Full backup impossible. An error occurred during the creation of the backup folder.

Having had a HARD drive failure and have replaced I have now bought a WD 3 to WD My Book for Mac. Plug and put in place to save. However will not achieve, and gives this error message

Does anyone else have this problem?

Paul

How the drive is formatted?

Tags: Mac

Similar Questions

Reference Dell backup and restore - "an error occurred during the creation of the backup of the system"

I have a Dell XPS-8700 running Windows 7. I bought the Dell Backup and Recovery Premium Edition.

I was able to create a backup bootable (hot spare), and I can create a backup of data on my external hard drive. However, whenever I try to create a backup on my external hard drive system, after about three seconds in the process, he returned: "an error occurred during the creation of the backup of the system.

How can I create a backup of the system? Why I get this error?

Thanks for all the info. My situation sounds very similar to yours.

I removed using Add/REMOVE programs in the control panel DBR and he removed cleanly.

V1.7.1.2 downloaded and executed new facility.

When I ran, it was my premium license key so he had yet to register and was not removed by uninstall.

As before, Rescue Disk ran and installed the new partition (DBR_BOOT) on WD Passport.

However, backup system immediately stopped with disconnected, missing target location or full. Tried several times...

In any case, sounds like you have solved your problem, so you like OP should this brand this post/thread as answered. I will continue to post on my other thread.

Whenever I try to update my iPhone 6 for the ios10 it is said it is impossible and that an error occurred during the installation? I ' have enough free space, so I'm not real why he keeps now.

Whenever I try to update my iPhone 6 for the ios10 it is said it is impossible and that an error occurred during the installation? I ' have enough free space, so I'm not real why he keeps now.

Try to update via iTunes.

See you soon,.

GB

Impossible to install Sketchup 8 error occurred during the installation of mounting political HRESULT: 0 x 80073712.

Original title: Sketchup 8 error occurred during the installation of Assembly politics

Everyone has been able to solve a problem with Sketchup 8: error occurred during the installation of the Assembly policy... HRESULT: 0 X 80073712?

I installed it fine on my old and slow desktop PCs, but now it will not install on my laptop (Vista Business).

Hello

I suggest you follow the steps mentioned below:

Method 1:

Temporarily disable the software antivirus (and any other security software) and firewall on the computer as a test and try to install sketchup 8 and check if you are to install it. Follow the steps in the link:

http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

If disabling the antivirus software solves the problem, you may need to configure the settings of the antivirus as a result program.

Note: make sure that you enable the antivirus software, other security and firewall programs.

Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

Method 2:

If the step above do not create new user account and try to install sketchup 8. Follow the steps in the link:

http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

An error occurred during the update the firmware. -16

I tried to update the firmware, after restarting Airport Extreme. But the Airport utility shows that an error occurred during the update the firmware. -16

I had to restore the factory settings by using Utility button and physics of the airport, but it has not solved the problem.

I had to restore the factory settings by using Utility button and physics of the airport, but it has not solved the problem.

I'm not sure what is the problem...

Your airport is now not working? That is, the reset did not work.

OR

It doesn't have to be upgraded after several attempts?

The airport is connected to the network as usual? You have full internet access through the airport?

What model is the most convenient airport?

The real model number could be a help. A1xxx of the base except the newest one... Suffice to say a grand.

What is the current firmware?

If it is a very old model, they can sometimes give wrong if it has never been updated.

Installation of El Capitan problem: "an error occurred during the preparation of the installation. Try running the application again. »

I've been a fight 2 days now trying to improve my iMac 21.5 2009 end of Mavericks in El Capitan, but as the installation is about to be launched I get this message "an error occurred during the preparation of the installation. Try running the application again".

Here is a list of all the things I've tried:

Running the application again;

Move the installation to another folder application;

Control date & time and it was already correct;

Do the installation in safe mode;

Installation of the upgrade of another user I created only for that purpose;

The computer restarts and I tried install the upgrade several times;

And, to be sure that the installation application was not corrupted I made a copy of it on an external HD and tried to install it on my 2011 MacBook Air and it worked (I didn't install because I have El Capitan installed on my MacBook).

Well, I don't know what else can be done, and I'd rather not have to completely restore my iMac.

Please try installing again after taking each of these steps you have already taken it.

Step 1

Reset the PRAM from your computer.

Step 2

If possible, set the clock system as indicated here. If you can only boot into recovery mode, see below.

In the OS X Utilities screen, select get online help. Safari will launch. While in recovery, you will have no access to your bookmarks or history. Load this web page.

Triple-click anywhere in the line below to select:
```
date 0801000014
```
Copy the selected text in the Clipboard by pressing Control-C key combination.

Quit Safari. You go back to the OS X Utilities screen.

Select

Utilities ▹ Terminal

in the menu bar. It will open a Terminal window. Paste in the window by pressing the command-V key combination.

Wait for a new line ending with a dollar sign ($) below what you entered. If it does not appear, press return.

Quit the Terminal to return to the main screen.

Step 3

If your model has replaceable memory by the user and you have upgraded modules of memory, reinstall the original memory and see if there is any improvement. Make sure not to touch the Gold contacts. Clean them with a mild solvent such as rubbing alcohol. Spare memory must exactly match the technical specifications of the machine. Do not install more memory to the maximum value specified, even if a seller of RAM, or someone else, said you that it will work.

Step 4

Back up the data at least two different storage devices, if you haven't done so already. A backup is not enough to be sure. Backups are possible with Time Machine or disk utility. Preferably both.

Erase and install OS X. This operation will destroy all the data on the boot volume, if you be better be sure backups.

Error 1935.An error occurred during the installation of Assembly component {98CB24AD-52FB-DB5F-A01F-C8B3B9A1E18E}. HRESULT: 0X800736CC.

Following error message encountered when installing SSO64 bits on Windows Server 2008 R2 Standard 64-bit edition.

Error 1935.An error occurred during the installation of Assembly component {98CB24AD-52FB-DB5F-A01F-C8B3B9A1E18E}. HRESULT: 0X800736CC.
[12:40:34 of Info] List MessageBox with text: Error 1935.An error occurred during the installation of Assembly component {98CB24AD-52FB-DB5F-A01F-C8B3B9A1E18E}. HRESULT: 0X800736CC. Return code: 1

I tried to reinstall VC ++ 2005 SP1 Redistributable, but it did not work.

I tried to rename a folder for vc ++ in the winsxs folder, but without permission to do so.

Here's the Setup log:

= Recording started: 01/03/2012-12:40:11 Build type: SHIP UNICODE 5.00.7600.00 appeal process: C:\Users\SA_KPN~1\AppData\Local\EBZ28334.tmp\Setup.exe =.
MSI (c) (C0:58) [12:40:11:525]: Resetting cached policy values
MSI (c) (C0:58) [12:40:11:525]: value of strategy Machine 'Debug' is 0
MSI (c) (C0:58) [12:40:11:525]: * RunEngine:
Product: SSO x64\SSO64\SSO64.msi
Action:
Command line:
MSI (c) (C0:58) [12:40:11:525]: Client and UI is none or basic: full installation running on the server.
MSI (c) (C0:58) [12:40:11:525]: grabbed execution mutex.
MSI (c) (C0:58) [12:40:11:525]: Cloaking enabled.
MSI (c) (C0:58) [12:40:11:525]: attempt of activation of all disabled privileges before calling install on server
MSI (c) (C0:58) [12:40:11:525]: meter is incremented to disable the stop. Counter after increment: 0
MSI (s) (C AC:3) [12:40:11:525]: running the installation inside the multi-package transaction \SSO x64\SSO64\SSO64.msi
MSI (s) (C AC:3) [12:40:11:525]: grabbed execution mutex.
MSI (s) (AC:64) [12:40:11:525]: Resetting cached policy values
MSI (s) (AC:64) [12:40:11:525]: value of strategy Machine 'Debug' is 0
MSI (s) (AC:64) [12:40:11:525]: * RunEngine:
Product: SSO x64\SSO64\SSO64.msi
Action:
Command line:
MSI (s) (AC:64) [12:40:11:540]: meter is incremented to disable the stop. Counter after increment: 0
MSI (s) (AC:64) [12:40:11:540]: value of strategy Machine 'DisableUserInstalls' is 0
MSI (s) (AC:64) [12:40:11:540]: meter is incremented to disable the stop. Counter after increment: 1
MSI (s) (AC:64) [12:40:11:540]: SRSetRestorePoint is ignored for this transaction.
MSI (s) (AC:64) [12:40:11:540]: disable the stop against the decrement. If counter > = 0, will be denied the stop. Counter after decrement: 0
MSI (s) (AC:64) [12:40:11:540]: Note: 1: 1402 2: HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer 3:2
MSI (s) (AC:64) [12:40:11:571]: file will have the applied safety of OpCode.
MSI (s) (AC:64) [12:40:11:587]: disable the stop against the decrement. If counter > = 0, will be denied the stop. Counter after decrement:-1
MSI (s) (AC:64) [12:40:11:587]: STRATEGY of RESTRICTION SOFTWARE: Verifying package--> 'SSO x64\SSO64\SSO64.msi' against the software restriction policy
MSI (s) (AC:64) [12:40:11:587]: STRATEGY of RESTRICTION SOFTWARE: SSO x64\SSO64\SSO64.msi has a digital signature
MSI (s) (AC:64) [12:40:21:603]: STRATEGY of RESTRICTION SOFTWARE: SSO x64\SSO64\SSO64.msi is allowed to run at the level of authorization 'unlimited '.
MSI (s) (AC:64) [12:40:21:603]: dialogue of end not activated
MSI (s) (AC:64) [12:40:21:603]: original ==> SSO x64\SSO64\SSO64.msi packing
MSI (s) (AC:64) [12:40:21:603]: we're running out of ==> C:\Windows\Installer\1ebf5f91.msi package
MSI (s) (AC:64) [12:40:21:619]: APPCOMPAT: replacements of compatibility mode properties found.
MSI (s) (AC:64) [12:40:21:619]: APPCOMPAT: looking for entry with ProductCode '{F89B22BC-2768-4237-B300-5CFA52D9AC84}' appcompat database
MSI (s) (AC:64) [12:40:21:619]: APPCOMPAT: no matching ProductCode found in the database.
MSI (s) (AC:64) [12:40:21:619]: MSCOREE already loaded, using the loaded copy
MSI (s) (AC:64) [12:40:21:619]: value of strategy Machine 'TransformsSecure' is 1
MSI (s) (AC:64) [12:40:21:619]: value of strategy Machine 'DisablePatch' is 0
MSI (s) (AC:64) [12:40:21:619]: value of strategy Machine 'AllowLockdownPatch' is 0
MSI (s) (AC:64) [12:40:21:619]: value of strategy Machine 'DisableLUAPatching' is 0
MSI (s) (AC:64) [12:40:21:619]: value of strategy Machine 'DisableFlyWeightPatching' is 0
MSI (s) (AC:64) [12:40:21:619]: APPCOMPAT: looking for entry with ProductCode '{F89B22BC-2768-4237-B300-5CFA52D9AC84}' appcompat database
MSI (s) (AC:64) [12:40:21:619]: APPCOMPAT: no matching ProductCode found in the database.
MSI (s) (AC:64) [12:40:21:619]: transformations are not secure.
MSI (s) (AC:64) [12:40:21:619]: PROPERTY CHANGE: adding MsiLogFileLocation property. Its value is ' C:\Users\acc\AppData\Local\Setup(030112 124011) .log.
MSI (s) (AC:64) [12:40:21:619]: command line: ADDLOCAL = froot, server, SSOMMC, Admin, Pwdsync INSTALLDIR = c: Files\Enterprise Single Sign - dans\ FILESINUSEERROR = CURRENTDIRECTORY=C:\Users\acc\AppData\Local\EBZ28334.tmp CLIENTUILEVEL = 3 MSICLIENTUSESEXTERNALUI = 1 CLIENTPROCESSID = 3776
MSI (s) (AC:64) [12:40:21:619]: PROPERTY CHANGE: adding PackageCode property. Its value is '{824AA89B-CCCC-4D40-A6D3-71DF21FEE110} '.
MSI (s) (AC:64) [12:40:21:619]: Product Code passed to Engine.Initialize: "
MSI (s) (AC:64) [12:40:21:619]: the Product Code of the table of properties before transformations: "{F89B22BC-2768-4237-B300-5CFA52D9AC84}".
MSI (s) (AC:64) [12:40:21:619]: the Product Code of the table of properties after transformations: "{F89B22BC-2768-4237-B300-5CFA52D9AC84}".
MSI (s) (AC:64) [12:40:21:619]: unregistered product: first start installation
MSI (s) (AC:64) [12:40:21:619]: product {F89B22BC-2768-4237-B300-5CFA52D9AC84} is not supported.
MSI (s) (AC:64) [12:40:21:619]: MSI_LUA: invites of credentials not required, the user is an administrator
MSI (s) (AC:64) [12:40:21:619]: PROPERTY CHANGE: adding ProductState property. Its value is '-1'. '.
MSI (s) (AC:64) [12:40:21:619]: entering CMsiConfigurationManager::SetLastUsedSource.
MSI (s) (AC:64) [12:40:21:634]: value 'SearchOrder' user policy is 'nmu '.
MSI (s) (AC:64) [12:40:21:634]: adding new sources is allowed.
MSI (s) (AC:64) [12:40:21:634]: PROPERTY CHANGE: adding PackagecodeChanging property. Its value is '1 '.
MSI (s) (AC:64) [12:40:21:634]: Package name extracted from package path: 'SSO64.msi '.
MSI (s) (AC:64) [12:40:21:634]: package be registered: "SSO64.msi."
MSI (s) (AC:64) [12:40:21:634]: Note: 2 1: 2262: AdminProperties 3:-2147287038
MSI (s) (AC:64) [12:40:21:634]: Machine policy value 'DisableMsi' is 1
MSI (s) (AC:64) [12:40:21:634]: value of strategy Machine 'AlwaysInstallElevated' is 0
MSI (s) (AC:64) [12:40:21:634]: "AlwaysInstallElevated" user policy value is 0
MSI (s) (AC:64) [12:40:21:634]: product installation will be high because the user is admin, and the product is to be installed by computer.
MSI (s) (AC:64) [12:40:21:634]: the product '{F89B22BC-2768-4237-B300-5CFA52D9AC84}' is running with elevated privileges: product is affected.
MSI (s) (AC:64) [12:40:21:634]: PROPERTY CHANGE: adding ADDLOCAL property. Its value is "froot, server, Admin, SSOMMC, Pwdsync.
MSI (s) (AC:64) [12:40:21:634]: PROPERTY CHANGE: adding INSTALLDIR property. Its value is "C:\Program Files\Common Files\Enterprise Single sign-dans\ '."
MSI (s) (AC:64) [12:40:21:634]: PROPERTY CHANGE: adding CURRENTDIRECTORY property. Its value is 'C:\Users\acc\AppData\Local\EBZ28334.tmp '.
MSI (s) (AC:64) [12:40:21:634]: PROPERTY CHANGE: adding CLIENTUILEVEL property. Its value is '3'.
MSI (s) (AC:64) [12:40:21:634]: PROPERTY CHANGE: adding MSICLIENTUSESEXTERNALUI property. Its value is '1 '.
MSI (s) (AC:64) [12:40:21:634]: PROPERTY CHANGE: adding CLIENTPROCESSID property. Its value is "3776".
MSI (s) (AC:64) [12:40:21:634]: value of strategy Machine 'DisableAutomaticApplicationShutdown' is 0
MSI (s) (AC:64) [12:40:21:634]: MANAGER of REBOOT: disabled by the property MSIRESTARTMANAGERCONTROL. Windows Installer uses the built-in functionality of FilesInUse.
MSI (s) (AC:64) [12:40:21:634]: PROPERTY CHANGE: adding MsiSystemRebootPending property. Its value is '1 '.
MSI (s) (AC:64) [12:40:21:634]: TRANSFORMS property is now:
MSI (s) (AC:64) [12:40:21:634]: PROPERTY CHANGE: adding VersionDatabase property. Its value is "200".
MSI (s) (AC:64) [12:40:21:634]: SHELL32::SHGetFolderPath returned: C:\Users\acc\AppData\Roaming
MSI (s) (AC:64) [12:40:21:634]: SHELL32::SHGetFolderPath returned: C:\Users\acc\Favorites
MSI (s) (AC:64) [12:40:21:634]: SHELL32::SHGetFolderPath returned: C:\Users\acc\AppData\Roaming\Microsoft\Windows\Network shortcuts
MSI (s) (AC:64) [12:40:21:634]: SHELL32::SHGetFolderPath returned: C:\Users\acc\Documents
MSI (s) (AC:64) [12:40:21:634]: SHELL32::SHGetFolderPath returned: C:\Users\acc\AppData\Roaming\Microsoft\Windows\Printer shortcuts
MSI (s) (AC:64) [12:40:21:634]: SHELL32::SHGetFolderPath returned: C:\Users\acc\AppData\Roaming\Microsoft\Windows\Recent
MSI (s) (AC:64) [12:40:21:634]: SHELL32::SHGetFolderPath returned: C:\Users\acc\AppData\Roaming\Microsoft\Windows\SendTo
MSI (s) (AC:64) [12:40:21:634]: SHELL32::SHGetFolderPath returned: C:\Users\acc\AppData\Roaming\Microsoft\Windows\Templates
MSI (s) (AC:64) [12:40:21:634]: SHELL32::SHGetFolderPath returned: C:\ProgramData
MSI (s) (AC:64) [12:40:21:634]: SHELL32::SHGetFolderPath returned: C:\Users\acc\AppData\Local
MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\Users\acc\Pictures
MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Administrative of Directors
MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup
MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start start\program
MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu
MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\Users\Public\Desktop
MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: Menu\Programs\Administrative C:\Users\acc\AppData\Roaming\Microsoft\Windows\Start of Directors
MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\Users\acc\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Startup
MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\Users\acc\AppData\Roaming\Microsoft\Windows\Start start\program
MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: Menu C:\Users\acc\AppData\Roaming\Microsoft\Windows\Start
MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\Users\acc\Desktop
MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Templates
MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\Windows\Fonts
MSI (s) (AC:64) [12:40:21:650]: Note: 1: 2898 2: MS without Serif 3: MS without Serif 4: 0 05:16
MSI (s) (AC:64) [12:40:21:650]: MSI_LUA: the MsiRunningElevated of the parameter property to 1 because the installation is already running high.
MSI (s) (AC:64) [12:40:21:650]: PROPERTY CHANGE: adding MsiRunningElevated property. Its value is '1 '.
MSI (s) (AC:64) [12:40:21:650]: PROPERTY CHANGE: adding privileged property. Its value is '1 '.
MSI (s) (AC:64) [12:40:21:650]: Note: 1: 1402 2: HKEY_CURRENT_USER Software Microsoft MS Setup (ACME) \User Info 3:2
MSI (s) (AC:64) [12:40:21:650]: PROPERTY CHANGE: adding USERNAME property. Its value is 'KPN '.
MSI (s) (AC:64) [12:40:21:650]: Note: 1: 1402 2: HKEY_CURRENT_USER Software Microsoft MS Setup (ACME) \User Info 3:2
MSI (s) (AC:64) [12:40:21:650]: PROPERTY CHANGE: adding COMPANYNAME property. Its value is 'KPN '.
MSI (s) (AC:64) [12:40:21:650]: PROPERTY CHANGE: adding a DATABASE property. Its value is 'C:\Windows\Installer\1ebf5f91.msi '.
MSI (s) (AC:64) [12:40:21:650]: PROPERTY CHANGE: adding OriginalDatabase property. Its value is "SSO x64\SSO64\SSO64.msi.

..............................

................................

Property (S): GPTSupport = 1
Property (S): OLEAdvtSupport = 1
Property (S): ShellAdvtSupport = 1
Property (S): MsiAMD64 = 6
Property (S): Msix64 = 6
Property (S): Intel = 6
Property (S): PhysicalMemory = 3840
Property (S): VirtualMemory = 4312
Property (S): AdminUser = 1
Property (S): MsiTrueAdminUser = 1
Property (S): LogonUser = acc
Property (S): UserSID = S-1-5-21-1305377269-4159824490-449157577-297538
Property (S): UserLanguageID = 1033
Property (S): ComputerName = W1613
Property (S): SystemLanguageID = 1033
Property (S): ScreenX = 1024
Property (S): ScreenY = 768
Property (S): CaptionHeight = 19
Property (S): BorderTop = 1
Property (S): BorderSide = 1
Property (S): TextHeight = 16
Property (S): TextInternalLeading = 3
Property (S): ColorBits = 32
Property (S): TTCSupport = 1
Property (S): Time = 12:40:37
Property (S): Date = 01/03/2012
Property (S): MsiNetAssemblySupport = 2.0.50727.4927
Property (S): MsiWin32AssemblySupport = 6.1.7600.16385
Property (S): RedirectedDllSupport = 2
Property (S): MsiRunningElevated = 1
Property (S): The privilege = 1
Property (S): Name of USER = KPN
Property (S): COMPANYNAME = KPN
Property (S): basis of DATA = C:\Windows\Installer\1ebf5f91.msi
Property (S): OriginalDatabase = SSO x64\SSO64\SSO64.msi
Property (S): UILevel = 2
Property (S): MsiUISourceResOnly = 1
Property (S): Preselected = 1
Property (S): ACTION = INSTALL
Property (S): AccountAuthenticatedUsers = authenticated users
Property (S): AccountCreatorOwner = CREATOR OWNER
Property (S): AccountPowerUsers = power users
Property (S): AccountUsers = Users
Property (S): ROOTDRIVE = D:\
Property (S): CostingComplete = 1
Property (S): OutOfDiskSpace = 0
Property (S): OutOfNoRbDiskSpace = 0
Property (S): PrimaryVolumeSpaceAvailable = 0
Property (S): PrimaryVolumeSpaceRequired = 0
Property (S): PrimaryVolumeSpaceRemaining = 0
Property (S): INSTALLLEVEL = 1
Property (S): Complus_XML_Data =

Property (S): SOURCEDIR = SSO x64\SSO64\
Property (S): SourcedirProduct = {F89B22BC-2768-4237-B300-5CFA52D9AC84}
Property (S): ProductToBeRegistered = 1
MSI (s) (AC:64) [12:40:37:260]: Note: 1: 1708
MSI (s) (AC:64) [12:40:37:260]: product: Microsoft Enterprise Single Sign-On - the Installation operation failed.

MSI (s) (AC:64) [12:40:37:275]: Windows Installer installed the product. Product name: Microsoft Enterprise Single Sign-On. Product version: 6.0.0245.0. Product language: 1033. Manufacturer: Microsoft Corporation. Installation success or error status: 1603.

MSI (s) (AC:64) [12:40:37:275]: see clean files/packages, if there
MSI (s) (AC:64) [12:40:37:275]: MainEngineThread returned 1603
MSI (s) (C AC:3) [12:40:37:275]: sequence number number for this installation system restore.
= Logging stopped: 01/03/2012 12:40:37 =.
MSI (s) (C AC:3) [12:40:37:275]: strategy user 'DisableRollback' is 0
MSI (s) (C AC:3) [12:40:37:275]: policy value 'DisableRollback' Machine is 0
MSI (s) (C AC:3) [12:40:37:275]: meter is incremented to disable the stop. Counter after increment: 0
MSI (s) (C AC:3) [12:40:37:275]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3:2
MSI (s) (C AC:3) [12:40:37:275]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3:2
MSI (s) (C AC:3) [12:40:37:275]: disable the stop against the decrement. If counter > = 0, will be denied the stop. Counter after decrement:-1
MSI (s) (C AC:3) [12:40:37:275]: restoration of the environment variables
MSI (s) (C AC:3) [12:40:37:275]: object to destroy RemoteAPI.
MSI (s) (C AC:3) [12:40:37:275]: end of thread Custom Action Manager.
MSI (c) (C0:58) [12:40:37:275]: disable the stop against the decrement. If counter > = 0, will be denied the stop. Counter after decrement:-1
MSI (c) (C0:58) [12:40:37:275]: MainEngineThread returned 1603
= Recording stopped: 01/03/2012 12:40:37 =.

Hello Philippe Gupta.

Since the question you posted is on a Windows Server 2008-based computer, the question would be better suited on the TechNet support forum. Then I suggest you to post the question on the following link.

http://social.technet.Microsoft.com/forums/en-us/newThread

Error: A connection has been established with the server, but then an error occurred during the connection process.

Hello

I have MsSql running in the cluster environment and recently face the problem when there is a security agent installed in MsSql server, which the agent does nothing but only to capture the local database activity. The error led is as below:

ID from step 1

Server NIBKSQLCLUST

Job name LSBackup_DRIB

Newspaper log shipping backup job step name.

Time 00:00:02

SQL severity 0

SQL Message ID 0

Operator by e-mail

Operator Net sent

Operator paged

Retries attempted 0

Message

2011-03-21 08:00:02.62 * error: could not retrieve parameters of backup for primary ID '26f46141-a676-41b2-8653-11f1b13de43a '. (Microsoft.SqlServer.Management.LogShipping) *.

2011-03-21 08:00:02.63 * error: could not connect to the server NIBKSQLCLUST. (Microsoft.SqlServer.ConnectionInfo) *.

2011-03-21 08:00:02.63 * error: a connection has been established with the server, but then an error occurred during the connection process. (provider: Named Pipes Provider, error: 0 - no process is on the other end of the pipe.) (.Net SqlClient data provider) *.

2011-03-21 08:00:02.63 - END OF THE TRANSACTION LOG BACKUP-

The process to run correctly when I turned off the security officer. Advice kindly the cause of this problem and is where all configurations should be set / changed in MsSql server.

Thank you

Boonlep coulibaly

Hello

I suggest you to send your request from the link and check.

http://msdn.Microsoft.com/en-us/hh361695.aspx

http://msdn.Microsoft.com/en-us/library/bb545450.aspx

Microsoft Fixit error "an error occurred during the download of one or more components and cannot run the Troubleshooter"

Original title: cannot run FixIt.

With the help of Vista Home Premium, sp2, 32-bit on Toshiba Satalite A135

I tried for days to find a solution for the reason why I can't run software 'MR FIXIT' or "MICROSOFT FIXIT" auto diagnostic I downloaded several versions of the software and saved, but when I try to launch it I stopped. The following message appears: "toubleshooting cannot continue b/c an error has occurred." An error occurred during the download of one or more components and cannot run the troubleshooter. »

These versions I've tried lately:

microsoftfixit. Program.installuninstall.RNP.84258196752136210.7.1.Run

microsoftfixit. Program.installuninstall.Run

microsoftfixit. WinSecurity.fisc.8425861308153696.4.1.Run

microsoftfixit. Wu.FISC.8425861308153696.4.2.run

852581157233326805.5.1.run

I don't know if the problem is related, but I was also impossible to install the download: security for microsoft .net 1.1 SP1 framework update... (kb2656353). I tried to install this download since January of 2012. The reason why I tried to use the auto diagnostic software should fix my problem of installation of the security update. I remember somewhere along the way, getting the error message that some files were corrupt. Your help would be greatly appreciated.

Hello

Are able to run fix it?

You can also post your query in Microsoft solve this forum. Please visit the link below to find a community that will support what ask you:

http://social.Microsoft.com/forums/is/fixitcenter/threads

Error 1935. An error occurred during the installation of assembly component. HRESULT: 0 X 80070002

original title: Error 1935. An error occurred during the installation of Assembly component__ {98CB24AD-52FB-DB5F-A01F-C8B3B9A1E18E} __HRESULT: 0 x 80070002

Hi, I get this error when installing acrobat reader.

It get to 100% and then I get this message, I seems to be impossible to install photoshop as well...

I know this must be a registry error, I tried running as administrator tried to reinstall acrobat, I tried to restart.

And now im pretty much so desperate please help me!

Thank you very much

Error 1935. An error occurred during the installation of assembly component

{98CB24AD-52FB-DB5F-A01F-C8B3B9A1E18E}

HRESULT: 0 X 80070002

Hello

Step 1: If you are not able to do step 2 (manually remove and reinstall .NET Framework), then

i. browse to C:\windows\winsxs\ x64_microsoft.vc80.atl_xxxxxxxxxxxxxxxxx
II. right-click to rename it to x64_microsoft.vc80.atl_xxxxxxxxxxxxxxxxx.old
III. then follow the step in http://support.microsoft.com/kb/923100
IV. once the .net framework is re-installed.
v. run the fix for Office 2010 to uninstall all traces of Office 2010 http://support.microsoft.com/kb/290301
VI. then try to install.

Diana
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think

If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

An error occurred during the installation of Assembly component, cannot install MSXML 4.0 SP2

Original title: error downloading MSXML 4.0 SP2

I have trouble to install MSXML 4.0 SP2 Parser and SDK. An error message appeared:
An error occurred during the installation of assembly component
{303994BA-6487-47AE-AF-1D-7AF6088EEBDB}.
HRESULT: 0X800736FD.

Hello

1. What is the exact full error you get when you try to install MSXML 4.0 SP2?

2 are you able to install other applications on your computer successfully?

3. how you try to install the MSXML 4.0 SP2?

4. have you made changes on the computer before this problem?

Method 1:

You can run the fix - it from the following link.

Solve problems with programs that cannot be installed or uninstalled

http://support.Microsoft.com/mats/Program_Install_and_Uninstall

Method 2:

Step 1:

You try to install MSXML 4.0 Service Pack 2 in the clean boot state. Read the following article.

How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
NOTE: once you are done with the boot, please follow step 7 of article to reset your computer to normal startup.

Step 2:

Check out the following link.

http://www.Microsoft.com/en-US/Download/details.aspx?ID=13631

See also:

http://social.msdn.Microsoft.com/forums/en-CA/xmlandnetfx/thread/e7a63b76-63ec-47A9-86fa-7e7cdb2bc0a8

http://support.Microsoft.com/kb/973688

It will be useful.

Why do I get the message 'a network error occurred during the processing of your order'? I was able to print an album without problem about a month ago

I am trying to print a photo book, but get the message "a network error occurred during the processing of your order. Please check your network connection and try again. I had no problem with the printing of a book about a month ago.

Start in Safe Mode, Mac OS x: Safe Mode bootand try to order from there.

Don't forget to check out the book before ordering this Apple; Get an overview of a project on paper in Photos, iPhoto or Aperture to avoid problems - Apple Support. Save the PDF to be compared with the printed version when coming out.

After download, ' an error occurred during the preparation of the installation.

Ok. I'm not very good with computers, so I'm going to do my best here:

I downloaded El Capitan last night, did the installation and rebooted. The questions endless gray on the screen. Relaunched in LANDAU several times; Install still 'stuck' 31 minutes downloading - every time. Restarted in safe mode; install 'stuck' 24 minutes - every time. I did the safe mode--> reinstalling OS X, which then made me download 'additional components' and then restarted automatically. That put me right back to get 'stuck' to 24 minutes Setup.

I could then go back to my previous OS X 10.7.5 then in safe mode (I don't remember how). I have so found the OS X 10.11 El Capitan install file in my applications folder, tried running the installer again and got "an error occurred during the preparation of the installation. Try to run the installation again. "I tried several times over with no different results. I checked the date in the terminal; It is correct. So I deleted the application (ten hours later!). Re-uploaded El Capitan on the App Store on the day the next day and just tried to run the installation program and still get "an error occurred during the preparation of the installation. Try to run the installation again. »

I do not have a "clean"... installation I didn't really know what it was before all these questions. All my stuff is backed up via Time Machine on an external hard drive that...

Any advice would be so appreciated. I am at a loss at this point.

Thank you!

So, everything was OK, two days ago? On Lion OS?

Of course, there was a hiccup during the installation. you said "makes installation and restarted."

During the installation (Setup in the applications folder), it restarts after installation, it installs effectively while restarting. So I guess the installation never finished, maybe because you the restarted.

This means that your operating system 'old' is always on it, but not completely healthy because of the "accidents" caused by ElCapitan failure install.

So I propose:

Connect your Time Machine disk (when not connected), start in the RecoveryPartition Time Machine restore, choose a date before that you tried to install ElCapitan, let him finish completely, it restarts automatically (I think). Then you are back where you started.

An unexpected error occurred during the generation of the Volume License Installer

I'm building a Volume of NI Developer Suite 2016 DS1 License Installer. I created the master suite and the installer from the DVD device drivers successfully.

However, when I try to create tools Xilinx DVD separated issued with the Game Developer on I get the error "an unexpected error occurred during the generation of the Volume License Installer '.

There is no other information.

Nobody knows what is this 'unexpected error' and how to work around.

Just worked it out. The DVD contains 2 sets of tools; 14.7 & 2014.4. You must come down with each of them separately, you can't just select the top-level of the DVD folder as you do with all the other discs in the package. Would be useful if the error to a little more explicit.

why I cant player to access itv now when I could always? He returns with "an error occurred during the processing of your request."

why I cant player to access itv now when I could always? He returns with "an error occurred during the processing of your request."

Hi James,

Let us know a few details about the issue.

1. which operating system you have installed on the computer?

2. what web browser do you use to open itv player?

3. are you able to play other videos online on other sites?

If you use Internet Explorer, then you follow these methods.

Method 1:

You can run the fix for video problems in Internet Explorer.

Playing video files crashes or blocking Internet Explorer - Windows

http://support.Microsoft.com/mats/video_freezes_or_crashes/

Method 2:

You can also follow the steps in the following article and check.

The video problems when you use Internet Explorer

http://support.Microsoft.com/kb/2532294

Note: The Reset Internet Explorer Settings feature might reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings and Add-ons. We recommend that you note these sites before using Internet Explorer settings reset feature and re - activate the Add-ons.

Feel free to get back to us for other queries.

Full backup impossible. An error occurred during the creation of the backup folder.

Similar Questions

Maybe you are looking for