Creation of executable files

Similar Questions

• Creation of stand-alone executable file with similar library files without errors of link

  I have an Executive Test that is run on two different test systems. Each stand has another card ARINC429. The old card use 429dll32.lib, while the most recent map use pci429.lib. Test Exec code only loads a single library file (using LoadExternalModule) depending on what the test bench has the card, but since there are many similar functions in both, ICB does not test Exec be built as a stand-alone executable.

  In CVI 5.0.1 I opens the "Create stand-alone executable file" and select "add files to the executable. I check the 429dll32.lib and the pci429.lib to include in the creation of executable, and then click 'OK '. When I click 'OK' to create the executable I have several link errors, one for each function both .lib files have in common.

  Is it possible for each of these .lib files to be included in the compilation without having to create two separate executables?

  eatmontr:

  If you use LoadExternalModule(), you need not include the .lib files in the Executive test project.  Refer to the CVI for LoadExternalModule help.

  Here's the info on the help:

  LoadExternalModule loads an external object module file. You need not list the file in your project or loaded as a module of an instrument.

  The file may be an object (.obj) file, a library file (.lib) or a library (.lib) import DLL.

  Here are a few articles to OR who can help.

  To access the plug-ins with CVI (with sample program) http://zone.ni.com/devzone/cda/epd/p/id/133

  How do I call dll if I have two functions with the same named in two different dll? http://digital.NI.com/public.nsf/allkb/5299ED8D43F3B5FE852563BF0056EBA6

• Executable file icon

  Hello.

  I have a question about the creation of the executable file of LabWindows/CVI 2009. After creating and running the file, on the Windows property bar two icons are present instead of one (one of them disappears when the program window is minimized). Is there a way to have only 1 icon in the property bar?

  Thank you

  B.M.

  Hello

  assuming that you are referring to the executable to debug and task bar buttons you can change the behavior by setting the ATTR_HAS_TASKBAR_BUTTON attribute group (0, the default, means no separate taskbar button).

• executable files: cannot access the file because it is being used by another process

  Hello
  I created a file named test.bat on my desk
  baptized "test.bat" and sent the notebook, wrote "REM" and recorded.
  so, I closed my notebook and reopened, has added another "REM" and saved the file again.
  then I tried to rename, move the file to another folder and delete
  everything went without any problems.

  But if I create the file and run it, the command prompt will appear for a while and then disappear.
  I can rename or move the file without any problem,
  But if I try to edit the file in Notepad, I get this error:

  The process cannot access the file because it is being used by another process.

  and the file is not saved.

  also, if I try to delete the file, it seems to be deleted until I press F5, the file appears again.
  When you try to rename/move this new file, I get another error:

  File Access Denied

  You need permission to perform this action

  You need the permission of the administrator of the computer to make changes
  in this file

  It seems the file is opened (or if I choose to delete) after a few minutes, then it is not if I try to access
  the file (I kept pressing F5 every few seconds for 15 minutes and the file is missing)

  the problem appears if occuar with any file name, anywhere, not just the office or home by car, not even on the same disk,
  while I had no problem when I started in an old installation of windows xp and repeat the same steps.

  I tried to use the sysinternals utility handle, that's what I have:

  After creating test.bat:
  C:\Users\User>handle test.bat

  Copyright (C) 1997-2013 Mark Russinovich
  Sysinternals - www.sysinternals.com

  No found the corresponding handle.

  After you run test.bat:

  C:\Users\User>handle test.bat

  Handle v3.51
  Copyright (C) 1997-2013 Mark Russinovich
  Sysinternals - www.sysinternals.com

  System pid: 4 type: file A18: C:\Users\User\Desktop\t
  EST.bat

  has obtained the result above after attempting to remove test.bat also.

  After the creation of othertest.bat:

  C:\Users\User>handle othertest.bat

  Copyright (C) 1997-2013 Mark Russinovich
  Sysinternals - www.sysinternals.com

  No found the corresponding handle.

  After execution of othertest.bat:

  C:\Users\User>handle othertest.bat

  Handle v3.51
  Copyright (C) 1997-2013 Mark Russinovich
  Sysinternals - www.sysinternals.com

  System pid: 4 type: BD0 file: C:\Users\User\Desktop\o
  thertest.bat

  After you rename the othertest.bat:

  C:\Users\User>handle othertest.bat

  Copyright (C) 1997-2013 Mark Russinovich
  Sysinternals - www.sysinternals.com

  No found the corresponding handle.

  C:\Users\User>handle renamedtest.bat

  Handle v3.51
  Copyright (C) 1997-2013 Mark Russinovich
  Sysinternals - www.sysinternals.com

  System pid: 4 type: BD0 file: C:\Users\User\Desktop\r
  enamedtest.bat

  the also occuars when I run any .exe file and delete it after its finished running, I deleted
  the handle.exe and the handle64.exe after the test above and at the same time returned when I updated their records.

  can someone help me?
  IAM using Windows 7 ultimate 64-bit.
  Thank you.

  I struggled with this VERY ENNUYANT thing for a long time on a Windows Server 2008 R2.

  Just found the answer:

  http://superuser.com/questions/260375/why-would-system-continue-locking-executable-file-handles-after-the-app-has-exit

  Activation of the service 'Application Experience' does the trick for me.

  If I got paid for every minute spent dealing with the mysteries of Microsoft... No, wait! Paid!

  Thank you Microsoft!

• Batch script (stopping oracle bi services using executable files)

  Hello experts! :)
  
  I do a script of DOS commands to automate the migration of files Oracle BI from one environment to another. I am just a beginner with the creation of batch files so far as I know are the basic commands. So far, I am able to create a backup of the files to be transferred to a new directory. I reached the part of the script in which I connect to another environment and perform all the tasks (i.e. to stop services, create a backup, copy files, etc.)...
  
  If someone knows all of the executable files associated with starting and stopping of oracle bi services? I've identified those that start services, I do not know which files I have to run to stop the services.
  
  And if you also have any advice for me while I'm working on the batch file, please share your thoughts.
  
  Thank you very much! : D
  
  Kind regards
  Cha

  You can use Microsoft net start / stop control for the services. See below for example. You can add other services also.

  echo% Date % % time Restarting Oracle BI Scheduler
  echo =====================================================
  net stop 'Oracle BI' Planner
  net start 'Oracle BI Planner'
  echo ======================================================
  echo% Date %% time % Oracle BI Scheduler started

  HTH,
  Prakash

• My MacBook 12 regularly gets an analysis of needs of Unix executable file names in her basket

  My MacBook 12 regularly gets a Unix executable file named 'needsanalysis' in his trash. Anyone have any idea why? What is it? What can I do to stop what is happening?

  I have two laptops on a an environment MBA 2011 and a 2016 MB and it happens on the latter. Both are on OSX 10.11.6

  Thank you, Colin.

  The executable "unix" just means that it doesn't have an extension for the operating system is not what it is. In addition, the executable bits are defined, so it may have been a case, but this info was lost, too.

  Do you run all software anti-virus on them? I don't know what else would generate something that "needs analysis".

• How to prevent the creation of 15000 files for 300 MB each day Firefox

  Firefox creates files of 'file' in C:\Users\LeRicain\AppData\Local\Mozilla\Firefox\Profiles\dnm04rk5.default\cache2
  There are about 10,000 and 20,000 files I have to remove to get about 300 MB of space each day

  How to prevent the creation of these files in Firefox

  Here are the files from cache. Basically, it takes Web sites that access you a lot and records bits of them so they'll load faster the next time you visit them. FOR EXAMPLE if you visit Google.com much, Firefox will save some elements of this page in the cache so that the next time visit you Google.com, it will not have to re - download.

• My company blocks the executable files to run in the Temp folder. How can I install Firefox without that he tries to run from a temporary folder download.exe?

  I found a work around for the problem of not being able to run executable files from the Temp folder.
  I came across the complete installation of Firefox download page. I downloaded the full installer and used WinRar to extract the file downloaded to a folder and then I could launch setup.exe and Firefox installed successfully.

  Please publish the link on the full installer of Firefox on the same page where the installer of heel is published.

  Thank you.

  Hello

  Complete installers can always be downloaded here:

  • https://www.Mozilla.org/en-us/Firefox/all/

  I guess you went to this page:

  • https://www.Mozilla.org/en-us/Firefox/new/

  I notice that the page has changed a bit since the last time I saw him, but you can join the first link I posted by clicking on «Systems & languages»

• How do I burn a file .img to a DVD and have it be an executable file?

  How do I burn a file .img to a DVD and have it be an executable file?

  It seems that used to be possible using disk utility, but not more for some reason any.

  Hi Frank

  Not sure, what do you mean by executable video file, assume you mean play on a DVD player.

  You create an image file to DVD in iMovie, FCPX etc... This allows the correct coding and the structure files for DVD, s / BDs.

  Once you have the .img file, you can (control) click on the file and choose ' burn Image 'File name' disk drive...» »

  Be aware that you need a R/W drive mounted/Secretary for the contextual elements appear. If you have a Blu - ray image, you need a BD player. Your file must be less than 4.7 GB for single DVDs faces or ~8.2GB for the DVD DLs. to 100GBs for quad layer BDs.

  There are other 3rd party there as well.

  Hope this helps, Greg

• My Avira Antivirus has been removed and the executable file Recovery Disc Creator

  Hello

  I want to create recovery DVDs, but I can't use Recovery Disc Creator because Avira deleted the executable file. How to do it?

  Thanks in advance

  I use Avira if a long time now and I've never experienced something like that. It's pretty bad situation now.

  Creator of recovery disk Toshiba cannot be downloaded and what you can do now is to reinstall the OS using the HARD drive recovery option, then when the laptop has once again factory settings, you will be able to start this tool and create the recovery disk.

  Out of curiosity, what model of laptop you have exactly?

• How to create an executable file from a LabVIEW 8.6.1

  Hi all

  I have a VI and you want to make an executable file, let me know the steps required, thank you.

  Does anyone know how to read a manual?

• USB-6008 how to move an executable file to another computer.

  Hello Forums NOR!  Please bear with me as I'm new to products OR as well as this forum.  Hope I have write in good advice.  I'm an electronics technician with over 30 years of experience in a variety of hardware and software that is trying to move an executable file from an old computer to Windows XP on a new computer Win 8.

  First of all, I just moved the file .exe itself.   When it is run, it produces an error dialog box: "Unable to locate the LabVIEW run-time engine" "this executable requires a 2011 version (or compatible) LabVIEW Run - Time Engine."

  Then I ran the installation disc driver supplied with the USB-6008 module.  Now, the executable will start but it does not seem to connect with the USB-6008, because it does not have the digital I/o.

  I can run NI MAX and see the USB module as well as test the analog and the digital I/o so I know the hardware works.

  I've been surfing on the knowledge base and found references to .dll & .vi type support files, but have no idea of which ones to get and where they might be.

  This is possible without having to recompile the exe file?  I have no access to the source files.

  Thank you!

  
  

• LabVIEW FPGA: Not possible to create an executable file that uses the FPGA in Simulation Mode? I get a weird error code

  When I try to create an executable from a host VI that has an "Open FPGA VI" reference who has run, the value "Dev computer w / Sim i/o" value, the application is built without error but when I try to run it, it opens with an arrow broken to run and has the following error:

  "VI has an error of type 2302200.  The full development of LabVIEW version is necessary to correct mistakes. "In fact, he repeats this message two times in the same window for some reason any.

  Moreover, I * have the LabVIEW full development version and I use 2010 SP1

  While the error message is not as clear as it could be, you're right: you cannot run an executable file that tries to run an FPGA VI in the simulation.  It would be nice if there was an error in compiling.  I always forget to switch to run on the target FPGA before building my application and discover the error until I have it copied on the system in the laboratory.

• How can question I run an executable file in the background?

  Hello

  I'm trying to run an executable in the context of LabVIEw, but none of the methods described in the forum and on ni.com seems to work. I use LV 2011 on a 64-bit Windows 7 machine where it is important.

  I tried the method described in "How to make an executable in the background as a marketing app?" (http://digital.ni.com/public.nsf/websearch/4A8B626B55B96C248625796000569FA9?opendocument&Submitted&&... but I always see a fragment of a window at the bottom near the start (Exhibit 1) key.) Table 2 shows that it consists only of the title bar. (I customized the appearance of the window as described and added the two points

  HideRootWindow = True

  UseTaskBar = FALSE

  in the *.ini file.)

  I also tried to disable all other items in the menu customize appearance of window with the same result.

  Then I tried the method described in "Ongoing execution of an executable of LabVIEW as a background process" (http://digital.ni.com/public.nsf/allkb/EFEAE56A94A007D586256EF3006E258B) addition of the FP. Open the VI method and affecting the hidden state. I got the same result (table 1).

  Should I do more or different for my version of windows? I appreciate your help. Thank you.

  I found the problem. It was a wrong directory for the build name. I continued under an older version of the executable with the default window settings. The method that is described in how to run an executable file in the background as a startup Application? "(Works... http://digital.ni.com/public.nsf/websearch/4A8B626B55B96C248625796000569FA9?opendocument&Submitted&& .

  Sorry, for wasting your time. Mea culpa.

  Peter

• What version of the Visa Runtime executable files compiled in LabVIEW 7.1 require?

  We have an old executable that was written in LabVIEW 7.1 and uses the serial port communication.  We are licensed with LabVIEW 2010, however our company policy requies a lot of paperwork so he should recompile.

  The executable program has worked well over the years.  The computer on which it is running has to be replaced. Any software included in the CD 'Install' is not enough, and now there is no communication with the serial device.  I guess the problem would be DURATION VISA European Commission.

  Does anyone know which version of the Runtime VISA is required for executable files compiled in LabVIEW 7.1?  Is this something of "Legacy"?

  Thank you in advace for assistance.

  Glen

  Aside: I ask: anyone actually trying to make a search more? This must be the fourth issue that I saw this morning that could have been answered easily if a simple search had been made before posting.

  http://digital.NI.com/public.nsf/allkb/E7C93038169B6E7686257847004B8B9C