creation of package and the classpath setting

Similar Questions

• I installed photoshop CS4 on a new PC with the original CD. Camera Raw does not show the 'Snapshots' tool and the tool "setting of the target". Thanks for your help!

  I installed photoshop CS4 on a new PC with the original CD.

  Camera Raw does not show the 'Snapshots' tool and the tool "setting of the target".

  Thanks for your help!

  

  As you can see, you are using version 5.0, who can't stand still not instant in it.

  Please check for updates in Photoshop > help.

  Concerning

  Sarika

• Popup lov (retrieves the filters and the first set of rows) returns the id

  Hello
  
  I have a problem when using a popup lov (retrieves the filters and the first set of rows). My LOV is a list of people posting their names, and it works very well when the popup opens. But in the "textfield" showing that you have chosen the corresponding id is displayed. This is not what I want. I want the name to be displayed.
  
  Any help would be greatly appreciated,
  
  Bram.

  Bram

  The text field is filled in with the return value.

  If you have

  SELECT name, id
  FROM table
  

  ID will be returned to the text field. If you want the name displayed, then it should be...

  SELECT name a, name b
  FROM table
  

  If you want to use the ID later, behind the scenes, then you could calculate it according to the name.

  See you soon

  Ben

• How is it that I can ping between ESXi vmkernel interfaces with the sizes of package exceeding the value set in my passage upstream and one located in my vmkernel port group itself?

  
  I have a 10 GB dell powerconnect 8024f the switch and the firmware is OLD, but the port config shows maximum frame size = 9000 to all cable ports

  2 guests ESXi 5.5 wired, build 1331820, put each host computer network is managed by a single port dual qlogic 8150 ANC

  When I connect to my windows VM to check my new 10 GB connectivity (it is configured for jumbo mtu = 9000 frames) and ping-l 8190 against ESXi vmkernel interface that was MTU of 1500, I get an answer without any packet loss... How can it be if the port is configured for only 1500 MTU?  I thought that the two vmkernel port group and vswitch properties must have 9000 mtu defined, it appears that the vswitch properties override the port group properties.

  But I know I must be missing something, a few important concepts, somewhere, because when I connect to ESXi via ssh I can ping devices with values greater than 8190 and not just windows virtual machines that reside on the same host where the ping uses the internal bus, but I am referring to the connections of the host of other ESXi on the switch management.

  In summary - how the VMkernel does ping and response to pings of bigger sizes greater than the value of the switch upstream?   and why do ping with large packets get answers when the vmkernel port group is always set at 1500, is this a bug or is this feature obsolete?   I remember specifically in ESXi5 that I had to configure the vmkernel port group and the vswitch for this property to work.

  Unless you specify "Don ' t fragment" (-f for Windows) you will be able to use any size package successfully.

  For ESXi, take a look at Troubleshooting ESXi Jumbo Frames.

  André

• extract the package and the procedure name in the code

  In my treatment of exceptions, I need to register the name of package and procedure I have the exception. How can I get these two names without manually coding the names?
  
  Thanks to anticipiation

  A better option is to get the package name and the line number

  An even better option is to use the pl/scope (when you are in 11g (not sure about 10g)):

  SQL> alter session set plscope_settings='identifiers:all'
  /
  Session altered.
  
  SQL> set serverout on
  
  SQL> create or replace package pkg
  as
     procedure p1;
  
     procedure p2;
  end pkg;
  /
  Package created.
  
  SQL> create or replace package body pkg
  as
     procedure get_scope (obj varchar2, line int)
     as
     begin
        for c in (select rpad (lpad (' ', 2 * (level - 1)) || name, 20, '.') || ' ' || rpad (type, 20) || rpad (usage, 20) identifier_usage_contexts
                  from user_identifiers t
                  where level != 1
                  start with line = get_scope.line and object_name = obj
                  connect by usage_id = prior usage_context_id)
        loop
           dbms_output.put_line (c.identifier_usage_contexts);
        end loop;
     end get_scope;
  
     procedure p1
     as
     begin
        null;
     end p1;
  
     procedure p2
     as
     begin
        get_scope ($$plsql_unit, $$plsql_line);
     end p2;
  end pkg;
  /
  Package body created.
  
  SQL> exec pkg.p2
  
    P2................ PROCEDURE           DEFINITION
      PKG............. PACKAGE             DEFINITION
      PKG............. PACKAGE             DECLARATION
  PL/SQL procedure successfully completed.
  

• After reinstalled Vista, Vista error package and the serial number is already in use

  I installed Vista on my PC - updated the PC, then installed again - now he tells me my package of Vista and the serial number is already in use?

  * original title - I installed Vista on my PC - updated the PC then installed again - now he tells me my package of Vista and the serial number is already in use? *

  Hi Barbara Berry.

  In addition to the post of Richard, please see the instructions for the activation of phone below:

  The phone activation

  If you have difficulties to activate Windows 7 open the Windows Activation Wizard in Windows 7 to use the phone and activate Windows:
  1. Click Start, and then in the search box type: slui.exe 4
  2. press enter on your keyboard
  3. Select your country.
  4. Select the option to activate the phone, then call and hold to a real person.

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• [Training] The package and the launch does not work

  I try to use the "Package and launch" option in the drive and doesn't seem to work.

  I've specified that correcting the IP and the password as the playbook in the settings. I get the message "Build successful" but the Simulator does not launch the app. He remains in the home screen.

  REF: I checked and the Simulator is sensitive.

  Thank you.

  Reset the Simulator toured (took a few resets for me).

• What is the difference between the function declared in the package and the CIP

  What is the difference between the definition of a function in the package and package body?
  
  Published by: user10641405 on November 19, 2009 13:29

  If you describe a package, you will see only the functions declared in the spec.
  If you declare only in the body but are not available to other packages (they are private to the package, non-public)

• How to connect an expiration date in the ID and the password set cached?

  I have windows 2003 race. I would like to know if there is any kind of code and where it must be added have log vpn users in the local network before they user of the laptop to go on the web?

  In other words, how I plug in and the expiration date for the caching of id and password?

  I'm not sure that's what you want.  You can change your machine such as passwords are cached at all, but then a person could not connect to his laptop unless it is connected to your domain, when it connects (forget not to use your computer on a plane).  If you want to control access to the internet, many businesses use a Proxy Server with a password to regulate the internet connection.  See if these MS articles shall apply:

  "Caching of security credentials in Windows Server 2003, Windows XP, and in Windows 2000"
    <>http://support.Microsoft.com/kb/913485 >

  "Cached domain logon information.
    <>http://support.Microsoft.com/kb/172931 >

  HTH,
  JW

• Given the wording and the value setting method

  Given a name/value pair, how to set a Panel control with the label name for a value of value?

  This seems like it should be simple, but I can't.

  I guess you are referring to a control on an another VI. In this case, you will need to open a reference to this VI, and then simply use the method to set the value of control:

  

  Notice that I use the version variant of this method. There is also one that works with the flattened data. Please see the documentation for more details.

• Adobe CS6 package and the extension manager

  I managed to create a package for Adobe CS6 using AAMEE 3.1 on Mac OS X 10.7.5,, but the package will not be installed in silent mode. Adobe Extension Manager opens at the end of the installation. I tried to jump the 6.0.4 update of Extension Manager, leaving 6.0.0.412. Which fixed a bunch of errors that appear in the extensions Manager, but I can't understand how to prevent it from launching altogether. It nevertheless opens to a EULA that must be accepted and then displays an error that says "the extension 'Adobe Flash Professional Toolkit for CreateJS' does not contain a valid signature. The extension will not be installed. "I found this article with an update of the box tool for CreateJS that is supposed to fix the problem, but I can't understand how to include in a package created with JEAN.

  http://helpx.Adobe.com/Flash/KB/error-installing-Toolkit-createjs-11.html

  Thank you!

  -Jorge

  Hello

  A new update for this problem has been posted on http://www.adobe.com/support/flash/downloads.html. You must download this update and manually add when you create a package by using JOHN. There is a button "Add manually" on JOHN updates screen. You who add this update manually and create a package. Please follow this post on the forum - http://forums.adobe.com/message/4790883#4790883. There are more details in this regard.

  Thank you

  Rajindra kokola | Adobe Systems | [email protected]

• Computer recognizes the usb microphone and the head set with the sound prompt but not instructions to continue.

  Original title: usb speaker and seeded

  c.p. recognize the usb microphone and head studded promp sound but no instructions to continue. I am trying to add voices or narration to my editing of soundtrack.

  Hi Billylambert,

  1 Windows operating system you are using?

  2. What is the brand and model of headphones and microphone?

  3. what video editing software do you use?

  4. were you able to use the device before without any problem?

  5. have you made a recent software or hardware changes to the system?

  If you are using Windows 7, you can try to run the Audio recording utility and check if it helps.
  Open the troubleshooting of Audio recording

  For more information, see the article:

  Connect one microphone, music player or other audio device to your computer

• Query took too much time when adding new column to the table and the index set on this

  I added a new column to the table that contains thousands of records. and created the composite index with three columns (those newly added + two existing column)

  for the specifics. TBL table there are two columns col1, col2

  I added the new column col3 to TBL and created composit index (col1, col2, col3).

  Now for all the records in col3 is NULL. When I choose on this table, it takes too long...

  Any idea what my I do bad., I have check the query plan, it is using the index

  It is solved using collection of statistics using the

  DBMS_STATS. GATHER_TABLE_STATS

  @Top.Gun thanks for your review...

• Need help to know where to find all these collection and the collection set folders on my hard drive

  Just did a seminar photoshopuser a few days ago and I can't always get a grip on how these lightroom folders correspond with my hard drive.

  After the installation of several photos that I want to do various things like post to social networks, save as a .tiff, jpg and have access to the file edited without open lightroom.

  They are nowhere is on my hard drive?

  Can someone direct me to a useful resource to understand this.

  Thank you

  Any changes that you made on the images are stored in the catalog, the original files is kept intact.

  While you are in the export dialog box, you have the opportunity to choose the location where you want to save the exported images.

• New creation site Web and the Muse:

  Need to place a PDF in MUSE or a multi-page newsletter... How can I do this?

  You can create the form using Acrobat and then use in your site:

  http://www.adobeforacademics.com/tutorials/537

  http://StackOverflow.com/questions/4247361/display-PDF-as-HTML-form

  http://www.Adobe.com/products/Acrobat/form-creator.html

  Newsletter, you can use any third-party service:

  http://musewidgets.com/collections/all/email

  Thank you

  Sanjit