Creation of a SpanElement of the current selection

Similar Questions

• Click here to follow the link opens in the currently selected tab

  FF17.0.1 (also ff16)
  Click here to follow the link (for example, a link in an email) opens in the currently selected FF window (which is a real pain) I don't know it used to open in a new tab
  CTRL-click here to follow a link from MS word opens in the existing tab

  Tools-> Options-> tabs-> open new window in a new tab is checked

  I think I've had this problem before and done away with by unchecking this option, FF opening and closing and then new FF, however, if I try this, when I restart FF, the option is always checked. (Maybe a clue?)

  The problem occurs if FF started in safe mode
  It is not possible to ctrl-click on the link in outlook (I guess that OUtlook must deactivate that)
  I don't have a mouse with a central button

  Make a right click Open in new tab works fine
  Right click Open in a new window is fine

  Information system
  ThinkPad R60 3 GB RAM
  Windows 7 + latest updates
  Windows Firewall
  Malwarebytes Anti-virus

  For links opened by an external program, you can use this pref to substitute the browser.link.open_newwindow pref if this pref is not the default of-1.

  • Browser.Link.open_newwindow.override.external
  • http://KB.mozillazine.org/browser.link.open_newwindow
  • http://KB.mozillazine.org/browser.link.open_newwindow.restriction

• To access the currently selected keyframes

  Is there a way to access the keyframes selected currently through javascript?  I'm writing a GUI which will stick the currently selected keyframes (or copied keyframes could work too) on a layer specified user when you press a button.  And secondly, is it possible to have all the additional attributes, such as ease in deceleration example?

  Thanks in advance!

  Indeed, I wrote this from memory and it's fake...

  It is: position.keySelected (idx);

  and in general the syntax to read a something key is myProperty.keyXxx (idx);

  and not what I wrote. I'm sorry.

  But well, if you have access to the table of methods in the guide of script... they're all here.

  Xavier.

• How to get the current selected action.

  Hello

  I would get the currently selected action.

  Please refer to the image below. Vignette (selection) is selected.

  Is there a script that I could use to get the which?

  Your help is very appreciated.

  

  getSelectedAction()
  function getSelectedAction(){
      var ref = new ActionReference();
      ref.putEnumerated( charIDToTypeID("Actn"), charIDToTypeID("Ordn"), charIDToTypeID("Trgt") );
      try{
          var desc = executeActionGet(ref);
      }catch(e){ return; } // no action selected
      var selectedName = desc.getString(charIDToTypeID("Nm  "));
      var selectedIndex = desc.getInteger(charIDToTypeID("ItmI"));
      var parentName = desc.getString(charIDToTypeID("PrNm"));
      var parentIndex = desc.getInteger(charIDToTypeID("PrIn"));
      if(isActionSet( parentIndex, parentName )){
          var setName = parentName;
          var actionName = selectedName;
      }else{
          var setName = findAction(parentIndex, parentName );
          var actionName = parentName;
      }
      return [setName,actionName];
  };
  function isActionSet( parentIndex, parentName ){
     var res = false;
     try{
        var ref = new ActionReference();
        ref.putIndex( charIDToTypeID( "ASet" ), parentIndex );
        var setName = executeActionGet( ref ).getString(charIDToTypeID("Nm  "));
        if(setName == parentName) res = true;
     }catch(e){}
     return res;
  };
  function findAction(parentIndex, parentName ) {
    var i = 1;
    var found = false;
    while (!found) {
      var ref = new ActionReference();
      ref.putIndex(charIDToTypeID('ASet'), i);
      var desc;
      try {
        desc = executeActionGet(ref);
      } catch (e) {
        break;
      } finally {
      }
      if (desc.hasKey(charIDToTypeID('Nm  '))) { ;
        var setName = desc.getString(charIDToTypeID('Nm  '));
          var ref = new ActionReference();
          ref.putIndex(charIDToTypeID('Actn'), parentIndex);
          ref.putIndex(charIDToTypeID('ASet'), i);
          try{
          var adesc = executeActionGet(ref);
          var actName = adesc.getString(charIDToTypeID('Nm  '));
          if(actName==parentName) return setName;
          }catch(e){}
        }
      i++;
      }
  };
  

• New file depending on the size of the current selection?

  Is there a way to make a new file based on the current selection?

  Copy the selection to the Clipboard.

• Is it possible to get the current selection?

  catalogue: getTargetPhotos () returns an array of selection photos or film if nothing is selected. catalogue: getTargetPhoto() returns only non-neant if something is more selected.

  Is it possible to get a real choice?

  The methods of selection are indeed confusing.  This function returns the current selection, or empty if there is no selection in the array:

  getSelection () function

  If catalog: getTargetPhoto () then

  back catalogue: getTargetPhotos)

  on the other

  return {}

  end

  end

• How to read or get the current selected value of selectonechoice

  How to read or get the current selected value of selectonechoice, so that it can be used in the custom query.
  
  selectOneChoice11.getValue () m:System.NET.SocketAddress.ToString () returns the index of the list.
  
  from 0 - number of values in selectonechoice.
  
  I want to read the exact value of selected.
  
  Concerning
  
  Niaz M

  Why don't you try this?

  Re: Value of SelectOneChoice in valueChangeListener

  Both approaches will work...

  Julian

• Is it possible to get the currently selected clipitem?

  Heya folk from Adobe,

  Is it possible to get the clipItem currently selected in the active sequence, something like this:

  app.enableQE ();

  project var = qe.project;

  Project.init)

  curSeq = project.getActiveSequence ();

  curSeq.getSelected () # does not exist, I'm looking for a way to do this

  It is a high priority for me.

  Thank you!

  Raphael

  I appreciate your optimism about what is in the API, but it only no concept of selection (other than, 'what sequence is currently active").

  I'll add your vote to the feature request (already very popular), "to provide current information of project selection and sequence.

• change the current selection to a subset of the current selection

  Hello

  I wonder how can I change/modify a current selection and then have 2 images selected for the new selection. I have the full path of these 2 images (but I do not have their UUID).

  Background:

  From a selection provided images of the film (not a set of collection), a plug-in retrieves full-paths-file names in a list for external treatment (works fine).

  Error handling: by mistake, the user can include images which should NOT be dealt with in the previous step. The first occurrence of differring from image by selected error which should not be treated is captured by a simple comparison with the previous image. The two full path names of files are extracted and displayed in an error message. Then plugin stops further processing of selected images, Lightroom is back to where he started, the choice of the film remains unchanged.

  Objective:

  What I want is that when process prevents the selection changes the 2 images that have been identified as different.

  In fact different occurrences are captured by the labels and ratings only.

  if varFLabel ~= varFLabel_comp then
  

  and

  elseif varFRating ~= varFRating_comp then
  

  Here's the code I'm working on that:

  LrTasks.startAsyncTask( function()
  local photos = catalog:getTargetPhotos()
  ...
  for j, photo in ipairs(photos) do
            varFLabel = photo:getFormattedMetadata('label')                    --word eg. approved
            varFRating = photo:getFormattedMetadata('rating')                    --number
            if lrItem > 1 then                    -- second pass of 'for ... do'
                      --catch missmatching Labels in selection by user
                      if varFLabel ~= varFLabel_comp then
                                LrDialogs.message(string.format("Labels missmatch!\n %q Not equal to %q", varFileName_comp, varFileName, "DIFF Labels", "info"), "Labels do NOT match!\nDouble-check your selection!\nStopping task and script!")
  --new selection to show the two differing images in: varFileName_comp varFileName
                                return          --exit script
                      --catch missmatching Ratings in selection by user
                      elseif varFRating ~= varFRating_comp then
                                LrDialogs.message(string.format("Ratings missmatch!\n %q Not equal to %q", varFRating_comp, varFRating, "DIFF Ratings", "info"), "Ratings do NOT match!\nDouble-check your selection!\nStopping task and script!")
  --new selection to show the two differing images in: varFileName_comp varFileName
                                return          --exit script
                      end
            end
            --prepare for next comparison in 'for ... do' 
            varFileName_comp = varFileName
            varFLabel_comp = varFLabel
            varFRating_comp = varFRating
  end
  end)
  
  

  Tried to make use of the setSelectedPhotos function but I don't get any internal processing error results only and do not know how to proceed.

  I suppose that this function requires that the LrPhotoID derived from the selected Photos (table) table.

  photos = catalog:setSelectedPhotos( varFileName, varFileName_comp )
  

  Edit: This command selects a different images

  return catalog:setSelectedPhotos( photo, {} ) --exit script
  
  

  I hope someone can help.

  Post edited by: snahphoto

  If you hold a second through the iteration variable, photo_comp, which is the value of 'photo' of the previous iteration in the loop, so you could do:

  back catalogue: setSelectedPhotos (varPhoto, {, photo_comp})

• How can I return at the beginning of the current selection?

  The hearing 3 and earlier versions, if I wanted to hear the audio selected, I made the selection in the Waveform Editor, you press Play and the selection would play.  He would play the same selection again if I stopped reading and press Play again.  CS5.5 and 6 that appears not to work the first time you press Play after selecting some audio.  After that, the audio is just resumes since when he arrested him.

  Is it possible to get the current time indicator to return at the beginning of a selection?

  Robert

  I find that it is quite consistent in his behavior. But if you want to study the possibilities, go in Edition > Preferences > reading and you have several options of course altering it.

• Additional mouse click required to set other combo box values based on the current selection combo box

  I have an Acrobat PDF form where there are 8 combo boxes (not editable) which are related in a logical way, but have unique names and a list of unique values, with the exception of a default value that represents 'null' or 'none '.

  for example:

  The first 1 combo box value is "none" followed by the value A1, B1, C1, etc., and Combo box 2 the first value is 'none' followed of the values A2, B2, C2, etc...

  The combined list useful values for every combo boxes relate to the types of unique product for the user to select mode 'radio button '.

  When the user selects one of the 8 Combo boxes and performs one selection other than 'none', then the form must verify the 7 other combo boxes and when any current value is not equal to 'none', he has to change 'None '.

  The following script is currently enrolled in the properties of "Actions - Mouse Run - Up a Javascript" from one of the drop-down list boxes, others have similar scripts as well.

  (var cbox is the current combo box and var obox is for other drop-down list boxes when called).

  Cbox var = this.getField ("TagStyleStake");

  If (cbox.value! = "none")

  {

  obox var = this.getField ("TagStyleBasket");

  If (obox.value! = "none")

  {obox.value = 'none' ;}

  Obox = this.getField("TagStylePushon");

  If (obox.value! = "none")

  {obox.value = 'none' ;}

  Obox = this.getField("TagStyleHandle");

  If (obox.value! = "none")

  {obox.value = 'none' ;}

  Obox = this.getField("TagStyleHang");

  If (obox.value! = "none")

  {obox.value = 'none' ;}

  Obox = this.getField("TagStyleBlank");

  If (obox.value! = "none")

  {obox.value = 'none' ;}

  Obox = this.getField("TagStyleMolded");

  If (obox.value! = "none")

  {obox.value = 'none' ;}

  Obox = this.getField("TagStyleSignage");

  If (obox.value! = "none")

  {obox.value = 'none' ;}

  }

  The current problem is that, when a Combo is selected and one option other than the 'none' value is clicked, the other combo boxes do not include the 'None' value.

  To reset the other combo boxes requires another click on the option which has just been moved to the position selected in the drop-down list, but it seems reasonable that the drop-down list boxes should reset with the initial click the option in the drop-down list.

  I tried other properties (Format, validate, Calculate) but without success.

  What I'm missing here?

  The normal way to proceed is to define "value option selected to validate immediately" and to place the code in the event of the combo box button. And instead of the first two lines you have, you need to use something like:

  If (! event.willCommit & event.changeEx! == 'none') {}

  Your other code goes here

  }

  The changeEx property returns the value of exports, if any, for the selected item.

• View and edit the currently selected line of ADF Table in the form of ADF

  I have an ADF Table read-only and the shape of the ADF, which were created from the same data control.
  I need to be able to edit the selected table in the form line (as in the 'Controls data binding to your JSF page' part of 'Development of RIA Web Applications with Oracle ADF' tutorial). However, I can't figure out how to make :(
  
  I found the following solution on the Web: #{bindings. DeptView1.currentRow.dataProvider.dname} - but it does not, since "the oracle.jbo.server.ViewRowImpl class does not have the dataProvider.
  
  Sorry for the newbie question.
  Thanks in advance for any help!

  Hello

  As far as I KNOW, the dataProvider only is not supported on ADF BC, where the error.

  If you have created the table on my own reading of the ADF and the form of the same data control simply refresh the form based on the table selection is displayed recording selected, for which this just add partialTriggers property to the panelFormLayout and set its value to the id of table

  Jean Lou

• WARNING the current selection

  If it is possible there is a way to see if a selection is present or not

  I wish the script needs to do this job:

  If the selection and that must start an action

  If not, and it should review that the selection is not present.

  Thank you

  Alert (hasSelection());

  selection control.

  hasSelection() {} function

  ref10 var = new ActionReference();

  Ref10.putProperty (stringIDToTypeID ("Property"), stringIDToTypeID ("selection"));

  Ref10.putEnumerated (charIDToTypeID ('Dcmn"), charIDToTypeID ('Ordn'), charIDToTypeID ("Trgt'));

  var docDesc = executeActionGet (ref10);

  Return docDesc.hasKey (stringIDToTypeID ("selection"));

  };

• Show/hide panelFormLayout based on the current selection of selectOneChoice

  Hey all,.

  I have a relatively basic question, I'm looking for a clear answer.

  I have a layout with the following structure:

  JSP:root

  AF:panelFormLayout

  AF:panelGroupLayout

  -component selectOneChoice

  AF:panelFormLayout

  AF:panelGroupLayout

  ADF - components

  AF:panelFormLayout

  AF:panelGroupLayout

  ADF - components

  AF:panelFormLayout

  AF:panelGroupLayout

  ADF - components

  I'm looking for the easiest way to show/hide the 3 children of panelFormLayout based on what is selected in the selectOneChoice component.  I've hard-coded these values and set their values like "1, 2, 3" respectively.

  I've already tried defining a ValueChangeListener on the selectOneChoice component, but when I run the page and change the value - it doesn't seem to be hitting my method when I select something.

  Any help would be appreciated.

  JDev Version is 11.1.1.7

  Please add autoSubmit true on the selectOneChoice element and try, it will hit valueChangeListener.

  Also, you can set three PFL render property conditionally in your VCL and make a real at the same time.

  Thank you

• Same Audio Clip: "cannot synchronize one or more elements in the current selection because a match is not found.

  So I recorded a one-piece multicamera Setup.  I recorded audio separately from an external source.

  I turned view individual compisitions of each camera.  I then manually sync had my external audio by aligning alogn original audio wave forms.  Once I him I had lined up perfectly, I deleted audio of the original camera in the composition (to only use my external audio clip)

  I went and had already done with the same exact audio file for each camera view (in their own compositions).  I even standardized tham all to the same heights-6.  Thus, they are literally all of the same audio data.

  However, when I go to merge all of these compositions in a multicam composition (audio) via - I get this 'cannot synchronize' - which I don't really understand because I literally use the same audio clip on each of them.

  I tried to clear my cache of media and delete the cache files from media like another post said, but it was without result.

  Any reason, why this happens?  I tried to follow the channel 1, follow the channel 2, track down mix channel. all the same.

  Here's what to look like my comps:

  

  Ahhh I think I got it.

  Through Google more on this subject, I found an old post of you actually.

  That's your answer for someone else who sees this thread:

  In order to cut a multicam project using the multicam monitor, which is by far the simplest method, then you will need to use nested sequences.  There is no way around that.

  You can cut without the multicam monitor if you want, but I find it much less effective.

  There are different methods of creating a nested sequence multicam.  A large number of tutorials and even the focus of help file on the automatic mode, but I think it's lack and opportunity, problematic.  I prefer to do things manually.

  1. create a sequence corresponding to your images.

  2. Add the clips and synchronize them manually.

  3. create a second sequence corresponding to your images.

  4. the first sequence in the second nest.

  5. right click this sequence of nested, then select multicamera > activate...

  Thank you.  They have really should let more people know this method.  I thought the compiler auto was the only way to do it, I would rather manually this way