ACS 5.3: Data Repository on Tapedrive

Similar Questions

• type of data repository more quick vi

  I inherited a large application LV that, in some cases runs VERY slowly. It is almost exclusively due to the transfer of data between the application and the database or between a few screws to access the data in the repository live. First time data are necessary, it is read from the data base (via ODBC) and stuck in a LV repository with an identification number associated with (i.e., it is a version stripped of a class of porridge). This repository was written to be as simple (and effective?) as possible and is essentially a reentrant vi with a shift uninitialized register which contains an array of clusters. You can create, delete, read and write data in the repository as a Variant. Some of the groups of data are quite large (> 100 controls) and may contain subgroups or tables of channels and telephone numbers (I know, I know...).

  There are about 10 different repositories running. Each folder can contain data for items up to 30. The repositories as a whole are available on 1000 times and the 200 times database for a given operation (which therefore ends up taking about 20 seconds!)

  Because I don't have the luxury of rewriting the entire application from scratch, I need ideas on how to speed things up. So: Is there a quicker way to store/retrieve data as the repository I described? Are the massive parallelism and a 8-core chip my only Savior?

  I am running LV 7.1 on XP. I have attached a JPEG of the repository.

  Thanks for any ideas

  
  

• Can I install OBIEE 11.1.1.7 under Windows and have located on Oracle on Linux data repository

  Hello

  As a point of Contact for my client, we need to install OBIEE 11.1.1.7 under Windows, but we are not allowed to install Oracle database on Windows (very strict regulation of the client) machine.

  My question is if possible install OBIEE 11.1.1.7 (server, Installation of the company) on Windows 2008 (R2 Standard 64-bit SP1) and use as a support for (UCR and everything, including data dashboards) Oracle database (11 g) installed on a Linux machine?

  Thank you very much for your answers!

  As I'm on a time pressure, I thank you very much once again for quick answers.

  Yes.

  As long that you can reach this DB OBIEE server it's OK.

  In addition, you can run the RCU to any other box as well (or the box of OBIEE).

• Error loading configuration in the repository data

  Hi all.
  I installed Oracle 11 g R2 on Windows 2008 Server.
  After that, I can't download the agent for a database.
  Any comments please.
  Thank you for your comments advense.
  Here is the Log file:
  
  .......
  ......
  ....
  .....
  March 9, 2011 14:19:46 oracle.sysman.emcp.EMReposConfig unlockMGMTAccount
  CONFIG: Discover sql user: declare repos_pwd varchar2 (30); view_user varchar2 (30); view_user_pwd varchar2 (30); view_user_acc_status varchar2 (30); begin repos_pwd: =?; SYSMAN.mgmt_view_priv.get_view_user (view_user); Select account_status from the view_user_acc_status of sys.dba_users where upper (username) = high (view_user); If view_user_acc_status like "% LOCKED" THEN immediate "change user" | view_user | 'unlock account'; END IF; IF view_user_acc_status like "% EXPIRED %" THEN sysman.mgmt_view_priv.set_view_user_creds (repos_pwd); SYSMAN.mgmt_view_priv. GET_VIEW_USER_CREDS (view_user, view_user_pwd); run immediately "edit user" | view_user | ' identified by ' | view_user_pwd | ''; END IF; end;
  March 9, 2011 14:19:46 oracle.sysman.emcp.ParamsManager getParam
  CONFIG: No value has been set for the ORACLE_HOSTNAME parameter.
  March 9, 2011 14:19:46 oracle.sysman.emcp.util.PlatformInterface executeCommand
  CONFIG: Begin execution: CMD /C D:\app\DBAdministrator\product\11.2.0\dbhome_1\sysman\admin\scripts\emca\emcaDbUtil.bat "D:\app\DBAdministrator\product\11.2.0\dbhome_1\sysman\admin\scripts;D:\app\DBAdministrator\product\11.2.0\dbhome_1\bin"; D:/app/DBAdministrator/Product/11.2.0/dbhome_1/perl/bin\perl.exe D:\app\DBAdministrator\product\11.2.0\dbhome_1\sysman\admin\scripts\emca\emcaDbUtil.pl D:\app\DBAdministrator\product\11.2.0\dbhome_1 "(DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP) (HOST = FinaOra-ground)(PORT=1521))) (CONNECT_DATA = (SERVICE_NAME = finaoradb)))" SYS SYSDBA declare repos_pwd varchar2 (30); view_user varchar2 (30); view_user_pwd varchar2 (30); view_user_acc_status varchar2 (30); begin repos_pwd: =?; SYSMAN.mgmt_view_priv.get_view_user (view_user); Select account_status from the view_user_acc_status of sys.dba_users where upper (username) = high (view_user); If view_user_acc_status like "% LOCKED" THEN immediate "change user" | view_user | 'unlock account'; END IF; IF view_user_acc_status like "% EXPIRED %" THEN sysman.mgmt_view_priv.set_view_user_creds (repos_pwd); SYSMAN.mgmt_view_priv. GET_VIEW_USER_CREDS (view_user, view_user_pwd); run immediately "edit user" | view_user | ' identified by ' | view_user_pwd | ''; END IF; end; FINAORADB 1 SYSMAN_PWD
  March 9, 2011 14:19:49 oracle.sysman.emcp.util.PlatformInterface executeCommand
  CONFIG: Output value 0
  March 9, 2011 14:19:49 oracle.sysman.emcp.util.PlatformInterface executeCommand
  CONFIG: Running CMD /C D:\app\DBAdministrator\product\11.2.0\dbhome_1\sysman\admin\scripts\emca\emcaDbUtil.bat "D:\app\DBAdministrator\product\11.2.0\dbhome_1\sysman\admin\scripts;D:\app\DBAdministrator\product\11.2.0\dbhome_1\bin"; D:/app/DBAdministrator/Product/11.2.0/dbhome_1/perl/bin\perl.exe D:\app\DBAdministrator\product\11.2.0\dbhome_1\sysman\admin\scripts\emca\emcaDbUtil.pl D:\app\DBAdministrator\product\11.2.0\dbhome_1 "(DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP) (HOST = FinaOra-ground)(PORT=1521))) (CONNECT_DATA = (SERVICE_NAME = finaoradb)))" SYS SYSDBA declare repos_pwd varchar2 (30); view_user varchar2 (30); view_user_pwd varchar2 (30); view_user_acc_status varchar2 (30); begin repos_pwd: =?; SYSMAN.mgmt_view_priv.get_view_user (view_user); Select account_status from the view_user_acc_status of sys.dba_users where upper (username) = high (view_user); If view_user_acc_status like "% LOCKED" THEN immediate "change user" | view_user | 'unlock account'; END IF; IF view_user_acc_status like "% EXPIRED %" THEN sysman.mgmt_view_priv.set_view_user_creds (repos_pwd); SYSMAN.mgmt_view_priv. GET_VIEW_USER_CREDS (view_user, view_user_pwd); run immediately "edit user" | view_user | ' identified by ' | view_user_pwd | ''; END IF; end; FINAORADB 1 SYSMAN_PWD completed successfully
  March 9, 2011 14:19:49 oracle.sysman.emcp.util.PlatformInterface executeCommand
  CONFIG: Arguments passed D:\app\DBAdministrator\product\11.2.0\dbhome_1 (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP) (HOST = FinaOra-ground)(PORT=1521))) (CONNECT_DATA = (SERVICE_NAME = finaoradb))) SYS SYSDBA declare repos_pwd varchar2 (30); view_user varchar2 (30); view_user_pwd varchar2 (30); view_user_acc_status varchar2 (30); begin repos_pwd: =?; SYSMAN.mgmt_view_priv.get_view_user (view_user); Select account_status from the view_user_acc_status of sys.dba_users where upper (username) = high (view_user); If view_user_acc_status like "% LOCKED" THEN immediate "change user" | view_user | 'unlock account'; END IF; IF view_user_acc_status like "% EXPIRED %" THEN sysman.mgmt_view_priv.set_view_user_creds (repos_pwd); SYSMAN.mgmt_view_priv. GET_VIEW_USER_CREDS (view_user, view_user_pwd); run immediately "edit user" | view_user | ' identified by ' | view_user_pwd | ''; END IF; end; FINAORADB 1 SYSMAN_PWD
  
  Connect to the database using string (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP) (HOST = FinaOra-ground)(PORT=1521))) (CONNECT_DATA = (SERVICE_NAME = finaoradb))) D:\app\DBAdministrator\product\11.2.0\dbhome_1 House with the role of 'SYS' user 'SYSDBA '.
  connected to the database.
  To run SQL declare repos_pwd varchar2 (30); view_user varchar2 (30); view_user_pwd varchar2 (30); view_user_acc_status varchar2 (30); begin repos_pwd: =?; SYSMAN.mgmt_view_priv.get_view_user (view_user); Select account_status from the view_user_acc_status of sys.dba_users where upper (username) = high (view_user); If view_user_acc_status like "% LOCKED" THEN immediate "change user" | view_user | 'unlock account'; END IF; IF view_user_acc_status like "% EXPIRED %" THEN sysman.mgmt_view_priv.set_view_user_creds (repos_pwd); SYSMAN.mgmt_view_priv. GET_VIEW_USER_CREDS (view_user, view_user_pwd); run immediately "edit user" | view_user | ' identified by ' | view_user_pwd | ''; END IF; end;
  noOfParams to bind: 1.
  run SQL.
  
  March 9, 2011 14:19:49 oracle.sysman.emcp.EMReposConfig unlockMGMTAccount
  CONFIG: Account unlocked mgmt_view
  March 9, 2011 14:19:49 oracle.sysman.emcp.EMReposConfig invoke
  CONFIG: Managed to unlock mgmt_view account
  March 9, 2011 14:19:49 oracle.sysman.emcp.ParamsManager getParam
  CONFIG: No value has been set for the ORACLE_HOSTNAME parameter.
  March 9, 2011 14:19:49 oracle.sysman.emcp.EMReposConfig uploadConfigDataToRepository
  INFO: Download of the configuration in the repository of EM data (this may take a while)...
  March 9, 2011 14:22:54 oracle.sysman.emcp.EMReposConfig uploadConfigDataToRepository
  CONFIG: Error loading configuration in the repository data
  oracle.sysman.emdrep.config.ConfigurationException: FATAL Exceptions of Configuration
  
  at oracle.sysman.emdrep.config.EMSchemaConfiguration.perform(EMSchemaConfiguration.java:232)
  at oracle.sysman.emcp.EMReposConfig.uploadConfigDataToRepository(EMReposConfig.java:699)
  at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:385)
  at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:158)
  at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:253)
  at oracle.sysman.assistants.util.em.EMConfiguration.run(EMConfiguration.java:583)
  at oracle.sysman.assistants.util.em.EMConfigStep.executeImpl(EMConfigStep.java:139)
  at oracle.sysman.assistants.util.step.BasicStep.execute(BasicStep.java:210)
  at oracle.sysman.assistants.util.step.BasicStep.callStep(BasicStep.java:251)
  at oracle.sysman.assistants.dbca.backend.PostDBConfigureStep.executeImpl(PostDBConfigureStep.java:269)
  at oracle.sysman.assistants.util.step.BasicStep.execute(BasicStep.java:210)
  at oracle.sysman.assistants.util.step.Step.execute(Step.java:140)
  to oracle.sysman.assistants.util.step.StepContext$ ModeRunner.run (StepContext.java:2667)
  at java.lang.Thread.run(Thread.java:595)
  March 9, 2011 14:22:54 oracle.sysman.emcp.EMReposConfig invoke
  NEWS: Check the log to D:\app\DBAdministrator\cfgtoollogs\emca\finaoradb\emca_repos_config_ file < date > .log for more details.
  March 9, 2011 14:22:54 oracle.sysman.emcp.EMReposConfig invoke
  SEVERE: Error download configuration in the repository data
  March 9, 2011 14:22:54 oracle.sysman.emcp.EMConfig perform
  SEVERE: Error download configuration in the repository data
  See the log file at D:\app\DBAdministrator\cfgtoollogs\dbca\finaoradb\emConfig.log for more details.
  March 9, 2011 14:22:54 oracle.sysman.emcp.EMConfig perform
  CONFIG: Stack Trace:
  oracle.sysman.emcp.exception.EMConfigException: error loading configuration in the repository data
  at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:397)
  at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:158)
  at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:253)
  at oracle.sysman.assistants.util.em.EMConfiguration.run(EMConfiguration.java:583)
  at oracle.sysman.assistants.util.em.EMConfigStep.executeImpl(EMConfigStep.java:139)
  at oracle.sysman.assistants.util.step.BasicStep.execute(BasicStep.java:210)
  at oracle.sysman.assistants.util.step.BasicStep.callStep(BasicStep.java:251)
  at oracle.sysman.assistants.dbca.backend.PostDBConfigureStep.executeImpl(PostDBConfigureStep.java:269)
  at oracle.sysman.assistants.util.step.BasicStep.execute(BasicStep.java:210)
  at oracle.sysman.assistants.util.step.Step.execute(Step.java:140)
  to oracle.sysman.assistants.util.step.StepContext$ ModeRunner.run (StepContext.java:2667)
  at java.lang.Thread.run(Thread.java:595)
  March 9, 2011 14:22:54 oracle.sysman.emcp.EMConfig restoreOuiLoc
  CONFIG: Restoration of oracle.installer.oui_loc to D:\app\DBAdministrator\product\11.2.0\dbhome_1\oui

  PL see MOS Doc 1233913.1 ("error downloading Configuration for the data repository" when you configure dbconsole) for the solution

  HTH
  Srini

• Upgrade ACS 5.1 to 5.3

  Hi all

  I need to upgrade our ACS 5.1 to 5.3 after I see this cisco Dockment this Doc is more complex

  http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_system/5.3/installation/guide/csacs_upg.html#wp1199421

  I don't understand any help please think of me answering my question

  1. we have 2 primary and secondary, with which we have to start to upgrade?

  -at the top, Doc started with

  Upgrade a deployment ACS 5.1 to 5.3

  2 - sholud I start using this method ACS upgrade deployments or sholud I use only a 5.1 to 5.3 ACS server is upgraded ?

  3 - frist I must save my server how to back up the two page server web ACS server or should I use ony command line?

  -This command

  Step 1 Save the ACS since the ACS 5.2 Server data.

  Step 2 Enter the following backup EXEC mode to perform a backup and place the backup in a repository.

  backup backup-name-name of the repository repository

  4. What is the name of a repository and how do I find

  5. also

  ACS, install patch patch - repository name.tar.gpg repository-name

  -Idon't know whatever that means

  Note

  Before upgrading a secondary server, you must cancel the registration of the primary server.

  6. what it means, what strike?

  7. I can take this update of the page Web directors of ACS

  8. If I need to upgrade our CMD ACS must install FTP server? How to install the FTP server in ACs or how to talk about this ACS server FTP

  Thank you all for the help

  AHA

  Tarik, great answer + 5

  Hello Abdullah Hashim

  You start by secondary. If he's a collector of newspaper and then move it to primary school for a while, once the upgrade has completed, bring it back to secondary, and upgrade of the main box.

  He recommended latest patch on the current version (to avoid known problems) before you upgraded to 5.3 or 5.4 GBA

  You are already using the latest patch of ACS 5.1 (IE patch 6) so you do not need to install another patch. ACS patches are cumulative, so no need to install the previous patches. The last being should have correct all defects.

  Let me know if you still have any questions.

  ~ BR
  Jatin kone

  * Does the rate of useful messages *.

• Impossible to browse Active Directory to an ACS 5.1

  Hello

  We joined our ACS 5.1 in our Active Directory 2003, the system seems properly attached on the ACS we like connectivity status: joined and if we try with the test button we get "connection succeeded", on the AD tool, we notice that you have created a computer for our ACS account.

  We wanted to created the group directory but the navigation tool is empty and no request does not give any output.

  The ACS is joined, but we are not able to browse Active Directory.

  Any suggestions that could be the problem?

  Thank you.

  It is a matter of course due to defect mentioned below.

  CSCtf39158 - failed to retrieve ad groups in a single forest with multiple trees scenarios

  You must apply the Patch 3 for this problem

  file name: 5-1-0-44-3

  Download of: CEC / Support / download http://www.cisco.com/public/sw-center/index.shtml

  Letter: Security / identity management / Cisco Secure Access Control System / Cisco Secure Access Control System 5.1 / 5.1.0.44

  ##Steps to create the repository.

  This FAC CLI mode

  Create a repository (it's basically FTP server definition)
  AAA/admin (config) # repository FTP---> (can be any name)
  AAA/admin(config-Repository) # url ftp: / /
  AAA/admin(config-Repository) # password ordinary user

  ===============================
  Steps to install the ACS 5.1 patch:
  ===============================

  Issue the command patch GBA following in EXEC mode to install the fix of the ACS:

  ACS, install patch patch - repository name.tar.gpg repository-name

  Rgds.

  JK

  The rate of useful messages-

• OLIVIER Specs - Config data and dashboards

  I'm looking for more details on what comes with pre-built content of BI of Oracle 11 g for finance, sales, warehouse and inventory.  Specifically, I would like to know what is included in the data repository and dashboards.  Where can I find detailed information?

  Thank you!

  Check the link http://www.cool-bi.com/Ref/Ref.php product guide

• Question of Exadata ORACLE_HOME

  Hello
  I would like to know if there is a best practice concerning ORACLE_HOME exadata machine.
  If we have 3 databases on the quarter molding machine.
  a database will serve as a staging database.
  The second will serve as a database
  the wire we use repository.
  
  A question:
  ============
  I would like to get your advice if I should have only a single ORACLE_HOME for all 3 the RDBMS
  or ORACLE_HOME have for each of them.
  
  Second question:
  ============
  Regarding ASM disk groups, do I need to create only one disk group named DATA for example, or for each database to its own diskgroup
  
  Best regards

  Hi Yoav,

  I should have only ORACLE_HOME for all 3 the RDBMS
  or ORACLE_HOME have for each other?

  Use an ORACLE_HOME to your dbses. Just to keep things simple.
  BTW current Exadata of deliveries by FAC have the following oracle homes.

  /U01/app/11.2.0.3/grid
  /U01/app/Oracle/product/11.2.0.3/dbhome_1

  ..

  Should I have a single disk group named DATA for example
  or to have to each its own diskgroup database?

  By default, ACS will create DATA, RECO and groups of disks just DBFS_DG you put data in DATA files and use IORM to control the use of resources
  between databases.
  Concerning
  Tycho

• Apple health blood glucose - fasting indicator

  Didn't know where to post - but healthy Apple, glucose monitoring would be useful if he offered a flag to indicate whether the test was on an empty stomach, because these partitions are most important when evaluating records. It is much more convenient to enter the phone rather than a book, and that one extra flag would be very useful for diabetics.

  Submit your Apple here:

  http://www.Apple.com/feedback

  Meanwhile, you might want to look in the app store for glucose tracking apps that synchronize with health. Health seems really more designed as a data repository and a conduit to synchronize these data to other applications and devices rather than as a stand-alone analysis tool.

• How to decrypt the backup file

  Hi all

  I need to know how to decipher the backup file (ACS 5.3) on the desktop. Below is relevant for once you import the file to restore. However, my problem is to extract the file to your desktop

  ============================================================

  GBA backup encryption

  Backup of the ACS is now encrypted using a password of dynamic encryption. The user is prompted for an encryption password when executing a backup operation. ACS encrypts only the ACS data by using a dynamic encryption key. CARS and the ACS view data is encrypted using a static key. That is why ACS invites to enter a password for encryption when you perform a backup that contains the data of the ACS. The user is prompted for a password for decryption while restoring a backup that contains the data of the ACS.

  When you run a backup in ACS, ACS uses the static to encrypt key the CARS and the ACS data and actually a file of .gpg while GBA backup data is saved inside this file as file separate .gpg .gpg using the dynamic encryption password. When you restore the full backup, ACS invites for the decryption password decrypt the backup ACS data. ACS decrypts the data from CARS and display ACS data using the static key.

  The encryption password must have:

  • a minimum of 8 characters
  • no more than 32 characters
  • letter at least one capital letter.
  • at least a tiny.

  «Special characters are allowed except "'", "$", "(" et "") "» ACS displays the password strategy if the entered password does not meet password requirements.

  ===========================================================

  for people who would ask "Why I want to do this": it's policies related audit password standards

  Hello

  I can't think about a way to recover your files, it's to restore the file to a temp ACS server can generate a backup that is not encrypted.

  I would say we can decrypt the file on your desktop if we know the method that was used to encrypt it. I think that this information is not provided anywhere in the doc of cisco.

  Kind regards

  Amjad

• 2nd Server IaaS - SSL connection refused.

  Everyone

  I installed a Distributed vCAC pile behind a load balancer.  I've successfully installed the environment but I'm having a problem with the

  2nd Server IaaS.  It's the server without Model Manager and only the Web site component.  With the 1 Server IaaS upward, I am able to

  access the portal.  When I bring the 2nd IaaS I make an SSL connection refused, thia is only happens on the 2nd IaaS.

  Has anyone seen this problem?

  Can you join the newspaper except that you get.

  There could be lots of things, most likely the second server IaaS does not approve the IaaS certificate you configured. Most likely, it happens when he tries to access the Data /Repository. service Did you follow the installation steps when you deploy the IaaS shild (point 15 - if you install components additional Web site behind a load balancer, do not generate self-signed certificates.) Import the IaaS Webservers main certificate form to ensure that you use the same certificate on all servers behind the load balancer. )

  vCloud Documentation Center Automation

• SQL error on vmo_workflowtoken 22001

  I have a workflow that extracts inventory information and fills a SQL database.  He travels 20 VMs or more and then throws the following error:

  05 2013-08-09:09:47.488 - 0400 WARN [JDBCExceptionReporter] SQL Error: 0, SQLState: 22001

  05 2013-08-09:09:47.488 - 0400 error data truncation [JDBCExceptionReporter]

  05 2013-08-09:09:47.488 - 0400 WARN [JDBCExceptionReporter] SQL Error: 8152, SQLState: 22001

  05 2013-08-09:09:47.488 - 0400 binary or error string [JDBCExceptionReporter] would be truncated.

  05 2013-08-09:09:47.488 - 0400 WARN [WorkflowRuntimeServiceImpl] unable to update the symbolic content workflow for the id '8a809d523fc5422201404e98146404b8 '.

  org.springframework.dao.DataIntegrityViolationException: could not execute the batch update JDBC; SQL [update vmo_workflowtoken set businessstate =?, currentitemstate =?, enddate =?, globalstate =?, itemdisplaynamestack =?, itemnamestack =?, itemstackfordisplay =?, runningpassword =?, runningusername =?, startdate =?, taskid =?, title =?, wfexecutionstack =? where id =?]; nested exception is org.hibernate.exception.DataException: could not execute JDBC batch update

  at org.springframework.orm.hibernate3.SessionFactoryUtils.convertHibernateAccessException(SessionFactoryUtils.java:648)

  at org.springframework.orm.jpa.vendor.HibernateJpaDialect.translateExceptionIfPossible(HibernateJpaDialect.java:104)

  at org.springframework.orm.jpa.AbstractEntityManagerFactoryBean.translateExceptionIfPossible(AbstractEntityManagerFactoryBean.java:403)

  at org.springframework.dao.support.ChainedPersistenceExceptionTranslator.translateExceptionIfPossible(ChainedPersistenceExceptionTranslator.java:58)

  at org.springframework.dao.support.DataAccessUtils.translateIfNecessary(DataAccessUtils.java:213)

  at org.springframework.dao.support.PersistenceExceptionTranslationInterceptor.invoke(PersistenceExceptionTranslationInterceptor.java:163)

  at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:172)

  at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:202)

  to $Proxy197.saveAndFlush (Unknown Source)

  at com.vmware.o11n.service.impl.WorkflowRuntimeServiceImpl.updateWorkflowTokenWithContent(WorkflowRuntimeServiceImpl.java:880)

  at sun.reflect.GeneratedMethodAccessor876.invoke (unknown Source)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

  at java.lang.reflect.Method.invoke(Method.java:597)

  at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:318)

  at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:183)

  at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:150)

  at org.springframework.transaction.interceptor.TransactionInterceptor.invoke(TransactionInterceptor.java:110)

  at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:172)

  at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:202)

  to $Proxy203.updateWorkflowTokenWithContent (Unknown Source)

  at com.vmware.o11n.service.factory.VcoFactoryFacade.updateWorkflowTokenWithContent(VcoFactoryFacade.java:1078)

  at sun.reflect.GeneratedMethodAccessor6605.invoke (unknown Source)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

  at java.lang.reflect.Method.invoke(Method.java:597)

  at com.vmware.o11n.service.security.AccessRightsInterceptor.invoke(AccessRightsInterceptor.java:92)

  at com.vmware.o11n.service.security.AccessRightsInterceptor.invoke(AccessRightsInterceptor.java:81)

  at com.vmware.o11n.service.factory.LocalVSOFactoryInvocationHandler.invokeOperation(LocalVSOFactoryInvocationHandler.java:211)

  at com.vmware.o11n.service.factory.LocalVSOFactoryInvocationHandler.doInvoke(LocalVSOFactoryInvocationHandler.java:254)

  at com.vmware.o11n.service.factory.LocalVSOFactoryInvocationHandler.invoke(LocalVSOFactoryInvocationHandler.java:140)

  to $Proxy261.updateWorkflowTokenWithContent (Unknown Source)

  at ch.dunes.model.client.VSOFactoryClient.updateWorkflowTokenWithContent(VSOFactoryClient.java:1904)

  at ch.dunes.workflow.engine.mbean.helper.WorkflowHandler.checkpointWorkflowToken(WorkflowHandler.java:853)

  at ch.dunes.workflow.engine.mbean.helper.WorkflowHandler.handleWorkflowTokenNextStep(WorkflowHandler.java:553)

  at ch.dunes.workflow.engine.mbean.helper.WorkflowHandler.executeToken(WorkflowHandler.java:461)

  at ch.dunes.workflow.engine.mbean.helper.WorkflowHandler.handleTokenExecution(WorkflowHandler.java:387)

  at $200 (WorkflowHandler.java:86) ch.dunes.workflow.engine.mbean.helper.WorkflowHandler.access

  to ch.dunes.workflow.engine.mbean.helper.WorkflowHandler$ 1.execute(WorkflowHandler.java:303)

  at ch.dunes.model.ar.AccessRightsTemplate.executeWithAccessRights(AccessRightsTemplate.java:16)

  at ch.dunes.workflow.engine.mbean.helper.WorkflowHandler.doExecute(WorkflowHandler.java:299)

  at ch.dunes.workflow.engine.mbean.helper.WorkflowHandler.run(WorkflowHandler.java:203)

  to java.util.concurrent.Executors$ RunnableAdapter.call (Executors.java:441)

  to java.util.concurrent.FutureTask$ Sync.innerRun (FutureTask.java:303)

  at java.util.concurrent.FutureTask.run(FutureTask.java:138)

  to java.util.concurrent.ThreadPoolExecutor$ Worker.runTask (ThreadPoolExecutor.java:886)

  to java.util.concurrent.ThreadPoolExecutor$ Worker.run (ThreadPoolExecutor.java:908)

  at java.lang.Thread.run(Thread.java:662)

  Caused by: org.hibernate.exception.DataException: could not execute JDBC batch update

  at org.hibernate.exception.SQLStateConverter.convert(SQLStateConverter.java:102)

  at org.hibernate.exception.JDBCExceptionHelper.convert(JDBCExceptionHelper.java:66)

  at org.hibernate.jdbc.AbstractBatcher.executeBatch(AbstractBatcher.java:275)

  at org.hibernate.engine.ActionQueue.executeActions(ActionQueue.java:268)

  at org.hibernate.engine.ActionQueue.executeActions(ActionQueue.java:185)

  at org.hibernate.event.def.AbstractFlushingEventListener.performExecutions(AbstractFlushingEventListener.java:321)

  at org.hibernate.event.def.DefaultFlushEventListener.onFlush(DefaultFlushEventListener.java:51)

  at org.hibernate.impl.SessionImpl.flush(SessionImpl.java:1216)

  at org.hibernate.ejb.AbstractEntityManagerImpl.flush(AbstractEntityManagerImpl.java:960)

  at sun.reflect.GeneratedMethodAccessor811.invoke (unknown Source)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

  at java.lang.reflect.Method.invoke(Method.java:597)

  to org.springframework.orm.jpa.SharedEntityManagerCreator$ SharedEntityManagerInvocationHandler.invoke (SharedEntityManagerCreator.java:240)

  to $Proxy89.flush (Unknown Source)

  at org.springframework.data.jpa.repository.support.SimpleJpaRepository.flush(SimpleJpaRepository.java:379)

  at org.springframework.data.jpa.repository.support.SimpleJpaRepository.saveAndFlush(SimpleJpaRepository.java:344)

  at sun.reflect.GeneratedMethodAccessor810.invoke (unknown Source)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

  at java.lang.reflect.Method.invoke(Method.java:597)

  to org.springframework.data.repository.core.support.RepositoryFactorySupport$ QueryExecutorMethodInterceptor.executeMethodOn (RepositoryFactorySupport.java:368)

  to org.springframework.data.repository.core.support.RepositoryFactorySupport$ QueryExecutorMethodInterceptor.invoke (RepositoryFactorySupport.java:349)

  at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:172)

  at org.springframework.transaction.interceptor.TransactionInterceptor.invoke(TransactionInterceptor.java:110)

  at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:172)

  at org.springframework.dao.support.PersistenceExceptionTranslationInterceptor.invoke(PersistenceExceptionTranslationInterceptor.java:155)

  ... more than 40

  Caused by: java.sql.BatchUpdateException: truncation of data

  at net.sourceforge.jtds.jdbc.JtdsStatement.executeBatch(JtdsStatement.java:947)

  at org.jboss.resource.adapter.jdbc.CachedPreparedStatement.executeBatch(CachedPreparedStatement.java:478)

  at org.jboss.resource.adapter.jdbc.WrappedStatement.executeBatch(WrappedStatement.java:519)

  at org.hibernate.jdbc.BatchingBatcher.doExecuteBatch(BatchingBatcher.java:70)

  at org.hibernate.jdbc.AbstractBatcher.executeBatch(AbstractBatcher.java:268)

  ... more than 62

  05 08-2013 09:09:47.488 - 0400 ERROR [WorkflowHandler] unexpected error during the processing of a workflow transition

  java.lang.RuntimeException: error...

  *****************************

  He is not related to a particular VM, so I don't know where is the problem.  Any ideas?

  I see that there are 2 elements scripts containing "Extract information from the virtual machine - SL" Workflow "/" ("' Get CPU / memory ' and ' Get network / IP '").

  You can try to rename to something without ' / '.

• Create an ODBC/OIC OBIEE server connection.

  Hello

  I look at if there is a way to create an ODBC connection to a remote server in OBIEE or a way to get the data repository by other means (perhaps OIC?). The OBIEE server is on a remote windows computer and I am trying to create an ODBC data source in my windows machine local with the drivers of the instant_client without success.

  Any help is greatly appreciated!

  I found that the problem was the odbc driver that I used. I had to use the one that is installed with the tool Oracle BI Admin of 32 bits (not DB client instant one).

• How to dynamically change the last part of the url inside the body HTML in e-mail send to Apex process

  Hello

  I need to change the last part of the URL sent by post in the apex dynamically. I have a requirement that a person can register itself with a new user name and other details. When the user clicks on the button register after you have entered all the required values in the page all values will be inserted into the user_details_repository table in the database. At the same time an email with a url link is sent to the user admin for the assertion. When the admin user, click on the link it is redirected to a page where all the details submitted by this particular user is displayed. The admin user can confirm or reject the new user registration. If the admin user says, all the data repository of this particular user table will be inserted in a main table named user_details and data will be deleted from the repository table. Yet once if the admin user rejects, all the data repository of this particular user table will be deleted.

  For this, I have created two pages for this and all of the features mentioned above works correctly except change the link url each time a letter is sent to the admin user when a new user register itself. To send email, I created send e-mail process. I need to change the last word/part of URLs within html body according to the username provided by the new user.

  for example, the url to another user will be like this:

  http://localhost: 8080/apex/f? p = 103:9:3849261906471:NO:USERNAME:Namrata

  http://localhost: 8080/apex/f? p = 103:9:3849261906471:NO:USERNAME:Madhura

  Help, please.

  If there is another way to achieve the same thing please answer.

  Thank you

  Nilesh

  Hi Nilesh,

  You can use a Page element as a substitution variable in the body of the HTML message.

  for example, blah blah blah & P123_MY_PAGE_ITEM. blah blah blah

  The syntax is an ampersand in front of the name of page element and a point after the name.

  brgds,

  Peter

• Enterprise Manager Newbie Q

  Hello all,.
  

  Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
  Windows 2008 R2

  Last night one of the production users received an ORA-01652: unable to extend segment temp by 128 in tablespace TEMP error.
  
  Therefore, my manager asked that I

  “Please configure our database servers to notify us via email when critical thresholds are exceeded.
  
   This is a standard config option within enterprise manager”.

  I have very little experience/exposure with EM. In fact, I found several terms that, in my view, all refer to the same thing (correct me if I'm wrong please), for example: "OEM Database Control", "OEM Grid Control" and the so-called capabilities of "The Business Service Management (BSM) of Oracle Enterprise Manager.
  
  Are these different products/tools, or the different implementations of the OEM?
  
  We are not a CAR shop. Is the term THAT GRID is also used to indicate a RAC environment?
  
  I'm looking for a few good sources of 'How to use/configure OEM' information. Any suggestion would be appreciated.
  
  I am looking to buy the following books, recommendations on these projects or others?
  
  Oracle Enterprise Manager 10g Grid Control Handbook (Oracle Press) - Gruyter Werner
  Oracle Enterprise Manager Grid Control 11g R1: Business Service Management - Ashwin Kumar Kinihira, Govinda Raj malika
  
  It seems that there is a repository of data for the OEM. Is it necessary in general? Can I configure things such that I can get notifications by e-mail when tablespace (s) exceed a certain threshold of use without the repository?
  
  I know that I've rambled on some, thank you for your patients.
  
  
  Thanks for your time,
  Bob

  I can answer some of your questions...

  "OEM Database Control" is essentially "Oracle Enterprise Manager for a single data base". "OEM Grid Control" (or the current version, "OEM Cloud Control" is essentially "Oracle Enterprise Manager for several databases", as well as the possibility for the host of the server monitor, web applications and quite a few other non-base of data.) They are similar but different products. Control of database gets usually installed with the database software itself, while the control of grid/cloud is a completely separate a stand-alone product installation. I don't know what the BSM forest made reference to.

  Control of the database uses the monitored database as its data repository (in the SYSMAN schema). Grid control also requires a repository, but you are allowed to install a separate, free of charge license database to serve as a repository for the grid control as long as you don't use for something else (other than as a catalogue of RMAN recovery). If you don't want to install a different database to serve as a control of the grid/cloud, you can use an existing database, but it is generally not recommended.

  Control of the database or grid/cloud control can operate without a repository. One of them will allow you to set up alert notifications when tablespace (s) exceed your thresholds configured, or when several other events happen (DB stops, complete file system, CPU too high, too many sessions, load what you want).

  The term 'Grid' is used in 'Oracle Grid Infrastructure', which is part of the collection package that supports the CAR. 'Grid' is just a marketing term, RAC and Grid Control are orthogonal concepts, nor requires the other but they can also be used together.

  I can't comment on the books.