Creation of a FileContents breaks if setTooltipText a html string is passed

Similar Questions

• Palm Pre cannot do timed Pause or break closes in a dial string. (e.g. online access to the Conference; Access voicemail; NBR of 10 digits, pause, spindle)

  I called Palm support who told me to use commas for 1 second pauses, even if this was not documented any where ever I could find. After thanking them and hanging up I tried. It does not work. Commas are deleted as soon as you click DONE to save the changes. I called Palm, with the same number of tickets, and they have reproduced the problem. 18 hours later (as promised), they called back to say there is no work around, but software engineering focuses on this offer in a future update.

  Now, I can not access voicemail (1) Office, with House (2) answering machine, voice conference lines (4) (3) cable phone that requires entry of a PIN; (5) launching my own conference for others to compose in bridge.

  Those are often used while I'm driving (auto speed) 1 access key to an integrated chain of 24 characters with 2 breaks is a huge requirement for safety and convenience.

  This will be a major issue for the business users and the fix should be in the next push of software. This cannot be considered a new feature request, it's a bug. Even in charge think commas should work. This seems to be a mistake to design and test.

  [Later note: Although there is an open ticket to Palm, I have also posted here in the hope others would chime if this feature is important to them.] Visibility + Votes = pressure + interest = fixed sooner?  ]

  Features of technology of the Palm Pre are works perfectly for me. I don't know how something this basis exceeded the testers.

  Have you tried 'P' for break?

  Just curious...

• 2 columns with the correct page breaks

  Hello

  I am producing a presentation of 2 columns in my form.

  The problem is: these columns span several pages and I can't right page breaks.

  I have a provision passed with two adjacent subforms that make my columns. In these column subforms I fill out a lot of data from XML.

  Problem 1: I get bored about 5 rows at the end of the page. They disappear into the page break.

  Problem 2: my second column starts to fill up on the second page (which is be the page where the first column ends).

  I also tried with a single table with exactly one line. But it disappear all lines after the first page and I get empty pages instead.

  Has anyone ever encountered this problem?

  What is a good way to build dynamic forms of 2 columns?

  Ulrich

  You will not be able to move beyond a page, then return to the previous page... .the data must be split so that the complete presentation of a page should occur before moving on to the next page.

  You can't go back in the time layout a page is complete... Sorry he just can't do that.

  Paul

• HTML break error

  RoboHelp6 for WORD
  Windows XP
  Creation of WinHelp2000 project
  
  When I create a "HTML jump" in Word and set the following properties, I get the following results:
  
  1. display of WinHelp, specify the URL - works
  2 2 afficher display in the browser, specify the URL - error
  3 3 afficher view in WinHelp, specify the local HTM file - error
  4 4 afficher display in the browser, specify the local HTM file - error
  
  It the error is still "an error exists in this help file. Contact your application provider an updated Help file. (1024).
  
  What Miss me?

  Found.

  Need to add extensions for the generation of project for the required DLLs. I chose to all.

• Eliminating the HTML but keep line breaks

  I'm hosting public users to submit the text of a field "description". However, I must reject HTML when it is displayed. I found the HTMLEditFormat() function that does this, but I lose line breaks and paragraph breaks.
  
  After the search this site for answers, I can't find a solution to keep the line breaks AND paragraph breaks while eliminating the HTML.
  
  I tried the below functions, but all have a problem. The closest one is NOT in <!-xyz-> comments. It removes HTML, preserves the new paragraphs but NOT line breaks. I can not find a solution that makes all three.
  
  <!-< PRE > < FONT FACE = "ARIAL" SIZE = "3" > #HTMLEditFormat (description) # < / PRE >->
  #ParagraphFormat (HTMLEditFormat (description)) #.
  <!-#Replace (description, "#chr (13) ##chr (10) # ',' < br >', 'all'") #->
  <!-#Replace (HTMLEditFormat (description), "#chr (13) ##chr (10) # ',' < br >', 'all'") #->
  <!-#REPLACE (ParagraphFormat (HTMLEditFormat (description)), "#chr (13) ##chr (10) # ',' < br > al l","" ") #->
  
  The use of < PRE > is the only one that preserves the jumps of line, but since users enter text in a text box that uses the line feed. The result pushes the long string of text in the table on the right side of the screen... .it can be enormous. So if I had a solution to force text < PRE > back to the line, I would be done.
  
  Thank you...-Tony

  OK, I found a solution: I have relaized I could save version (inset) HTML-stripped of the description in the database first. I did it using:

  <[^>]*>","","ALL")>

  Then when displaying, this simple replace preserves there line breaks AND new paragraphs:
  #Replace (description, "#chr (13) ##chr (10) #","")
  (', 'all') #.

  Hope this helps future forum watch-er to the-ERS. -Tony

• htmlText remove all line breaks

  In my program, a user can enter any type of text using a RichTextEditor. The entered text has all its illegal xml characters replaced (< with & lt ;) etc.) This string is placed in an xml document. A component is custom, then receives the xml document, converts the html code in its original form and the applicable as the htmlText of a property control of text. This used to work properly. I need string conversions because there are some "metaStrings" which is not replaced according to certain criteria... which is the string {$DATE} would get replaced by the effective date when loading at a later date. As I said, used to work, and I had no problem display of text exactly as the user who created it. Now, for some reason, when I set the htmlText property, all line breaks are removed, of any type. < here > < p > < / p > < /li > < li > for fleas. Remains of formatting, has increased the font size, color, etc., but there is no line breaks.
  
  I have my chiseled loading code and the following output:
  
  public static void loadHtmlText(textControl:Text,_textData:XML,_replaceMeta:Boolean_=_false):void
  {
  trace ("loading text html in a text component, loading", textData);
  var html:String = textData.Html.toString ();
  trace ("after parsing a string", html);
  If (replaceMeta)
  {
  trace ('replacing');
  HTML = html.replace(/\{\$DATE\}/,textData.Date);
  Add sequences additional meta here for replacement
  }
  trace ("after the replacement", html);
  textControl.htmlText = html;
  
  
  textControl.validateNow (); force a commit
  trace ("value that was set', textControl.htmlText");
  }
  
  and the following output:
  
  text html in a text component loading, loading
  < data >
  < html > & lt; TEXTFORMAT LEADING = "2" & gt; & lt; P ALIGN = "LEFT" & gt; & lt; FONT FACE = "listFont" SIZE = "10" COLOR = "#0B333C" LETTERSPACING = "0" KERNING "0" = & gt; Line 1 & lt; / FONT & gt; & lt; /P & gt; & lt; / TEXTFORMAT & gt; & lt; TEXTFORMAT LEADING = "2" & gt; & lt; P ALIGN = "LEFT" & gt; & lt; FONT FACE = "listFont" SIZE = "10" COLOR = "#0B333C" LETTERSPACING = "0" KERNING "0" = & gt; Line 2 & lt; / FONT & gt; & lt; /P & gt; & lt; / TEXTFORMAT & gt; & lt; TEXTFORMAT LEADING = "2" & gt; & lt; P ALIGN = "LEFT" & gt; & lt; FONT FACE = "listFont" SIZE = "10" COLOR = "#0B333C" LETTERSPACING = "0" KERNING "0" = & gt; Line 3 & lt; / FONT & gt; & lt; /P & gt; & lt; / TEXTFORMAT & gt; < / Html >
  NotSet < date > < / Date >
  < / data >
  
  after parsing a string
  < TEXTFORMAT LEADING '2' = > < P ALIGN = "LEFT" > < FONT FACE = "listFont" SIZE = "10" COLOR = "#0B333C" LETTERSPACING = '0' KERNING '0' = > line 1 < / POLICE > < /P > < / TEXTFORMAT > < TEXTFORMAT LEADING '2' = > < P ALIGN = "LEFT" > < FONT FACE = "listFont" SIZE = "10" COLOR = "#0B333C" LETTERSPACING = '0' KERNING '0' = > line 2 < / FONTS > < /P > < / TEXTFORMAT > < TEXTFORMAT LEADING = "2" > < P ALIGN = "LEFT" > < FONTS FACE = "listFont" SIZE = "10" COLOR = "#0B333C" LETTERSPACING = '0' KERNING '0' = > line 3 < / POLICE > < /P > < / TEXTFORMAT >
  
  After replacing
  < TEXTFORMAT LEADING '2' = > < P ALIGN = "LEFT" > < FONT FACE = "listFont" SIZE = "10" COLOR = "#0B333C" LETTERSPACING = '0' KERNING '0' = > line 1 < / POLICE > < /P > < / TEXTFORMAT > < TEXTFORMAT LEADING '2' = > < P ALIGN = "LEFT" > < FONT FACE = "listFont" SIZE = "10" COLOR = "#0B333C" LETTERSPACING = '0' KERNING '0' = > line 2 < / FONTS > < /P > < / TEXTFORMAT > < TEXTFORMAT LEADING = "2" > < P ALIGN = "LEFT" > < FONTS FACE = "listFont" SIZE = "10" COLOR = "#0B333C" LETTERSPACING = '0' KERNING '0' = > line 3 < / POLICE > < /P > < / TEXTFORMAT >
  set < TEXTFORMAT LEADING = "2" > < P ALIGN = "LEFT" > < FONT FACE = "listFont" SIZE = "10" COLOR = "#0B333C" LETTERSPACING = '0' KERNING '0' = > line 1Line, 2Line 3 < / POLICE > < /P > < / TEXTFORMAT >
  
  
  
  Uh, oops, all the strings wordwrapped, makes it impossible to read. There were three blocks < P > < / p > adopted in
  each of them said line 1 line 2 and line 3, respectively, and each of them must be on its own line.
  
  After forcing the validation of the text control after setting this string, it has that one tag < P > < / p > with all the text inside... 2Line 1Line line 3.
  
  
  Any ideas?
  
  It worked before, I did was move the parameter text in its own function, insead of a function called by the method of my custom component's data provider.
  
  Thanks for the help.

  Wow, almost three months later, when my work schedule allows me actually to take over this problem, and I have the solution :-). It turns out, I don't know why, or if same Adobe knows about the bug, but if you have fonts using style sheets for all controls on your application, that is, I have a style statement request where I placed the police then redering text html of the text control is bug, usually just remove all line breaks. Why, I have no idea, he is simply. However, the same bug does not occur in the TextArea component. Still, I don't know why, seems silly to me, but as the solution to this problem, simply create a component TextArea, backgroundAlpha styles set to 0, its borderStyle to 'none', set the editable to false and boom, you have a component of scrolling text, which doesn't render the text html incorrectly.

• ScanFile will ignore the zeros

  Hi, I use this algorithm for some time in 2012 CVI, but now in 2013 of the CVI, I found that ScanFile does not work the same for me.

  I'm not clear, whether it is a question of CVI 2013, or just a sleep bug I had never seen so far.

  I'm scanning via a tabs-delimited ASCII log file.  Some "columns" text, others are digital. I prefer to browse the columns in a way not rigid; that is, I'm not strictly following the order of the column as it exists in the log file.  Here's what it looks like:

  for (i=0; i%i[x]",&unitData[slot].id);
              break;
          case LOG_COL_SERIAL:
              ScanFile(fileHandle,"%s>%s[xt09]",unitData[slot].serial);        // discard tab (ASCII 0d09)
              break;
          case LOG_COL_REVISION:
              ScanFile(fileHandle,"%s>%s[xt09]",unitData[slot].revision);      // discard tab (ASCII 0d09)
              break;
          case LOG_COL_STAGE:
              ScanFile(fileHandle,"%s>%i[x]",&unitData[slot].logStage);
              break;
          case LOG_COL_RETRIES:
              ScanFile(fileHandle,"%s>%i[x]",&unitData[slot].retry);
              break;
          case LOG_COL_RUNNING:
              ScanFile(fileHandle,"%s>%i[x]",&unitData[slot].running);
              break;
          case LOG_COL_COMPLETE:
              ScanFile(fileHandle,"%s>%i[x]",&unitData[slot].complete);
              break;
          case LOG_COL_ELAPSED:
              ScanFile(fileHandle,"%s>%s[xt09]",elapsedString);    // discard tab (ASCII 0d09)
              break;
          /* Now fill a placeholder string with the remaining fields so that the file pointer stays in sync.*/
          case LOG_COL_DATE:
          case LOG_COL_TIME:
          case LOG_COL_VOLTAGE:
          case LOG_COL_CURRENT:
          case LOG_COL_STATION:
          case LOG_COL_SOFTWARE:
          case LOG_COL_SLOT:
          case LOG_COL_DESC:
          case LOG_COL_COMMENT:
              ScanFile(fileHandle,"%s>%s[xt09]",tempString);       // discard tab (ASCII 0d09)
              break;
      }
  

  The behavior I see now, it's that if I have all zeros in my log file in the numeric columns, these are are ignored until a value is found.  Suggestions?

  OK, I found the bug.  It was a little insidious guy!

  It turned out that I had an empty value for a column shortly after the creation of the log file.  Thus, there was a double delimiter (two tabs) and ScanFile was apparently stop after the first tab and discard the rest of the reading.

  So it's more prudent to conquer strings or values in each column.  Unless there is a safer way to sweep the line.

• text of the e-mail does not appear in hotmail or gmail in Firefox, but it does in internet explore

  A part of the text in e-mail from a particular sender does not at all appear in gmail or my hotmail in Firefox e-mail account. When I go to the same email using Internet Explorer, all the text is there. I tried the email viewing with disabled modules, and that did not fix the problem.

  Thanks for the message. The Inspector indicates that the message consists of a large number of tags nested inside of each other. (Screenshot attached)

  I don't see any purpose to have so many tags nested inside one another, because they are very repetitive, but many creation tools make no effort to write good HTML as long as it works in IE.

  The problem is that Firefox is not by not showing what it is rather than is not showing an image of plain text, as you saw when you paste into a word processing document. At least then you would know when something is missing. I don't know if/when that will be fixed, this is a known issue for some time.

  The redirect solution does not work on Gmail rich text/HTML mode, but if you switch to plain text mode, the list without style appears as a piece of text (screen attached). Not very useful, but it is there in a pinch.

  Sorry I don't have a good fix for the moment.

• I can not restore from the backup 'bookmarks-2013-03-31. "File not supported".

  I use Firefox in Swedish, but I think that these English terms:

  I did a back-up of my bookmarks in Firefox before I formated my PC, which resulted in this file: "bookmarks-2013-03-31". It's not an HTML-file and I think neither an JSON-file. When I'm now trying to "recover" the bookmarks from this file, it say's that the file-type isn't supported. What the heck?!? A back-up file that isn't supported by it's own program??!?
  (I just did a quick and simple back-up, and am now trying to restore it. It shouldn't be any problem, as I see it).
  

  Make sure that the bookmarks backup file has the correct file extension:

  • .html for HTML backup
  • . JSON for JSON backup

  You can check the type via the context menu of that file and open properties.
  
  If you are unsure of the type of file, then you can open the file in Firefox via "file > open a file.
  A JSON backup will appear as a single line of text without line breaks and one backup HTML in a web page with clickable links.

  A JSON backup begins with: {"title": "","id": 1, "dateAdded": }
  
  An HTML backup begins with: <! DOCTYPE NETSCAPE-Bookmark-leader-1 >

  Add quotation marks ("" ") around the name to rename the file with the correct file extension if the current file extension is hidden, or if she does not work otherwise.
  
  Check the file type in the properties using the context menu to make sure that the change was successful.

• I exported my bookmarks on an external drive. I want to import their return and they do not show when I click Import...

  When I click on import and then open the external drive does not show bookmarks. If I open the external drive via "Start/computer" I can see in it, ok.

  This probably means that the file is not an extension of .html file and you will need to rename the file to bookmarks-2012-09 - 14.html make Firefox the list in the import file selector.
  
  You can see the HTML file type is required in the lower corner on the right.

  If you are unsure of the type of file, then you can open the file in Firefox via "file > open a file.
  
  A JSON backup will appear as a single line of text without line breaks and one backup HTML in a web page with clickable links.

  • A JSON backup begins with: {"title": "","id": 1, "dateAdded": }
  • An HTML backup begins with: <! DOCTYPE NETSCAPE-Bookmark-leader-1 >

• Qosmio X 500 stop during the game - but only on the external power supply!

  Hello.

  Since I updated my BIOS to 2.9 I had this HUGE problem. And now, I created a user here, in the hope of my colleagues advice owners of Toshiba.

  Let me cut it, as it's enough for me confused.

  I bought the computer in March 2010 - is still under warranty.
  I updated the BIOS from 2.8 to 2.9. I always kept my computer up to date with the latest drivers Toshiba - and is still.
  But now, after update BIOS, all of a sudden, my computer shuts down, rotates instantly, as if someone pulled the cord and there is no battery attached.
  But it happens that whenever I start a GPU really requiring program/application. It is not happed when I use the computer for all the days of the things or watch movies etc.

  I put it well 3DVantage and of course, it crashed.

  BUT!

  If I pull the rope and let it run on battery - even if the performance that comes out is less - it does not crash, never, in any game that would break if I had the string attached.

  I was in touch with Toshiba service in Scandinavia - I live here and they couldn't tell me what was the problem, but they were pretty sure that it was not related to the BIOS, because while I was talking to them, I installed 2.8, and it's the same thing.

  It has been sprayed, treated and some more with compressed air, and if there is no dust left, it would be like concrete. I ran the game in windowed mode, while having Speedfan running, the temperature will never be greater than 65 degrees Celsius. So it isn't heat related.
  I used 3DVantage to test the CPU and see if that too would break, once again nothing.

  I think the long terms of workload. The GPU goes off when the workload exceeds a certain percentage/voltage/whatever and something in the BIOS which controls it, changed or left unchanged and there for is not skilled with the rest of the updates to the BIOS.
  Or maybe the problem is not BIOS related? is it something else? I'm really confused and the fact that I can use it for simple tasks, only confuses me even more - so this is only a part of the graphics card which is damaged?

  Even if it is under warranty, wait 10 days (if I'm really, really lucky, like place I bought it, is not exactly known for good service condition) is the last option.

  This explanation is rather long, but I'm not not short versions, and if you feel like I left something, say so, and I'll do my best to provide you with information.

  Thanks in advance!
  Nikolaj.

  Post edited by: n_larsen - typos.

  > Speedfan shows also a tab called Temp1 - ACPI... It may be offtopic, but what is?
  When I order the windows event log, it shows some errors about ACPI: (translated by myself from Danish)

  Advanced Configuration and Power Interface (ACPI) specification is an open standard and defines independent interfaces for hardware discovery, configuration, power management and monitoring.

  66 temperature is not too high so I n t think that automatic shutdown of the bottom are related to temperature.

  I have your case, I recommend reinstalling the OS window once more; install the operating system preinstalled Toshiba using the recovery disk.
  Then check the features of the laptop. I mean that you should not install any other software before checking the laptop. In many cases 3rd party software could lead to problems of different laptop then you should check the laptop using factory settings.

• Cannot get bluetooth to work on T410

  I have a lenovo t410 I'm not able to get the bluetooth to work. According to the lenovo Web site, my configuration came with it. ThinkPad T410 2537 C 84. However, when I click on the bluetooth icon nothing happens. I've uninstalled and reinstalled the driver and click on bluetooth icon still does nothing. Also the bluetooth does not appear when I press fn + f5 that is only the wireless adapter.

  Sorry for the long break in my response, Mardi Gras is passed here in New Orleans. This is the bluetooth adapter cable. I bought a new cable and adapter, replaced and it works. Bluetooth was not appearing in bios so I thought it should be material. Thanks for your help.

• Time of design and of the dynamically created controls

  I have a project written in VC6 as a project of the MFC dialog box. In a particular area, I dynamically create several (the exact number depends on user input) CNiGraphs. There is also a two CNiButtons that were created at design time using the resource editor. The problem I have is that when this dialog box is open, a message appears saying it is an eval version and the control will go off after 5 minutes. After 5 minutes of waiting, the CNiButtons 2 go inactive (black tower), but the continuous CNiGraphs of work. I have a valid license of MStudio 8.1.6, version but it seems that these 2 buttons do not recognize the license. There are also other buttons from the moment of conception of the project, but these have no problem at all. When you create the dynamic creation of the CNiGraphs, give them a valid license string, and I was wondering if there is a problem with the time created and dynamically controls created in the same dialog box to design. Anyone know?

  I don't remember, but I can have created these 2 CNiButtons when I was with only an eval license. (All others were undoubtedly create when I got a full license) Could have an impact on them? I have a vague memory of reading somewhere that DTC create controls to check the license when they are created in the designer and store that info in them license. If this is the case does anyone know an easy way to update the license stored in control? I rather not just delete it and Add again because I would avoid having to redo the tab order (unless someone knows how to easily insert something in the middle of the order of tab instead of having to click through all the controls in the correct order)?

  In addition, I don't know if this would affect anything, but the project was originally built with ComponentWorks 1.0, we were forced to move to MStudio when we met a few bugs in CW, so all controls were originally CW controls which have been converted into control of CNi. I doubt that this is so like everywhere else, we changed during controls is not a problem, but I'm ready to try the suggestions.

  Hi JC,.

  I hope you had a good weekend!  I'm glad to hear that you're back running.  Add the extra button was, in fact, causing update the licensing information for the other buttons, as you can imagine.  After further research, I found that the license information are stored only the form of the control, and if this control doesn't change in any way (or in your case, adding a new project), he sees no reason when compiling to recreate a link to the license.  However, after the change of control and a new, it updates the link between the license information, which solved this problem in your case.

  I hope this helps, JC.  Have a great day!

• Replace the file name of the path

  EDIT:

  I'm building an array of strings into a path, but he eventually be not properly formatted.  Perhaps it is a matter of "scan code" with the back-slash?

  

  Is it possible to do better/correct?  I just want to change the file to an already existing path name.

  For example:

  c:\Desktop\Folder\File1.csv

  becomes

  c:\Desktop\Folder\FileName.csv

  My 'spreadsheet chain' is simply a way of existing in the same folder of destination file path to the string .

  I break the old path (a string) in a table separated by the slash.  Can I replace the last element of the array (the name of the file).  Can I make a new table and convert it to a path.  Although it seems correct, LabVIEW generates an error with this path by saying: there is no.

  Looking to do?

  added the path = c;\desktop\folder\filename.csv

  

• Letterhead, that I created for my e-mail shows upward on my copies, but only appears as a white of largce point in the message from the Inbox of cylinder head.

  Op system is Windows XP Pro. I followed all the procedures in the Outlook Express 6.0 for the creation of the letterhead. I checked the HTML box.  What's wrong???

  Is - this "header" a signature?
   
  Note: The HTML Signatures must be less than 4 KB.
   
  Open a new Message window and create your signature. (Insert the graphic & text). Click on the Source tab (view |) Source Edit if not already checked). Highlight the complete source code and copy / paste into Notepad. File | Save under and in the file name field, save as htm, (i.e. Sig1.htm). It will be saved in My Documents by default. Go to tools | Options | Signatures. Click: File | Browse and insert your saved signature | Apply. You can now rename it if you wish.
   
  Of course, if the recipient reads in plain text, they don't see the it.