Creation of the postprocess on recon RO event handler

Similar Questions

• Is it possible to pass an argument to the function triggered by an event handler?

  Hi all
  Try to migrate my way of thinking in AS2 to AS3/CS4.
  OK, I have 2 buttons on the stage. Each button almost did the same thing, so I want to create a unique function, and each button calls this function even (we'll name this function 'Navigate')... However, the function will have to end up doing something different dependent on which button was clicked.
  If, previously, in AS2, I would have added the code on the buttons themselves with methods we (release) (see the SAMPLE CODE 1)
  
  Thus, each button calls the function efficiently navigate and transmits a different image to the function tag.
  Now, I try to recreate this feature in AS3. As you know, it (release) has been abolished (still do not know why), but we must now use event handlers, so I'll try to find a way to pass a different image to the function label argument to navigate. Currently, I can achieve that by using a switch statement to test which button has been clicked and act accordingly (see the SAMPLE CODE 2).
  
  In this simplistic example, this works very well, but in the real world, I have more than 2 buttons and the function navigate would probably much more complicated...
  So I would be able to pass an argument (as in the AS2 example) to the function to navigate... maybe in the addEventListener() method? I tried, but got compile errors (see the EXAMPLE CODE 3):
  
  The issue of the $ 1 Million:
  Is it possible to pass/change dynamically an argument to a function that is triggered by an event listener? (Or is the event that triggered the function the only argument you have?)
  If this is not possible, I would like to hear how you people it would handle (other than to have a switch with 12 cases in there)?

  I found a few solutions that I'll post below for prosperity...

  You can create a dictionary indexed by the targets of future events and store information in there you want to associate with them. Then the Navigate function check that the dictionary to get its parameters:

  Code.
  Button1.addEventListener (MouseEvent.CLICK, navigate, false, 0, true);
  Button2.addEventListener (MouseEvent.CLICK, navigate, false, 0, true);

  var buttonArgs:Dictionary = new Dictionary();
  buttonArgs [Button1] = "FrameLabel1";
  buttonArgs [Button2] = "FrameLabel2";

  function Navigate(e:MouseEvent):void {}
  gotoAndStop (buttonArgs [e.target]);
  }

  This to me, is about the same amount of work than writing a long, but a bit more elegant switch statement, I guess.

  I had a little trouble understanding the following solution, because I did not quite understand important information about event listeners. The addEventListener () method requires a function as the 2nd argument passed to it.
  It didn't quite click on until someone reminded me: Navigate is a function... Navigate("FrameLabel1") is a callfunction...

  So by writing simply navigate, I'm not actually calling the function when calling the addEventListener method, I'm just providing the event with a reference the name listener. Then, when the listener is triggered, the listener will call (and pass a MouseEvent argument to) navigate the function.

  Conversely, by writing Navigate("FrameLabel1") as 2nd argument, the event listener trys to run the function navigate both the addEventListener method is instantiated. And, since then, in this example, the function navigate returned as ": Sub" a compilation error would occur because as I said, an event listener requires a function as 2nd argument data type. This would be essentially as written addEventListener (MouseEvent.Click, Sub, false, 0, true)
  However, there is a way to get around this... basically, instead of setting the function navigate as returning an empty data type, you define a function to return data type and then nest another function (which actually contains the actions you want to run) on the inside.

  Button1.addEventListener (MouseEvent.CLICK, Navigate ("FrameLabel1"), false, 0, true);
  Button2.addEventListener (MouseEvent.CLICK, Navigate ("FrameLabel2"), false, 0, true);

  function Navigate(myLabel:String):Function {}
  return function(evt:MouseEvent):void {}
  gotoAndStop (myLabel);
  }
  }

• Get the user that is executing Action in the Validation event handler

  I know you can get UserLogin actor using ContextManager.

  I would like to know if there is another for the user who executes the action (the actor) in a validation event handler.

  Ideally I'd like the usr_key of the actor.

  using the AuthenticatedSelfService api you can do. There is a methodgetProfileDetails(java.util.Set retAttrs)

• Steps to remove an event handler pre-treat in OIM 11 g 2

  Guys,
  
  I've set up an event handler to pre-process successfully in OIM11gR2.
  
  For some reason, I would like to disable/remove it.
  
  I have a BSW get called the plugin, but still this event handler.
  
  
  Please let me know how to remove it permanently.

  Run weblogicDeletemetadata.sh, unsubscribe the plugin and then run purgecache.

• initialize the PostProcess event handler

  Hello world

  We develop a PostProcess event handler that loads a choice list values and to do a calculation based on the values of research and the parameters passed.

  The Manager will have to face a lot of events, we are a little worried that the execution could get affected too (despite the asynchronous nature of the handlers).

  Is it possible to precompute for example loading of research (which is always the same) and other calculations in an initialize() method so that the Manager is not obliged to all over again for each event?

  Thanks for your help in advance!

  To use the search in initialize the first you must instantiate full LookupOperation API to initialize and create a global variable to use the value during the life cycle of the event handler

  It is not recommended "global variables should not initialize in this method.

  Initialize method will be called only once during the event handlers loading, IE every time u start the server.

  The object created in the initialize method will still be in memory. It depends on the size of your list of choices.

  If it contains huge data not recommend you store it in the initialize method. As it will eat your memory.

  __

  When closing a thread like a response please do not forget to mark the messages correct and useful to make it easier for others to find their

• Handler process events post is not kept up-to-date of the user confidently Recon

  Hi, I have this code for an event handler for post-processing, and I need for a reconciliation of trust.
  I can see all the "System.out.println" works well in the newspaper, but there is no update in the created users.
  I need to update the user manager key, so I get ManagerID and search among employees to be one with the employee number and place it in the field Manager Key.
  This code works very well as a preprocess in EventResult to create users in IOM, but no results for PostProcess in BulkEventResult of a reconciliation of trust.

  Here is the code:

  public BulkEventResult run (long arg0, long arg1, arg2 BulkOrchestration) {}

  System.out.println ("Executing method BulkEventResult");
  HashMap < String, Serializable > [] params = arg2.getBulkParameters ();
  for (int i = 0; i < params.length; i ++) {}
  < String, Serializable > HashMap orchParam = params [i];

  String managerID = getParamaterValue (orchParam, "ManagerID"); Gets the 'Manager' of the user created.

  System.out.println ("Manager ID is:" + managerID);

  If ((managerID! = null)) {}

  < User > list list = findManager (managerID); Records in a list, the key Manager "ManagerID.

  
  If (! (list.isEmpty ()) |) (liste! = null)) {

  String managerKey = list.get (0) m:System.NET.SocketAddress.ToString (); Converts the item in the list a string.

  managerKey = managerKey.substring (managerKey.indexOf ("=") + 1, managerKey.length () - 1);

  System.out.println ("key management is:" + managerKey);

  Arg2.addParameter (UserManagerConstants.AttributeName.MANAGER_KEY. GetId(), Integer.parseInt (managerKey)); Updates the user manager key.

  }

  }

  }

  System.out.println ("development of method BulkEventResult");

  return new BulkEventResult();

  }

  I'd appreciate any help. Thanks in advance!

  Be awared that will give the UserManager in another orchestration as well

  modification of the user. But in general, it will be

  User user = new User (strUsrKey);

  user.setManagerKey (strMgrKey);

  UserManager usrMgr = Platform.getService (UserManager.class);

  usrMgr.modify (user);

  12:41, community-admin Tuesday, December 9, 2014

• With regard to the creation of the event company

  Hi people,
  
  My requirement is to create a workflow using professional event. It's done and working as expected in 'development' example.
  
  Then, I need to move the workflow and implement events pending 'Production '. But'm not have sysadmin for production credentials and this is the option to create business events.
  
  Please suggest me any solution for this
  
  Thanks in advance

  You can do this via the command-line utility WFXLoad, but you will need the password system apps.

  In the environment of the source, where the event and its subscriptions are set, download the data as follows:

  -Download the definition of business events
  Java apps d oracle.apps.fnd.wf.WFXLoad:: thin US eventDef.wfx EVENTS
  example of
  Java oracle.apps.fnd.wf.WFXLoad d apps apps thin myserver.oracle.com:8068:PROD US myEvent.wfx oracle.apps.fnd.wf.myevent.created EVENTS

  -Download subscriptions to corporate events
  Java apps d oracle.apps.fnd.wf.WFXLoad:: thin US eventSubs.wfx SUBSCRIPTIONS

  In the instance target, where you don't have access to the studio of events:

  -Send an event definition company
  Applications Java oracle.apps.fnd.wf.WFXLoad u :: thin eventDef.wfx US

  -Download subscriptions to corporate events
  Applications Java oracle.apps.fnd.wf.WFXLoad u :: thin eventSubs.wfx US

  In the syntax, I used eventDef.wfx and eventSubs.wfx, but you can use any file name.

  Kind regards

  Alejandro

• Setting default usr_locale breaks the creation of the user of the Web console.

  I broke the IOM. 11.1.2.2.0 worm

  I put the default value of the user attribute usr_locale to "it_IT" of research, as it is bound (Notification.Languages).

  Now when I access identity with the Italian locale and try to create a new user, this error pops up:

  The value specified for the attribute usr_locale of Italian is not one of the predefined values. (translated from Italian)

  Creation of the user works well when you go to identity with the English locale. The problem only occurs in other languages. What do I do?

  [2015 01-21 T 22: 32:15.243 + 01:00] [wls_oim1] [WARNING] [] [oracle.adf.controller.faces.lifecycle.Utils] [tid: [ASSETS].] [ExecuteThread: '0' for the queue: "(self-adjusting) weblogic.kernel.Default"] [userId: xelsysadm] [ecid: 0053J1A00j1EWNO6yjvX6G0000on0000kt, 0:1] [APP: oracle.iam.console.identity.self-service.ear #V2.0] [IDDM: 0000KgEMEfqEWNO6yjvX6G1Kjssi0000Dj] [URI: / identity/faces/home] ADF: addition of the following JSF error message: IAM-3050056: he valore Italian specificato by attributo usr_locale not do uno dei valori predefiniti. [[

  oracle.iam.ui.platform.exception.OIMRuntimeException: IAM-3050056: he valore Italian specificato by lattributo usr_locale not do uno dei valori predefiniti.

  at oracle.iam.ui.platform.exception.OIMErrorHandler.reportServiceException(OIMErrorHandler.java:171)

  at oracle.iam.ui.platform.exception.OIMErrorHandler.reportException(OIMErrorHandler.java:65)

  at oracle.adf.model.binding.DCDataControl.reportException(DCDataControl.java:411)

  at oracle.adf.model.binding.DCBindingContainer.reportException(DCBindingContainer.java:424)

  at oracle.adf.model.binding.DCBindingContainer.reportException(DCBindingContainer.java:479)

  at oracle.adf.model.binding.DCControlBinding.reportException(DCControlBinding.java:201)

  at oracle.jbo.uicli.binding.JUCtrlActionBinding.reportException(JUCtrlActionBinding.java:2036)

  at oracle.jbo.uicli.binding.JUCtrlActionBinding.doIt(JUCtrlActionBinding.java:1680)

  at oracle.adf.model.binding.DCDataControl.invokeOperation(DCDataControl.java:2150)

  at oracle.jbo.uicli.binding.JUCtrlActionBinding.invoke(JUCtrlActionBinding.java:760)

  at oracle.adf.controller.v2.lifecycle.PageLifecycleImpl.executeEvent(PageLifecycleImpl.java:407)

  at oracle.adfinternal.view.faces.model.binding.FacesCtrlActionBinding._execute(FacesCtrlActionBinding.java:252)

  at oracle.adfinternal.view.faces.model.binding.FacesCtrlActionBinding.execute(FacesCtrlActionBinding.java:210)

  at oracle.iam.ui.platform.utils.FacesUtils.executeOperationBinding(FacesUtils.java:169)

  at oracle.iam.ui.platform.utils.FacesUtils.executeOperationBindingFromActionListener(FacesUtils.java:116)

  at oracle.iam.ui.catalog.view.backing.CartReqBean.submit(CartReqBean.java:980)

  at oracle.iam.ui.catalog.view.backing.CartReqBean.submitActionListener(CartReqBean.java:919)

  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

  at java.lang.reflect.Method.invoke(Method.java:597)

  at com.sun.el.parser.AstValue.invoke(AstValue.java:187)

  at com.sun.el.MethodExpressionImpl.invoke(MethodExpressionImpl.java:297)

  at org.apache.myfaces.trinidadinternal.taglib.util.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:53)

  at org.apache.myfaces.trinidad.component.UIXComponentBase.broadcastToMethodBinding(UIXComponentBase.java:1473)

  at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:183)

  at oracle.adf.view.rich.component.fragment.UIXRegion.broadcast(UIXRegion.java:181)

  at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:104)

  to oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$ 1.run(ContextSwitchingComponent.java:93)

  at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:371)

  at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:97)

  at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:98)

  at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.broadcastEvents(LifecycleImpl.java:1086)

  at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:434)

  at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:207)

  at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)

  to weblogic.servlet.internal.StubSecurityHelper$ ServletServiceAction.run (StubSecurityHelper.java:227)

  at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)

  at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)

  at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  at oracle.help.web.rich.OHWFilter.doFilter (unknown Source)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:205)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  at oracle.adf.view.page.editor.webapp.WebCenterComposerFilter.doFilter(WebCenterComposerFilter.java:117)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:128)

  to org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$ FilterListChain.doFilter (TrinidadFilterImpl.java:446)

  at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)

  to org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$ FilterListChain.doFilter (TrinidadFilterImpl.java:446)

  at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:271)

  at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:177)

  at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  at oracle.iam.ui.platform.servletfilter.IdentityContextFilter.doFilter(IdentityContextFilter.java:50)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  at oracle.iam.platform.servletfilter.PwdMgmtNavigationFilter.doFilter(PwdMgmtNavigationFilter.java:164)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  at oracle.bpel.services.workflow.client.worklist.util.WorkflowFilter.doFilter(WorkflowFilter.java:175)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  at oracle.bpel.services.workflow.client.worklist.util.DisableUrlSessionFilter.doFilter(DisableUrlSessionFilter.java:70)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:180)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  to oracle.security.jps.ee.http.JpsAbsFilter$ 1.run(JpsAbsFilter.java:119)

  at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:324)

  at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:460)

  at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)

  at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)

  at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:163)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.wrapRun (WebAppServletContext.java:3730)

  to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.run (WebAppServletContext.java:3696)

  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)

  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)

  at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)

  at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)

  at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)

  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)

  at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

  Yes, I tried to reproduce this in our last installation, all connected to the top (11.1.2.2.4). Works well.

  In the old version (11.1.2.2.0), the Notification.Languages search is like this:

  Italian It_IT

  In the patched version, the same search looks like this:

  It_IT IT

  I noticed that with this little warning that appears in newspapers when you access the Create User page.

  FIX:

  [2015 01-22 T 10: 09:29.474 + 01:00] [wls_oim1] [WARNING] [] [oracle.adfinternal.view.faces.model.binding.FacesCtrlListBinding] [tid: [ASSETS].] [ExecuteThread: '5' for the queue: "(self-adjusting) weblogic.kernel.Default"] [userId: xelsysadm] [ecid: 0053Jc7MaeKFCCH6yvZf6G0000Wh0000yO, 0:3] [APP: oracle.iam.console.identity.self-service.ear #V2.0] [IDDM: 0000KgGmgqTFW7H6yvYfMG1Kjx5W0000Lx] [URI: / identity/faces/home] ADFv: corresponding selected item value type COMPUTER is not found: java.lang.String in the values list.

  Former environment:

  ADFv: Could not find selected item value Italian correspondent of type: java.lang.String in the list of values.

  
  

  BTW, I read somewhere that this warning can be resolved by setting the attribute of the value in the field regional settings on the user's page to create

  #{bindings.usr_locale__c.inputValue}

  TO

  #{bindings.usr_locale__c.attributeValue}

  In any case, we decided to remove the default value for the usr_locale and slap it just in our event handler

• Help with the scripts of "event handler".

  Ok. I am new to using event handler and the Listener Script for I have not every little thing down yet.

  What I'm trying to do is set up an event handler to activate a script when I select a layer. As I have now, the active script no matter what I choose and I'm unable to limit it to only activate when I select a layer. The ScriptListener output was:

  var idslct = charIDToTypeID ("TPCV");
  var desc10 = new ActionDescriptor();
  var idnull = charIDToTypeID ("null");
  ref19 var = new ActionReference();
  var idLyr = charIDToTypeID ("Lyr");
  ref19.putName (idLyr, 'Face');
  desc10.putReference (idnull, ref19);
  var idMkVs = charIDToTypeID ("MKV");
  desc10.putBoolean (idMkVs, false);
  executeAction (idslct, desc10, DialogModes.NO);

  I used TPCV under the name of the event during the creation of the new event in the event handler. However, this same ID is used when a tool is selected. This isn't a huge problem, but for the fact that my reason for setting this up is so that when I select a layer, first I want to implement a predefined specific tool to use on it. If I can change the tools (select another tool) and have always the same layer selected in the script automatically selects the initial tool to the layer which is always selected this layer is always the active layer.

  Example: Suppose I have the following layers...

  Texture

  Heal

  Tones

  Eyes

  Lips

  Face

  These are not my normal layers, but for example when I select the layer "Cure" I would like to start with the Healing Brush tool. However, sometimes I want to use clone on this layer as well. Using the event at this time, Heal would still be the active layer when I make the choice to the clone tool so the script would then return the selected tool, Healing Brush tool.

  So, is it possible to limit the selection event ID to activate only when a layer is selected? I noticed that the line above in bold/red is the event ID of layer. I don't know how to do this in the event handler or the script.

  Thanks for any help.

  Mike

  Here ya go...

  //
  // SelectLayerHandler.jsx
  //
  
  function _selectLayerHandler(desc) {
    // do whatever when a layer is selected
    var doc = app.activeDocument;
    var layer = doc.activeLayer;
    alert("Layer " + layer.name + " selected");
  };
  
  cTID = function(s) { return app.charIDToTypeID(s); };
  sTID = function(s) { return app.stringIDToTypeID(s); };
  
  try {
    if (arguments.length >= 2) {
      var desc = arguments[0];
      var event = arguments[1];
      if (event == cTID('slct')) {
        var ref = desc.getReference(cTID('null'));
        var cls = ref.getDesiredClass();
        if (cls == cTID('Lyr ')) {
          _selectLayerHandler(desc);
        }
      }
    }
  } catch (e) {
    alert( "Error: " + e + ":" + e.line );
  }
  
  "SelectLayerHandler.jsx";
  // EOF
  

• After upgrade FF I couldn't watch the video on Youtube. Event I down load Adobe flash player as required. I can still see Adobe flash plugin in FF.

  After upgrade FF I couldn't watch the video on Youtube. Event I down load Adobe flash player as required. I can still see Adobe flash plugin in FF.

  This screenshot shows all of these plugins as being (disabled) and "grey" - click on the button Activate on the right side.

• Full backup impossible. An error occurred during the creation of the backup folder.

  Having had a HARD drive failure and have replaced I have now bought a WD 3 to WD My Book for Mac. Plug and put in place to save. However will not achieve, and gives this error message

  Full backup impossible. An error occurred during the creation of the backup folder.

  Does anyone else have this problem?

  Paul

  How the drive is formatted?

• How to stop the logic to automatically add events midi Volume/Pan

  Hello

  How can I prevent the Logic Pro X automatically add the volume/pan events whenever I cut a clip into two?

  I have a volume/pan at the beginning of each track event and sometimes I want to just insert new midi events existing in-between, so I cut the clip, the second part of move to the right and the record or paste my new events.

  The problem is that LPX is insert automatically the events of volume/pan at the beginning of the clip cut and then, when I join these clips, I have many events unwanted volume/pan

  How can I stop doing that?

  Version LPX is 10.2.1

  Thank you!

  Just figured it out myself

  "Go to Midi - project settings - file and uncheck the box 'Change of order 7/10...' under the ' send after loading project" section.

• Is there a c# example to use the event handler ExpressionEdit Custom Button control

  TestStand 4.1

  VISUAL C# 2008

  I've added the event handler for ExpressionEdit events as I would any event handler:

  exprEdit.ButtonClick += new NationalInstruments.TestStand.Interop.UI.Ax._ExpressionEditEvents_ButtonClickEventHandler (_ExpressionEditEvents_ButtonClickEvent);

  Then, I create the event handler using the syntax

  public void _ExpressionEditEvents_ButtonClickEvent(NationalInstruments.TestStand.Interop.UI.ExpressionEditButton btn)

  {

  }

  I get the following error when I compile Isaiah:

  Error 1 no overload for delegate matches '_ExpressionEditEvents_ButtonClickEvent' 'NationalInstruments.TestStand.Interop.UI.Ax._ExpressionEditEvents_ButtonClickEventHandler '.

  I guess that means that I don't have the right parameters or types in my statement of event handler, but it corresponds to the object browser.  Any ideas on what I'm missing?

  See my last edition but I think you want your handler to look like this:

  Public Sub exprEdit_ButtonClick (ByVal sender,
  NationalInstruments.TestStand.Interop.UI.Ax._ExpressionEditEvents_ButtonClickEvent
  (e)

• Control does not after the exit of the loop of event handler

  My application brings together several controls user input.  When the user presses the OK button, it exits the event handler and the treatment.  During the treatment, it is not able to read the new values of the controls.  And in fact is no longer meets the stop button.

  When executing the attached VI, you will find that you can press the button of the switch and the LED indicates the status of the switch (this is my input from the user).  Now, press the OK button.  If you press the switch button, you will see that it works only once.  In addition, the stop button unresponsive to user input.  If you do not press the button, the stop button will cause the 2nd loop exit.

  Why the 2nd loop is unresponsive to the switch?

  It is a simplified version of my application in which two loops are separate from the States of my state machine.  There are several other States as well.

  The case of the event of the "change value" event has the property set to lock the Panel before the VI when the event is raised until the case of the event is over.

  Because the left while the loop is running not but the structuer event is always active FP everything is locked.

  Uncheck this option in the "edit event".

  Tone

• How can I access the data associated with an event within the event handler function?

  Hello

  In my LabWindows code, I try to use a DLL that has been developed in .NET (c#).  I used the built-in labwindows Wizard that converts the DLL to a usable 'instrument'.  Almost everything seems to work, except that I have 1 problem.

  There is an event (defined in the DLL) that I am able to detect.  I know that the reminder of the event is called at the right time.  But the problem is that in this function, I can't access the data that is supposed to be attached to the event.  It worked fine in c#, but I don't know how to do in LabWindows.  Here's what looked like in c# event handler function:

  void AppLoaderEventCallback (CommonLib.CommandResult MyResults)

  {

  MyResults is used in the body of this function

  }

  But in LabWindows, I can't seem to access the MyResults data structure.  Here's what I do:

  public static int CVICALLBACK AppLoaderEventCallback (CommonLib_CommandResult MyResults)

  {

  I can't access MyResults here

  }

  Can you help me with this?  I'm doing something wrong?

  Thank you very much for your help.

  -Mike

  I think that your statement of callback function is perhaps not quite correct. Look using the parameter "callback function" function Panel of the generated __Create function associated with this event. This shows the declaration of the callback function - make sure that your callback function is declared in the same way.