Creating user

Similar Questions

• Model 48L5441DG - each time creating user menu appears

  Hello

  I have the model 48L5441DG. and whenever I click on the button that I need to create a new user account to the House!

  each time creating user menu appears instead of going to the home page of profile.

  is this a known issue?

  I checked for updates of firmware but not exist for this model.

  are there updates the firmware for this model?

  Thank you

  If you have already created the account Smart-TV the TV should save the connection data and new account creation is not required.

  Please try to reset the default TV and try again.

• confused by Create User Event

  I have not done much user events.

  According to the help of LabVIEW,.

  The entry for the function Create User Event is an individual item or a cluster whose name becomes the name of the user event, and whose data type defines the type of data for the event.

  In VI I inherited, the original programmer has a cable of a cluster error (no error) in the event user create.

  What does this do?

  NYC says:

  What does this do?

  Allows someone to send error information using a user event.

  

• I have created a new domain with win2012r2 and created users. Add after the client in my area so that the newspaper with the user I get error below.

  Hello

  I have created a new domain with win2012r2 and created users. Add after the client in my area so that the newspaper with the user I get error below.

  "You cannot connect because the logon method, you use is not allowed on this computer, please, see your ad min for more information network"

  Please help me with that and I don't want to give permission to admin for all users group...

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• problem with "could not create ' users\locals1 ~ \Temp"-unzip operation cancelled. "

  When you try to install the Blackberry software, I get an error "could not create ' users\locals1 ~ \Temp"-unzip operation cancelled. " How can I fix it?  I am the only user, and I have administrator permissions.

  Try right click on the system icon and then click on run as administrator and see if that helps.

  (t which does not help and because the problem is the installation software Blackberry, pleaee transfer your question in the Forum program at the: http://social.answers.microsoft.com/Forums/en-US/vistaprograms/threads , where programs other than Vista experts will be more than happy to help you with your problem.)  There may be a special procedure to install the Blackberry software that requires additional or different steps.

  I also suggest that you contact Blackberry technical support to see if they can help you - they must be very willing to help you (as they otherwise lose a sale, as you can return it for a refund if you do not it works properly).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Issue. How is - a share their created user dashboard?

  Issue. How is - a share their created user dashboard? I created a dashboard a few months I would like to share with others in my group, but for the life of me, I can't find the option to share the dashboard. Can anyone provide an overview of this? I use vFoglight 5.5.4.4.

  Hi Dwight,.
  In the pane actions on the right in the tab general, you should be able to click on properties, then change the basic properties. From there, you can select which roles can view your dashboard. It should then appear in the pane on the left at the bottom under 'other dashboard users' (or something equivalent).
  I have not found a way to put my dashboard in the "my dashboards" of another user if.

• Value UDF user not multiplication of database after creating user

  Hello

  We have created 120 UDF to create the profile in IOM and published the sandboxes. (UDF created in the designer in the sysadmin console, add the UDF Create User page)

  The UDF do not appear in the database. But after creating user (which is a success), I don't see the UDF values we have input during the creation of the user did spread to the database. We are sure that we checked for the correct UDF in the database.

  Please let me know the possible cause to this question. I checked the logs and see no error while/after creating the user.

  Please help as to what causes this problem and what can be the possible solution.

  OIM 11 g R2 (11.1.2.0 - BP08)

  -Thank you.

  Abhished,

  Please do not mention the link. It is false. When you create a UDF file to create a user Page, the data component should be the component data - catalog and not the component data - user management.

  Thank you

• How to create user defined groups and users with custom permissions as only open and export in obiee 11 g?

  Hello

  I want to give as open & export to the level of permissions.

  How to create user defined groups and users with custom permissions as only open and export in obiee 11 g?

  For example, if the group permissions, inturn should reflect on the users.

  Please help me.

  Thanks in advance,

  A.Kavya.

  Your question is quite broad and fuzzy then I suggest the security catalog presentation to read documentation: http://docs.oracle.com/middleware/1221/biee/BIESC/mgrgrpsusers.htm#CIHIBJGD

  And I think that you mix you two things which are managed in different places:

  ) an object as read access permissions, write, delete... which control you through the object "Permissions" dialog box

  

  

  (b) functional privileges controlled through "Manage privileges" under "Administration".

  

• Additional portal for creating users and groups in OBIEE.

  Good afternoon everyone

  We are facing a situation where a resource by another company needs to create and manage their own users who will access OBIEE.

  That means that for the moment we have create users in Weblogic, but we cannot provide the resource with access to weblogic due to many other services running in the Weblogic causing a safety hazard.

  My question: is there another way, we can provide access to this resource through a portal that will only be able to manage the users and groups that will access OBIEE and not be able to view all other settings?

  Concerning

  Benoit

  Hi Benoit,.

  Cool, can you close the thread if it is right for you? Currently, it is still marked as

  This issue is no answer.

  If you have detailed follow-up questions (which I think you will to the BISQLProviders) you can make a custom thread and we will deal with this matter else on its own.

  See you soon

• IOM create user CommandToolbarButton customization

  Hi - I'm trying to customize the button create a user on the search page - users.jsff using personalization of sandbox. The required functionality is to have a drop down to appear when you click on the CommandToolBar button (to create), with a list of commandMenuItems. This is the customization that I can insert successfully through customization of Sandbox. However, when I click on the command button, no drop-down list is displayed. Any suggestions?

  < mds:insert parent = "t2" = "last" position >

  " < = xmlns:af af:commandToolbarButton ' http://xmlns.Oracle.com/ADF/faces/rich "text =" users to create the "id ="CUsersCommandButton"> "

  " < = xmlns:af af:showPopupBehavior ' http://xmlns.Oracle.com/ADF/faces/rich "popupId ="testpop"triggerType =" click on "/ > "

  < af:popup id = "testPopup" >

  < af:menu text = "Create User" id = "UserCreate" >

  < af:commandMenuItem text = 'create the Type 1 user '.

  ID = "xxx" icon="/images/addmember.png."

  immediate = "true".

  actionListener =""

  rendering = "true" / >

  < af:commandMenuItem text = "create user Type 2".

  ID = "yyy" icon="/images/addmember.png."

  immediate = "true".

  actionListener =""

  rendering = "true" / >

  < / af:menu >

  < / af:popup >

  < / af:commandToolbarButton >

  < / mds:insert >

  Thank you

  I used the code below in IOM and it worked very well, as expected, you can take this as a reference:

  action = "#{backingBeanScope.proxyBean.searchUsersInOIM}" partialTriggers = "addProxyPC" / > "

  autoHeightRows = "0" >

• The Active Directory Connector - create user SUCCESS response code

  Details of the environment: Oracle® Fusion Middleware 11 g Release 2 (11.1.2.2.0)

  Build IAM_11.1.2.2.0_GENERIC_131230.2258

  I have a task of personalized process that puts into service a right to the user and notifies the credentials of the user to the Manager.

  These tasks are conditional and configured to be triggered only when Create User returns the response as a SUCCESS code.

  The more bizarre behavior, these process tasks are triggered before (update of the value of the UID in the form of process OR before the response code defines SUCCESS) AND after (the user is created in AD).

  Anyone seen this?

  Questions: Email Notifications are going very well, but when set up right, account was not created in IOM.

  Share your ideas-thank you

  Try to set the task of the user to create a previous task for each of the other ones that must run first.  You can also add additional tasks that must be completed first too.

  -Kevin

• Where should create user information be in the approval workflow?

  I have created an approval workflow that is patterned after the Oracle DefaultOperationalApproval with JDeveloper 11.1.1.7.0 example.  I am able to see the information of the applicant and request model information.  This is the xml code that I can see from Enterprise Manager (11.1.1.7.0).

  "< ns2:processxmlns:ns2="http://xmlns.oracle.com/ApprovalApp/AlliantOperationalApproval/ApprovalProcess"'xmlns="http://xmlns.oracle.com/request/RequestDetails">

  < IdDemande > 240 < / RequestID >

  < RequestModel > Creating user < / RequestModel >

  < RequestTarget / >

  < RequesterDetails >

  < FirstName / >

  < MiddleName / >

  < name > Simon < / LastName >

  < login > AJ. SIMON< / Login >

  < DisplayName > Simon < / DisplayName >

  < ManagerLogin / >

  < NomOrganisation > Combining < / OrganizationName >

  < email / >

  < StartDate / >

  < EndDate / >

  < status > Assets < / status >

  < XellerateType > For the end user < / XellerateType >

  < UserType > Consultant < / UserType >

  < role > All USERS < / role >

  < / RequesterDetails >

  < BeneficiaryDetails >

  < DisplayName > No < / DisplayName >

  < / BeneficiaryDetails >

  < ObjectDetails >

  < attributes / >

  < / ObjectDetails >

  < url >

  http://Oracle.vagrantup.com:14000/workflowservice/CallbackService

  < / url >

  < OtherDetails / >

  < / ns2:process >

  
  

  In researching this issue, I see that the BeneficiaryDetails has no new information of the user depending on this issue.

  Beneficiaries details forthcoming as null in SOA Composite custom - Create User

  
  

  Where should I see the Dataset in the payload? I guess I may have some incorrect mappings?  I need to find the UserType and new user name and other information.

  
  

  Thank you

  
  

  Tom
  
  

  
  

  If you go here in the Oracle assets: http://www.oracle.com/technetwork/middleware/id-mgmt/overview/oim-11g-assets-504842.html

  There is approval workflow and a 11.1.2.0 example.  It contains the final workflow that can be deployed.  You can take this as an example and information out of it for your authorization custom which may help to recover what are necessary.

  -Kevin

• vCAC6 IaaS installation fails with configuration wizard - cannot run SQL Create User command

  Kia Ora.

  Put together the first poc vCAC6. The devices are in place and works fine, now up to IaaS Win2k8r2 with local SQL Express and this install fails. Pre-Reqs work. Installed and patched .NET 4.5 (not 4.5.1) as well.

  I installed as a local administrator on the server arrived at the field of IaaS. Installation running. EXE using run as administrator.

  The installation creates the database in SQL Express premises. I slowly raised privileges to solve the problems, but the same lines are written to the LOG file and there is an installation failed.

  News: 2014-01-15 09 49 58 588 h: construction project is "C:\Program Files (x86)\VMware\vCAC\Server\Database\DeployVMPS.xml" (BuildDB Target.

  News: 2014-01-15 09 49 58 604 h: build succeeded.

  News: 2014-01-15 09 49 58 604 hours: 0 warning (s)

  News: 2014-01-15 09 49 58 604 h: error (s) 0

  News: 2014-01-15 09 49 58 620 hours: time 00:03:35.12

  News: 2014-01-15 09 49 58 667 hours: CREATE USER [serverName\Administrator] to [NVCACIAAS\Administrator] CONNECT

  News: 2014-01-15 09 49 58 682 hours: EXEC sp_addrolemember 'db_owner', 'serverName\Administrator. "

  Error: 2014-01-15 09 49 58 854 h: error: vCAC Configuration Wizard is unable to run the Sql CREATE USER [serverName\admin] FOR LOGIN [serverName\Administrator] command.

  Error: 2014-01-15 09 49 58 854 h: error: vCAC Configuration Wizard is unable to run the Sql CREATE USER [serverName\Administrator] FOR LOGIN [serverName\Administrator] command.

  Is not not a SQL guru, I tried to elevation of privileges and exchanged between using SQL and Microsoft connection. tried to hook up with a new SQL and AD security with rights to MSDB db_owner account. Also as a 'Microsoft authenticated. " each re - run provides the same statements without worrying if the localMachine\Administrator account exists or not.

  Any help much appreciated.

  Thank you and happy new 2014!

  Hi there.

  I added the administrator account of the local computer in the security of SQL Express to the sysadmin role and installation is complete. ?!? Although I tried to use the SA account to install and the same messages of error and success in this file as well newspapers runs.

  Now these lines look like this;

  News: 2014-01-15 10 21 50 978 hours: Service NVCACIAAS\Administrator account is the same account that creates the database.  Task of grant of role of ignored by the database owner.

  News: 2014-01-15 10 21 50 994 hours: Service NVCACIAAS\Administrator account is the same account that creates the database.  Task of grant of role of ignored by the database owner.

  If it is installed, but I don't know why I need to raise the local Sysadmin role administrator account so he could complete or why to create the user account wrong localMachine\Administrator in installation because there was.

  I've rolled back to a previous snapshot and was able to repeat the failure until I added this user account to the Sysadmin role.

  Her go configuration and usage vCAC now. I'll repeat the installation at a later stage.

  see you soon

• How to create users in bulk in Hpyerion Shared Services Console

  Hi all

  I need to create users in bulk in the Shared Services Console. Since I have many users, so I don't want to use Front End. Instead, I prefer to download a CSV of things sort.

  For this I export the console shared services and open the file Users.csv.

  Now my plan is to add all my users here and then going to import this backup of the Shared Services Console.

  The only point where I am confused is that how should I indicate the passwords encrypted in the file Users.csv and also what should I write in the column "internal_id."

  If you use LCM and native users then you should be able to enter a uncrypted password and when it is imported, it must be encrypted.

  Leave empty internal id column for new users, by creating a new test user.

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• creating users and groups in weblogic.

  Hi, I'm new oracle bpm technology. I want to create users and groups for workflows. So can you please guide how to create in weblogic server.now we use oracle BPM 11.1.1.1.6.

  This should help - http://www.youtube.com/watch?v=NAHv_76Ozk8

• IOM 9.1.0.1:-create user with approval.

  Guru, Experts,
  
  I am currently using IOM 9.1.0.1, and I want to create the user features to be working with approval. Whenvr a user or xelsysadm attempts to create the user and it must then ask for approval/Rejact then only it will create or deny the operation.
  
  Thank you
  Hemant.

  (1) create a dummy resource, say 'CREATE the RESOURCE USER IOM'... It should be of type 'Order of the organization' and not 'Order for User. Create a model organization, such as CREATE USER ORGANIZATION or better ORGANIZATION OF USER OPERATIONS too for the sole purpose of acceptance of the application.

  In the form of resources either in the form of object, take all required attributes such as user login, first name, last name, organization etc.

  (2) establish an approval process: say "assign system Admin Approval '.

  (3) in the assignment tab, assign the task to the Group--> SYSTEM ADMINISTRATOR (or any other group of your business condition)

  Optionally, you can even send emails too.

  (4) in the process of commissioning, in the stream, flow, the shape of the object in your process.

  (5) in the "Create a user" task, call tcUserOperationsIntf.createUser () and pass all from processes form...

  (6) raises 'request '... Fill in the data... And then approve it... The user must be created...

  (7) in the CREATE USER ORGANIZATION profile resource, the IOM CREATE USER the RESOURCE and the process shape shows all the attributes of the user.