Creation of perspective for the shadows

Similar Questions

• When I defragment I get message "suspended for the shadow copy of volume.

  Original title: Defrag problem

  When I defragment I get message 'suspended for the shadow copy of volume' whatever that means?

  The VSS Service should not be run unless you do some kind of a backup that uses it.

  Are you using any kind of third-party backup software that would force the VSS Service to run all the time?

  If defrag used to work, what do you think might have changed since the last time it worked correctly?

  I have my VSS Service set to "Manual" - in this way, it not start with XP on a restart and run all day to do nothing, but he will start by itself when I do a backup and stop when the backup is complete (it runs when you need).

  You check the VSS Service, click Start, run and enter in the box:

  services.msc

  Click OK to open the Services applet and find the Volume Shadow Copy Service.

  Select the status and Startup Type columns.

  If you do not have a backup at this time there, the Status column must be empty (not started) and the Startup Type should be set to manual.

  If this is not the case, let a right-click on the VSS Service, properties, Stop (to stop it), change the Startup Type to manual and OK your way out (ensure that it is reactivated by itself).  If it starts up again without a valid reason, you need to understand why and fix it.  Restart to make sure the changes 'stick '.

  See if your defragmentation works when the VSS Service does not work...

• failure of the regular creation of translation for the protocol 50

  Hello

  I get the following error message when you try to connect a vpn client via an ASA5505 with an ipsec already configured a connection site to site AES/256:

  failed to create regular translation for protocol 50 src:inside:192.168.1.167

  DST: Outside:XX.xxx.x.64

  The address of a site isn't relevant, I don't mean to pass traffic to the site to site, but rather to create a new virtual private network from inside the customer external VPN outside which is not under my control.

  The client is able to create a connection, but no traffic is passed, when I try to ping / rdp, the message above is returned to me.

  If I add the static rule (indoor, outdoor) interface 192.168.1.167 netmask 255.255.255.255 then it works, everything works, but ONLY from this computer.

  Been Googling for hours, but no result yet.

  Hope someone can shed some light on my questions.

  Thank you

  \\mark

  Hi, as the client away from end running the VPN server to turn on NAT - T, if they have a PIX / ASA have then add isakmp nat-traversal crypto 20 just as you do not have in your.

  Concerning

• We offer 2 different hardware ID in PackageInfo.xml HardwareIdList node in the creation of metadata for the device stage?

  I want to have the device for two stage experience devices single-family homes with different hardware ID, so that I can create unique metadata file for these 2 devices.
  Following scenario is possible to have 2 different experiences in a unique package of metadata?
  PackageInfo.xml looks like this.
   
     
        DOID:USB\VID_0001 & PID_1111
        DOID:USB\VID_0001 & PID_2222
     
      en-US
  Thanks in advance.

  The Microsoft Developer Network (http://social.msdn.microsoft.com/Forums/en-US/categories/) forums would probably be a better place to ask this question.

• Can't see the widget of perspective for the vanishing points grid

  I have my perspective two point upwards in Illustrator CC, with the selected Perspective selection tool. I see the widgets to adjust each plane as well as to adjust the horizon. However, I don't see the widgets that adjust the vanishing points. Any suggestions?

  Select the tool perspective grid

• creation of listener for the manually created database

  Hi all

  Oracle 11 g 2

  RHEL 5

  I have a server with a single database that is installed with the default listener listen to 1521.

  Now, I'll create another data base to help create database statement. I want to have a separate listener called listener2 on port 1522. How the database manually created to listen to listerner2...

  Kind regards

  1 / created the database manually

  Using SQLPLUS > CREATE DATABASE...

  For additional info check documentation for version you use.

  2 / create a new listener

  USE NETCA or UPDATE YOUR LISTENER. ORA or use srvctl

  For additional info check documentation for version you use.

  3 / update the database using the parameter local_listener with the new name of listening port?

  Using sqlplus > alter system set local_listener = scope = <> = sid<>

  For additional info check documentation for version you use.

• Resources does not get generated during the creation of plugin for the release/debug version of CC 2015

  I'm trying to generate a plugin release/debug for 2015 of CC using the SDK version 11.2, the build succeeds with the message below:

  
  

  merge_res.cmd done.

  1 > removal of old resources...

  1 > not found \*.idrc C:\Users\CS\Documents\GitHub\CS-DTP\IndesignPlugin\CSDTPObserverPlugin\build\releasex64\ (CSDTPObserverPlugin.sdk, resources)

  1 > 0 or the files copied

  1 > create library...... \.. \build\win\objRx64\CSDTPObserverPlugin/CSDTPObserverPlugin.lib and object...... \.. \build\win\objRx64\CSDTPObserverPlugin/CSDTPObserverPlugin.exp

  1 > CSDTPObserverPlugin.vcxproj-> C:\Users\CS\Documents\GitHub\CS-DTP\IndesignPlugin\CSDTPObserverPlugin\build\releasex64\C SDTPObserverPlugin.sdk.pln

  1 > restore_res.cmd done.

  = All build: 1 succeeded, 0 failed, 0 skipped =.

  
  

  When you try to load the plugin in InDesign, I get below error:

  "CSDTPOBSERVERPLUGIN. SOFTWARE DEVELOPMENT KIT. PLN"plug-in is missing plugin resources or the model/UI attribute is not specified in the PlugIn Version resource!

  
  

  
  

  
  

  
  

  Could you please check the .fr file included in the project is set up correctly to compile and the compilation is successful with success for this file. You can quickly verify this by right-clicking on the file in VS .fr and check if the compilation shown option is indeed active and clicking Treaty the file successfully. If all this is correct, then the next step is to check the output created by this compilation, the path of the compiled files and the command-line merge_res.

  Hope this helps you

  -Manan

• Creation of .htcaccess for the first time

  I want to create a .htaccess file. The main reason I do it is to prevent the .html and .php appear in the url bar. Even though I have read several articles on how to write a .htaccess file, I have a few questions. FYI: My site is about graphic design and it has some info text and a portfolio with images. Should I avoid the hotlinking? When other sites use our images is not something good about us? Is not a good publicity for our work? Should I prevent Directory Listing? (I don't know if it's good or not) I would add an Image caching setting? What would be the recommended time? Most of the images will not change. Can you give me some advice on how to install remove extension .html URL? I read that next to code in .htaccess, I must add the code inside each .html for this file and I got confused in this part. Where should I put this file?

  There is certainly a way to do this on Windows servers. Someone will know, if you can start a new discussion as htaccess does not apply.

• I have illustrator cs5, and I have plans, side, rear, fronts of vehicles. I did a trace of the line of these elevations and projected using the perspective for the perspective grid tool, but I get a distorted view on it, I'm trying

  I have illustrator cs5. I have front, side, rear, plans of vehicles. I need to create 3D illustrations. I did a trace of the line of these elevations and them projected on the perspective grid using the perspective tool.  I got a distorted view of each side of the rack.  What should I do?

  Please see the establishment.

• Creation of Validation for the multiple selection list or shuttle point

  Hello
  I'm new to APEX and have questions about the best way to validate the selected shuttle items to verify that they exist in the sys.dba_roles table before submitting. The shuttle point uses a static LOV. I would like to than the error message to display when there is no such thing as a role selected in the element of the shuttle in the sys.dba_roles table.
  
  Using version 3.2 of APEX
  DB version 9.2.0.8.0
  Internet Explorer version 6
  
  I tried to create a validation step level about to shuttle P3_ROLE using SQL EXISTS when you press the button SUBMIT. I know that when argued that the shuttle point returns the selected values in a single string delimited by a colon. I use the APEX_UTIL. STRING_TO_TABLE to convert values selected in a table.
  
  CODE HERE
  declare
  l_selected APEX_APPLICATION_GLOBAL. VC_ARR2;
  number of l_num;
  Start
  l_selected: = APEX_UTIL. STRING_TO_TABLE(:P3_ROLE);
  BECAUSE me IN 1.l_selected. COUNTY
  LOOP
  Select 1 from l_num of sys.dba_roles where role = l_selected (i);
  END LOOP;
  end;
  
  This is the error ORA-00928: lack of SELECT keyword
  1006 - ERR error in the validation routine.
  
  Any advice? Thoughts? Thank you.
  
  Published by: Violet on Oct 14, 2010 14:50

  Hello

  Your code is PL/SQL block. You cannot use this type of validation with your code.

  Try to change the body type of the function that returns the error text and
  code for this one

  DECLARE
    l_selected APEX_APPLICATION_GLOBAL.VC_ARR2;
    l_num NUMBER;
  BEGIN
    l_selected := APEX_UTIL.STRING_TO_TABLE(:P3_ROLE);
    FOR iIN 1..l_selected.COUNT
    LOOP
      SELECT count(1) INTO l_num FROM sys.dba_roles WHERE role = l_selected(i);
      IF l_num = 0 THEN
        RETURN 'Role not exists';
      END IF;
    END LOOP;
    RETURN NULL;
  END;
  

  Kind regards
  Jari

• Initial creation of DB for the new application

  Hello
  
  I develop an application in an offline environment, synchronization with a master repository, to have so I use Oracle Lite.
  
  As far as I understood the process of creation:
  
  1 - Create local DB
  2. create the application
  3 publish the application
  a. set permissions
  b. define the tables to synchronize
  4 - get new application on client
  
  I am facing difficulties to create DB: the tables I need already exist in the master repository, so I made a local copy of them.
  
  But I need to use existing views in the master repository: How can I set them as they refer to the tables that are not present in the local database?
  
  The process is not really clear to me.

  (1) create the repository database,
  (2) create publication publication, sequences through the mobile Workbench items
  (3) create a new request through the Packaging Wizard and assign it to your publication
  (4) create users and add them to your application via your mobile manager
  (5) install olite in the client and save it on the server. Run msync in the client, and the client (local) database will be created automatically based on your composition.
  (6) at the end of the msync you will be asked to download and install the application. Select install

  It's about how to do it in a few lines

  I can give you more information, if you need especially in the case of windows mobile apps

• Creation of XML for the E-text report

  Please can help me here since the essential need for Iam BI Publisher.
  
  IAM a following sql query via the editor of shooting
  
  Select bac_lgey_cd as the code,
  bac_lgey_nm as LEName,
  prcs_ef_dt as EffectiveDate,
  bac_nac_cd as AccountCode,
  bac_cctr_cd as Costcenter,
  bac_nac_nm and Descriptions,
  glp_ytd_fnc_net_am as CurrentBalance,
  glp_ptd_avg_fnc_net_am as AverageMTD,
  glp_ytd_avg_fnc_net_am as AverageYTD
  of FDR_BAC_RPT_GLR270_SRC
  where bac_lgey_cd in ('0365')
  
  XML to set is that i get is as follows
  
  
  rowset <>
  < ROW >
  < CODE > 0365 < / CODE >
  < LENAME > BACMER-NEWCO < / LENAME >
  < EFFECTIVEDATE > 2009-07-30T 00: 00:00.000 - 04:00 < / EFFECTIVEDATE >
  < > 101559 ACCOUNTCODE < / ACCOUNTCODE >
  < COSTCENTER > 9842414 < / COSTCENTER >
  < DESCRIPTIONS > ML-CASH-ALL OTHER < / DESCRIPTION >
  < CURRENTBALANCE > 2152.81 < / CURRENTBALANCE >
  < AVERAGEMTD > 2152.81 < / AVERAGEMTD >
  < AVERAGEYTD > 406116.47 < / AVERAGEYTD >
  < / ROW >
  < ROW >
  < CODE > 0365 < / CODE >
  < LENAME > BACMER-NEWCO < / LENAME >
  < EFFECTIVEDATE > 2009-07-30T 00: 00:00.000 - 04:00 < / EFFECTIVEDATE >
  < ACCOUNTCODE > 131864 < / ACCOUNTCODE >
  < COSTCENTER > 9842414 < / COSTCENTER >
  LOANS COMMERCIAL-IC-ML < DESCRIPTIONS > < / DESCRIPTION >
  < CURRENTBALANCE > - 21.56 < / CURRENTBALANCE >
  < AVERAGEMTD > - 21.56 < / AVERAGEMTD >
  < AVERAGEYTD > - 15.59 < / AVERAGEYTD >
  < / ROW >
  < / LINES >
  
  
  Here's what's fault. I want to manipulate the XML output that is generated in the following format.
  
  I need it in the following format as it would be much easier for me to identify the model of my E-text
  
  < data >
  < banner >
  < CODE > 0365 < / CODE >
  < EffectiveDate > 31/07/2009 < / EffectiveDate >
  < AccountName > ML-CASH-ALL OTHER < / AccountName >
  < AccountsInformation >
  < account > 000102261 < / account >
  < CostCenter > 00329200731 < / CostCenter >
  < description > ACQ-DUE TO AIB-PAYROLL-IEP < / Description >
  < / AccountsInformation >
  < AccountsInformation >
  < account > 000102262 < / account >
  < CostCenter > 00329200732 < / CostCenter >
  < description > ACQ-DUE TO AIB-UKS < / Description >
  < / AccountsInformation >
  < / banner >
  < banner >
  < CODE > 0366 < / CODE >
  < EffectiveDate > 31/08/2009 < / EffectiveDate >
  < AccountName > ML-CASH-ALL OTHER < / AccountName >
  < AccountsInformation >
  < account > 000102263 < / account >
  < CostCenter > 00329200733 < / CostCenter >
  < description > ACQ-DUE TO AIB-PAYROLL-IEP < / Description >
  < / AccountsInformation >
  < AccountsInformation >
  < account > 000102264 < / account >
  < CostCenter > 00329200734 < / CostCenter >
  < description > ACQ-DUE TO AIB-UKS < / Description >
  < / AccountsInformation >
  < / banner >
  < / data >
  
  Please can someone help me on this.

  Great, it worked, but not ;) thread closed

• After the creation of buttons for the animation of the layers, how can I change the background layer?

  Created in Illustrator, exported as PDFs in acrobat reader, using the hidden layers, I created buttons to "animate" the map that I've been designing.

  Now, I need to update the map itself in Illustrator (background layer) and I don't want to redo all the buttons, how do I import/change/update of the new updated image without losing all my work?

  Here's a good tutorial if you want to go on the road to JavaScript: http://acrobatusers.com/tutorials/creating-and-using-layers-ocgs-with-acrobat-javascript

• Problem creating discs of recovery for the Satellite L500-126

  Hello

  I have a problem of creation of recovery for the Satellite L500-126 disks.

  I'm using the Toshiba Recovery Disk Creator.

  The 1st disk is ok.
  When I try to do the 2nd drive, the systems stops exactly 50% of the 2nd drive. and no more reaction from the creator of disc.

  I tried 2 x, and every time I had to give up and throw the dvd.

  any suggestions?

  Hello

  You should try another DVD from different manufacturers
  It s nothing unusual that some DVDs are not totally compatible and CD/DVD players cannot write data correctly
  I had this problem in the past and could solve this test and using different DVD.

• Animate the shadow effect

  Is there a way to animate the shadow effect? A hand coming out of the frame and hit something. Need for the shadow to be closer to the hand and then disappear farther than the sheets of hand frame.

  All the parameters are keyframable. Move the pointer over the setting see the + at the end to add a keyframe.