Creation of the NSX for IP (iSCSI) storage

Similar Questions

• vDS now comes with the NSX for vSphere

  Hello

  I found a few kb articles saying that we can use vDS on any edition of vSphere with the NSX.

  http://KB.VMware.com/kb/2135310

  • If you are using VMware vSphere 5.5 update 3 or vSphere 6.0.x, NSX VMware vSphere 6.x does not require a license of vSphere Enterprise Plus and can run on any edition of vSphere.

  http://KB.VMware.com/kb/1010555

  • Note: vDS is now delivered with NSX to vSphere (NSXv) and VMware Virtual SAN (VSAN) in vSphere 6.0.

  
  

  I've implemented the vSphere environment with the standard license and NSX for vSphere with the license of the company.

  But I can't use vDS. If I can create new vDS on vCenter, I can't add hosts with standard license to a vDS.
  

  
  

  I used below products.

  
  

  • ESXi 6.0.0
  • vCSA 6.0.0.
  • NSX for vSphere 6.2.1

  
  

  Have someone at - he tried vSphere standard with NSX license ?

  If I could, might have some tips?

  Any kinds of comments would be greatly appreciated.

  Thank you

  Danne

  Thank you. In this case, I think you're right. I have not tried specifically because I rarely see Standard.

  Please open an SR for support can examine why this is happening. Sorry I can't be more help.

• Assistance with the creation of the VM for the automation of laboratory and criticism

  Being a novice at scripting powershellCLI from scratch, I managed to put together a script to automate the creation of virtual machines for my ESXi5.1 training laboratory. Some of my orders have been adapted from Luc - D blog. Many thanks for your great blog.

  I have a list of virtual computers that have different OS, memory, CPU, disk, NetworkPort, ISOPath, FloppyDrive etc.

  
  Here's the routine I created to go after using the help of VMware PowerCLI and the reference and examples of the VMware community. I would like to help to be able to optimize the code to speed up the processing, because it does not have enough in the process, I tried to use the | Out-Null but it does not seem to turn off the output. I also wanted to know how read a CSV file parameters and phase of each virtual machine created by feeding one after the other time it has been fully configured, as remotely via VMTools looking for the existence of a file or setting on a virtual machine before the next VM is created in order--something like a configuration of vAPP. I tried the CSV file, but only managed to partially run my script is included below:
  Finally, when it's time to clean up a script to check if the virtual machine is turned on then turn off and delete the inventory and drive of the virtual computer. (I think I could manage removing relatively easily). Hope my request is not a big ask.

  Thanks in advance.

  
  # Connect to vSphere Host with root

  $date = get-Date

  $ESXhost = Read-Host "enter the host ESX or IP name.

  $username = Read-Host "Username".

  $password = Read-Host "Password."

  SE connect-VIServer-Server $ESXhost - User $username - Password $password

  
  # Create DC

  $VMname = "Lab_DC".

  New-VM - VMHost $ESXhost - CD - name $VMname - MemoryMB 512 - NumCPU 1 - Version v9 - ID windows7Server64Guest-Floppy - Datastore LUN1-DiskGB 15 - DiskStorageFormat thin - Notes '$VMname AutoDeployed on $date.

  Get - VM $VMname | Get-CDDrive. Game-CDDrive - ISOPath "[Host3] VM/Lab_Local\WIN2K8R2SP1_CUST.» "ISO" - StartConnected $true - confirm: $false

  $DelayValue = "5000".

  $vm = get - VM $VMname | Get-View

  $vmConfigSpec = new-Object VMware.Vim.VirtualMachineConfigSpec

  $vmConfigSpec.BootOptions = new-Object VMware.Vim.VirtualMachineBootOptions

  $vmConfigSpec.BootOptions.BootDelay = $DelayValue

  $vmConfigSpec.flags = new-Object VMware.Vim.VirtualMachineFlagInfo

  $vmConfigSpec.flags.enableLogging = $false

  $vm. ReconfigVM_Task ($vmConfigSpec)

  Get - VM $VMname | Get-NetworkAdapter | Together-NetworkAdapter - NetworkName "Lab_Local" - confirm: $False

  FloppyDrive get - VM $VMname | Game-FloppyDrive - FloppyImagePath "Automate/BootFloppies/LAB-DC.flp [build]" - StartConnected $true - confirm: $false

  Most of the time the foregoing successfully created the virtual machine, but I have about 20 MV that I need to build/remove and the only way I can do it is by adding the individual game published for each virtual computer orders - it isn't nice to handle, so I tried to add a loop foreach to read the name of the virtual machine and the settings for each computer virtual to a CSV file.

  The CSV file is formatted as follows:

  VMName MemoryMB NumCpu Version, ID, Datastore, DiskGB, ISOPath, NetworkName, FloppyPath

  Lab_DC, 512, 1, v9, windows7Server64Guest, Lun1, 15, [Host3] VM/Lab_Local\WIN2K8R2SP1_CUST. ISO, Lab_Local, Automate/BootFloppies/LAN-DC.flp [build]

  Lab_VC, 2048, 1, v9, windows7Server64Guest, Lun2, 20, [Host3] VM/Lab_Local\WIN2K8R2SP1_CUST. ISO, Lab_Local, Automate/BootFloppies/LAN-VC.flp [build]

  I tried to add this to "test" as below, but it seems to work partially. It fails to set the path of the ISO, disk path and the Network Port correctly - could not understand how to properly use the BootOptions so I left it.

  $VMs = import-CSV - UseCulture b:\automate\servers.csv

  New-VM - VMhost Host3 - CD-name $VM. VMName - MemoryMB $VM. MemoryMB - NumCPU $VM. NumCPU-Version $VM. Version - ID $VM. ID-floppy - Datastore $VM. Store data-DiskGB $VM. DiskGB - DiskStorageFormat 'thin' - Notes '$name Auto deployed on $date.

  Get - VM $VM | Get-CDDrive. Game-CDDrive - ISOPath $VM. ISOPath - StartConnected $true - confirm: $false

  Get - VM $VM | Get-NetworkAdapter | Together-NetworkAdapter NetworkName - $VM.NetworkName - confirm: $False

  FloppyDrive get - VM | Game-FloppyDrive - FloppyImagePath $VM. FloppyPath - StartConnected $true - confirm: $false

  This is the result I get from the routine above.

  Name	Use of the port
  ----	----  ----
  Host3	root of 443

  WARNING: The 'Description' of type VirtualMachine property is deprecated. Use the property "Note".

  WARNING: The 'Hard drives' property type VirtualMachine is discouraged. The "Get-hard drive" cmdlet instead.

  WARNING: The 'NetworkAdapters"type VirtualMachine property is deprecated. The cmdlet "Get-NetworkAdapter" instead.

  WARNING: The 'UsbDevices' of type VritualMachine property is obsolete. Use the "Get-UsbDevice" cmdlet instead.

  WARNING: The 'CDDrives' of type VitrualMachine property is obsolete. Use the "Get-CDDrive" cmdlet instead.

  WARNING: The 'FloppyDrives"type VirtualMachine property is deprecated. Use the "Get-FloppyDrive" cmdlet instead.

  WARNING: The 'Host' of type VirtualMachine property is deprecated. Use the property "$vmhost".

  WARNING: The "HostId" type VirtualMachine property is deprecated. Use the property "VMHostId".

  Get-FloppyDrive: it lacks an argument for the parameter "VM". Specify a parameter of type ' VMware.VimAutomation.ViCore.Type

  s.V1. [Inventory.VirtualMachine] ' and try again.

  To b:\Automate\Various Scripts\CreateVM.ps1:48 tank: 20

  + Get-FloppyDrive - VM < < < < | Game-FloppyDrive - FloppyImagePath $VM. FloppyPath - StartConnected $true - confirm: $false

  	+ CategoryInfo	: InvalidArgument: (:)) [Get-FloppyDrive], ParameterBindingException)
  	+ FullyQualifiedErrorId: MissingArgument, VMware.VimAutomation.ViCore.Cmdlets.Commands.VirtualDevice.GetFloppyDriv

  e

  Ah, my mistake, I don't check your code.

  Inside the loop, the script must use the variable $_ instead of the variable $VM to the New - VM.

  The variable $_ will have extracted the CSV file line.

  I've updated the code above. Give him another chance.

• Satellite X 200-how to find the configuration of the BIOS for Intel Matrix Storage?

  Hello world

  I'm ready to activate the feature Matrix Storage on my Satellite X 200 - 24 X. The problem is that I can't find any relevant option in the BIOS setup...
  Thank you!

  Hello

  Intel Storage Manager is a pilot and not an option in the BIOS. The only option you have in the BIOS is the mode of access to the HARD drive. There you can change between AHCI and Compatible.

  For AHCI mode which is faster, you need Intel Storage Manager driver. For the Compatible mode, you n t need additional drivers.

  Want to know how to install Storage Manager? Just use the forum search, you will find hundreds of results. ;)

• Creation of the folios for Android

  Dear Adobe community,

  before this started, I get:

  • I'm using InDesign CS6 Digital Publishing Suite,
  • running on a Professional subscription
  • and I'm not a native speaker. So please take pity with me ;-)
    

  
  

  Some time ago, I created ten folios through an application multi-folio with in-app purchases for the Apple iStore, ran into some issues (which have been resolved by Bob Bringhurst, thank you once again) and now I want to develop for Android. The creation itself was easy, that slips are already online, but do not without falling on key issues.

  To define my problem:

  • The splash screen does not. Only, it takes as much space as possible and grows around a third of the screen. Is there a "fit screen" - box, I missed?
  • The graphics look "rough", naked pixels in a sort of 8-bit-look without the edges soft (or feathers), even if they are PDF. I can't convert them to JPEG format, because I use the same folios as I do for Apple.
  • The effects of the erasure of all overlays are also rough. Slide shows, for example, are punching through their content, without letting that images fade out in the next. Maybe it's important to mention: they were created through the slide show option in the Folio Overlay-menu. The same problem occurs with all the contents that appear and disappear. For example: If you activate a card with a button (i.e. telling the app, to pass the object to the empty state 1 in filled State 2), the application takes one second and the map appears hard, smashing into the window from one moment to another, without the bland smooth as it does on Apple products.
  • And after some time, a minute or two, the application crashes, leaving the customer blocked for a moment, before him eject to the main screen of his camera.

  So far, this is my problem. Honestly, I feel that I missed a few easy step, but necessary for the expansion of Android. Now, the look of folios as some pre-pre-alpha release an Android (with dull graphics and blocks every 60 seconds), while they work fine and smooth on Apple.

  I would be grateful for any advice.

  BIS denn of Germany,

  Maximilian

  This article should help:

  Digital Publishing Suite help | Development of DPS native apps for Android devices

  Depending on your content, you can use a different account for your Android application.

• Creation of the database for the HRMS 8.9 and 8.49 PT on SQL Server 2005

  Hello
  I have a problem when running database for HRMS 8.9 Wizard and 8.49 PT on SQL Server 2005. The wizard create the database, create and complete all tables but when trying to create the last display of the script produces this error
  
  Create view EO_MSGOWNRID_VW
  SQL mode: error 2: 16102
  End: Monday May 10 14:00:06 2009
  Unsuccessful end
  
  I reinstall HRMS database and run the wizard several times with the same result. I also install Service pack 3 to sql 2005 bu nothing...
  No idea what could be the problem?
  Thanks for the help
  Fernando

  user10990985 wrote:
  Hello
  I have a problem when running database for HRMS 8.9 Wizard and 8.49 PT on SQL Server 2005. The wizard create the database, create and complete all tables but when trying to create the last display of the script produces this error

  Create view EO_MSGOWNRID_VW
  SQL mode: error 2: 16102
  End: Monday May 10 14:00:06 2009
  Unsuccessful end

  The mistake is not on EO_MSGOWNRID_VW, but this point of view is the last of the build. You need to check the load log file and search for the string "SQL error" or something similar that indicate which view is currently in an error state. After your exit, two views creation failed.

  Nicolas.

• Bug in the creation of the window for Z10?

  I have a level camera called soft.  I just find that, thanks to a report the user, everything is turned 90 degrees.

  The application works on the PlayBook, Dev Alpha A, B and C without problems.  After some debugging, I noticed that when a new form is created for the view finder window, it has a rotation of 90, but which does not occur in the Alphas of Dev and PlayBook.  I'm building the app with the 2.1 SDK.  Why the Z10 returns a screen is in landscape when all Dev Alphas don't do that?  Is this a bug?

  Because the viewfinder in photo on QC of the Z10 variants can't stand rotation.   (camera_get_photo_vf_rotations() call you would say that).

  Given that all cameras are devices in landscape, you get a window without rotation.  If you were to read camera_get_photovf_property back (handle, CAMERA_IMGPROP_ROTATION, & tempInt);   you won't find that on the material of the PlayBook and TI (Dev Alphas), it is set to 0, but on QC Z10 hardware, it will be 90 or 270.

  If you do not need to capture still images, I recommend using the video viewfinder instead.  The video viewfinder works at a higher framerate and a lot more available resolutions and also supports all values of rotation 4.  0 should be the default, but you can set CAMERA_IMGPROP_ROTATION to 0 just to be sure.

  If you wish to continue using the viewfinder of the photo, you can just read back the value CAMERA_IMGPROP_ROTATION and apply then SCREEN_PROPERTY_ROTATION to the viewfinder window is displayed correctly.

  I would say that if you switch to video mode, you call camera_get_video_vf_resolutions() and choose the smallest resolution which is still greater than the resolution of your screen, to not be too wasteful.  (eg. a 1080 p video is useless, as it is to be reduced to fit on your screen to 1280 x 720).  This is not strictly necessary, but will perhaps save about 20 MB of video memory.

  See you soon,.

  Sean

• Creation of the invoice for a specific provider number

  When the user tries to create an invoice from a supplier, it is able to query the name of the provider, the site. But arriving at the date of the invoice the system not allow him to move.

  There is no error message.

  Grateful if someone can identify me with a workaround or a solution.

  Workaround solution - (disable this provider and then create a new.) However it will have an impact if there are unpaid invoices for the supplier, etc.)

  

  Thank you

  I hope that you have already checked if this provider is located in an active or inactive state.

  You can create a new provider & you can use the provider merge feature to merge existing provider to the new provider.

• creation of the loop for a Boolean value

  Hello
  
  I'm still a beginner at so forgive me if this sounds simple...
  
  I created 16 Boolean values with all the false value.
  
  Now with a loop for, I try to create 16 buttons, and when each button is pressed, the respective boolean compared to this button will change to true. Looks something like below:
  
  Somehow, this does not work... someone can point me to an error in the coding? Thank you very much!
  
  
  

  Couple things...

  It is standard for a button work onRelease, not delivery.

  -at your service delivery made reference to the button. Not the root
  panel mounting as you probably want to target. The real problem, however, is the
  the reference to I in the button. If you do a trace (i); within the delivery
  you will find that each button will trace 17. This is because the button don't
  not to maintain a local reference to i - just button refer to the final
  value of i in the main timeline... it's called scope. Sometimes issues of concern
  can be a real challenge. What you need to do is to create a local variable
  in the buttons and I store it in this variable.

  for (var i = 1; i)<= 16;="" i++)="">
  This ["button" + i] .i = i;
  This ["button" + i] .onPress = function() {}
  This ._parent ['status' + this.i] = true;
  }
  }

  --
  Dave-
  Developer leader
  www.blurredistinction.com
  Adobe Community Expert
  http://www.Adobe.com/communities/experts/

• Error in creation of the GTC for sql 2005 in IOM 9.1.0.1

  Good day friends.
  I have a problem trying to create a GTC in IOM 9.1.0.1
  Journal:
  
  2010-01-18 23:36:41, 953 DEBUG [OIMCP. DATC] class/method: DBProvisioningTransportProvider/initialize is entered.
  2010-01-18 23:36:41, 953 DEBUG [OIMCP. DATC] class/method: DBProvisioningTransportProvider/initialize - data: pilot - value: com.microsoft.sqlserver.jdbc.SQLServerDriver
  2010-01-18 23:36:41, 953 DEBUG [OIMCP. DATC] class/method: DBProvisioningTransportProvider/initialize - data: url - value: jdbc:sqlserver://192.168.1.160:1433
  2010-01-18 23:36:41, 953 DEBUG [OIMCP. DATC] class/method: DBProvisioningTransportProvider/initialize - data: username - value: its
  2010-01-18 23:36:41, 953 DEBUG [OIMCP. DATC] class/method: DBProvisioningTransportProvider/initialize - data: password - value: *.
  2010-01-18 23:36:41, 953 DEBUG [OIMCP. DATC] class/method: DBProvisioningTransportProvider/initialize - data: parentContainerName - value: VKUSERS
  2010-01-18 23:36:41, 953 DEBUG [OIMCP. DATC] class/method: DBReconTransportProvider/convertCSVToArraylist entered.
  2010-01-18 23:36:41, 953 DEBUG [OIMCP. [DATC] class/method: DBReconTransportProvider/convertCSVToArraylist - data: run time parameters - value:]
  2010-01-18 23:36:41, 953 DEBUG [OIMCP. [DATC] class/method: DBProvisioningTransportProvider/initialize - data: childContainerTableNames - value:]
  2010-01-18 23:36:41, 953 DEBUG [OIMCP. DATC] class/method: DBProvisioningTransportProvider/initialize - data: parentContainerUniqueKey - value:
  2010-01-18 23:36:41, 953 DEBUG [OIMCP. DATC] class/method: DBProvisioningTransportProvider/initialize - data: statusField - value:
  2010-01-18 23:36:41, 953 DEBUG [OIMCP. DATC] class/method: DBProvisioningTransportProvider/initialize - data: statusFieldLookup - value:
  2010-01-18 23:36:41, 953 DEBUG [OIMCP. DATC] class/method: DBProvisioningTransportProvider/initialize left.
  2010-01-18 23:36:41, 953 DEBUG [OIMCP. DATC] class/method: DBProvisioningTransportProvider/initialize - data: dbDateFormat - value:
  2010-01-18 23:36:41, 953 DEBUG [OIMCP. DATC] class/method: DBProvisioningTransportProvider/defineMetadata entered.
  2010-01-18 23:36:41, ERROR 968 [OIMCP. DATC] class/method: some problems with DBProvisioningTransportProvider/defineMetadata: DB_LOAD_DRIVER_CLASS_ERROR
  com.thortech.xl.gc.exception.DBException: DB_LOAD_DRIVER_CLASS_ERROR
  to com.thortech.xl.gc.impl.common.DBFacade. < init >(Unknown Source)
  at com.thortech.xl.gc.impl.prov.DBProvisioningTransportProvider.getDBFacade (unknown Source)
  at com.thortech.xl.gc.impl.prov.DBProvisioningTransportProvider.getSchema (unknown Source)
  at com.thortech.xl.gc.impl.prov.DBProvisioningTransportProvider.detectMetadata (unknown Source)
  at com.thortech.xl.gc.impl.prov.DBProvisioningTransportProvider.defineMetadata (unknown Source)
  at com.thortech.xl.webclient.actions.CreateConnectorAction.getGenericAdapter (unknown Source)
  at com.thortech.xl.webclient.actions.CreateConnectorAction.imageScreen (unknown Source)
  at com.thortech.xl.webclient.actions.CreateConnectorAction.goNext (unknown Source)
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  at java.lang.reflect.Method.invoke(Method.java:597)
  at org.apache.struts.actions.DispatchAction.dispatchMethod(DispatchAction.java:280)
  at com.thortech.xl.webclient.actions.tcLookupDispatchAction.execute (unknown Source)
  at com.thortech.xl.webclient.actions.tcActionBase.execute (unknown Source)
  at com.thortech.xl.webclient.actions.tcAction.execute (unknown Source)
  at com.thortech.xl.webclient.actions.CreateConnectorAction.execute (unknown Source)
  at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
  at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
  at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
  at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:710)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
  at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
  at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
  at com.thortech.xl.webclient.security.SecurityFilter.doFilter (unknown Source)
  at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
  at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
  at org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:96)
  at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
  at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
  at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:230)
  at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:175)
  at org.jboss.web.tomcat.security.SecurityAssociationValve.invoke(SecurityAssociationValve.java:182)
  at org.jboss.web.tomcat.security.JaccContextValve.invoke(JaccContextValve.java:84)
  at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127)
  at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
  at org.jboss.web.tomcat.service.jca.CachedConnectionValve.invoke(CachedConnectionValve.java:157)
  at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
  at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:262)
  at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:844)
  at org.apache.coyote.http11.Http11Protocol$ Http11ConnectionHandler.process (Http11Protocol.java:583)
  to org.apache.tomcat.util.net.JIoEndpoint$ Worker.run (JIoEndpoint.java:446)
  at java.lang.Thread.run(Thread.java:619)
  Caused by [nested Exception]:
  java.lang.ClassNotFoundException: ADP ClassLoader load failure: com.microsoft.sqlserver.jdbc.SQLServerDriver
  at com.thortech.xl.dataobj.tcADPClassLoader.findClass (unknown Source)
  at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
  at java.lang.ClassLoader.loadClass(ClassLoader.java:252)
  at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:320)
  at java.lang.Class.forName0 (Native Method)
  at java.lang.Class.forName(Class.java:169)
  to com.thortech.xl.gc.impl.common.DBFacade. < init >(Unknown Source)
  at com.thortech.xl.gc.impl.prov.DBProvisioningTransportProvider.getDBFacade (unknown Source)
  at com.thortech.xl.gc.impl.prov.DBProvisioningTransportProvider.getSchema (unknown Source)
  at com.thortech.xl.gc.impl.prov.DBProvisioningTransportProvider.detectMetadata (unknown Source)
  at com.thortech.xl.gc.impl.prov.DBProvisioningTransportProvider.defineMetadata (unknown Source)
  at com.thortech.xl.webclient.actions.CreateConnectorAction.getGenericAdapter (unknown Source)
  at com.thortech.xl.webclient.actions.CreateConnectorAction.imageScreen (unknown Source)
  at com.thortech.xl.webclient.actions.CreateConnectorAction.goNext (unknown Source)
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  at java.lang.reflect.Method.invoke(Method.java:597)
  at org.apache.struts.actions.DispatchAction.dispatchMethod(DispatchAction.java:280)
  at com.thortech.xl.webclient.actions.tcLookupDispatchAction.execute (unknown Source)
  at com.thortech.xl.webclient.actions.tcActionBase.execute (unknown Source)
  at com.thortech.xl.webclient.actions.tcAction.execute (unknown Source)
  at com.thortech.xl.webclient.actions.CreateConnectorAction.execute (unknown Source)
  at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
  at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
  at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
  at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:710)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
  at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
  at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
  at com.thortech.xl.webclient.security.SecurityFilter.doFilter (unknown Source)
  at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
  at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
  at org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:96)
  at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
  at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
  at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:230)
  at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:175)
  at org.jboss.web.tomcat.security.SecurityAssociationValve.invoke(SecurityAssociationValve.java:182)
  at org.jboss.web.tomcat.security.JaccContextValve.invoke(JaccContextValve.java:84)
  at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127)
  at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
  at org.jboss.web.tomcat.service.jca.CachedConnectionValve.invoke(CachedConnectionValve.java:157)
  at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
  at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:262)
  at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:844)
  at org.apache.coyote.http11.Http11Protocol$ Http11ConnectionHandler.process (Http11Protocol.java:583)
  to org.apache.tomcat.util.net.JIoEndpoint$ Worker.run (JIoEndpoint.java:446)
  at java.lang.Thread.run(Thread.java:619)
  2010-01-18 23:36:42, ERROR 015 [XELLERATE. WEBAPP] class/method: CreateGenConnectorAction/imageScreen some problems: provider Exception
  java.lang.Exception: provider Exception
  at com.thortech.xl.webclient.actions.CreateConnectorAction.getGenericAdapter (unknown Source)
  at com.thortech.xl.webclient.actions.CreateConnectorAction.imageScreen (unknown Source)
  at com.thortech.xl.webclient.actions.CreateConnectorAction.goNext (unknown Source)
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  at java.lang.reflect.Method.invoke(Method.java:597)
  at org.apache.struts.actions.DispatchAction.dispatchMethod(DispatchAction.java:280)
  at com.thortech.xl.webclient.actions.tcLookupDispatchAction.execute (unknown Source)
  at com.thortech.xl.webclient.actions.tcActionBase.execute (unknown Source)
  at com.thortech.xl.webclient.actions.tcAction.execute (unknown Source)
  at com.thortech.xl.webclient.actions.CreateConnectorAction.execute (unknown Source)
  at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
  at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
  at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
  at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:710)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
  at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
  at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
  at com.thortech.xl.webclient.security.SecurityFilter.doFilter (unknown Source)
  at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
  at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
  at org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:96)
  at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
  at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
  at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:230)
  at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:175)
  at org.jboss.web.tomcat.security.SecurityAssociationValve.invoke(SecurityAssociationValve.java:182)
  at org.jboss.web.tomcat.security.JaccContextValve.invoke(JaccContextValve.java:84)
  at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127)
  at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
  at org.jboss.web.tomcat.service.jca.CachedConnectionValve.invoke(CachedConnectionValve.java:157)
  at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
  at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:262)
  at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:844)
  at org.apache.coyote.http11.Http11Protocol$ Http11ConnectionHandler.process (Http11Protocol.java:583)
  to org.apache.tomcat.util.net.JIoEndpoint$ Worker.run (JIoEndpoint.java:446)
  at java.lang.Thread.run(Thread.java:619)
  Caused by: com.thortech.xl.gc.exception.ProviderException: DB_LOAD_DRIVER_CLASS_ERROR
  at com.thortech.xl.gc.impl.prov.DBProvisioningTransportProvider.defineMetadata (unknown Source)
  ... 39 more
  Caused by: com.thortech.xl.gc.exception.DBException: DB_LOAD_DRIVER_CLASS_ERROR
  to com.thortech.xl.gc.impl.common.DBFacade. < init >(Unknown Source)
  at com.thortech.xl.gc.impl.prov.DBProvisioningTransportProvider.getDBFacade (unknown Source)
  at com.thortech.xl.gc.impl.prov.DBProvisioningTransportProvider.getSchema (unknown Source)
  at com.thortech.xl.gc.impl.prov.DBProvisioningTransportProvider.detectMetadata (unknown Source)
  ... more than 40
  
  Some suggestions to correct the problem.
  
  Thank you

  It should work if you put in $OIM_HOME/xellerate/ThirdParty only

• The creation of Group of disks with clever storage capabilities enabled? Attribute of Req

  Hi Experts,
  
  We have a single query about the "creation of the disk group with Smart storage capacities Enabled? Attributes of Req? How to set and list of minimum parameters
  
  -Vincent

  Hi Vincent,.

  Basically, it should set the following parameters for exadata smart storage features:

  compatible.RDBMS a.
  compatible.asm b.
  c. cell.smart_scan_capable

  Also, please update what is the version of database Oracle & Exadata version...

  It could be that useful...

  Thank you
  LaserSoft

• The synchronized application: creation of menu items for each call to makeMenu SQLite?

  A matter of design, which is a good implementation of the following?

  My requirements are:

  1. Have a different menu for each screen.
  2. The battery of the screen will be high both a single screen.
  3. To switch screens, the user must use the menu.

  I created the menu for each screen by the following:

  protected void makeMenu(Menu menu, int instance) {
  super.makeMenu(menu, instance);
  Database db = null;
  try {
  
    db = ResourceManager.getConnection(true);
    mCoffeeDao = new FlavshellDao();
    mTabDao = new FlavmDao();
  
    if (instance == Menu.INSTANCE_CONTEXT) {
        Bitmap logoWbg = Bitmap.getBitmapResource(resource
                .getString(ScoreCenterResource.logo));
        Image image = ImageFactory.createImage(logoWbg);
  
        gMenu.setIcon(image);
        nMenu.setIcon(image);
        aMenu.setIcon(image);
        shMenu.setIcon(image);
        avMenu.setIcon(image);
        logoMenu.setIcon(image);
  
        menu.add(gMenu);
        menu.add(nMenu);
        menu.add(aMenu);
        menu.add(shMenu);
        menu.add(avMenu);
        menu.add(logoMenu);
    }
  
    if (instance == Menu.INSTANCE_DEFAULT) {
        menu.add(logMenu);
        menu.add(exitMenu);
  
        shell = mCoffeeDao.findAll();
  
        for (int i = 0; i < shell.length; i++) {
            Flavshell m = shell[i];
            /**
             * Ordering parameter, lower values are placed closer to the
             * top of the menu screen.
             */
            item = new FlavMenuItem(m.getPk(), m.getFlavortitle(),
                    200 + i);
            menu.add(item);
        }
  
        String[] params = {
            Integer.toString(this.mCoffeePk)
        };
        Flavm[] m = mTabDao.findByDynamicWhere("FLAVOR = ?",
                params);
  
        if (m.length > 0) {
            for (int j = 0; j < m.length; j++) {
                if (m[j] != null) {
                    Flavm specificMenu = m[j];
                    item = new FlavMenuItem(specificMenu.getPk(),
                            specificMenu.getTitle(), 100 + j);
                    menu.add(item);
                }
            }
  
            menu.add(MenuItem.separator(105));
        }
    }
  
  } catch (FlavshellDaoException e) {
    Logger.logEventError(e.getMessage());
  
  } catch (FlavmDaoException e) {
    Logger.logEventError(e.getMessage());
  
  } finally {
    try {
        db.close();
    } catch (DatabaseException e) {
        Logger.logEventError("Menu Database error: " + e);
    }
  }
  

  I created a database with a single link object read in the following text:

  public synchronized static final Database getConnection(
      final boolean readOnly) {
  Database db = null;
  try {
      URI userFileURL = URI.create(System
              .getProperty("fileconn.dir.memorycard")
              + resource.getString(CoffeeHouseResource.db_path)
              + resource.getString(CoffeeHouseResource.db_name));
  
      db = DatabaseFactory.open(userFileURL, readOnly);
  
  } catch (MalformedURIException e) {
      Logger.logError("Get connection: URI: " + e.getMessage());
  } catch (ControlledAccessException e) {
      Logger.logError("Get connection: Controlled Access: "
              + e.getMessage());
  } catch (DatabasePathException e) {
      Logger.logError("Get connection: Database Path: "
              + e.getMessage());
  } catch (DatabaseIOException e) {
      Logger.logError("Get connection: Database IO: "
              + e.getMessage());
  } catch (Exception e) {
      Logger.logError(e.getMessage());
  }
  return db;
  }
  

  My question is,

  • If the user to call the menu as happening in any other activity database (SQLite), making the synchronized method will prevent database locks?
  • Should I design my makeMenu got a call from the database at all? It seems to me that all this works, this could potentially cause a lot of traffic on the SQLite database?
  • I thought to move the menu to a vector and storing the menu in storage Runtime, but I read that the Runtime Storage has the memory leak issues?

  Your basic design principles seem well - I have a number of applications that actually have "tabs" screens, so clicking on a tab or using the menu swaps from one screen to the other.  You can just push the new screen and pop, that. In fact, here's a menu from a screen, that I am currently working:

  _StatsMenu MenuItem = new MenuItem ("Stats", 110, 10) {}
  public void run() {}
  UiApplication.getUiApplication () .pushScreen (new StatsScreen (System.currentTimeMillis (), 0));
  UiApplication.getUiApplication () .popScreen (BaseScreenWithToolBar.this);
  }
  };

  While I haven't looked in detail, but your code dangerous look.

  I've never tested, but I suspect makeMenu is called using the EventThread.  Doing things like database connections in this method will cause you problems.  Do not.  If you need to query the database, do so before makeMenu is called.  Starts a separate Thread and set the appropriate menus if this Thread is not finished.  or block the user interface, until he made.

  In addition, I wouldn't do it in makeMenu:

  Bitmap logoWbg = Bitmap.getBitmapResource (resource
  .getString (ScoreCenterResource.logo));
  Image image = ImageFactory.createImage (logoWbg);

  You can do it once to the creation of the screen, or better yet, once at startup and save it in a shared domain.

  If you do not want to create a dynamic menu, then use the normal persistent store - or check out the details for the database once at startup and use them after that RAM.

  And avoid lifting heavy objects in makeMenu.

  I hope this helps.

• How to set an MTU of 1600 for test Lab at home for the NSX on Vmware workstation

  Hello.

  I'll set up a laboratory at home to build a laboratory to the NSX. I am running 3 on VMware Workstation 11 Esxi hosts. All three hosts of esxi run each 4 Ethernet adapters on them.

  To configure installation VXlan for my lab at home, I have modified the virtual machine's .vmx file and changed the vmxnet3 device and it works.

  Ethernet1. ConnectionType = "custom".

  Ethernet1.virtualDev = "e1000".

  Ethernet1.wakeOnPcktRcv = "FALSE".

  Ethernet1. AddressType = 'generated '.

  ethernet2. Present = 'TRUE '.

  ethernet2.VNET = "VMnet1.

  ethernet2. ConnectionType = "custom".

  ethernet2.virtualDev = "vmxnet3" - change to vmxnet3

  Adapter type VMxnet3 only is not supported for VMware workstation and also one of my hosts broke down several times with the low error message in the log file.

  2015-08 - 02T 13: 37:48.254 + 10:00 | vCPU-4 | I120: Ethernet3 MAC address: 00: 0C: d 29:a4:7: 8 c

  2015-08 - 02T 13: 37:48.261 + 10:00 | vCPU-4 | I120: VMXNET3 user: Ethernet3 pilot Info: version = 16908544 gosBits = 2 gosType = 1, gosVer = 0, gosMisc = 0

  2015-08 - 02T 13: 37:48.527 + 10:00 | vCPU-5 | I120: VMXNET3 hosted: Packet has no eop, 1 scanner, tx ring size 512, txd valid 0.

  2015-08 - 02T 13: 37:48.527 + 10:00 | vCPU-4 | I120: Ethernet3 MAC address: 00: 0C: d 29:a4:7: 8 c

  2015-08 - 02T 13: 37:48.536 + 10:00 | vCPU-4 | I120: VMXNET3 user: Ethernet3 pilot Info: version = 16908544 gosBits = 2 gosType = 1, gosVer = 0, gosMisc = 0

  2015-08 - 02T 13: 37:51.436 + 10:00 | VMX | I120: E1000: E1000 full rx ring, empty packages.

  2015-08 - 02T 13: 37:53.636 + 10:00 | MKS | I120: MKS - SWB: number of MKSWindows has changed: 1 make MKSWindow (s) total 2.

  2015-08 - 02T 13: 37:55.565 + 10:00 | VMX | I120: VMXVmdbCbVmVmxExecState: change of State Exec asked State poweredOff without reset, soft, softOptionTimeout: 20000000.

  2015-08 - 02T 13: 37:55.565 + 10:00 | VMX | I120: Stopping VCPU son...

  2015-08 - 02T 13: 37:56.567 + 10:00 | SVGA | I120: Fate of thread SVGA

  2015-08 - 02T 13: 37:56.571 + 10:00 | MKS | I120: MKS - SWB: number of MKSWindows changed: 0 record (s) MKSWindow of total 1.

  2015-08 - 02T 13: 37:56.575 + 10:00 | MKS | I120: GDI-Backend: HWinMux stopped making the composition of the window.

  2015-08 - 02T 13: 37:56.575 + 10:00 | MKS | I120: MKS - SWB: number of MKSWindows changed: 0 record (s) MKSWindow of total 0.

  2015-08 - 02T 13: 37:56.575 + 10:00 | VMX | I120: Thread MKS is stopped

  Can someone guide me how to set up a lab NSX on VMware workstation and use 1600 MTU for VXlan traffic. Any help is very appreciated.

  Hi all

  I managed to solve this problem by separating the storage traffic to a different vswitch and the traffic to a different VDS NSX.

  ~ # esxcfg - NICS - l

  Name PCI Driver link speed Duplex MAC address MTU Description

  vmnic0 e1000 up to 1000Mbps Full 00 0000:02:01.00: 0C: d 29:a4:7: Intel Corporation 1500 6th 82545EM controller Gigabit Ethernet (copper)

  vmnic1 e1000 up to 1000Mbps Full 00 0000:02:04.00: 0C: 29:a4:7 d: 78 1500 Corporation Intel 82545EM Gigabit Ethernet Controller (copper)

  vmnic2 e1000 up to 1000Mbps Full 00 0000:02:05.00: 0C: 29:a4:7 d: 82 1600 Corporation Intel 82545EM Gigabit Ethernet Controller (copper)

  vmnic3 0000: 0b: 00.00 vmxnet3 Up Full 00 10000Mbps: 0C: 29:a4:7 d: 8 c 1600 vmxnet3 Inc. VMware Virtual Ethernet Controller.

  ~ # esxcfg - vswitch - l

  Switch name Num used Ports configured Ports MTU rising ports

  1536 5 128 1500 vmnic0 vSwitch0

  Name PortGroup VLAN ID used rising Ports

  The VM network 0 0 vmnic0

  0 1 vmnic0 VMkernel

  0 1 vmnic0 network management

  DVS name Num used Ports Ports Ports configured MTU rising

  dvSwitch 1536 10 512 1600 vmnic3 - for network traffic

  DVPort use customer ID

  7 1 vmnic3

  81 1 NSX 2 controller nsx_controller_4be65643-37ca-468e-b00a-f711d6cc5447.eth0---noeud

  79 1 nsx_controller_8bb60e33-b290-4252-92b1-501aa2f83607.eth0---noeud NSX Controller 3

  110 1 vmk2 - vtep interface for the host

  119 1 Linux1.eth0 - test Linux VM

  This laboratory works fine for me now and my Adviser for laboratory at home will be not to use the same network card for storage traffic that was used for the traffic of the NSX.

  Thank you for all your help.

• subnet VMkernel iSCSI for direct-attached storage

  Hello

  I have two hosts esxi 6.0 that I connect to a shared via iSCSI storage. I followed this document technical http://www.vmware.com/files/pdf/techpaper/vmware-multipathing-configuration-software-iSCSI-port-binding.pdf#sthash.7bztDoAS.dpf to configure interfaces iSCSI on the esxi with binding ports host. No problem.

  I use HP MSA 2040 with a dual controller and I'll connect two hosts directly on the shared storage. As for the hardware, according to the documents on best practices, it is recommended to follow a vertical subneting for ports of controllers. However, I have not found no requirement for iSCSI ports in vmware, all of the examples I found configure each vmkernel port in a different subnet, as I did:

  vSwitch0

  iSCSI1 - vmk2 - 192.168.1.11 (unused vmk3)

  iSCSI2 - vmk3 - 192.168.2.11 (unused vmk2)

  So, my question is vmkernel ports are in different subnets? or could they be in the same subnet with no difference performance wise?

  Any help would be appreciated.

  Thank you!

  in your case, because you are trying to achieve Multipathing to iSCSI Software initiator, the vmkernel ports should be in the same subnet.

• Best way to disconnect the iSCSI storage

  Hello

  I have a server cluster, connected to the Equallogic iSCSI storage. I want to delete and re-create a volume storage, but in a fairly safe way.
  Ideally, I would be able to take the volume out of action for a few days, but there are avaiable to reconnect if necessary. Normally, I would do this to simply put the volume offline. It can then be seen by the hosts, but I put it online as appropriate.
  East - meaning the best, though? It does not seem to cause some problems that are to do with map software iSCSI being unable to find the device, until a new analysis/reset of the host is according to me.
  Can anyone suggest a better way to do this?

  Hello.

  The procedure is described in http://kb.vmware.com/kb/1015084

  Good luck!