Question on the alias in the Complutense University of MADRID

Similar Questions

• Conductor 3.0 with 10.5 of the Complutense University of MADRID - cannot get the AdHoc questions work/TLS record

  I'm working on a laboratory configuration to prepare application a client driver 3.0 with 10.5SU1 of the Complutense University of MADRID.  I have the base line everything up, but I can't get the Ad Hoc conference bridge to enroll at the University Complutense of MADRID by the conductor, nor I can SIP trunk to become accessible.  This all points to a TLS problem, which is reflected in the newspapers of the Complutense University of MADRID:

  Pre-verifie SdlSSLTCPListener::verify_cb = 0, cert check errno = 20, depth = 0
  00269848.000 | 22:41:54.023 | AppInfo | HandleSSLError - verification of the certificate has no:(Verification error:20)-Impossible to get the certificate of the local radio station for 10.0.0.113:41409

  This repeats for the Ad Hoc and appointments of the intellectual property on the driver.

  I followed the conductor with the guide of the AAU (http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/con...) as well as the deployment of certificate (http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/con...) guide.  I have a root certification authority I use (lab.local), I installed the root certificate and the certificates of the host on both devices.  OpenSSL gives me the verification of the return code: 0 (ok), at once UCM and conductor during validation to the root certificate.

  I think that I followed the guides and double-checked against them.  Someone else has seen this? What Miss me?

  Hi Ryan,

  I think that I am running into the same question... The TAC engineer gave you a bug ID I can follow?

  Thank you

  Peter

• External users at the Complutense University of MADRID

  I have LDAP connected to the Complutense University of MADRID. So when a user connects to AAU, they are automatically added to the Complutense University of MADRID and the roles are given to their development on the groups that I place in the LDAP backend. If it works well.
  
  That is the question:
  How can I go on adding users to the Complutense University of MADRID by users to log on for the first time? Yes I can use local users and add them one by one, giving them a password of users, but that wouldn't make sense since it is imperative to allow authenticated users to LDAP. So basically I ask, this is a kind of "digitizing" utility or something that can scan the LDAP users add them to the Complutense University of MADRID by giving them appropriate roles. So when a user logs in the first time they already have necessary permissions/roles.
  
  I want to do this is because many of these users will participate in the flow of work as authors/approvers/Editor. Now, I'll have to sign their "first time" so they added to the Complutense University of MADRID and then I manually and add these users to their games of Alias (which are used in workflows to allow users to approve/publish etc..)
  
  Thanks in advance.

  In fact, I had a similar situation. You can also write a SQL script to add them into the User table so that they will become available as in the projects and all. Once the user connects, he will use this same entry you made in the database.

  Touch a point mentioned Tim, the user accounts and roles CAN be stored in the database (table UserSecurityAttributes) even if they are external. How we do it is, basically, that you have your LDAP users defined as internal dusertype and duserauthtype as well as external.

• setting up e-mail server in the Complutense University of MADRID

  Hi all

  I am new to the Complutense University of MADRID. I have to configure the mail server of development at the Complutense University of MADRID. How that.any idea?

  : PEI

  bad question.how I do know.ask your mail administrator.

  for ex -.

  MailServer - example - testmail.com

  Admin e-mail - [email protected]

  It may be useful

• SAY do not check in the PDF back to the Complutense University of MADRID

  Hello
  
  I put TELLING you 'open' a document instead of default 'view'. Now, when I "opened" a Microsoft Word document, it is extracted. I can modify it, and when recording, it is extracted in Complutense University of MADRID a new revision by SAY.
  
  When I do the same thing with the PDF, I try to open a PDF file, it opens and not re-recorded in UCM after save and close. I have to checkin explicitly the document to the Complutense University of MADRID.
  
  If I use Adobe Writer, it works well.
  
  However, even with the Adobe reader software, should not order the full doc. After the closure of the doc, it should ideally placed to the AAU. This work is designed?
  
  Thank you
  R

  I expect that hit you the questions with the support of adobde for WebDAV, which is best described as limited.

  There will be a number of customers who will not support WebDAV to record new content in the Complutense University of MADRID

  Tim

• Release Date of the Document at the Complutense University of MADRID is 1 day earlier

  Hi Experts,

  I use WebCenter content 11.1.1.8.0 and here if I'm checkin document of Console and the Complutense University of MADRID Capture workspace console it takes 1 day release date earlier.

  For example: If Today(28/0ct/2015) I'm checkin document release date will be (October 27, 2015) and UCM Console too, I can see the same date, please let know us how I can change the date of release of the day...

  Thank you

  Sanjeev

  Follow these steps:

  1. connect to your content as a user admin server.

  2. go to the admin user.

  3. you should see a list of users display, select the user having cause and then click on edit in the user Admin screen.

  4. on the Info tab for this user, check the time zone of the user. What is he on?

  5. If the zone shows something different for the user, then change the correct time zone.

  =================

  Another point:

  The value "EnableSetIdcTimeZone = true" in config.cfg and also check after restart

• WebService custom at the Complutense University of MADRID

  Hello world

  Can anyone confirm if a web service at the Complutense University of MADRID is created the same way as creating an IdcService custom.

  To experiment, I generated the WSDL file for my personalized service, but I can't find any entry and exit of the metadata in the WSDL file.

  I'm it's incorrect, generating or y at - it another way to create a webservice in UCM or am I supposed to manually change my WSDL?

  This is what looks like the element

  < s:element name = "getTwoMetadata" >

  < s:complexType >

  < s:sequence >

  < s:element minOccurs = "0" maxOccurs = "1" name = "extraProps" type = "s0:IdcPropertyList" / >

  < / s:sequence >

  < / s:complexType >

  < / s:element >

  In fact, it takes in 3 metadata, but does not show here.

  Thanks in advance

  Hi Valerie,.

  So custom WSDL can be created the same way as we do for STANDARD services. I assume that you have added the relevant parameters of the demand for this service and then run WSDL generates. If not, then try and communicate the results.

  Thank you

  Srinath

• OAM 11gR2PS2 - no authenticated access to public Documents at the Complutense University of MADRID

  Hi all

  We had a requirement to one of our clients, in which the documents who have received the public's access to the Complutense University of MADRID should not be challenged for authentication.

  Examples of URLS that are not in dispute when you use the managed for UCM server port (16200)

  http://xxx.com:16200/cs/idcplg? IdcService = GET_FILE & dID = 1445 & dDocName = DEV_COMPLOGO_31364 & allowInterrupt = 1

  http:// xxx.com : 16200/cs/groups/public/documents/digitalmedia/b2dv/xzmx/~edisp/dev_complogo_31364.jpg

  This GS search page ready must also open without authentication.

  http:// xxx.com : 16200/cs/idcplg? IdcService = GET_DOC_PAGE

  After the configuration of SSO and protection/CS, when I go above URL using the port of OSH only the second opens without challenge me the name of user and password.

  Knowing that I can protect/unprotect URL patterns, I was wondering if this is possible using OAM at all.

  The document is assigned to a group of public safety at the Complutense University of MADRID.

  http://xxx.com:16200/cs/idcplg? IdcService = GET_FILE & dID = 1445 & dDocName = DEV_COMPLOGO_31364 & allowInterrupt = 1

  By looking at the URL, would you be able to identity if this url is to document to the Group of public safety? All of the query parameter would help you to differentiate the document in the public safety group

  If the answer is NO then you will not be able to create policies OAM who could remove the URL

  If the answer is YES you can then use 'Query parameter' section resource OAM to remove the specific URL

  hope this helps

  Concerning

  Aakash

• creation of custom in the Complutense University of MADRID component

  Hi all

  I'm a newbie in the Complutense University of MADRID. I need to created a component custom that will insert and update the record in the table of the Complutense University of MADRID. How to do this? I can't find any example on google.

  its urgent assistance please.

  Check the samples component how-to for Oracle UCM 11g | Bex Huff

  There is a single component, DataAccess, that shows exactly how.

• Mapping of the external LDAP user with the role of the Complutense University of MADRID

  Hello WebCenter content masters,
  
  I'm having trouble mapping a group LDAP to the role of the Complutense University of MADRID.
  Let me explain the situation.
  
  I have an external LDAP (Apache DS) with two groups (groupofuniquenames), 'Administrators' and 'Test' and two users 'ldap_admin' and 'ldap_user '. ldap_admin is a uniqueMember administrators and the ldap_test a test uniqueMember.
  
  At the University Complutense of MADRID, I created a custom role 'Test' with privileges "RWD" group 'Public '.
  
  I guess that the external LDAP has been configured successfully as an LDAP authenticator provider - myrealm settings tab, since I can see groups and external LDAP users, and they can connect the DCU with their user id and password.
  
  However, ldap_user is unable to perform the check, and on their profile page, the role is "invited, authenticated."
  And when I pass ldap_user in the test group to the Administrators group, the role is then "invited, authenticated, admin, sysmanager, refineryadmin, rmaadmin, pcmadmin, ermadmin.
  It seems that the Administrators group is mapped correctly, but not the group test.
  
  I try to apply the advice given in these two threads:
  External LDAP user has only priviledge research at the Complutense University of MADRID
  Unable to map external users to roles in content Webcenter 11 g
  
  I have created a 'externalLdapMap' identification card, completed the provider.hda file and put the map "Test, Test". I also tried with "Test, contributor" that I was not sure about the first mapping.
  Whatever it is, after restarting the server of the University Complutense of MADRID, I'm still not able to grant the privilege of writing for a user to the Administrators group.
  
  I missed something in the process?
  Thank you for your attention and of course any help would be greatly appreciated.
  L.

  Hello

  I think that you have enabled the LDAP authenticator credits and that this error will go up.

  You must create an OpenLDAPAuthenticator and do the same settings with flag set up and then test the scenario.

  Thank you
  Srinath

• user autherization at the Complutense University of MADRID.

  Hi all
  
  Please, help me to understand next.
  -> 11 g authentication is carried out thorugh Admin Server.
  -> When we configure a new provider and reorganization of albums, autherization user takes plase from there only.
  -> we need create a ldapProvider at the University Complutense of MADRID after you have created the new Admin Server provider.
  -> what is the purpose of jpsUserProvider in above senerio.
  -> for built-in ldap users mapped to the role/account r group.
  -> should we create role account with the same name at the University Complutense of MADRID also?
  
  These are the fundamental issues that I'm not able to understand in the oracle documentation.
  
  any help is much appreciated. (Please provide a few entries, I hv been through security oracle docs section in the Administrator's guide)
  Thank you
  -Yves

  Hello

  --> 11 g authentication is performed Server Admin thorugh.

  WLS is the central Security Manager where the authenticator of security provider like authenticator by default (for Embedded LDAP), OIDAUthenticator (for the OID), ADAUthenticator (for AD) etc. are created when any external identity store must be used for the AAU.

  --> When configure us a new provider and reorganize top autherization user takes plase from there only.

  That is right. It is one of the steps that must be accomplished where configure WLS security providers. With PS5, we can have several providers authentication and using her virtualize indicator = true in the security xml file, users can be authenticated from these multiple sources.

  --> do we need to create ldapProvider at the Complutense University of MADRID after you have created the new Admin Server provider.

  No.. It is supported to WLS.

  --> What is use of jpsUserProvider in high senerio.

  Read / available to users at the AAU of WLS.

  --> for ldap integrated users mapped to the role/account r group.

  For all groups of cases LDAP / AD are mapped as the roles at the Complutense University of MADRID.

  -> do we need create the role account with the same name in the UCM too?

  No.. You can use the credentials to map the LDAP group / accounts to the roles of the UCM / accounts.

  I hope this helps.

  Thank you
  Srinath

• Using webservices to archive files to the Complutense University of MADRID

  Hi all.
  
  We are trying to perform some tests to the Complutense University of MADRID, but we do not see many examples on this subject.
  That's what we want to do:
  
  We want to use Web services for archiving of files at the Complutense University of MADRID.
  
  How?
  
  1. we will develop a java application
  2 inside of the application, there will be a button that calls the Web service
  3 after the Web service is called, the document should go outside UCM
  
  So far, I only do research. Read the documents on Web services, how they work and what I could find.
  But I can't find an example about this. Someone, please, I could tell where I can find it?
  
  Thanks for your help and your patience.
  
  Fernando

  Just in case someone was looking for a code example, I created one:

              Stub stub = (Stub)client.getPort();
              stub._setProperty(stub.USERNAME_PROPERTY, "weblogic");
              stub._setProperty(stub.PASSWORD_PROPERTY, "welcome1");
  
              IdcPropertyList ipl = null;
              IdcFile primaryFile = new IdcFile();
              File f = new File ("C:/temp/test.doc");
  
              primaryFile.setFileName(f.getName());
              primaryFile.setFileContent(CheckInSoapPortClient.getBytesFromFile(f));
  
              //client.checkInUniversal(dDocName, dDocTitle, dDocType, dDocAuthor, dSecurityGroup, dDocAccount, CustomDocMetaData, primaryFile, alternateFile, extraProps)
              CheckInUniversalResult result = client.checkInUniversal("", "Checked-in via WS call", "Document", "weblogic", "Public", "", ipl, primaryFile, null, null);
  
              System.out.println(result.getStatusInfo().getStatusMessage());
  

  All I needed was the CheckIn.wsdl and JDev (I created a Web Service Proxy, he gave the WSDL file and added in the code above to an auto-generated Java).

• where is Folders_g at the Complutense University of MADRID?

  I am following the Tutorial, http://docs.oracle.com/cd/E23943_01/webcenter.1111/e10273/createconnect.htm#BGBDDHAA
  I encountered an error when connecting to UCM11g of JDev11.1.1.6
  
  It is said, "SEVERE: could not the content list of the folder with the ID = dCollectionID:-1.
  
  someone in the RTO said I activated the "Folders_g" at the Complutense University of MADRID (under Administration - Admin Server - Component Manager). but I can not find "FrameworkFolders". and enable "FrameworkFolders" doesnot work for me.
  where can I find the Folders_g? Thank you.

  -First, disable the framework files and restart the managed server. Framework and Foldersg files cannot be installed at the same time. _
  -On the page where you have enabled frame files, upwards (in the body of the page), it has a link to "Manager of advanced components." Click on this link.
  -Scroll down to the section "disabled components."
  -Select "Folders_g" and press the button "Activate" in the list of the disabled components.
  -Restart the managed server.

• How to get around the process of authentication of the Complutense University of MADRID

  Hi all
  
  I use Oracle Content Server and I need to get the file directly so I can attach my mail application. However, I am able to get the native file using this URL:
  
  
  http://localhost:16200/cs/idcplg? IdcService = GET_FILE & dID = 29401 & dDocName = IPM_029601 & allowInterrupt = 1
  
  But as soon as I click on that URL, it shows me the Login Page and after you submit the user name and password, it gives me the file to save to my local computer.
  I need to bypass the authentication page, and I need this file directly to save on my local computer.
  Is there a method that I can implement to pass the credentials as hardcoded or is it possible to pass the credentials in the url GET_FILE above.
  
  Please suggest!
  Urgent!
  
  Thank you...

  Taken the lead here: service GET_FILE p does not accept user and password settings. He worked while authentication has been cached in the browser.

  If you can handle protocols SOAP & WSDL side client (Visual Basic or Java), then there is the solution to get the file from the Complutense University of MADRID with a proper authentication. It is a GetFile.wsdl to start.

  http://download.Oracle.com/docs/CD/E17904_01/doc.1111/e10807/a01_wsdl_and_soap.htm

  and 10gR 3 manual with even better examples:

  http://download.Oracle.com/docs/CD/E10316_01/CS/cs_doc_10/documentation/addons/soap_wsdl_10en.PDF

  Kind regards
  Boris

• Any model of user interface to display the banner from the content of the Complutense University of MADRID

  Hello
  There is a requirement to indicate the type of banner of the portal in the webcenter spaces, where it should display html content one after another since the press kit of the Complutense University of MADRID. The banner should Flash each content for a while and repeat the cycle. Access to the content can be easily controlled by the security of the University Complutense of MADRID, so that each user sees a different content in the banner. Is there a Webcenter UI model or example to achieve this usecase? Any thoughts on how to build this banner in webcenter spaces 11g ps3? something like http://www.npower.com/Home/index.htm (see banner in the Middle - but the content should be different pages)
  
  Concerning
  Prasath.C
  
  Published by: Fabien C April 30, 2011 15:49

  I don't know if you can do it with flash, but it might be possible. If you really want to use the flash, I advice allows you to use the REST API to query the content to the correct content server or use the AAU regular services for web content.
  If you really want to use flash, but I just want to have the feature of changing the content of a banner once every few seconds, you can also use JQuery in combination with the content presenter. You must write your own template to the content Distributor and use JQuery or some JS framework to make things. In my view, it should also be possible without JQuery, but I have not tried...