dav_fs_module modules/mod_dav_fs.so
  #LoadModule dav_lock_module modules/mod_dav_lock.so
  #LoadModule dbd_module modules/mod_dbd.so
  Modules/mod_deflate.so deflate_module #LoadModule
  LoadModule modules/mod_dir.so dir_module
  #LoadModule disk_cache_module modules/mod_disk_cache.so
  #LoadModule dumpio_module modules/mod_dumpio.so
  LoadModule env_module modules/mod_env.so
  #LoadModule modules/mod_expires.so expires_module
  #LoadModule ext_filter_module modules/mod_ext_filter.so
  #LoadModule file_cache_module modules/mod_file_cache.so
  #LoadModule filter_module modules/mod_filter.so
  #LoadModule modules/mod_headers.so headers_module
  #LoadModule ident_module modules/mod_ident.so
  #LoadModule imagemap_module modules/mod_imagemap.so
  LoadModule modules/mod_include.so include_module
  #LoadModule info_module modules/mod_info.so
  LoadModule modules/mod_isapi.so isapi_module
  #LoadModule ldap_module modules/mod_ldap.so
  #LoadModule logio_module modules/mod_logio.so
  LoadModule log_config_module modules/mod_log_config.so
  #LoadModule log_forensic_module modules/mod_log_forensic.so
  #LoadModule mem_cache_module modules/mod_mem_cache.so
  LoadModule mime_module modules/mod_mime.so
  #LoadModule mime_magic_module modules/mod_mime_magic.so
  LoadModule negotiation_module modules/mod_negotiation.so
  #LoadModule modules/mod_proxy.so proxy_module
  #LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
  Proxy_balancer_module modules/mod_proxy_balancer.so #LoadModule
  Modules/mod_proxy_connect.so proxy_connect_module #LoadModule
  Proxy_ftp_module modules/mod_proxy_ftp.so #LoadModule
  Modules/mod_proxy_http.so proxy_http_module #LoadModule
  #LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
  #LoadModule reqtimeout_module modules/mod_reqtimeout.so
  #LoadModule rewrite_module modules/mod_rewrite.so
  LoadModule setenvif_module modules/mod_setenvif.so
  Modules/mod_speling.so speling_module #LoadModule
  Modules/mod_ssl.so ssl_module #LoadModule
  #LoadModule modules/mod_status.so status_module
  #LoadModule substitute_module modules/mod_substitute.so
  #LoadModule unique_id_module modules/mod_unique_id.so
  #LoadModule userdir_module modules/mod_userdir.so
  #LoadModule usertrack_module modules/mod_usertrack.so
  #LoadModule version_module modules/mod_version.so
  #LoadModule vhost_alias_module modules/mod_vhost_alias.so
  
  < IfModule! mpm_netware_module >
  < IfModule! mpm_winnt_module >
  #
  # If you want httpd to run as a different user or group, you must run
  # httpd as root initially and it will pass.
  #
  # Group / user: the name (or #number) of the user/group to run httpd as.
  # It is generally advisable to create a dedicated and aggregatable for user
  # httpd, as with most system services are running.
  #
  Demon of the user
  Daemon group
  
  < / IfModule >
  < / IfModule >
  
  Server configuration # 'hand '.
  #
  # The directives in this section implement the values used by the 'hand '.
  # Server, which meets all demands that are not managed by a
  definition of # < VirtualHost >. These values also provide defaults for
  # all < VirtualHost > containers you can set later in the file.
  #
  # All these directives may appear inside containers < VirtualHost >,.
  # in which case the value default parameters will be substituted for the
  virtual host of # being defined.
  #
  
  #
  # ServerAdmin: Your address, where problems with the server should be
  # e-mail. This address appears on some generated by the page server, such
  # as error documents. for example [email protected]
  #
  ServerAdmin [email protected]
  
  #
  # ServerName gives the name and the port used by the server to identify itself.
  # This can often be determined automatically, but we recommend that you specify
  # explicitly to avoid problems during startup.
  #
  # If your host doesn't have a registered DNS name, enter its IP address here.
  #
  #ServerName bhuramish - HP.vc.shawcable .net: 80
  
  #
  # DocumentRoot: The directory you are going to use your
  documents #. By default, all requests are taken from this directory, but
  aliases and symlinks # can be used to point to other locations.
  #
  #DocumentRoot "C:/Program Files (x 86) /Apache Software Foundation/Apache2.2/htdocs.
  DocumentRoot "C:/Oracle/ucm/server3/weblayout.
  
  #
  # Each directory that Apache has access can be configured in respect
  # to which services and features are allowed and/or disabled in this
  # Directory (and its subdirectories).
  #
  # Everything first, we configure the 'default' to be a very restrictive of game
  features #.
  #
  < directory / >
  Options FollowSymLinks
  AllowOverride None
  Order deny, allow
  Refuse to all the
  < / Book >
  
  #
  # Note that, from this point forward you must precisely enable
  features special # to be enabled - so if something doesn't work not as
  # you might expect, make sure that you have specifically enabled it
  # below.
  #
  
  #
  # This should be replaced by what you set DocumentRoot.
  #
  # < directory "C:/Program Files (x 86) /Apache Software Foundation/Apache2.2/htdocs" >
  < directory "C:/Oracle/ucm/server3/weblayout" >
  #
  # Possible values for the Options directive are "None", "All."
  # or any combination of:
  # Indexes includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
  #
  # Note that "MultiViews" must be named explicitly -'all Options '.
  # is not give it to you.
  #
  # The Options directive is complex and important. Please see
  # http://httpd.apache.org/docs/2.2/mod/core.html#options
  # For more information.
  #
  Options Indexes FollowSymLinks
  
  #
  # AllowOverride controls what directives may be placed in .htaccess files.
  # It can be 'All', 'None', or any combination of key words:
  # Options FileInfo AuthConfig Limit
  #
  AllowOverride None
  
  #
  # Controls who can get stuff from this server.
  #
  Order allow, deny
  Allow all the
  
  < / Book >
  
  #
  # DirectoryIndex: sets the file Apache will serve if a directory
  # is requested.
  #
  < IfModule /idc3 >
  DirectoryIndex portal.htm
  IdcSecurity idc3
  < / IfModule >
  
  #
  # The following lines prevent the .htaccess and .htpasswd files to be
  # seen by customers of the Web.
  #
  < FilesMatch "^ \.ht" > "".
  Order allow, deny
  Refuse to all the
  Meet all
  < / FilesMatch >
  
  #
  # ErrorLog: The location of the error log file.
  # If you do not specify an ErrorLog directive in a < VirtualHost >
  # container, error messages related to this virtual host will be
  # logged here. If you do define a for a < VirtualHost > error log
  container of #, that host errors will be logged there and not here.
  #
  ErrorLog logs / 'error.log '.
  
  #
  # LogLevel: Control the number of messages in the error_log.
  # Possible values include: debug, info, notice, warn, error, crit,.
  # emerg, alert.
  #
  LogLevel warn
  
  < IfModule log_config_module >
  #
  # The following directives define some nicknames format for use with
  # a directive CustomLog (see below).
  #
  "LogFormat '%%u %t \"%r\ hour' % > s \"%{Referer}i\ %b" \"%{User-Agent}i\" "handset"
  "LogFormat '%%u %t \"%r\ hour' % > s %b "commune
  
  < IfModule logio_module >
  # You must enable mod_logio.c use %I and frequency
  "" LogFormat '%%u %t \"%r\ hour' % > s %b \"%{Referer}i\ "\"%{User-Agent}i\ "%I %o "combinedio
  < / IfModule >
  
  #
  # The location and format of the access (Common Log Format) log file.
  # If you do not have any logfiles access set in a < VirtualHost >
  container of #, they will be saved here. On the other hand, if you the do
  # define per - < VirtualHost > access logfiles, transactions will be
  # logged there and not in this file.
  #
  Common CustomLog "logs/access.log.
  
  #
  # If you prefer a log file of access, agent, and referer information
  # (Combined logfile format) you can use the following directive.
  #
  #CustomLog "logs/access.log' combined
  < / IfModule >
  
  < IfModule alias_module >
  #
  # Redirect: Allows to tell clients the documents used for
  # exist in your server's namespace, but no more. The customer
  # make a new request for the document at its new location.
  # Example:
  # Redirect permanent/foo http://bhuramish-HP.vc.shawcable.net/bar
  
  #
  # Alias: Maps web paths into paths of file system and is used to
  # access content that don't live under the DocumentRoot directive.
  # Example:
  LoadModule IdcApacheAuth C:/Oracle/ucm/server3/shared/os/win32/lib/IdcApache22Auth.dll
  IdcUserDB idc 'C:/Oracle/ucm/server3/data/users/userdb.txt '.
  Alias /idc3 C:/Oracle/ucm/server3/weblayout
  < /idc3 location >
  Order allow, deny
  Allow all the
  DirectoryIndex portal.htm
  IdcSecurity idc3
  < / location >
  #
  # If you include a trailing / on /webpath, then the server will be
  # require that he be present in the URL. It is also likely that
  # duty provide a < Directory > section to allow access to
  # the path to the file system.
  
  #
  # ScriptAlias: This controls which directories contain server scripts.
  # ScriptAliases are essentially the same as assumed names, except that
  # documents in the target directory are treated as applications and
  # executed by the server on demand, rather than as documents sent to the
  client of #. The same regulation on flight "/" applies to the ScriptAlias
  # as for the Alias directives.
  #
  ScriptAlias /idcplg/ "C:/Oracle/ucm/server3/weblayout / '.
  
  < / IfModule >
  
  < IfModule cgid_module >
  #
  # ScriptSock: On threaded servers, refers to the access path to the UNIX
  decision # used to communicate with the CGI mod_cgid daemon.
  #
  Newspapers/cgisock #Scriptsock
  < / IfModule >
  
  #
  # "C:/Program Files (x 86) /Apache Software Foundation/Apache2.2/cgi-bin" should be replaced by everything that your ScriptAlias
  # CGI directory exists, if you have set up.
  #
  < directory "C:\Oracle\ucm\server3\weblayout" >
  AllowOverride None
  None of the options
  Order allow, deny
  Allow all the
  < / Book >
  
  #
  # DefaultType: Server default MIME type used for a document
  # If it cannot establish also as file name extensions.
  # If your server contains mainly text or HTML documents, it is "text/plain".
  # a good value. If your content is binary, such as applications
  # or images, you can use "application/octet-stream" instead of
  # Keep browsers try to view binary files, as if they were
  # text.
  #
  DefaultType text/plain
  
  < IfModule mime_module >
  #
  # TypesConfig points to the file containing the list of mappings from
  # MIME file extension - type.
  #
  TypesConfig conf/mime.types
  
  #
  # AddType allows you to add or replace the MIME configuration
  # the file specified in TypesConfig for specific file types.
  #
  #AddType application/x-gzip .tgz
  #
  # AddEncoding allows you to have certain browsers uncompress
  # information on the fly. Note: Not all browsers support this.
  #
  #AddEncoding x-compress. Z
  #AddEncoding x-gzip .gz .tgz
  #
  # If the AddEncoding directives above are commented out, then you
  # should probably define these extensions to indicate media types:
  #
  AddType application/x-compress. Z
  AddType application/x-gzip .gz .tgz
  
  #
  # AddHandler allows you to map certain "manipulators": file extensions
  # No actions associated with the file type. It can be either integrated into the server
  # or added to the directive of the Action (see below)
  #
  # To use CGI outside of ScriptAlias directories scripts:
  # (You will also need to add "ExecCGI" to the "Options" directive.)
  #
  AddHandler cgi-script .cgi
  
  # For maps of type (negotiated resources):
  #AddHandler type-plan of the var
  
  #
  # Filters allow you to process content before sending it to the client.
  #
  # To parse .shtml for server-side includes (SSI) files:
  # (You will also need to add "Includes" the "Options" directive.)
  #
  #AddType text/html .shtml
  #AddOutputFilter INCLUDES .shtml
  < / IfModule >
  
  #
  # The mod_mime_magic module allows the server to use various boards of the
  content of the file itself to determine its type. The MIMEMagicFile
  # directive tells the module where the definitions of suspicion.
  #
  #MIMEMagicFile conf/magic
  
  #
  # Customizable error responses come in three flavors:
  ((# 1) text 2) local redirects 3) external redirects
  #
  # Examples:
  #Error Document 500 "The server made a boo boo".
  #Error Document 404 Missing.html
  #Error Document 404 "/cgi-bin/missing_handler.pl"
  #Error Document 402 http://bhuramish-HP.VC.shawcable.NET/subscription_info.html
  #
  
  #
  # MaxRanges: Number of channels in a Maximum request before
  # return the resource, or 0 for unlimited
  # Default is to accept 200 lines
  #MaxRanges 0
  
  #
  # EnableMMAP and EnableSendfile: on systems that support.
  projection in memory # or the sendfile syscall is used to deliver
  # files. Usually, this improves the performance of the server, but must
  # turn off when mounted network is served
  # file systems or if support for these functions is also
  # broken on your system.
  #
  #EnableMMAP off
  #EnableSendfile off
  
  # Additional configuration
  #
  # The configuration files in the conf/extra/directory can be
  # included to add additional features or change the default configuration
  # the server, or you can simply copy their content here and change as
  # necessary.
  
  # Server-pool management (MPM specific)
  #Include conf/extra/httpd-mpm.conf
  
  # Multilingual error messages
  #Include conf/extra/httpd-multilang-errordoc.conf
  
  # Entries to the fancy directory
  #Include conf/extra/httpd-autoindex.conf
  
  # Language settings
  #Include conf/extra/httpd-languages.conf
  
  # User directories
  #Include conf/extra/httpd-userdir.conf
  
  # Info in real time on the applications and configuration
  #Include conf/extra/httpd-info.conf
  
  # Virtual hosts
  #Include conf/extra/httpd-vhosts.conf
  
  # Local access to the manual for the Apache HTTP Server
  #Include conf/extra/httpd-manual.conf
  
  # Distributed authoring and versioning (WebDAV)
  #Include conf/extra/httpd-dav.conf
  
  # Various default settings
  #Include conf/extra/httpd-default.conf
  
  # Secure connections (SSL/TLS)
  #Include conf/extra/httpd-ssl.conf
  #
  # Note: The following text should be present to support
  # start without SSL on platforms without equivalent/dev/random
  but # a statically compiled in mod_ssl.
  #
  < IfModule ssl_module >
  SSLRandomSeed startup builtin
  SSLRandomSeed connect builtin
  < / IfModule >
  
  My CONFIG.cfg file:
  
  <? jcharset cfg = "UTF8"? >
  Server #Content System Properties
  IDC_Name = idc3
  IdcProductName = idccs
  SystemLocale = English-United States
  InstanceMenuLabel = idc3
  InstanceDescription = idc3 content server
  SocketHostAddressSecurityFilter = 127.0.0.1
  
  Variable #Database
  IsJdbc = true
  JdbcDriver = net .sourceforge .jtds .jdbc .driver
  JdbcConnectionString = jdbc:jtds:sqlserver://bhuramish-HP:1433 / OracleECM
  JdbcUser = ecm
  JdbcPassword = VZU64a2zvfxn4H/vxFslVk0wdHELfmeJ4z + xMB5g4Rw =
  JdbcPasswordEncoding = Intradoc
  
  Variable #Internet
  HttpServerAddress = bhuramish - HP: 90
  Mail = mail server
  SysAdminAddress=sysadmin@mail
  HttpRelativeWebRoot = / idc3.
  CgiFileName = idcplg
  UseSSL =
  WebProxyAdminServer = true
  
  #General option Variables
  
  Variable #Additional
  DatabaseType = mssql
  JAVA_CLASSPATH_customjdbc=$SharedDir/classes/jTDS-1.2.4.jar
  SearchIndexerEngineName = DATABASE. METADATA
  Server web apache =
  IdcAdminServerPort = 2220
  IntradocServerPort = 2222
  
  Please help me on this... I worked in stellent IBPM 7.6 sp2 in a large cpompany and never had the opportunity to work on Setup frm scrach...
  
  See you soon
  Vivek
  
  Published by: 887781 on September 27, 2011 19:10

  Hello

  instance of #ucm10g

  LoadModule IdcApacheAuth IdcApache22Auth.dll
  Idc3 IdcUserDB '/data/users/userdb.txt '.

  /Idc3 alias "/weblayout".
  
  Order allow, deny
  Allow all the
  DirectoryIndex portal.htm
  IdcSecurity idc3
  

  This is how apache entries must be.

  Make the changes as above, and then restart Apache, Complutense University of Madrid.

  Test to see if the problem still persists.

  Thank you
  Srinath

• How to get to the Complutense University of MADRID

  Hello
  
  UCM is installed and running. There is no default file available in AAU... is there a process to create/get files (such as C) at the Complutense University of MADRID... Please help me to create the folders in the Complutense University of MADRID...
  
  Thanks in advance
  
  Published by: user11178721 on December 3, 2010 02:43
  
  Published by: user11178721 on December 3, 2010 02:44

  Hello

  Everything you have to do is to go to Administration - Admin Server - Component Manager: check the box for Folders_g - update and then restart UCM managed server. It's that simple :-).

  Thank you
  Srinath

• Setting up a virtual host Apache for Sites of the Complutense University of MADRID

  As the subject says: I am trying to configure virtual hosts with apache for the Sites of the Complutense University of MADRID. Now, we are trying to set up for each site of the Complutense University of MADRID, we have an ip address. Done on the browser when I see that someone typed in "http://www.myfirstsite.com" (through the magic of dns that they get routed to my server). Once they are at the level of the Apache Server I want to configure virtual hosts, so I can redirect the user to the appropriate site residing in the Complutense University of MADRID.
  
  Now, it is possible for me to access the sites by this "http://myservername/myfirstsite". But what I want Setup of Apache, is that when someone types in "http://www.myfirstsite.com" they see site whatever, I want them to see in the Complutense University of MADRID. But mann I just don't know what would be the document root or how could I go to get users to SEE what I want them to see. Can someone help me with this please? Thanks in advance.

  You should be able to stick with the default apache configuration where he will answer for any host name and create virtual servers for each instance with the root of the document appropriate for this instance of CS. Then you should be able to use rewrite rules to direct users to the virtual host appropriate depending on what URL they access the server with. See the documentation for Apache mod_rewrite around: http://httpd.apache.org/docs/current/rewrite/