Not able to uninstall epson sx200 printer?

Similar Questions

• Not able to scan from the printer to my computer control panel using the HP Photosmart 5510

  Hello

  I recently bought the new HP Photosmart 5510 all in one - and I am not able to scan from my printer to my computer.

  I am however able to scan by launching the scan of the computer. I talked to HP customer earlier this evening and we ran printing + scan doctor and can't find any problems.

  I am running Windows 7-64 bit and that you have installed my wireless printer using the Installation CD supplied with the printer today.

  I could not finish troubleshooting with the technician that I talked to because I had to go to work. The person that I spoke with proposed possibly the full functionality of software downloaded from the hp.com site, which I'm happy to do, but I think that it is useless, because I have the CD of installation here. (The rep that I talked to was very nice, but I prefer not to have to uninstall and reinstall if it is not necessary)

  Because as I mentioned above, everything works perfectly and I am able to scan - but not directly from the printer itself.

  When I try to scan from my printer to my computer an error message appears on the control panel of the printer indicating that: there is no scan destination options of analysis chosen / no..

  However, I can't find anywhere with my HP software where I could add / make sure that the destinations were there. (As I could on my other printers. (IE. By the solution Center)

  This printer does not appear to be a solution center that I could find and the scanner installed with the CD icon doesn't give me any options regarding changing the settings of the parser

  I wonder:

  1. the Hp Photosmart 5510 does not have the capacity to scan from the printer control panel?

  2 OR the CD installation provided with my printer only has the base drivers as the agent of tech support suggested? Which means to scan from my printer I need to download drivers for your hp Web site?

  3. or is the problem because of something else entirely?

  Thanks for your help!

  HI Dublin,

  Follow the steps below to uninstall and reinstall the printer.

  1. open Control Panel

  2. click on uninstall a program

  3 uninstall the Photosmart 6510 in the list

  4 restart your computer

  5. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  6 download the drivers and full software functionality, and then reinstall the printer.

  Version 28.8

• I can't uninstall Firefox. I tried my Add/Remove programs and have tried the intsruction given to manually run C:\Program Files\Mozilla Firefox\uninstall\helper.exe. and it won't work. Firefox is the only program that I am not able to uninstall u

  I am unable to uninstall Firefox. I have tried my add/remove programs and have tried the intsruction given to manually run C:\Program Files\Mozilla Firefox\uninstall\helper.exe. and it will not run. Firefox is the only program I am not able to uninstall using the normal methods
  

  This has happened

  Just once or twice

  today

  User Agent

  Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; SIMBAR = {357DAD02-321A-4E1D-8305-C8CE3D8CA934}; .NET CLR 1.0.3705; .NET CLR 1.1.4322;. Media Center PC 2.8; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; .NET CLR 3.0.4506.2152 .NET CLR 3.5.30729)

  I ' v tried running C:\Program Files\Mozilla Firefox\uninstall\helper.exe.
  It does not work.

• Not able to scan with my printer [Krishna]

  Hello

  I am not able to scan with my printer.

  Model No.: P3010

  Serial No.: P3015d

  If you have a HP Laserjet P3010 is a printer function and it has not any ability to scan.

• Not able to uninstall the control panel youndoo

  Hi team,

  I am not able to uninstall a file youndoo of the control panel.

  

  See https://malwaretips.com/blogs/remove-youndoo-virus/

  With regard to the error message you get see "If you encounter any problems" in paragraph 2 of the "step 1".

  During the installation of all the free antimalware utilities, pay attention during the installation process and does not install all the 'extra' features offered.

• I'm not able to add a shared printer on a Windows XP client computer.

  original title: network printers

  I'm not able to add a shared printer on a Windows XP client. One, printers

  Canon MP830 and an Okidata 320 are installed locally on a Windows 2003 Print

  Server. Both are on the same domain. I also have Windows XP, 7, Vista and Linux

  machines on the same network. They are all able to print. The only one who does

  not working is a Windows XP client. This machine has also win 7, Vista installed

  on different hard drives. they are able to print to shared printers. I have

  cammot access to a printer by using the UNC path. I can see the shared

  printers in Favorites network but I can not connect. If I use the add printer

  Wizard to add a network printer, the printer appear in the book: but

  Yet once, they will not connect the error message I get is:

  "Unable to add the printer connection. Either the typed wsa printer name

  incorrctly, or the specified printer has lost its connection to the server. »

  I checked the permissions for the priners and I am logged in as one

  administrator when I try to add the printer. I also checked the group policy and

  everything seems to be oK. I also deleted and added the printer to the

  Server, that I managed to install them as local printers on the affected XP machine

  using the \\server_name\printer_share_name port. The priner name and the

  share name are the same for each printer. They have all worked last week that

  network printers. I'm curious to know what is causing this weird behavior. Any

  help would be greatly appreciated.

  Thank you

  John

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Technet Forum. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro

  Hope that helps.

• How to down load for epson sx200 printer installation disc

  How doen load for epson sx200 printer intallation disk

  http://www.Epson.co.UK/printers-and-all-in-ones/inkjet/Epson-Stylus-SX200/drivers-support

• Installed programs will not appear in my control panel, not able to uninstall any program.

  original title: installed programs are not displayed in my control panel. What to do? Please give me an idea.

  My Control Panel does not show the program installed in my PC. I am not able to uninstall any program.

  Hi Sanjaya,

  Thanks for the reply.

  Are you able to see programs in the new user account?

  What is the exact message that you get when you try to transfer files?

  Provide us the information to help you best.

• Hello.   Recently my home PC suddenly stopped working. If I was not able to uninstall beforehand. You guys can remove it so that I can install on my new computer.   Turn Cs and adobe aftereffects. And I work for the IGT Australia.   Regards Dave Sp

  Hi.

  Recently my home PC suddenly stopped working. If I was not able to uninstall beforehand. You guys he write off so that I can re install on my new computer.

  Running Cs and adobe aftereffects. And I work for the IGT Australia.

  Concerning

  Dave Spencer

  
  

  Serial number and activation support (no-Cloud) https://forums.adobe.com/thread/2041990 to adjust the number of activations

  -only Adobe can help with serial number problems, nobody here can access the activation server

  Remove the license on a computer http://forums.adobe.com/thread/1442423?tstart=0 clouds can help

  -read http://helpx.adobe.com/x-productkb/policy-pricing/error-maxium-acitvation-exceeded.html

  -or https://helpx.adobe.com/x-productkb/policy-pricing/activate-deactivate-products.html

  PS - I like IGT games

• Not able to see adobe pdf printer - Adobe acrobat 8.0 pro

  Dear concerned,

  We have a license to Adobe Acrobat 8 Pro.

  We are not able to create any PDF to Word/Excel file. We followed under process to create a PDF file.

  • Open Adobe Acrobat 8
  • Click Create PDF file
  • Click on file
  • Selected Word file
  • While trying to convert the word or any file in PDF format, layout error "file type not supported file has been damaged." (Being of error for each Word / Excel file)
  • As suggested, after which has the file open source
  • Goto print
  • But the Adobe PDF printer is not available

  Below find pictures for your reference.

  I use Windows 8.1 Pro 64 - Bit OS.

  Please provide a solution as soon as possible.

  Let me know if you need additional information on my side.

  Hi vatsal1892 ,

  Please note that the features of the Adobe PDF printer to create PDF files is available only with Adobe Acrobat (paid version) and not with Adobe Reader (free version). To manually install the PDF printer manually, please refer to this article:- manually install printer PDF

  I would also like to inform you that Acrobat 8 Pro is not compatible with Win 8.1.

  Best regards, Christian

• I am not able to access a shared printer from another computer on my network. How to solve this?

  Recently, I replaced my NETGEAR wired router with a NETGEAR WNDR3300 Wireless Gateway.  While I am able to share internet access both wired and wireless, on my PC I have shared my printer and several directories.  My wife's PC does not show my PC in the network, but if I ping my PC against hers, it solves the IP address, but the ping times out in vain.  This network allows to work with the original router.  I show PC my wife on the network on my PC.  Since my PC can not be seen on his PC, I can't add the printer shared on his PC.  How to solve this?

  Configure the firewall on each computer to trust the local network and allow the sharing of files and printer.

  More than one firewall running is likely to cause problems.  Select McAfee or Windows Firewall and disable it.

  I suspect that McAfee needs to be configured to approve the new router network.  I don't know what version of what McAfee product, you have, but here's how to do it on the program McAfee Security Center provided by Comcast:

  1 double-click on the Red M in the system tray.
  2. click on Internet & network .
  3. click on Configure .
  4. by firewall protection is enabled , click Advanced .
  5. click on networks .
  6. If your router network does not trust , click Network, click on edit and select Trusted then in the menu.

  You can also get help in forums Community of McAfee .

• Not able to uninstall solidworks2010(32-bit) on Win 7 (64-bit)

  Hello. I just bought a new laptop with a win 7 (64-bit) and managed to install the solidworks2010(32-bit) on it. Since it is said that the 64-bit version will run faster than 32-bit, I want to just uninstall the 32-bit version and install a solidworks2011(64-bit). But I can't uninstall the old because of the compatibility: Installation Manager pops up a window saying that the (x 86) installation program cannot run on a computer based on a 64-bit system.

  If anyone can tell me how to do? THX.

  Simon

  "Everything I did was to install the 32-bit version and I did not install all 64 bit versions of solidworks on my machine, so I don't think that the first assumption you provided would be the reason for the problem."

  Who is my first assumption that you're talking about?  I suggest that you try and install the 64-bit version despite (thus ignoring) the problems you are having with the 32-bit version.

  System Restore is never convenient if the restore points are way back when.  As you say, they cancel too much other work.

  I wonder if you get the error message is due to other unknown errors that the program cannot communicate with you?  "SolidWorks X 86 (32 bit) Edition cannot be installed on a X 64 (64-bit) computer running Windows Vista or Windows 7", seems a bit off, as you have it installed already on the said machine.  I guess that's why I'm looking for other covert reasons for failure and tend to focus on one type of permissions access problem.

  Try programs and features once more but this time activate and use the built-in Administrator account which you should activate first.

  This example may or may not work for you, with your program?

  "It seems that the"Run as Administrator"command gives you administrative privileges only, and they are not enough to install Java (and OpenOffice, by association). To work around this problem, you must actually connect to an administrator. Open a command prompt with admin rights by clicking Start, type cmd in the search/run box, hit CTRL-SHIFT-ENTER. At the prompt, type:

  NET user administrator / Active: Yes

  Then disconnect from your regular account and record as an administrator, you should be able to install the program. When you are finished, open a session to your regular account and, for security reasons, disabling the account administrator for assistance:

  «net user administrator / active: No.»

  http://user.Services.OpenOffice.org/en/forum/viewtopic.php?f=15&t=11706#p55879

  Sometimes a manual uninstall is an option, this is to remove the appropriate registry entries and do the same for the folders and files anywhere where they can occur.

  Technical support
  http://www.SolidWorks.com/SW/support/customer-software-support.htm

• ITunes will not update because of a corrupted version. I am not able to uninstall the corrupted version. Someone at - it help him?

  I can't update /download new itunes on my computer as it is said that an old version is corrupted. I can't uninstall the old version, because it is corrupt. I'm now stuck and looking for a solution. Can anyone help?

  See excellent iTunes from turingtest2 for Windows troubleshooting guide at:

  Troubleshooting problems with iTunes for Windows updates

  in particular the section on the removal and reinstallation of iTunes and other software components

  It explains how to remove each component individually and what to do if a component will not uninstall.

• not able to uninstall Assistant support hp in hp pavilion g6 1301tx with windows7 64 bit os

  I have a little problem with my computer pavilion laptop g6 1301tx. I installed the new version of the hp support assistant in my lappy and it worked for a few days.

  One day, when I want to use assistant suport that it does not work and one assistant support window showing was arrested. So I tried to uninstall the software and I did it via Control Panel, he showed the uninstall is complete but the application is always present and it is not removed completely. Now I can't install hp support assistant.

  When I want to install it, again I am the guest below as crush or not?

  hp support assistant now not the list in the Control Panel then how to remove...

  Help me please...

  

  Hello

  Try the following.

  Unless you still have the installer, download the latest version of HP Support Assistant from the page on the link below - download links are to the bottom of the page - and Save the installer to your download folder.

  http://h18021.www1.HP.com/helpandsupport/HP-support-Assistant.html

  Then, if you do not have an extraction utility installed, download and install 7-Zip.  Please note that If you have a 64-bit installation, download and install the Installer x 64 64-bit .msi on the link below.

  http://www.7-zip.org/

  Then, right click on the HPSA installer you download earlier, select Extract 7 - Zip, select the files, and then click Ok.  The newly extracted folder, right-click on UninstallHPSA and select "Run as Administrator" - you may well see no progress of this attempt uninstalling, then leave the laptop at idle for a good 10 minutes before restarting it.

  Open your download folder and delete the "record HPSA extracted" so you are just left with the original installer that you downloaded.

  Now run Microsoft 'Fixit' on the link below and use it to install the new version of HPSA.

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Kind regards

  DP - K

• Error - the exception unknown software exception (0xe0434f4d) occurred in the application at location 0x75bfb727, not able to uninstall iBryte.

  Original title: remove ibryte.

  I'm trying to uninstall ibryte not much of a success. error message
  The exception unknown software exception (0xe0434f4d) occurred in the application at location 0x75bfb727

  Hi cgam,.

  ·        What browser do you use?

  ·        How you tried to uninstall iBryte toolbar?

  You can run a scan for viruses online from the link below. If it is detected as malware or virus remove it.

  http://OneCare.live.com/site/en-NZ/default.htm?mkt=en-NZ

  If you have antivirus software installed on your computer, please install the latest update of the software to make it work properly.

  If you do not have any security software installed, you can download & install Microsoft Security Essentials.

  Reference: iBryte is on Facebook 

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.