Creation of chapters

Similar Questions

• Audio screwed up in comics

  I tried to create a BD using two videos made with the Agency in the format H.264 Bluray.  After the creation of chapters and menus, the preview looks good and the sound was synchronized.  However, once built on the BD - R, even the navigation is still OK, the audio is gone except for the first chapter where the sound was apparently that of another chapter later.  I tried to use several different menus later but the results were the same.  Strange, I did a comic book, only two weeks using the same approach, and the disc was perfect.

  No idea what happened?

  You put the clips on the same timeline? If so, put them on a separate calendar.

• Movie Maker - chapters

  Hi, I am using Movie Maker for the first time - how can I create chapters?

  In addition, my video is stored on a portable hard drive, and I will not download on my PC because the files are too big.  Am I right in thinking that files mm creates don't actually download the files on my PC?

  Thank you.

  Hello Walt Jabsco,.

  Thank you for your response back!

  Chapters are made automatically during the creation of DVD in Windows DVD Maker.  Chapters cannot be changed.
  However, you can force it to create out upward your video into chapters by using Windows Movie Maker and save each chapter as his own project.  Add each project of creation of DVD and it will create chapters for each segment of the video.  Not sure if it is worth it.

  Please let us know status.  Thank you! Engineer James Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Creation of Windows DVD, encoding of problems/gel/stops

  I am trying to burn a DVD video disc of dvr - ms files, but I had tons of problems with DVD Maker included in Windows 7.

  I am burning 2 files dvr - ms to about 1.75 hours of video each (3.5hrs) total on a DVD + r double layer everything goes well when I slipped the creation of DVD files and previews work very well.

  DVD Maker encoding start quite well until ' he reached about 80% of the encoding, then suddenly goes to 99% encoding and said that "year error occurred when burning the DVD. The burning process, even n start (my DVD is left intact) and the error message is not very useful. I have disabled all codecs (in the options), changed the media disc, even tried to burn on a virtual, also try burner on a clean install of 7 in a VM, still no luck. I tried to re - encode the file in some AVI files, but now it takes hours to burn a single DVD (I'm still 36% after 2.5 hours, I'll see if it works)

  I tried on another computer Windows 7, still the same problem except that DVD Maker stops encoding to 74.9% with no error message, or whatever, the progress bar is just frozen. If I cancel, DVD Maker freezes with the half-burned DVD, and I reboot to unlock the drive.

  Dvr - ms files come straight from Media Center (Vista).

  A strange thing is that Live Movie Maker says that a DVD DL can contain up to 3 hours of video, so the DVD Maker says that it can hold 5 hrs? Is this a bug or is it simply because the coding compression used is different?

  Go I love Windows 7 but DVD Maker from Microsoft really needs a rejuvenation treatment technical for coding and the combustion process. It shouldn't be so complicated that burn a dvr - ms to DVD file, seriously.

  EDIT: It worked when converting dvr - ms to avi files, but now I'm getting burning problems. DVD Maker says "Please enter another recordable DVD" to a disc after burning (because he has got more capacity?), and 2 other discs have their last chapters not readable. It seems DVD Maker not is not able to adapt the videos on the disc, even if she says I 30 minutes left on the disc when you drag the videos first?

  EDIT: It finally worked. I re-encoded avi files dvr - ms files. Then I burned all the DVD using DVD Maker on Virtual CD, virtual cd burner. I then burned the ISO resulting with 7 isoburn. But I don't think that an average user could do that, it's a bit too complicated. My burner is a year old and supports writing dual layer. Why is not able to burn directly to DVD to DVD Maker remains fuzzy.

• Muse NOT RENDERING content creation simple widget in all breakpoints...

  I was the construction of office oriented websites with Dreamweaver since the late 90s. Just recently started to use the Muse and if SO is celebrated on the freewheel and is 'simple' 'sensitive' Web design (especially the latest version of) Muse, I find my work with Muse REALLY frustrating.

  I (initially) very excited by the promise of Muse is a Web site design process 'free-form '; and I felt 'better' on investment in software that had the support of an international company like Adobe, long a leader in the development of creative applications that allows users to evolve their visual content that they had ideas inside the head of brewing well enough.

  BUT I had a headache after the landing of building-out/adapt one other prototypes of page -I develop in Photoshop then build in (a very old version of) Dreamweaver - within the Muse now. SEE Imaging Services in Phoenix, Arizona: Photo editing, concept art and Lightroom training (Currently only the 'editing' and 'Skunkworks' Dreamweaver-built prototypes are powered and the link to the Company of Lightroom Phoenix works as well. And please NOTE: these pages work very well in multiple desktop browsers, as well on my fone chip so to load quickly even with WiFi a little lame on Chrome for Android.)

  - I'm thinking that each landing in MM-dot-com page will have a different 'look' that each gallery covers distinctly different content of imagery. It is my hope (from everything I read, all the promotional content, I looked on Muse - in particular the most recent update) I was going to find a more responsive and intuitive application to help me in creating pages to current content that I change my prototypes to achieve this goal.

  - It has always been my intention to keep my 'simple' sites and to build the navigation between the pages to be intuitive for the visitor; all animations - mainly rollovers, same rollover events complex (once again for Office display) as I've built here > The Book - chapters: roads, landscape, "Americana", Essays, links and more. Explore. intelligible, not wearing not too much like Candy for the eyes. My target 'public' is the other 'creative', busy people ready to explore, but not become overloaded on "cookie crumbs" in order to see what has prepared a website designer 'visionary' too clever-by-half. Nobody is going to find the patience for this.

  Now - all that said, here's the gist of my post:

  - In a couple of my galleries, it will be important for me to show the 'before' and 'after' versions of an image. (Exclusively Office days bearings worked very well, not so today with touch screens.)

  - So on a couple of separate pages image-the extension, I'm building, I thought using one of "before - after' widgets built by the community of people craft extensions to add content to Muse of coding." In this case, I used "WidgetsForMuse script. (It is quite functional. It's simple. It works as I would like to only it.)

  - HOWEVER, then the widget performs its function perfectly full screen in my desktop browsers that I reduce the viewport to simulate '1024', '786' and small breakpoints that the widget is unable to continue to operate. (Once again, please NOTE: have I not continued to experience a number any other strange events [cross-browser] as I did the other, different [really very "tame"] setting page designs in the efforts of my last month to understand how Muse 'works' so instead of bring this example to the first WidgetsForMuse people, I feel more like there is a problem-oriented Muse more and) ", as such maybe someone else has experienced anything like what I see with my work here.)

  I included a link to this short vid "unregistered" I posted on my Youtube channel for you guys show what I'm running in > problems with Widget - YouTube

  I can certainly describe, explain and post additional-screenshots, maybe another short screen cap of vid how Muse makes my creations page illustrating how Muse seems ' does not not his promise "in future discussions.

  Thanks (in advance) for your suggestions and perspective. mm

  I have the final solution ready to try here:

  Please resize the browser through all the breakpoints 1248/1024/680/480 to see how it works.

  The Widget will be updated Monday (widgetsformuse.com)

  You are able to use as many different 'before - after widgets' as you want on a single page.

  You can leave 'fully sensitive' or set the width at each breakpoint.

  Hope you like it.

• No movement chapters in 'Submenu Film' CS5 content

  Hello

  I use the menu of 'Film' and 'Film' submenu located on the CS5 DVD. I did a project in the first and sent it yet. I did it with two differnet projects. With a chapter selection shows mobile chapters and the other project does not work. In my opinion nothing else. But when you look at both projects still I see a difference: a project shows the chronology of creation while the other shows like a finished movie (which is italicized).

  Any ideas?

  Thanks, Rainer

  In the project where you do not get thumbnails of the Motion, Dbl-Click the scene selection Menu, to open it in the menu editor. Look in the properties panel and go to the Motion. Look down for the checkbox control, "Animate buttons." Make sure that it is checked.

  Good luck

  Hunt

• automatic creation of navigation sequences does not

  I'm having the same problem with the TCS that PaulB1234 described in the General Discussion forum, except that I'm generating HTML output and I did only one book of FM in the project. When I click on "auto-create browse sequences of TOC", the list of sequences of exploration remains empty. Assistance of HR says to click "Yes" to the dialog box "to browse sequences", but no dialog box is displayed.
  
  PaulB1234 wrote:
  "I use RoboHelp 7 and FrameMaker 8 in the Technical Communication Suite. I added three FrameMaker 8 files based on my RH 7 project and I converted table of contents for each book. I then added three TOC TOC placeholder by default for the FrameMaker TOCs so that all three tables of contents would be generated in WebHelp output. Everything works well.
  
  "But when I choose" tools > sequence editor to browse ", click on the 'create automatically using TOC' button and choose the default table of contents to the"automatic creation of sequences to browse Using TOC"dialog box, some sequences don't appear in the list of browse sequences.". I tried selecting other TOCs also who were converted from the FrameMaker TOC and that no longer works.
  
  "What I am doing wrong? Or is there another step before that? Or is this a bug in HR? »

  Thank you! After doing a Force update, I was able to generate automatically the sequence to browse the table of contents.

  I'm not familiar with the sequences of travel as such. We are trying to replace a WWP default feature that allows the user to scroll through all the sections in order. The order to browse automatically created by HR provides similar functionality, but you can pass only through topics in a single chapter. There is a dropdown of the chapters so that you can select a different, but they are in alphabetical order, not sequential order. Therefore, it is difficult to go through aid 'page by page' somehow.

  Is it possible to put in place-to-end navigation? During this time I'll take a look at the available commands.

• Video metadata date is incorrect: the value and not of creation date sharing

  10 iOS, iPhone 6 +, Windows 10. Photos and videos are shared through iCloud, but NOT stored in iCloud.

  Once synced on my PC, the photos and videos have a truncated name (for example, "016a1f2e11dfcc680e1009cb96346b67678fb2c6bc.jpg"). Of course, this is not acceptable at all to me when I organize them on my NAS: I prefer a significant, sortable name, as "2016-09-16 18-15-20259 (Apple iPhone 6 more) .jpg.

  To do this, I simply read the EXIF information directly from the image, and I rename the image accordingly. No problem for the photos.

  But for videos... I do the same, in the world, but with less information. I can extract only creation date/time from metadata of the videos, not the unit that captured video. Sad, but I have not found anything else, and at least it's automatic.

  Recently, I found that the date in the video file is NOT correct: this is the timecode of SHARING via iCloud, not the timecode CAPTURE. I have therefore some videos with a delta of two weeks between the true creation as well as the "official" date

  I checked this on my phone: date is correct (once the video is no longer in full screen, the date is displayed at the top of the screen, and it is 'the' date I'm looking).

  So, question: How can I get the date of the 'real' creation of all these videos on my PC? It exists: it appears on the iPhone that took the video (a woman) AND mine. Information is 'lost' only on the PC, but I think it's a problem of reading of 'bad' metadata (I use FFMPEG to get currently), or the wrong file for reading (perhaps within an iTunes/database file, but didn't find, not found in the registry or the other).

  Best solution is to find something operate locally, through the command line, to do it in batch mode. A solution of GUI PEUT agree if I can automate with AutoIt (i.e. should not be a native Win32 application, not Java, .NET, GTK, QT and so on, OR must have an export feature). A solution based on the web is not suitable, but can be less boring to review each video one after another to manually check the date.

  Thanks in advance.

  In my opinion, the only way to fix this is with third-party software like this one.

• Disabling creation tag 'Album fate. "

  Hello - the first time poster.

  Since the upgrade to iTunes 12.4.3.1 under Windows, I noticed that when filling tags for titles in my playlist ID - for example, update of the artist, Album and work - a new tag "Album fate" is created.

  Is there a way to disable the creation and filling of this tag 'Album fate? "  I'm certainly very finnicky to keep my ID tags clear of unwanted information, and the tag of the Album sorting is not something I'm curious about.  Of course, I can manually remove the tags later outside of iTunes, but it would be better, if they were not created in the first place.

  Thoughts?  Thanks in advance for any guidance, much appreciated!

  cbal324

  Since the upgrade to iTunes 12.4.3.1 under Windows, I noticed that when filling tags for titles in my playlist ID - for example, update of the artist, Album and work - a new tag "Album fate" is created.

  Hello Cbal,

  iTunes does not automatically create an Album tag kind.  It seems that as it does.

  From 12.4, if the tag Album sorting is not met, iTunes will display the name of the Album in the Album sort field (less 'a', 'one', or 'the' in the English version).  It shows in grey to indicate that it is not really met.  This is to show how the album will sort.

• Local error-1200 creation push certificates on the server. Any idea?

  In the Application Server

  When you try to renew or create a certificate to push comes up with the error "Certificates to push creation local error - 1200" on the server. Any idea? »

  I'm having the same problem with 10.7.5 server. (two of them)

  At the time of renewal, I was looking at the Console and I think the Apple Server SSL certificate is therefore more reliable.

  (or server versions are low)

  August 15 at 10:23:08 login.* * servermgrd [23349]: received the connection error: error domain = NSURLErrorDomain Code =-1200 "error SSL and a connection to the server cannot be made. UserInfo = 0x7fb8f5aab9a0 {NSUnderlyingError = 0x7fb8f15af450 "error SSL and a connection to the server cannot be made.", NSErrorFailingURLStringKey =https://identity.apple.com/pushcert/caservice/renew, NSErrorFailingURLKey =https://identity.apple.com/pushcert/caservice/renew, NSLocalizedRecoverySuggestion = you want to connect to the server anyway?, NSLocalizedDescription = SSL an error has occurred and a connection to the server cannot be made.}

  August 15 at 10:23:08 login.* * servermgrd [23349]: certificate request to push failed: reason = Local, error code = - 1200, error = error Domain = NSURLErrorDomain Code =-1200 "error SSL and a connection to the server cannot be made. UserInfo = 0x7fb8f5aab9a0 {NSUnderlyingError = 0x7fb8f15af450 "error SSL and a connection to the server cannot be made.", NSErrorFailingURLStringKey =https://identity.apple.com/pushcert/caservice/renew, NSErrorFailingURLKey =https://identity.apple.com/pushcert/caservice/renew, NSLocalizedRecoverySuggestion = you want to connect to the server anyway?, NSLocalizedDescription = SSL an error has occurred and a connection to the server cannot be made.}

  So not yet an idea, but hopefully with these console outputs happen to something?

• How to get the creation Date of the site recorded for the footer output (printing to PDF)?

  If you go to Page Setup in Firefox, the option for the footer is the date and/or time of output. I don't want today's date that its print, but would rather than the Date of the creation of this web session saved as it is important to display this information with a legal matter. The research that has been done on a computer is out of date of creation down instead. I know that I could add the date by using the custom field for a footer in the Page options but prefer automated sound somehow when you print to a PDF (CutePDF). Please let me know.

  Thank you

  You might be able to automate this process if you open your PDFs with Adobe Acrobat Pro and make sure that the PDF file has a date of receipt:
  Idea of *http://smallbusiness.chron.com/print-date-time-stamps-pdf-55986.htm...

• Only show the first page of the chapters and expandable pages

  I just downloaded a book and its showing only the first page of a large number of chapters. When I arrived at the end of the first chapter (if it is still in the right order) he repeated the same page several times. From there, the next 4 chapters were only the first page of each chapter. Is it possible to fix this? What is the cause? I closed iBooks repeatedly, I restarted my phone several times, whenever it is the same.

  Have you tried to delete the book and it redownloading via the bought? If it's that the same are all recent comments mentioning the same problem? If it's a recent purchase, you could contact iTunes Support: http://reportaproblem.apple.com

• Creation of page template with the specified base style

  I have 4.3 Pages on my Mac mini OSX 10.8.5. I want to create a template for my documents with text in a particular font, but also with all the notes in the same font.

  I searched, found and tried all sorts of ways to ensure that all notes are created in my chosen font, but my attempts have failed. Any help or advice wll be gratefully received and acted.

  Michael,

  Pages ' 09 v4.3 will not allow a frame of reference custom before the creation of reference text. Set a reference to your specifications and then by creating two new character styles that proportionately adjust the exponent, and then the reference text non-exposant - could be saved in the model.

  In the new document, you insert notes and then apply those styles at least on the first note, because with the following notes, you could copy and paste the first note of the selected character style. He said...

• No chapters after compressor export?

  Hi people,

  I'm editing old family 16mm film to a customer in a SD NTSC file.

  The file is modified with several chapters (16 or almost) fully finished.

  I exported a file of format prores FCX.  I'm doing this because I also give customers a larger file for self change later if they want.

  I drop this file into compressor and choose for preset HD H264. Voila, files look great and its water use.

  The only problem is that the chapter markers do not appear in the final .m4v file!   I see them in the window of the compressor after you import the file.

  If I use the 720 p HD file, contains the resuling .mov chapter markers.

  M4v files, I find, are more compatible with Windows computers and Mac - well, at least the customers don't need to install something more to see.

  I use a compressor on 10.10.5 4.2.2

  Any idea or wisdom would be greatly appreciated.

  See you soon,.

  Brian

  Keebler says:

  The only problem is that the chapter markers do not appear in the final .m4v file!

  Not sure I understand.

  Do you mean that the markers do not translate to PC video applications? I can't duplicate what you describe on Mac.

  And don't you think that the m4vs are more cross-platform easy as MP4s?

  Russ

• Hi, me - Joshua, using Mozilla Version 38.0.1, please share the information of the creation of tab double... Thank you.

  Hi, me - Joshua, using Mozilla Version 38.0.1, please share the information of the creation of tab double... Thank you.

  Hello!

  https://support.Mozilla.org/en-us/questions/762043

  This solution should help you

  "

     Ctrl-click or middle-click the Reload button to open the current page in a new tab.
     Ctrl-click or middle-click items in the history of the Back and Forward buttons to open a page from that list in a new tab.
     Duplicate a tab with its history by pressing CTRL and dragging the tab to a new position on the tab bar.
     Dragging a tab in the browser window will detach the tab and move it to a new window, this is called tab tearing.
     Drag a tab back to the tab bar in the original or anther window to undo a detach or move a tab to a specific window. If a window gets empty (you tear off the last tab) then that window will be closed automatically. "