creation of definition video standard bluray

Similar Questions

• "the creation of the video preview failed" to DV (firewire) and USB webcam camera

  Device Manager reports the two devices "working properly", but all attempts to use their failure any software I use.  The error varies with the software package.  Trying to get a preview of the video via "My Computer" results in the error "the creation of the video preview failed".

  Devices used for work several months ago but I don't remember exactly when they stopped working.  A Service Pack or some other Windows Update update may have caused the problem (not sure).

  Any help would be greatly appreciated.

  [My system: Windows XP (Media Center Edition), Service Pack 3, Dell Dimension, Intel Core 2, 1 GB of RAM]

  Nevermind, it works now.  For those who have the same problem, here's what I did to remedy.

  1. take DirectShowSpy.dll of Roman Ryltsov http://alax.info/blog/777 and at the command prompt, type "regsvr32 DirectShowSpy.dll" to save it.  (In fact, I used a previous incarnation, also by Roman Ryltsov, called FilterGraphSpy.dll that I had downloaded previously).

  2 - try to use your webcam or your DV camera again.  If it works, you can uninstall DirectShowSpy.dll by typing "regsvr32 /u DirectShowSpy.dll".  My camera and webcam continued to work properly after I uninstalled it FilterGraphSpy.dll.

  That's all.  Although I did some DirectShow programming, I don't know the reasons detailed why this would clearly be this specific problem.  Roman could.  Good luck.

• CARD FIREWIRE FOR HIGH DEFINITION VIDEO TRANSFER FROM CAMCORDER TO PC

  I'm trying to transfer high definition 1080i video from my Sony camcorder to my desktop HP [HP Pavilion Elite e9160f desktop PC]. I need to know the appropriate method on the transfer. I have been informed that I need to have an internal firewire card installed in order for me to transfer video HD on my PC. Can you get it someone please let me know if this is correct and if yes is my PC/motherboard able to manipulate the internal firewire card and also the type of firewire card I need i.e. PCI/PCI Express, minimum or maximum speed I need to transfer video high definition without framing or gel, for example if it is to be a minimum of 400 MB/s. And tips and suggestions are appreciated.

  Windows 7 probably has the drivers for the card.  The latest firewire cards are included with the built-in drivers in Windows 7

• Creation of educational videos

  I have 7 Captivate.  I created a series of educational videos.  I record in MP4 format.  I want to download on Captivate and add titles, text and possibly a quiz at the end.  I don't see a way to simply import the MP4 in Captivate.  He says that I have to convert the file to another format?  Can I use Captivate to do this, or there at - it an another easier way to edit movies and create a quiz?

  Another solution would be to create video with Captivate video Creator, a companion app coming with Captivate since version 6. You can insert a file PVCC (extension of raw files created with Video Creator) as a slide into a normal Captivate project. And you will still be able to open the video editor dedicated in Captivate.

  This is a video I created with the video creator: Simple compared to Standard in Adobe Captivate - YouTube tip Action

  You will see that I inserted some static in the video itself objects as the titles, text containers, highlights...

  For the Quiz, you must use cptx files (extension of Captivate), it's why I explained that you can insert a slide-cpvc.

• Share a movie in high definition video Flash

  Hello:

  I use Premiere Elements 4.0, and I would like to create a Flash video in 720 p from a 720 p input file.

  Use the presets, I can create a MPG 720 p without problem, but there seems not to be greater than 640 X 480 setting of Flash Video.  Is there a way to create a FLV to HD format so that it will be displayed as HD on You Tube?

  Thank you

  Rich Locus

  The best solution we found is the video as a MP4 high-definition output and YouTube re - encoding in FLV format, by the frequently asked questions to the right of this forum.

  http://forums.Adobe.com/thread/623549?TSTART=0

  You're not going to get any higher quality ranging from FLV to FLV, because the program still him convert to its workflow in any case format (AVI or MPEG and HDV) while working with her. Additionally, the biggest quality problems appear when YouTube starts to screw with it, that there is no way around.

  Give him a H.264 file, and you will get the best possible results.

• Problems display high definition video and and GPS information to my new camera Panasonic DMC - ZS7 on Windows Photo Gallery

  I like to use the photo gallery Windows to display my photos because I use the tags to organize my photos. With my camera older Canon, photos, and videos have been without problem. I've upgraded to a new Panasonic with a GPS. On my camera screen, I see the count, information city and point of reference, but not when I watch it on WPG. Also there is no recognition of my videos HD avchd lite. If I switch to Windows 7 will be this corrected? or how to work around these issues?

  Thank you

  Hello
   
  As you are able to view the GPS informationin on camera.
   
  To view them, you must use PHOTOfunSTUDIO HD Edition Ver.5.1.
   
  The software mentioned above comes along to the camera.
  You need to install the software and check if you are able to watch the video.
   
  You can try with PHOTOfunSTUDIO HD Edition Ver.5.1 and work with this software for a few days, and later you can upgrade to Windows 7.

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• High definition video

  Hello team,

  When I export my Flash works like SWF animation is perfect with HD output, but when I export to .mov. the quality is very bad almost 50% down. can you please advice from where I can improve the quality of video export

  Thank you

  You could put online, stage.quality = 'best', which may help.

  Is the same as the size of output stage size? I saw a case once where the export was to a smaller size, then past to the largest size.

• almost high definition video and menu title comes out blurry when the project completed

  I have been using first 10 elements since it came out and was happy until this week.  I use elements to assemble my daughters school performance for archive purposes only.  I'm working on his last play and Act was beautiful and clear, once completed earlier this week.  However, Act two will come out blurred, including the menu title and other text and the burned dvd came out very blurry.  I tried to compare the Act one and now the preview of the title menu also shows a video blurry so I know that burning will be blurred as well.  Please help as I am tired of always redo the changes.  Thank you

  Hi Mr. Romano,.

  My apologies for taking so long to answer. I want to thank very you much for your help and your patience.  I was able to solve the problem, although the two acts are engraved on dvd differently.  I tried to burn law on two using the achvd mode and all is well.  First used a disk of 8 GB and 4 GB, and the two were comparable, in fact better than the Act which had been burned just like a dvd.

  Success and always happy with 10 first.  I confess that I bought the first 13 as a possible option, but did not open.  I'll research a bit more the difference between 10 and 13 to decide if I want since I'm tempted by the shakey eliminator mode (which was visible on my Act one and two - even with a tripod).

  Would appreciate any comments on the difference between the first of 10 and 13.

  Once again thanks a lot for your help.  He got my mind in the right direction for other treatment options, and I'll ignore the before preview blur.

  Respectfully,.

  Gwen

  -

• PREL 09 - creation of the video with the endings of empty time.

  Hi guys,.

  I'm new on this forum and first elements both 9 but I hope you can help.

  I created a video with a length of 1 min 17seconds, but whenever I create video his 1 min 17sec of content followed by another 3 minutes of nothing.

  #Can any that offer advice on how I can remedy this?

  Thank you

  James

  You have certainly a few stray video images on your timeline.

  Press the-key on your keyboard (above your enter key). This will show you your entire timeline film. It is likely that it is show you three minutes of empty area beyond your current project.

  Click and drag your timeline, in the area beyond your project, and then press DELETE. Press then on the-button again. Keep doing this until you have cleaned all the errant video frames your mounting left side beyond your project.

• [AS2/XML] Creation of new video clips

  Hello

  I am parsing the XML data in a page of news in Flash, but I can't find a tutorial on how to create a new movieclip for each item in the XML document. Céline someone point me in the right direction? Thank you

  You want to do is add a link in the article model movieclip in the library so that you can add a copy of it whenever you have a new article to put in it.  To add the link, right-click on it in the library and select the link.  Check the box that say export for actionscript (and one in the first picture), and then enter a name for this object in the textfield linkage.

  Whenever you want to add a new one using the attachMovie() function using the attributed name of link

• New updates on my high-definition video Flash

  Vacuum

  Vacuum

• Application Wizard page creation diff than the standard page Wizard

  When I create an application, he automatically create a page with limited options. For example, he asks me not for the primary key, or set the source of the primary key column, or columns I want to display, or what buttons I want to use.
  
  But when I create a page on an existing application, it gives me all of the above options in the wizard. Why? And what should I do with the first created page when I created the application (which is not all of the settings that I need)?

  Hi Scott,.

  What I tend to do normally, is to just create a blank page called "Homepage" and create a home page. But it's personal. If you create pages after that, you can simply use the full wizard functionality. Also, you can set the default page 2 for the application if you wish.
  If you go to page 101-> (Page processing) processes-> Login

  Change the number 1 in the last parameter in first page by default (as 2)

  Greetings,
  Rutger
  http://rutgerderuiter.blogspot.com/
  ===============================================================================
  You can reward this answer by marking as being useful or correct ;-)

• I'm looking for laptop 64-bit video editing high definition

  I am looking for a * 64 bit laptop computer *, mainly for video editing high definition, but also for the occasional game.
  I read on the Qosmio 64 bit machines, but I don't know which model.

  It would be powerful enough for video editing or they are intended more to play the game?

  Any suggestions concerning the ideal models would be welcome.

  Thanx.
  Zen OKI

  Hello

  What do you think of the Qosmio G50 series?

  I read that the Qosmio G50 is the portable entertainment has ever created more advanced than Toshiba.
  It was equipped with the Toshiba Quad Core HD processor, which was designed for the normal high standard definition video conversion-enhancement.
  You can use any commercial DVD movie and can watch the movie in stunning HD.

  In addition, the CPU and the GPU are really powerful and you could play more new generation of games that are on the market.

  See this page for more details on G50 series:
  http://EU.computers.Toshiba-Europe.com/innovation/Home/-> Products-> Qosmio-> G50 series.

• Why not Lightroom organizes photos and videos is missing 'date taken' by 'date modified' instead of 'creation date '?

  It always seems to be a problem with Lightroom 5. This post is one of the first results, after trying to Google this problem, and it's for LR3. I don't understand why something so basic to some photos (and video) Organization has been neglected for so long.

  I tried to import and organize all my old photos and videos by date with LR5. They have been backed up and copied several times over the years, most recently on an external drive last week. Thus, each file has a 'creation date' last week. But 'change' is the date recorded.

  It's not bad for pictures with a good EXIF "date taken" - but LR5 resembles the "creation date" for videos, making it completely useless to organize them into folders based on date. He puts videos I recorded in 2010 (in accordance with the "modification date") in a case 2014-12. Why.

  It is not only a video problem - some pictures that I took with devices that does not record date "EXIF taken" are also filed in folders of this month even if the 'update' on them is correct as is 5 years.

  How can I count on LR5 organization importing and based on the date when it is based on the files (lack of "date taken") having never been copied or backed up?

  It has been at least partially fixed in LR 5.5, for images: Lightroom: the dates do not match for the missing files metadata date/time.  But I just tested import a .avi in LR 5.7 / Windows 8.1 and the date below the thumbnail in the grid has been the time of last modification of the file system, while the Date of Capture in the metadata Panel has been set at the time of importation.

  I started a new topic in the Adobe official feedback forum: Lightroom: capture still inconsistent date/time for videos. Please add your vote and review on it.

• Is there an easy way to import controls of standard video playback (rewind, pause, play, fast-forward) in a composition of edge?

  If there is something that I can just import the video standard controls playback (pause, rewind, playback, fast forward), it would be very useful.

  punzelda wrote:

  From what I can tell, these controls are only for imported videos, not for the composition of the Board itself, which is what I'm looking for.

  Your original question did not mention that you wanted FOR the composition of edge iteslf, my apologies for the misinterpretation.

  You should be able to import any video control desired 'like' graphics and apply appropriate reading events.

  So for a graphical game would be something like sym.play(1000) ();

  For the Stop: Sym.stop ();

  Ditto for the break.

  As a reminder, it would be like sym.playReverse ();

  I'm not sure to fast forward as it will require some additional script changes.

  Darrell