Creation of PNG to EPS then resizing/resampling/scaling down the image.

Similar Questions

• Muse optimizes the file original because my pictures in a slide show resizing after I used the image several times.

  IIF I import a picture in my website and make a small size then when I create a slide show and add this photo to my computer it comes too little each time. It's like Muze optimizes the original photo and it's very frustrating. I have to open the picture in Photoshop and save it again to fix it. Very annoying. Is this corrected?

  Muse does not affect the original image, but it maintains a copy of the original. You can check by locking the original image file to prevent the Muse to touch.

  Muse perform optimization at the time export/publish founded the most important instance of the image in the project. In this case, when you re-import the image, Muse is incorrectly assuming that you want the new image at the same size as the first instance which you resized more small. We will study this fixation behavior in the next version, but in the meantime, there is a solution.

  Rather than open the image in Photoshop and resave, which changes the date of the change of the image and the Muse of signals re - import image, try double click until the picture is selected. The selection handles will be smaller and solid, if you have the selected image. The handles will be bigger and more hollow if a container is selected. Resize the image to the desired dimensions. Initially, the image will be pixelated because Muse is always using the already optimized copy. However, if you choose file-> Preview in the browser Page, the image will be optimized for new dimensions and you should see a newer version of resolution in both the browser and on your page in the Muse.

  You can more easily check the behavior of optimization as follows:

  1 place an image to 25% of its original size.

  2. Select the file-> Preview in the browser Page, which will optimize the image to the size of 25%.

  3 duplicate the placed image and resize the duplicate to be twice as big (i.e. 50% of the original). Initially, this duplicate will blur after resizing.

  4. Select the file-> Page Preview in the browser, which will be re - optimize image and redraw at a higher resolution.

• Zoom and then zoom back in AS2 (no scaling of the image)

  Basically, I want to know if there is a way to move from a larger version in something, and then seeing the whole picture in another frame. (By pressing a button)

  Let's say here, it's a tree, I would bascially as (by pressing a button which I can do) to zoom out and see the entire landscape. Is there a way I can do this without actually changing the image size?

  The premise of the zoom is based on scale, so if you are looking for something that does without changing the scale in AS2, there isn't.

• PNG, gif etc... do not load the images

  I tried all the solutions listed on the support page for images which won't load and they do not always load. PNG, gif, etc... just get nothing. I tried to reinstall java java update because had a weeks error message when he tried to install the update, and the program tells of the update has been reinstalled today, but I got an error message 'wrapper' something.

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of your modules is causing your problem (switch to the DEFAULT theme: Tools > Modules > themes).

  • Makes no changes on the start safe mode window.

  See the extensions, themes and problems of hardware acceleration to resolve common troubleshooting Firefox problems and troubleshooting questions with plugins like Flash or Java to solve common Firefox problems

  You can also try to 'Reset all the preferences for the default user of Firefox' at the start of Firefox to solve the issues in Safe Mode window.

  See also http://kb.mozillazine.org/Images_or_animations_do_not_load

• "When I resize a photo for 30 x 45 ' 300 dpi, it becomes large black blocks on the image

  Anyone know who to stop photoshop to do this? "I'm an experienced photoshop user and every time I try to resize my image to make a big impression 30 x 45" I get these blocks. I tried several different resampling options. The images come from a Canon 5 d mark III and a Canon 5 d (50 megapixels) Mark III. The image below illustrates the problem. I use a 2014-15 inch MacBook Pro with 16 GB of memory 2.5 GHz CPU.

  

  HI fasterlight4939,

  This looks like a known bug in code OpenCL Apple MacOS 10.11.

  • Could you please go to the Photoshop preferences and then go to the performance tab.
  • There please click on advanced settings, under graphics processor and set drawing on Basic Mode.
  • And also please uncheck the option "Open GL"
  • Restart Photoshop and then put in a new image and re - size.

  This should avoid the problem until Apple can release a update for the OS problems.

  Kind regards

  Tanuj

• area of text resizing push content down

  Hey everybody,

  So I try to build a site with several background images and functionality of snapscroll. Everything works very well on the break points, but when I go between breakpoints, the text box is resized and pushes down the other text. Accordingly, the position relative to my anchor is lost and everything is blurred.

  How can I make sure that the height of the object on the page remain fixed, while the text retains the possibility to resize between breakpoints?

  Set your text field resize to zero, then adapt for each breakpoint.

  

  

• PS Newb needs help with resizing the image and print several sheet

  Hi, I am using PS CS3 to resize an image, I have so I can print to use as a map for a miniatures game.  I have no problem of scaling of the image to the appropriate size, but I can't understand how to print multiple image 8.5 x 11 sheets.  I thought I saw an option for such a procedure before, but maybe it was in another editing program.  If anyone has any ideas on how I could do this I would really appreciate hearing about them.  Thank you!

  Illustrator and InDesign are tiled printing, like CorelDraw. Photoshop, this title is not, but may be a few script for this. In your case, the simplest solution would be to save the file in PDF format and have Acrobat print a tiled (Page scaling of parameter in Acro print dialog box). You just need to make sure that your page corresponds to several pages. Unliek AI and ID, Acro chop only stuff based on standard paper sizes...

  Mylenium

• I can't wrap my head around resizing/resampling and what is the right way to do it (CS5)

  I know it's probably pretty basic, but it escapes within my reach at the moment.  for some reason, my teacher never really went over this other that say 300 DPI was what you want to get better quality prints, so I have always just sort of worked with this in mind, and has never required much account "resampling" or that he was necessarily, box was just always checked.  im not sure how, or if, I myself was screwing all this time and I know that's not THAT hard so any advice would be appreciated.  and I apologize if this has been exceeded to death, but I wanted to use an example to help understand better (I hope).

  Oh and most of my work I display on the internet, with the idea that it will be printed in the future, or with the idea that she can at least be printed.  I heard about the web, all you need is 72 dpi, but since I expect to be printed I just made 300 DPI and save normally.  It of a bad move on my part and I'm missing something by saving does not 'for the web and devices '?

  example:

  

  so I have an image I downloaded on the internet.  as you can see, it is at 72 dpi and near 12.7x17.7in.

  Let's say I want to enlarge to a same 13 inches and increase the resolution to 300 dpi.

  I'm confused that when I want to uncheck resample.  Since it blocks the pixels, if I increase the resolution the image gets more small and vice versa.  I don't know that I have enter when it's advantageous to have unchecked resample.

  I feel really stupid, because I know this is pretty noobish, but we have barely touched on this and the ability to save for web and devices (not at all) in my design class.  Thanks for any help.

  Resizing is only this; It resizes the image while keeping the number of pixels. Resampling is adding an option to change the number of pixels in the image.

  As a general rule, you'll want to leave resampling of the equation when printing it is mainly used for the screen (monitor) watch one.

• Resizing of photos to the forum posts

  I can't get my photos to reduce the sufficient size for display on an online forum.  I tried the Image/resize but can't seem to adjust the pixels (no choice).  Have tried again and again, only to find that the image is too large.

  Any suggestions?

  In Image > resize > Image size, check the resample and contrain proportions

  boxes and resize up to 1000 pixels or less. For example, if you enter 800 pixels

  for the long side, with contrain proportions controlled, items automatically

  among other value. You don't have to worry about the display resolution

  on the web, just the size of the pixel (dimensions).

  I tend to use the resizing of the image, then use file > save for Web and choose one of

  options jpeg for photos and one of the options png for screenshots.

  You can resize your images in the save for web dialog box, but sometimes

  Save for web chokes on large images, so I just use the image size before you go to save for web.

  

  MTSTUNER

• Graphic resizing function has changed, now crops the image, why?

  I must, without knowing it, changed some settings. So far whenever I bring you in graphic, such as a png or jpg, I can resize using the selection tool (arrow) and in a corner of the image I click, hold down the shift/command (Mac) and then shrink or enlarge the size proportionally. What has changed, it is now, the image does not like that, but rather the same manoeuvre crops the image in the direction where, as in using a mask function, the image doesn't change size but the border of it changes and part of the left image not visible. I guess that there is a setting that I don't know who is doing this, but so far have not been able to understand. Anyone know?

  Any responses appreciated as very frustrating.

  Thank you

  -Richard

  Selection of content will resize itself the image but not the frame.

• Quality of the image after resizing

  Is it possible to resize images without loss of quality. I currently use SnagIt to capture the images and resize it. I have then insert the jpg file in Robohelp 10 and produce documents printed in Word.

  Try to use the PNG rather than JPG format. SnagIt is as good as it gets with the resizing. It also depends what you resize and how that was produced, where you have no control. Also, there is a point beyond which no resizing will lose clarity.

  Other tricks are not so scale but use Snagits Cut Out options to lose part of what you capture. For example, some screens may have lots of white space which can be cut rather then to resize the image.

  See www.grainge.org for creating tips and RoboHelp

  

  @petergrainge

• Resize photos to the long side in the size of the Image

  I want to use the size of the Image in the Image Menu to resize photos on the longer side (example: 3000 x xxxx).  I know that I can do this in the processor for Image and Photo to adapt, but I want to enjoy the new resample in CC2014, preserve the details.  Is it possible to do it in the size of the Image.   Second question is if this is not possible what method of resampling Image Processor and Photo Fit uses it to resample images to a larger size.

  Thanks for the help.

  W Thorne wrote:

  I want to use the size of the Image in the Image Menu to resize photos on the longer side (example: 3000 x xxxx).  I know that I can do this in the processor for Image and Photo to adapt, but I want to enjoy the new resample in CC2014, preserve the details.  Is it possible to do it in the size of the Image.

  Check her resample, interpolation together to preserve the details have a width and height link to force the image resize it current aspect ratio, use of the width or the height of the menu drop down click pixel, set the side you want to be 3000 to 3000. Cannot be batch without a small script to set the long side to 3000

  

  Second question is if this is not possible what method of resampling Image Processor and Photo Fit uses it to resample images to a larger size.

  The standard image of the processor which is part of the Photoshop Image uses made the adjustment to resize the image always interpolation bicubic user. There is a process of image better second plugin script that you can download from the web once installed you will find in the file menu > Automate > Image Processor Pro.  With Image Processor Pro, you can define which method of interpolation should be user for each resized image used. If the script is better then the standard image processor and works under Photoshop CC X got fed up with Adobe and will support no CC in order to preserve the details cannot be resolved.  It would be possible to add an option if the version of Photoshop using the script supports the details preserved, it can be easy to add to the menu drop down and in the code. As you can choose one of the other methods

  

  The Image Photoshop plugin is being implemented in a Photoshop script written in javascript.   It would be very easy to change your copy of "If Image.jsx" always use preserve detail in CC. The must be changed line is an app.activeDocument.resizeImage '(newWidth, newHeight, resolution, ResampleMethod.BICUBIC);  «Change it will only work if Adobe updated the scripting support cc to preserve detail.»  In Adobe CS6 forgotten update scripts to support BicubicAtomatic fix in the superscription CS6 but not the perpetual CS6.  I also note that preserve the details is not an option to interpolation in Photoshop CC preferences for the interpolation of the image.

  

• Drag and drop into Photoshop layer without resizing the image source

  Hello

  I use Photoshop CS5, 64-bit Windows 7.

  I went through the next steps and do so that I'm not:

  1. open an existing file of photopshop.

  2. in the window my file Explorer, select 100 png files and drag to open the photoshop image chart area.

  Result: Photoshop resizes the png file and place it under a coat. She also asked me to commit the sizing for each individual file, I did slip and fall. Sometimes it takes like 100% scale, sometimes, 98%, sometimes of 102%. If I change to 100%, then it is not the original size. The image become larger and blurry.

  Expected result: place 200 png as a separate layer of the photopshop opened without resizing files.

  My png files are icons that do not require resizing. I can't change 200 pictures just to get it to the original size!

  I tried other things:

  I disabled the "Preferences-> general-> Resize Image in Place. I also disabled "Place or Drag Raster Images as smart objects".

  I always get the same result. I don't need anything smart here. Let me only to place images without any intelligent substance!

  I also went to help and google. I couldn't find what I need.

  Thank you!

  You can try file > Scripts > load files into stack.

  MTSTUNER

• Export the images embedded without resizing.

  An old Enigma illustrator I thought I'd see if anyone has solutions to. It is perhaps something changed in CS5.

  When you have an image embedded in an EPS file (for example) and you want to get this image in photoshop and illustrator, but you want that there is no resampling, what are you doing?

  That is a pixel is equal to one pixel, not more not less.

  The only reliable method I have found is to try to put the image so that the information of 'links' indicates that the scale is 100% x 100% and then export at 72 dpi, with something lossless (or copy and paste to the PS).

  The downside is that the mathematics involved are devilishly difficult (at least for me, maybe I wasn't paying attention that day at school).

  No idea what the multiplier would be to get up to 100 20.935 (4 point something).

  I would like to find a better solution. Or equation, I guess. Ideas anyone?

  

  Save to PDF and open it in Photoshop, where a dialog box appears and offers you the possibility to extract the images to their resolution. Give it a try

• Can I import images that can then be used to customize the appearance of my files?

  I would like to be able to really customize the way in which my look through my files. But the icons in the properties, customize, change the icon section, are not suitable.

  So I can import images from the internet that can serve it really customize how my look through my files, and if so how do I?

  I am aware of how to import images from the internet, but do not know how to use then as an image to icon for my records.

  Yes, in the change icon customize navigate to the location of your .ico files. Several images of downloadable icons are .gif, .jpg, .png, files etc you will need to convert the .ico files.

  See this thread:
  will not recognize the icons downloaded as files icon
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-desktop/will-not-recognise-downloaded-icons-as-icon-files/c2a1d0c0-a91c-4834-913a-c6fa9d699fbd