failure of the regular creation of translation for the protocol 50

Similar Questions

• Horizon view 5.2 new installation, failure of the Protocol on desktop computers

  On a new Horizon view 5.2 deployment, I feel a "Protocol failure" status on all workstations put into service. I have not activated or installed Access HTML5, but debugging of virtual offices, the following error log is stored in the file:

  Could not initialize the server BLAST interface, Protocol is not available.

  Which is the expected behavior, because I have not installed the pack of HTML5 features. Can I turn off Blast in the virtual desktop completely, then I will not have "Protocol failure" status on all my desktops?

  I want only active PCoIP.

  Kind regards

  Sven

  Try just to add to the list online during installation:

  ADDLOCAL = Core PCoIP, USB, VPA, VmwVaudio, VmVideo, Appblast

• Domain Services Active Directory could not create the ntds object due to dns settings look for failure on the specific domain controller

  Forest consist of 1 DC server 2003 with all fsmo and 2000 1 domain controller roles.

  Completed all questions of adprep and when I tried to promote server 2008 standard edition to a domain controller, had the error message stating that Active Directory could not create the NTDS settings for the domain active directory CN = NTDS controller

  Settings, cn is 2k8dc1, cn = servers, cn = Default First Site Name, c is Sites, cn = Configuration, dc is Marie-France, dc = com on the ad distance dc server2.amanua.com.

  To ensure that the provided network credentials have sufficient permissions

  "The DSA operation unable to act because of the failure of the dns lookup"

  The idea was to demote the 2000 machine when I completed the installation of 2008.

  Hello

  You can display the query in the link provided to improve assistance:
  http://social.technet.Microsoft.com/forums/en/categories/

• Failure of the system for Windows 8 image backup

  I downloaded Windows 8 a few days ago. I tried to create a system image to an external drive, Western Digital 500 GB (409 GB free) four times and each time after a few minutes a message said that the backup failed. The backup of the recovery Partition seems end OK every time. The failures occurred after a minute or two in the backup of the C: drive of the OS.

  The external hard drive checked OK. The player has already had an image of the system for Windows 7 which was removed before the backup attempt. Here are 2 messages I received as the backup failed. The other 2 were much the same, I think.

  "There was a failure in the preparation of the backup image of any of the volumes in the backup set. (0X807800C).
  The mounted backup volume is inaccessible. Try the operation again. (0X8078004F)."

  "There was a failure in the preparation of the backup image of any of the volumes in the backup set. (0X807800C).
  The specified drive is not found. (0 X 80780081)"

  Below are the 2 files on the external hard drive after the failure. I guess that the first was the complete recovery Partition backup. I don't know much about this sort of thing.

  7da23344-ab79-11e1-887d-806e6f6e6963.vhdx - 7.61 GB
  7da23345-ab79-11e1-887d-806e6f6e6963.vhdx - 7.00 MB

  Anyone have any ideas on the problem? The software only virus on the PC is Windows Defender that came with the operating system.

  Fifth time is a charm, I suppose. I tried saving image system for the fifth time and successfully completed this time. Nothing has changed on my system or readers.

• picture password stopped working, says there is a failure during the registration process please try again tried for 2 days

  picture password stopped working, says there is a failure during the registration process please try again tried for 2 days.  He worked for weeks and then stopped.  I tried to change it and get the same message

  Hello

  You can contact Microsoft on phone, please visit the below mentioned link:

  How and when to contact Microsoft and support Customer Service:
  http://support.Microsoft.com/kb/295539
   
   

• Failure of the load of the inventory... OPatch failed to load the inventory for the Home.OPatch Oracle data failed with the error code = 73

  Hello

  I will apply patch bundle and my oracle database 11.2.0.2 and Microsoft Windows x 86 platform. As read the file Readme Oracle recommends to use OPatch utility version 11.2.0.1.3 or later. To check the inventory availability I use the command lsinventory % ORACLE_HOME%/OPatch/opatch.

  It ended to give details below.

  Citing O 11.2 patch .0.1.1

  OPatch could not create/open history for writing file: * my home oracle path***\cfgtoollogs\opatch\opatch_history.txt

  **ORACLE_HOME***\cfgtoollogs\opatch\opatch_history.txt (access is denied)

  Setup Oracle interim Patch version 11.2.0.1.1

  Copyright (c) 2009, Oracle Corporation.  All rights reserved.

  OPatch could open the log file, the recording is not possible

  Home Oracle: *.

  Inventory Center: C:\Program Files\Oracle\Inventory

  from: n/a

  OPatch version: 11.2.0.1.1

  YES version: 11.2.0.2.0

  YES location: * ORACLE_HOME * \oui

  Location of the log file: **ORACLE_HOME**\cfgtoollogs\opatch\opatch2015-04-09_16-27-49PM.log

  History of patch file: **ORACLE_HOME**\cfgtoollogs\opatch\opatch_history.txt

  Failure of the load of the inventory... OPatch failed to load the inventory for the given Oracle Home.

  LsInventorySession failed: LsInventory failed to create the log directory * ORACLE_HOME * \cfgtoollogs\opatch\lsinv\lsinventory2015-04 -.

  09_16-27 - 49 PM .txt

  OPatch failed with error code = 73

  Can someone please help me solve this problem?

  Do I need to install the last opatch utility?

  Hello

  This error message " LsInventorySession failed: LsInventory failed to create the log directory * ORACLE_HOME * \cfgtoollogs\opatch\lsinv\lsinventory2015-04 - .

  09_16-27 - 49 PM .txt "

  indicates that you have a permission problem with your file systems: cfgtoollogs/ORACLE_HOME/opatch

  Check the owner of this file system.

  Kind regards

• Bulletins of update error: ' error: failure of the verification of signatures for: message XML Update SQL.

  Hi all

  I get this error when when looking for Windows newsletters (Patching-> Windows-> news-> news-> control upgrade). Looking at the Task Manager, I see "error: failure of the verification of signatures for: message XML Update SQL.

  I use the latest version vCM 5.8.2. I found another post here on this subject, which mentioned that the KB 2050220 fixed the problem, but it does not work for me .

  You have any other ideas I could try? Where would the real logs that could help me understand what the problem?

  Thank you.

  Well, what it fixed.  Looked in the debugging information, and indeed it was related to the KB 2050220:

  Level: error

  Time: 17/04/2016 10:53:43:460

  ClassName: clsPatchVerification

  FuncName: VerifyPatch

  MSG: (0) downloaded the file: C:\Program Files (x86)\VMware\VCM\Sum\Collector\SUM2_postxml.sql.cab has not a signature of trust manager of Configuration of VMware. Certificate IssuedTo: The issuer of the certificate VMware, Inc.: SHA2 DigiCert assured ID Code signing CA

  SourceDesc: UI

  RequestId: default

  JobId:

  JobMachineName:

  The problem with the added SQL KB is it is old... is no longer reflecting the reality, as the certificate of the cabin has now SHA2 DigiCert assured ID Code Signing CA, and not DigiCert assured ID Code Signing CA - 1 as written in the query SQL attached to the KB.

  That's why we:

  Original VMware KB:

  SET QUOTED_IDENTIFIER ON

  SET ANSI_NULLS

  IF NOT EXISTS

  (

  SELECT *.

  OF dbo.ecm_sysdat_certificate_configuration_settings_ui

  WHERE configuration_name = "DigiCert assured ID Code Signing CA - 1"

  )

  BEGIN

  INSERT INTO dbo.ecm_sysdat_certificate_configuration_settings_ui

  (

  configuration_name,

  configuration_description,

  is_subject,

  is_issuer,

  is_configuration_allowed,

  last_modified_by_id,

  last_modified_datetime

  )

  VALUES

  (

  "DigiCert assured ID Code Signing CA - 1",

  NULL,

  0,

  1,

  1,

  NULL,

  NULL VALUE

  )

  END

  GO

  FIX:

  SET QUOTED_IDENTIFIER ON

  SET ANSI_NULLS

  IF NOT EXISTS

  (

  SELECT *.

  OF dbo.ecm_sysdat_certificate_configuration_settings_ui

  WHERE configuration_name = "SHA2 DigiCert assured ID Code Signing CA"

  )

  BEGIN

  INSERT INTO dbo.ecm_sysdat_certificate_configuration_settings_ui

  (

  configuration_name,

  configuration_description,

  is_subject,

  is_issuer,

  is_configuration_allowed,

  last_modified_by_id,

  last_modified_datetime

  )

  VALUES

  (

  "DigiCert assured SHA2 Code ID signing CA",

  NULL,

  0,

  1,

  1,

  NULL,

  NULL VALUE

  )

  END

  GO

• Failure of the initial installation of INS-30131 required for execution of the controls of the installer cannot access the temporary location

  When I install Oracle Grid Infrastructure 12 c Release 1 (12.1.0.1.0), I have the following error:

  Failure of the initial installation of INS-30131 required for execution of the controls of the installer cannot access the temporary location

  Cause:-unable to access the temporary location

  Action - make sure that the current user has required permissions to the temporary location

  Details of the addition

  -GLWB-1560: "/tmp/" temporary directory path is shared on the nodes '... »

  The oracle user I use is to have access in / tmp, I did a test by creating a file here.

  Any idea?

  Thank you

  This is the description of the error, I saw, but he was trying to find an idea how to solve this problem.

  Anyway, I solved it by renaming the Group of volumes and accordingly update the fstab and the grub.conf.

  Thank you

  Eugen

• CC have reinstalled due to the failure of the system.  When opened in the image space RAW goes yellow spot, with blue background.  I reinstalled without effect.  At the opening, in RAW, the image is restored for future treatment.  Error occurs with both d

  CC have reinstalled due to the failure of the system.  When opened in the image space RAW goes yellow spot, with blue background.  I reinstalled without effect.  At the opening, in RAW, the image is restored for future treatment.  Error occurs with both dng and arw.  Ideas.

  Try the following:

  In the Camera Raw window, press Ctrl + K (Cmd + K on a Mac) to bring up the preferences.

  Uncheck the box processor graphics use.

  If that suits him, update your graphics driver may allow you to work with the checked graphics processor.

• failure of the system, looking for answers

  Need help for the guys. Had a major failure of the system last week, and I'm a bit confused as to what happened and why I was unable to get free. I lost a bit of my confidence in Vsphere, and I'd like to renew that.

  A bit on the environment, esxi 5.0 U1, with servers HP Gen 8 3 node cluster running. HP P4500 SAN iscsi for vmfs data storage. ESXi is installed on HP's CF cards in servers. This cluster has been upward and running for about 6 months, not a single hiccup before that.

  Wednesday we have migrated 2 of our vm (SQL and progress) to this cluster 5.0 database, the virtual machine went on different hosts in the cluster. The virtual machine was running on a cluster 2 older nodes with esxi 4.1 U2. Machines migrated fine, fine tools updates, reboot, everything seemed fine.

  About 2 hours after that the migration, we started to receive calls that our Progress database is down, users could not connect. Then we started getting more calls, other machines were inaccessible. Glancing from vcenter I could see all the virtual machines in question were on the same host, and I was unable to open the console in vsphere for VMs on that host. The host showed he was connected, showed all the vm connected, but I could not open the console or the desktop remotely to one of the VMs on that host. I started studying, and of course this host fell all the SAN Iscsi network connections. The railways have shown dead. Ports of nic card viewed active, the switch ports showed activity, but the connections were down. I could always ping the address of management for the host however, and ports for vmotion were in place.

  At this point, I started to try and vmotion VMs on that host data base progress, he would not migrate, just sat at 8% prepare to migrate. I tried other virtual machines with the same result. I started to wonder why HA had not kicked, and why I couldn't move anything. At this stage the host started disconnecting from the cluster. I could always ping on the host, but vsphere showed as disconnected. I couldn't move my VM, and I couldn't go to the host via vcenter, via the vsphere client pointed directly to the host, or by using the DCUI.

  So I called VMware support, got an engineer on the line with me, and it became clear we were going to have to power cycle that host and crash all virtual machine running on it. It wasn't a very pleasant for me answer because this database of progress is our main production system, and I was afraid of corruption. We had no choice, so we did. When the host came back upward, fortunately the virtual machine came very well. VMware engineer digging in the newspapers and said that this was with a particular NIC card driver with known issues. He showed me the KB on this issue, and it seemed to be a known issue. We have updated these drivers on all hosts, and that's all.

  My problem with this is that, how is the cluster ran fine for 6 months without problem, and how come the redundant path to the SAN did not keep the connection active when with the path with the bad nic card driver failed? I have 2 different, with 2 NICs different paths for the Iscsi SAN. The other card had no known driver issue. Why both paths failed not just in cause of a driver on one of the cards problem? More worrying is also how is it that I could not immigrate anything, and why no HA kick in?

  Sorry for the novel here, but without all the details is not part of a story. My biggest concern, that's why I couldn't move anything? In the event of a host failure, what you're supposed to do in order to migrate the machines if they don't migrate via vsphere client? We were down for about 2.5 hours, and a lot of questions were thrown on me the senior management as to why my "system available, redundant high" took hours to retrieve...

  Guys here any ideas, thoughts on how I would have handled it differently, reasons why I should be confident everything is fine now?

  Thanks for your time

  Kevin

  trink408 wrote:

  Thanks Matt.

  I guess some of the problem is not completely understand how the HA or Vmotion. I was under the impression once that the virtual machine was not reachable HA wouldn't kick and move the virtual machine? The virtual machine was not to ping requests or accessible by the Office remotely. I couldn't get their power off or do anything through vcenter either.

  If they had no link usable storage, this seems possible.  HA simply does not address the failures of storage.  Not at all.  It IS possible to activate at the level of the VM HA, but it isn't on by default - must be activated on a per-VM basis.  You should read the book by Duncan Epping on this - it's the bible of the AH.

  So in case something happens with the connection of storage, you have really no way to vmotion anything right here, and your only option is to kill the host / VM running on it, and then migrate or leave HA move them?

  Fix.

  I didn't know that I wouldn't be able to vmotion virtual machine if the host has lost its connection to storage. The other hosts in the cluster saw storage.

  The source host is controlling these VMDK, as far as the other guests are concerned (they see a lock on the file) and when they ask the host if its still alive, he answers (because it has not powered the network lost or down, which are the failure mode THAT HA is designed to handle). So they take charge.

  The reason why it took so long was because I didn't kill the host with my concerns for the database. I was hoping that the VMware engineer may have a way to gracefully close things down. So he spent some time looking around and trying to determine what was going on. Ultimately we just power cycle the host, so I could have done much earlier, and if we are facing this again in the future, I would.

  As long as you follow the seller advised for more decent databases (keeping the transaction logs, etc.), don't have good backups, theres no real risk of data corruption.  VMware does not significantly change the i/o path, in order to have the same exposure than on a physical host.

  I still do not understand why the two paths were marked as dead and the host completely lost connection to the SAN, as well as to show finally disconnected in vcenter.

  Well the host went offline because it got stuck in an all-paths-down scenario, which is common for 5.0.  5.1 solves this problem a little.  I don't know why all roads fell, but I suspect that you have a misconfig somewhere... normally you expect at least 4 paths in a system set up correctly on the left.  Check with HP to ensure that you follow best practices.

  Maybe all the IP stack has been corrupted or something?

  Possible, of course, but unlikely.  Never heard before.

  I appreciate the help and the preview, I thought that the problem was a lack of understanding on my part and fully accept it.

  HA and vMotion are complex.  At least now you can go back to mgmt and tell them why he fell more (because it was a failure outside the scope of the software scenario) and may ask for money to build a proper SQL cluster.  Definitely recommend the book of Duncan Epping: http://www.amazon.com/VMware-vSphere-Clustering-Technical-Deepdive/dp/1463658133/ref=la_B002YJMRCY_1_2?ie=UTF8&qid=1363622697&sr=1-2

• Failure of the program

  I use Windows 10 and the Cloud of Photoshop version. When I try to use the eyedropper tool, for example, there is a window that says that the eyedropper tool are unusable due to a failure of the program (I use the Finnish version, so I don't know if it translates to English exactly the same). The PC that I use is powerful and works well, and this problem was not last week. Someone knows what's the problem? Thanks in advance.

  reset your preferences, https://forums.adobe.com/thread/375776

• I have problems to restart of Yosemite, after power failure during the new backup, and now HD is also blocked.

  I have problems to restart of Yosemite, after power failure during the new backup, and now HD is also blocked.

  I tried the holding of 'command-r' and 'option' to see if the problem can be resolved or try any boot from a boot disk, my old backup, USB function start - but after a slow long process it all just stops.

  There is software on my HD that I don't want to lose by simply reformatting the computer, because I am now in a different country, far from my house, which is another problem of the Apple Store, to reinstall my OS from Yosemite on the www.

  Hey AmnonMikeCohen,

  Thank you for being a part of the communities of Apple Support.

  I understand that your Mac is not start properly after the power went out.  Let's start with resetting the SMC and NVRAM on your Mac and see if he can start from there:

  Reset the management system (SCM) controller on your Mac.

  How to reset the NVRAM on your Mac.

  See you soon.

• Interesting solution of failure of the fans occasionally cold start?

  Interesting solution of failure of the fans occasionally cold start?

  Normally I do a reset of the SMC, sometimes it's the solution.

  When kick cooling fans as soon as I start my cold iMac, I just quickly swivel the iMac slowly from right to left and the cooling fans have stopped.

  Strange?

  All the answers?

  Note: I use an iMac 21 inch end 2013-2, 7 GHz Intel Core i5

  Thank you in advance for the answers.

  This sounds like a sensor loose or pinched wire.

  You may be able to see the problem of sensor or sensor wire with the diagnosis of Apple to test or a third party temp. followed by the application, but the best would be to book a service appointment at your local CENTRE.

  Apple Diagnostics using - Apple Support

  https://locate.Apple.com/

• failure of the SIM, why I this message all the time?

  failure of the SIM, why I this message all the time?

  This means that your SIM card is defective or otherwise expired

  Can you make and receive calls and texts?

  If so - go out the SIM card - wait about 45 seconds and re insert it back

  If not - contact your carrier for a new SIM card

  Remove or change the SIM card in your iPhone or iPad - Apple Support

• Pavilion dv6t 7000: failure of the BIOS (Caps lock flashes twice a secone)

  My laptop model number is Pavilion dv6t 7000. In recent days, he had a problem. When I turned off my laptop and put it off, the next day I find that is not starting. A black screen, caps lock shift is blicking twice and f12 key is red (WIFI). Nothigs happen. Then, I searched and came to know that it is the failure of the bios. Then I tried some way and nothings worked. ATLAST when I remove the cmos battery it set again after 2 or 1 minute its starts fine. Then againg I turn off the computer and its power day following again the same problem. I was to solve this problem by removing cmos battery and put it again for 4 or 5 days. But today this tip does not work. I tried so many method like (Windows key + B), (byholding down the power button for 1 minute), (Flash UEFI) etc. to solve the problem of failure of the bios, nothing worked at all. What is the problem?  Is this really a failure of the bios? How can solve this problem? What is a dangerous problem? There the chances that my laptop is completely exhausted?

  Hello
  beep codes or led lights will Flash at the start of the system may indicate a hardware fault or BIOS you say you have tried all the troubleshooting steps
  
  I would like to run the hardware check to make sure it's all working please follow the guide below for instructions and report:
  
  http://support.HP.com/us-en/document/c03467259#AbT1
  
  Tests using UEFI diagnostics and run the quick test
  
  Thank you
  James