Disc, defragment and Task Scheduler

Similar Questions

• Event Viewer and Task Scheduler stop working

  I currently have problems with Task Scheduler and the event viewer.  Whenever I open and try to go in a "folder/hive" sub it crashes saying that MMC has stopped responding.

  Now, I tried to use SFC and I tried loading them up to display the MMC. EXE only. Neither of which work.  I tried several restarts and tried running a hotfix, but those who do not work or the other.

  Please could you help?

  As a 'solution' for some issues (not the main question), that's what I had to do:

  Make a fix of the diagnostic system

  First thing I did was run the tool is located at: Microsoft Technical Support

  To help what I can run the tool and used the patches for the problems of two shown, each question can back it up with 2 problem areas, of which only 1 (in the section of windows update) not resolved.

  Run a windows update fixed service

  1. run the CMD commands below:

  net stop wuauserv

  net stop bits

  net stop cryptsvc

  Ren %systemroot%\System32\Catroot2 Catroot2.old

  Ren %systemroot%\SoftwareDistribution SoftwareDistribution.old

  Open the cmd

  2. create a batch file for fix / register some dll files:

  regsvr32 c:\windows\system32\vbscript.dll/s
  regsvr32 c:\windows\system32\mshtml.dll/s
  regsvr32 c:\windows\system32\msjava.dll/s
  regsvr32 c:\windows\system32\jscript.dll/s
  regsvr32 c:\windows\system32\msxml.dll/s
  regsvr32 c:\windows\system32\actxprxy.dll/s
  regsvr32 /s c:\windows\system32\shdocvw.dll
  regsvr32 c:\windows\system32\wuapi.dll/s
  regsvr32 wuaueng1.dll/s
  regsvr32 c:\windows\system32\wuaueng.dll/s
  regsvr32 c:\windows\system32\dllcache\wucltui.dll/s
  regsvr32 wups2.dll/s
  regsvr32 c:\windows\system32\wups.dll/s
  regsvr32 wuweb.dll/s
  regsvr32 Softpub.dll/s
  regsvr32 Mssip32.dll/s
  regsvr32 Initpki.dll/s
  regsvr32 softpub.dll/s
  regsvr32 wintrust.dll/s
  regsvr32 initpki.dll/s
  regsvr32 dssenh.dll/s
  regsvr32 rsaenh.dll/s
  regsvr32 gpkcsp.dll/s
  regsvr32 sccbase.dll/s

  regsvr32 slbcsp.dll/s
  regsvr32 cryptdlg.dll/s
  regsvr32 Urlmon.dll/s
  regsvr32 Shdocvw.dll/s
  regsvr32 Msjava.dll/s
  regsvr32 Actxprxy.dll/s
  regsvr32 /s of Oleaut32.dll
  regsvr32 Mshtml.dll /s
  regsvr32 msxml.dll/s
  regsvr32 msxml2.dll Kbps
  regsvr32 msxml3.dll/s
  regsvr32 Browseui.dll/s
  regsvr32 /s shell32.dll
  regsvr32 c:\windows\system32\wuapi.dll/s
  regsvr32 c:\windows\system32\wuaueng.dll/s
  regsvr32 wuaueng1.dll/s
  regsvr32 c:\windows\system32\dllcache\wucltui.dll/s
  regsvr32 c:\windows\system32\wups.dll/s
  regsvr32 wuweb.dll/s
  regsvr32 jscript.dll/s
  regsvr32 atl.dll/s
  regsvr32 Mssip32.dll/s

  For those who do not know how to do - open a Notepad, copy and paste the above content and save it as "WindowsUpdate.bat".

  Run this batch file

  3. in the command executes the commands below:

  net start wuauserv
  net start bits
  net start cryptsvc
  output

  4 run SFC/scannow in cmd once that has completed steps 1-3 new (including diagnostic tool).

  This allowed me to get the updates of windows working again.

• How to activate and deactivate eve of VISTA Task Scheduler?

  I want to schedule a task in VISTA Task Scheduler that will disable the "sleep mode". Later I want to execute another scheduled task which will again allow mode 'sleep'. Is this possible?

  Hello

  Use the Powercfg command lines and Task Scheduler

  Powercfg
  http://technet2.Microsoft.com/WindowsServer/en/library/0d90be55-CC9D-423d-8e49-8a79a4d6bcd41033.mspx

  Powercfg command-line options
  http://technet2.Microsoft.com/windowsvista/en/library/1d58b934-f56a-4796-b2df-7be2eb9c03bc1033.mspx

  How to create a task in Vista Task Scheduler
  http://www.Vistax64.com/tutorials/132903-Task-Scheduler-create-task.html

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Task Scheduler tasks do not work after a reboot

  In windows 7 I used to have the error that other people get to the Task Scheduler that the task no longer exists. In any case, I have no more errors since the question based on advice on this forum to delete each task which does not exist in the Task Manager, but exists in the attachment folder. If the error that the task no longer exists does not.

  The problem is now task will run once, after that reboot a pc they rerun the habit. He said that the task is scheduled to run at 08:00 on Wednesdays of each week. But after that I restarted my pc it does not work yet. The next section begins to show nothing then.

  The task in services.msc schedule is set to automatic. I should also mention that the service does not seem to me to change if its auto, manual, other services. I believe that I am the admin, I am the only user of this computer, no accounts are put in place, its just me, and I never had problems with the admin.

  Forecasts of the tasks are not that difficult, after I corrected the error, I hoped that would be the end, but no, forecasts of the tasks still does not work, something so fundamental should not cause many headaches.

  Well looks like I found my answer, microsoft does not task scheduler does not work after restarting.

  Here is the original thread, I made mentioned, dealing with my first issue with Task Scheduler showing an error indicating that the tasks no longer exist. This thread has solved the problem that I no longer receive the error that the task no longer exists, but close to the last post on the thread below, someone explains the problem that I have now with the pc, not to remember to perform next time.

  This thread below will fill you in on everything I mention since Task Scheduler, defragment break Task Scheduler.

  And as one person on the States of thread at the end

  "Sorry, Joseph... but it is not the answer." Oh, Yes... you can recreate the tasks that are causing the problem (in my case, something like 25... Count em... 25. created by the system of tasks in Microsoft files). Everything seems fine. Restart now. BLAMMO. You're right back where you started.

  Microsoft: Task Scheduler in W7x64 is BROKEN. Horribly, undeniably BROKEN.  Acknowledge the problem and FIX this MESS. »

  It sums up my thoughts exactly.

  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/01e60fa1-8004-40b4-9cf0-247fb80edb56

• Event Viewer/Task Scheduler error message

  I get the error message "MMC could not create the snap" in Task Scheduler and Event Viewer. I tried various things, including a reinstallation of the .NET Framework, and nothing seems to solve the problem. Does anyone have any suggestions?

  michiganjoe,
  Thank you for visiting the Microsoft Answers community forum.

  The first thing I would try is to run the System File Checker to see if any system files got corrupted:
  To run the System File Checker tool, follow these steps:
  Click Start and type cmd in the box start the search.
  Right click on cmd in the list programs, and then click Run as administrator.
  If you are prompted for an administrator password or a confirmation, type your password or click on continue
  At the command prompt, type the following line and press ENTER:
  sfc/scannow
  When the analysis is complete, test to see if the problem you are experiencing is resolved.

  If this does not work, we need a little more information, the better to help you.  What version of Vista are you using?  When exactly this error happen?  Is that what you see in the event viewer, or you get the error when you try to open the event viewer and Task Scheduler?
  Have changes made to your computer recently, as new hardware or installed software or an update / upgrade to software or drivers?  Have you tried to do a system restore to before the problem came first?
  To restore the operating system to an earlier point in time, follow these steps:
  Click Start, type system restore in the search box, and then click System Restore in the list programs.
  If you are prompted for an administrator password or a confirmation, type your password or click on continue.
  In the System Restore dialog box, click on choose a different restore point and then click Next.
  In the list of restore points, click a restore point created before you started having the problem, and then click Next.
  Click Finish.
  The computer restarts and system files and settings are back to the State they were in when the restore point was created.

  Let us know the status of your problem and if we can also provide assistance.
  Thank you

  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Task Scheduler error: "... task: the task image is corrupt or...»

  When I run the Task Scheduler which exactly follows the error message appears in a popup window: ' task32498346 task: the task image is damaged or has been tampered with. " None of the "solutions" I read on internet activity for me. Very detailed solution from Microsoft Support does work for me because the first step is to go to Task Scheduler Library and find the folder in which the corrupted task is in. I carefully searched the whole library, and there is certainly no 'task32498346' in the Task Scheduler Library. I'm not aware of all this causes me problems. Everything seems to work OK. I came just to have stumbled on this because I was curious how the Scheduler works. I looked in Services and Task Scheduler started. Despite do not cause me problems, I know, I want to get rid of this popup error message. Can someone help me, please?

  (Moved to repair and recovery)

  Yes. The Earth is round. Does this have to do with my question?

  -> OK, I'll specify it in detail. You must search for the folder C:\Windows\System32\Tasks of the existence of the file that generates the error message, i.e. task32498346. The file may be hidden.

• Task Scheduler error-' the selected task "{0}" no longer exist. " To see the current list, click on refresh. »

  Once I made a few changes in Task Scheduler. After rebooting my system, I found that explorer.exe starts not and task scheduler does not run. So I did system restore. After that things seems to work very well. But when I started the Task Scheduler. It gives following error.
  "The selected task"{0}"no longer exist." To see the current list, click on refresh. »
  Task status: data read failed
  Active the task: cannot read data
  It seems that it is impossible to read any coz task defined window, it shows no defined task window. When I explore the folder in the list of directories of Task Scheduler it shows that no task instead gives the same error.
  "The selected task"{0}"no longer exist." To see the current list, click on refresh. »
  When I click on "Create basic task" of the Action it gives the following error
  "The Task Scheduler service is not available or the folder does not exist. "Verify that the service is running and what folder.

  Hello

  The following items have the steps to fix the respective errors:
  Error code 412
  Error code 413
   

• Task Scheduler does not start

  While I was trying to schedule a backup, I came across the error 0 x 80070032. I found that I needed to ensure that the event log Windows and Task Scheduler were both works. Well Windows event log is fine and is implemented for the automatic. However, Task Scheduler is not started but is always implemented for the automatic. I tried to start it and I got this message:

  Services Scheduler task on the Local computer started and then stopped. Some services stop automatically if they are not in use by other services or programs.

  I opened the tΓches and get to reading data does not for what I'm trying to do. I've never used before Task Scheduler. I'm running Windows 7 Pro, if that helps anything.

  Found a fix.

  Go into your registry and delete the following key

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Schedule\TaskCache

  Please make sure that you back up the key before deleting.  If you are unsure how to do this I do not recommend doing.

  Reset.  Profits.

• Task Scheduler works with scripts created in open Script?

  I am to evaluate whether the Script Open eTester 8.2 is needed. One consideration is that we use the Task Scheduler and it does not seem to recognize all of the scripts that I have recorded in open Script. I use Task Scheduler that comes with the download of the v9. I understand that I could use the new etester which is included with the v9 but I heard that product may disappear in the future and this open Script is his replacement. Rumor?
  
  Thanks for any help,
  Jeff

  Hello

  OFT installer contains the Task Scheduler and task scheduler does not come only as far as I know. When you try to perform a custom installation of the OATMEAL package wouldn't see you Task Scheduler as a separate entity. If this works with the OFT or etester.

  You can use the Oracle Test Manager to run and schedule jobs to open script.

  Thank you

  Published by: Openscript user 100 on November 17, 2009 20:47

• Task Scheduler service fails, so I am unable to defragment my hard drive.

  original title: Task Scheduler service does not start

  OK, I have some stability issues with my new win 7 OS and I want to remedy. to do this, I would like to solve any potential problems which can cause my system crashes.

  I check the logs and noticed that the Task Scheduler service is not running. for newspapers of sistem registry errors and i cannot defragment my hard drive.

  So how do you start the Task Scheduler service? When I press the Start button service, I get an error. This is a perforated Cap.

  http://I27.Tinypic.com/2rp4mm8.PNG

  Try to do a repair installation;
  1. Insert the DVD of Windows 7
  2. restart your computer
  3. When asked if you want to boot from your DVD player, do it.
  4. Select your language, click Next.
  5. click on "repair your computer".
  6. Select the operating system you want to repair.
  Andre Da Costa http://adacosta.spaces.live.com http://www.activewin.com

  I don't have the possibility to repair the operating system or select one as you suggested in step 6. I have and here is a picture of the dialog box http://www.sevenforums.com/attachments/tutorials/1010d1227511616-startup-repair-repair.jpg

  EDIT: Here is the solution I found: http://social.technet.microsoft.com/Forums/en-US/itprovistasp/thread/0c438376-1486-4ae4-9847-2de7a8767f27

• can not defragment, task scheduler not started, but it's

  Running Windows 7 Home Premium. When I try to run Defrag, I get the message that it will not run because the Task Scheduler service is not started. When I check the Task Scheduler service, that it IS running and the game runs automatically. What should I do to solve it?

  Jim T

  I solved the problem by going to Tools\Defragment Administrative and optimize readers. I could then manually run Defrag and also restore the defragmentation task that was missing in Task Scheduler. Everything is OK now. Thank you for your return to me.

  Jim T

• Try to run Defrag/Task Scheduler Service, get the message 'Task Scheduler Service does not work' in Windows 7

  I'm trying to defragment my system (Windows 7).  When I go to START and type in "Defragmenter" it states: "the Task Scheduler Service does not work.  "Start the Task Scheduler Service and try again.  When I do, the following message appears: "the remote computer is not found.  Please tell us what to do next.  Thank you.

  Task Scheduler, Windows event log, and the RPC end Point Mapper are included to start automatically?

  Click on the Start button and select Control Panel, administrative tools, Services. Locate the Windows event log in the list. Check that he started and that the startup type is automatic. If it is not set to automatic, right-click and select Properties, general tab. There is a box after the startup type. The options are available in a menu drop-down by clicking on the down arrow to the right of the box. Make the change and click apply and then click OK. Restart the computer and verify if it has started.

• When I open Task Scheduler and click on MSE for planning, I get the following warning. General Page initializatin has no 0 x 80070534

  Original title: Task Scheduler

  When I open Task Scheduler and click on MSE for planning, I get the following warning.

  General Initializatin page failed,

  The specific error is:

  0 x 80070534: no mapping between account names and security IDS was done. Year error has occurred trying to retrieve task account informaiton. You can continue to edit the subject of the task, but will not be able to change task account information.

  I then press the ok button and it goes to the task, schedule, and the settings box.

  When I check in scheduled tasks, to see if they ran as planned, the last run time column NEVER said, and the status column indicates

  COULD NOT START.

  In the morning, I always get this error message:

  A task could not run...

  Do you know what I'm doing wrong? Can it be fixed?

  Thank you Tim

  Is there a password the user account in which the task is scheduled?  You cannot schedule a task to run under a user without password account.

  You can also take a look at advanced > view the log window scheduled tasks.

• I used chkdsk after trying to do a defrag and send a message that there was an error on the disc.

  original title: computer Dead after chkdsk

  I used chkdsk after trying to do a defrag and send a message that there was an error on the disc.  Asked me to use chkdsk after a statup as a volume is in use.  I did it but when I went through the suite, the computer was completely dead.  I think I gave the wrong settings of the chkdsk command.  How can I get my computer operational again?  I use Windows XP

  What do you mean by 'completely off '?  Is - literal?  All in all, nothing happens when you restart the computer?  No noise?  No fans? No beeps?  No video, no BIOS or POST information appear?

  John

• No mapping between account names and security IDS made mistake by attempting to use the Task Scheduler

  I have noticed that my msfeedssync.exe were not working or updated so I went to the Task Scheduler to see what was going on and received the number above mapping between user names and security ID error I never use Task Scheduler, but I do not know its also used for RSS updates , I do all my own maintaince so I need only of GI RSS using a 3-year-old dimensions of dell with xp pro and its in tip top except for that shape it came only with a 80 GB hard drive and I've only used 20 concerts in 3 years that I use online for things important and backup storage I hope there is a solution for this because I installed ram to 4 GB and it has a 2.8 ghz Processor blazin fast and is in very good shape all help will be appreciated thanks

  Hello syncere99,

  1. What is the user account in the Task Scheduler are you for the work you are trying to use the Task Scheduler?

  The error code indicates that the user account that was used to create the job no longer exists. This could be because the user account is deleted. I suggest that you remove and re-create a job and check if you have the same problem.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.