Creation of an existing group PS4000 and PS6010 - just checked.

Similar Questions

• Add the new PS4100 to an existing group

  Hello

  anyone would be able to explain the process of adding a new table to an existing group, please?

  We have a new PS4100 which was delivered with the 7.0.15 Firmware but the Group has a range of PS4000 on Firmware 8.0.5.

  How can I upgrade the firmware on the new PS4100 before running the Setup utility?

  Thank you very much

  Tom

  Let the new Member to join an EMPTY pool as the "default" (its still a void in our environments) or create an and name the program installation or maintenance.

  If the table has joined this pool complete the configuration as Ports IP/network, RAID level and so on. I prefer a complete reconstruction and not a fast initialization, but it's your choice. Updated the FW and also check the FW drive.

  Try to ping the new IP addresses of existing hosts and if everything is OK, move member in your production area.

  Kind regards

  Joerg

• Migration of the existing groups of port DVS vSwitch

  Hey guys,.

  I am looking for a good article, but so far I don't have if existing port a groups with std vSwitch ESXi can I migrate to a newly created DVS.
  I saw VMs, Assistant network management, but it seems that I have to create all the groups before port.

  Is this really the case? as I have 70 groups of ports and I don't want to do the job manually.

  Any suggestion?

  Thanks in advance

  Evening,

  This process can be script but yes destination port groups must be created first.   I suggest to use the Onyx project to get the commands in powershell to create groups of ports.  Personally, I have 700 groups of ports and I understand your pain.   Onyx will allow you the creation of a port group unique in powershell then all you need to change is the name and vlan id.   If you have the standard naming, you should be ok...

  Let me know if you have any additional questions or I missed your question.

  Thank you

  J

• Merger of two existing groups

  Hello

  We would like to migrate a R50 PS6100 1 GB for an R6 PS6210 10 GB volumes both have currently existing volumes. Is it possible for two existing groups to join, migrate PS6100 to PS6210 volumes and continue to use the volume PS6100 group.

  Robert

  Hello

  I'm sorry but there is no option 'group fusion.  Mixing 10GbE and members GbE in the same group is very hard to do safely.  According to the amount of free space you have on the table of 10GbE you can replicate from one to the other. (Assuming that the levels compatible firmware), can promote the replica and connect.

  Otherwise, you would have to migrate data at the level of the host.

  Kind regards

  Don

• Adding table to an existing group

  I am trying to remote installation wizard allows you to add a PS6210x to an existing PS6000 with a PS6210xs group. I have successfully added tables the same group with RSW in the past, but I get an error this time on a bad group password. I logged in with this password manager, so I know that it is correct.

  The new table has firmware 8.1 and tables in the existing group always run 7.1.x. Is it possible that in fact is the problem and I just need to update the old firmware to table first?

  Thank you.

  1. you use the user 'grpadmin' to connect to the GroupMgr, but this password may be another. Especially over a long period a customer may change the password for grpadmin but forget to change the GroupPW.

  Within GrpMgmr klick on group-> Member-> Set Password to set a new GroupPW. You don't need to know the old man!

  2. Yes, at the end of the day all members must be at the same level of FW, but this should not be your problem right now.

  We upgade existing members first of all for the course prior to FW, adding new members. We are also new members in a 'maintenance' pool to be sure that no data migration starts automatically.

  Kind regards
  Joerg

• CS-MARS: connecting custom to existing groups-events events

  Hello

  I created a custom event in the framework to work with custom parsers (which works very well in most of the cases).

  I want to add this event customized to an existing group of events. This would be important because every time the custom event produced the existing rules (were the event group is used) would be returned and would create an incident.

  If the custom event will not be added to the existing event groups, I'll never get an incident because no rule will match (no existing

  rule uses my new event).

  is it possible to add my event customized to an existing group?

  Thanks so much I have an idea to solve my request.

  Kind regards

  Bernhard

  Sorry, you cannot change the event groups. This is why it is so important when creating analyzers to use existing events when possible. If there is an existing event that even approaches which means the same thing, you might be better to use it. Otherwise, you must create a custom control rule to process the custom event.

• Service Division of Hyperion - assign the existing group to the new group

  Hi all
  
  In my planning application, I tried to create the new group "G3" through the sharing service and assigned existing groups ("G1", "G2") to the new group "G3". So that all existing group access will be transferred to the new group.
  
  But when I logged with the user of the G3, I found has insufficient access forms data giving the message.
  "You try to open the data form, but can not because all the required dimensions are not present." Possible causes may be that you do have at least one member of a required dimension, or the selection of members resulted in no Member present. Contact your administrator. "
  
  I can able to connect and see the dataform with user group G1 and G2.
  
  What that should I need to change in the settings to avoid this problem?
  
  Thanks in advance

  When you add a G1, G2 to G3 provisioning of g1 and g2 doesn't apply to the g3. Instead, it's the other way around. G1 and G2 will have some G3 has commissioned.

• How to modify a Virtual Machine DRS existing group?

  Hello

  I use DRS-rules to place virtual machines to a host selected in a Cluster group.

  The poblem is that I did not find methods to change (add new virtual machines) to an existing group of DRS 'Virtual Machine '.

  As far as I know, the configuration is stored in $ClusterView.ConfigurationEx.Group

  Any ideas?

  Thank you!

  Hi Willibald,

  I did some research in the VMware vSphere SDK and made two functions Get-DrsGroup and VmToDrsGroup Add to add one or more virtual machines to a ClusterVmGroup. Some examples of how to use these function exists in the code. If you have added these features to your PowerCLI session, you can use Get-Help to get information about these functions. And also for the examples. For example Get-Help add-VmToDrsGroup-full.

  Function Get-DrsGroup {
  <#
  .SYNOPSIS
  Retrieves DRS groups from a cluster.
  
  .DESCRIPTION
  Retrieves DRS groups from a cluster.
  
  .PARAMETER Cluster
  Specify the cluster for which you want to retrieve the DRS groups
  
  .PARAMETER Name
  Specify the name of the DRS group you want to retrieve.
  
  .EXAMPLE
  Get-DrsGroup -Cluster $Cluster -Name "VMs DRS Group"
  Retrieves the DRS group "Vms DRS Group" from cluster $Cluster.
  
  .EXAMPLE
  Get-Cluster | Get-DrsGroup
  Retrieves all the DRS groups for all clusters.
  
  .INPUTS
  ClusterImpl
  
  .OUTPUTS
  ClusterVmGroup
  ClusterHostGroup
  
  .COMPONENT
  VMware vSphere PowerCLI
  #>
  
    param([parameter(Mandatory=$true, ValueFromPipeline=$true)]$Cluster,
          [string] $Name="*")
  
    process {
      $Cluster = Get-Cluster -Name $Cluster
      if($Cluster) {
        $Cluster.ExtensionData.ConfigurationEx.Group | `
        Where-Object {$_.Name -like $Name}
      }
    }
  }
  
  Function Add-VMToDrsGroup {
  <#
  .SYNOPSIS
  Adds a virtual machine to a cluster VM DRS group.
  
  .DESCRIPTION
  Adds a virtual machine to a cluster VM DRS group.
  
  .PARAMETER Cluster
  Specify the cluster for which you want to retrieve the DRS groups
  
  .PARAMETER DrsGroup
  Specify the DRS group you want to retrieve.
  
  .PARAMETER VM
  Specify the virtual machine you want to add to the DRS Group.
  
  .EXAMPLE
  Add-VMToDrsGroup -Cluster $Cluster -DrsGroup "VM DRS Group" -VM $VM
  Adds virtual machine $VM to the DRS group "VM DRS Group" of cluster $Cluster.
  
  .EXAMPLE
  Get-Cluster MyCluster | Get-VM "A*" | Add-VMToDrsGroup -Cluster MyCluster -DrsGroup $DrsGroup
  Adds all virtual machines with a name starting with "A" in cluster MyCluster to the DRS group $DrsGroup of cluster MyCluster.
  
  .INPUTS
  VirtualMachineImpl
  
  .OUTPUTS
  Task
  
  .COMPONENT
  VMware vSphere PowerCLI
  #>
  
    param([parameter(Mandatory=$true)] $Cluster,
          [parameter(Mandatory=$true)] $DrsGroup,
          [parameter(Mandatory=$true, ValueFromPipeline=$true)] $VM)
  
    begin {
      $Cluster = Get-Cluster -Name $Cluster
    }
  
    process {
      if ($Cluster) {
        if ($DrsGroup.GetType().Name -eq "string") {
          $DrsGroupName = $DrsGroup
          $DrsGroup = Get-DrsGroup -Cluster $Cluster -Name $DrsGroup
        }
        if (-not $DrsGroup) {
          Write-Error "The DrsGroup $DrsGroupName was not found on cluster $($Cluster.name)."
        }
        else {
          if ($DrsGroup.GetType().Name -ne "ClusterVmGroup") {
            Write-Error "The DrsGroup $DrsGroupName on cluster $($Cluster.Name) doesn't have the required type ClusterVmGroup."
          }
          else {
            $VM = $Cluster | Get-VM -Name $VM
            If ($VM) {
              $spec = New-Object VMware.Vim.ClusterConfigSpecEx
              $spec.groupSpec = New-Object VMware.Vim.ClusterGroupSpec[] (1)
              $spec.groupSpec[0] = New-Object VMware.Vim.ClusterGroupSpec
              $spec.groupSpec[0].operation = "edit"
              $spec.groupSpec[0].info = $DrsGroup
              $spec.groupSpec[0].info.vm += $VM.ExtensionData.MoRef
  
              $Cluster.ExtensionData.ReconfigureComputeResource_Task($spec, $true)
            }
          }
        }
      }
    }
  }
  

  Best regards, Robert

  I changed the error handling logic in the Add-VMToDrsGroup function.

  Post edited by: RvdNieuwendijk

• I can't send messages, whatsapp for group discussions and I think that is the update of ios software that is not compatible with my iphone 5 s

  I can't send messages, whatsapp for group discussions and I feel really lost. my friends can't receive my message and I am only able to send individual text messages. I think that its because of the version update of ios which is not compatible with my iphone 5 s. is a solution to this problem?

  I have the same problem, started this morning.

  I'm in iOS 9.1, using the iPhone 6. Don't know what happened, but I have also opened a disturbance with Whatsapp support as well.

  A focus group work, group chat messages cannot be delivered. Individual messages are working properly. I tried to remove and reinstall the application, remove the discussion group and recreate, all has not helped.

  A lack of ideas.

• I would take my existing Server 2008 and upgrade to Server 2012 and the purchase of a virtual server in a data center

  Original title:

  Virtualization server 2012

  I got too many answers to this question. I need the correct answer before buying any CALs galore.

  I would take my existing Server 2008 and upgrade to Server 2012 and the purchase of a virtual server in a data center. I have 25 computers that need to communicate with the server throughout the day, all the different machines. I want to know the best option without breaking the Bank. I permit the data center included in the package to my server.

  Try asking in the Windows Server forum:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• What are the differences between the services and site domain group policy and group policy?

  What are the differences between the services and site domain group policy and group policy?

  Server must wonder about the Technet site.  http://social.technet.Microsoft.com/forums/en-us/home

• How to add contacts to your existing groups or how to manage your groups?

  Anyone know how to add contacts to your existing groups or how you manage your existing groups. How do you even add new groups I can't find a way to do this in the ocntacts.

  Hello

  1. what version of Windows is installed on the computer?

  2 are. what groups you referring?

  3. What mail client do you use?

  If you use Hotmail, you can post your request in the Windows Live Forum.

   

  http://answers.Microsoft.com/en-us/windowslive/Forum/Hotmail

  You can check the link:

  http://Windows.Microsoft.com/en-us/Windows-Live/Mail-import-backup-restore

   

  Please get back to us with the above information so that we can help you accordingly.

• How to convert Outlook Express to Outlook without losing files or existing e-mails and taking my contact list with me?

  original title: change of e-mail

  How to convert Outlook Express to Outlook without losing files or existing e-mails and taking my contact list with me?

  Hi KennethPickering,

  You can refer the following Microsoft Knowledge Base article and check.

   

  How upgrade from Outlook Express to Outlook

  http://support.Microsoft.com/kb/287073

  Let us know if it helps.

• Whenever I insert a USB in my PC is not autoplay, I do not have available to all group policy, and I can't read or write CD/DVD

  Original title: "Autoplay, group policy and CD/DVD"

  Hello

  I have two questions actually worry,

  First of all, I have Windows Vista Home Premium Service Pack 1 installed on my PC

  My first problem is that whenver I insert a USB in my PC it doesn't autoplay and the option is not available at all even when I get clich the drive itself, I went Microsoft support and installed security update 950582 and still no hope. I also can't find the NoDriveAutoRun or NoDriveTypeAutoRun in the registry because I don't have the key explore in both policies.

  In addition, I have not available to all group policy.

  My second question is that I can't read or write CD/DVD even if I have the driver installed, I tried the DVD Microsoft repair but it shows that the repair failed.

  Thanks in advance and hope to receive a solution soon.

  SAS ING.

  Hi Sas Eng,

  There are a few solutions to the question of automatic playback on the following link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-AutoPlay-problems

  And if the solutions provided for the DVD ROM Lorien did not help, as you say, it is probably a hardware fault.

  Try the steps are on the link and let me know if it helps!

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to get a handle to the window to screen using just group id and the id of the window?

  Hello

  We are trying to develop a video application, and we use ForeignWindowControl to display the video on the screen.

  We have those ForeignWindowControl declared and defined in a QML file that appears as needed.

  Using the CameraAPI, we are able to get local video displayed correctly on the local video ForiegnWindowControl. For this we have just the window group id and the id of the window api camera and it automatically configures the window newly created by the camera to the position API and the size defined in the QML file.

  However, this is isn't the case with the video remotely. Since there is no method/function similar to the createViewFinder of the camera api, we need to create a new window of ourselves that goes under the Group shared by the ForeignWindowControl remotely, using screen_create_window_type and set all the required parameters.

  To view the video, hard-code manually the position and size of the newly created window so that it corresponds to the position and the size of ForeignWindowControl remote in QML file and is displayed correctly.

  My question is how to find the ForeignWindowControl using just the group id and the id of the window? the way in which the cameraAPi done in-house?

  Any help would be appreciated.

  Thank you.

  There are 3 ways to associate a window with a ForeignWindowControl.

  1 tell the ForeignWindowControl to expect a window with a given windowId.  Then after that libscreen allows you to create your window with the same windowId, use screen_join_window_group() to adhere to the same group that uses the FWC.  The FWC should automatically capture this event and associate the window itself.  This is how the camera it.

  2. call the bindToWindow() of the ForeignWindowControl method to associate the FWC a particular windowId/groupId.  Similar to the #1, but doesn't seem more useful if you create the FWC after the window of the screen has been created.

  3. call the setWindowHandle() of the ForeignWindowControl method.  Similar to the #2, but instead of using windowId/groupId, you spend just the actual handle.

  See the FWC docs:

  https://developer.BlackBerry.com/Cascades/reference/bb__cascades__foreignwindowcontrol.html

  If you have created the window, you can use one of the 3 approaches.  If the window has been created in a different process (eg. mm-engine rendering, or photo-service device), then generally #1 is the approach you would use.

  See you soon,.

  Sean