Creation of the VLAN between Powerconnect 5548 and F10 s4810...

Similar Questions

• What is the difference between Unicast RPF and Reverse Path Forwarding?

  I am confused between Unicast RPF and Reverse Path Forwarding function.

  What is the difference between Unicast RPF and Reverse Path Forwarding?

  Because they have all two please check the address of the source of each package before sending it to the destination too?

  Reverse Path Forwarding is used only when the network want to build a tree shared multicast communication and then we must use Unicast RPF after creation of the shared tree?

  The mechanism of the RPF is mainly used to ensure no loop of routing traffic.

  As you probably already read, it does by ensuring that his route to the source address of a packet received is accessible via the same interface that the packet is entered in the. Think of the notion of "root port" in STP. all root ports are similar to the root, sunflower follow the Sun. Therefore, it is naturally a loop prevention mechanism.

  With multicast traffic, it is quite likely to create multiple loops of routing the nature of 'destination' traffic. For this reason, using a mechanism as the RPF to ensure you are on the "road to the root" (to say) to the source originating multicast traffic. Otherwise if you're not then you either receive this traffic route in a loop, or a suboptimal path.

  uRPF works essentially the same way, except that it is done for unicast traffic instead. Now with unicast traffic your flow is from a source and directs to a single destination. Given that, as the fact that you are using a dynamic routing algorithm (which allows to select the path to a destination), you can have loops of your network for unicast traffic flow routing; of course there may be exceptions to pitfalls of configuration route redistribution.

  However RPF when it is applied to traffic unicast can add another advantage, and it's verification IP source. That's why we can use it as a security mechanism to ensure that data are from where it is supposed to come.

  On the limit of the L2, you then have mechanisms such as guard source IP to ensure that the correct host is not usurpation of their IP address.

  By analogy RPF can be used for checking at source for multicast traffic, and it is intrinsically that however, the most important role is so that it can be used to guarantee without loop routing of multicast traffic.

  I hope that helped clear things upwards and not confused you any more with all this.

• Explain the relationship between libraries, albums and photos in pictures.  Where are the images stored?

  Looking for info on the relationship between libraries, albums and photos in the Photos app.  I can create several libraries containing photos and unique albums.  Can I put the same photo in libraries and the different albums?  By making a copy it creates a link to the original or a new photo?  Where are located the photo files?  When scanning photo to my Mac Pro files are placed in a folder structure, copy these photos in an album Photos using the original file or he places a copy in a database?

  Bottomline, I'm frustrated by the method of collection, the albums, the place and date.  I want store related photos in a separate album.   Example: A library for a family, containing albums of members of their family. Maybe the photos have duplicate in different albums.

  Some of your questions are answered by Leonie contributor in this thread:

  Re: Too many libraries...

  More answers can be found by using help in Photos app, or in general to help the Viewer.

  Apple Support website has links to information in articles; a search on the web is sometimes useful

  to locate the Apple pages faster than the company's site. Others in line include:

  Photos for OS X FAQ:

  http://www.IMore.com/photos-OS-x-FAQ

  How to use the Photos for OS x:

  http://www.IMore.com/how-use-photos-OS-x-ultimate-guide

  Good luck!

• I followed the instructions to set up the home between my Mac and iPhone sharing 6, but I don't understand all the music on my iPhone

  I followed the instructions to set up the home between my Mac and iPhone sharing 6, but I don't understand all the music on my iPhone

  I have confirmed:

  (1) devices are on the same network

  (2) I am connected to my AppleID with the same account

  3) are my OS up to date (Mac 10.11.2) (9.2 iPhone)
  (3) I closed iTunes and the App has reopened

  (4) I turned my iPhone off and rebooted (and confirms the foregoing)

  On my iPhone, I see in my music library, different ' kind' listed (e.g., classic, recently added, music of the 1990s, etc.) but they are all empty.

  Im hoping to see the music I have in iTunes on my Mac and play these songs on my iPhone.

  IM thinking, music that would be shared from my computer to my phone will be on the cloud?

  (I did not all default to add my music in the cloud at the moment).

  Post edited by: abbeyinor

  Did you go into settings > music on your phone and sign in home sharing?

  See you soon,.

  GB

• What is the different between Lenovo K3 and Lenovo k5a40

  What is the different between Lenovo K3 and Lenovo k5a40

  Because my order is Lenovo K3 online, but I got Lenovo k5a40

  Note from the admin; post moved here to start a new topic, subject edited accordingly

  There is no difference. Its the same phone. No need to worry.

• What is the interaction between appellant VIs and subVIs using VI Server?

  I am student at the CLAD and one of the lines in the document preparation or here is the following:

  What is the interaction between appellant VIs and subVIs using VI Server?

  I know how to use the function "Call for reference" to call a VI, but not necessarily a Subvi. I thought a Subvi is always loaded with the calling VI and has nothing to do with the server of VI. What Miss me?

  Hi Bmihura,

  I think that this article will clear up how the VI Server works with subVIs called statically or dynamically.

  Call a VI by reference

  Best regards

• What is the difference between an application and a widget?

  I'm a newbie trying my Tablet cleaning. to start:

  What is the difference between an application and a widget?

  Widget-based applications

  not always asked of widgets

  Widget is just an application interface to develop android home and have some readily available settings/info/etc.; If you do not need to type an application to access some of the data; but you can type the widget to run the application if necessary and if possible.

  It's like a windows program, you must run it to use it... If they is not a widget.

• What is the difference between photo gallery and Webcam live live moviemaker

  What is the difference between photo gallery and Webcam live live moviemaker

  Post Windows Live questions in the appropriate forum found here:
  http://windowslivehelp.com/

• What is the difference between Foglight JavaEE and Foglight JMX monitoring?

  Hello

  I have a plan to monitor the 6.1.0.17 WebSphere Application Server (32 bit) and 7.0.0.5 (64-bit)

  But I understand not all Foglight for JavaEE and Foglight for JMX.

  Foglight for JavaEE or Foglight for JMX is able to monitor WebSphere?

  What is the difference between Foglight JavaEE and Foglight JMX monitoring?

  Thanks in advance

  Jeans

  Just to add to the excellent answers already posted.

  We have 2 agents which allows you to monitor Java:

  1. a JavaEE agent that runs inside the JAVA virtual machine and the information of both JMX and instrumentation.

  This Agent will give you JMX information like information of JVM (use of the bunch, son etc.), of the Application and server availability information and other information of JMX/PMI (connections pools, pools of ejb, servlets, jsp, JCA and more).

  Java EE & # 039agent also gives you information of the instrumentation - RFA count and response time, exceptional output and timeout information, distribution of queries (App/DB, component technology, server, application failure), object tracking, transaction flow and stransactional between servers and data sources) and ask traces (the ability to see the trees of the RFA at the method level to know where things are slow/stuck).

  2 JMX agent is running outside the JVM but can run on the same computer or on a remote computer, this agent requires access active, JMX. This agent gives you information JVM, availability server/applications, as well as some data as the application server published using JMX (pools of connections, JCA, EJB, servlets, etc.). The JMX agent also gives you the ability to see a list of the mbeans, get the data they expose (javaEE agent gets only a predefined list (same list that is used as a template for the application servers in the JMX agent)).

  Hope this helps

  Golan

• What is the difference between NET USE and MOUNT? Why do they work differently?

  What is the difference between NET USE and MOUNT?  Why do they work differently?

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that you have a query.

  I suggest you re-post your query on The TechNet Forums because we have experts working on this type of questions and for you help the better.

  Check out the link:

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  You may consult:

  https://TechNet.Microsoft.com/en-us/library/bb490717.aspx?f=255&MSPPError=-2147217396

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• What is the diff between a 32 and 64 bit, Windows version.

  Original title: is win 7 has also a 32 and 64 bit...

  1. What is the diff between a 32 and 64 bit, Windows version.

  2.i have a computer laptop 64 bit. so I install win 7 32 bit...

  3 - is the application and games from 32-bit to 64-bit media...

  1. What is the diff between a 32 and 64 bit, Windows version.
  32-bit Windows uses 32-bit programs. 64-bit Windows uses 32 and 64-bit programs.

  2.i have a computer laptop 64 bit. so I install win 7 32 bit...
  Only if you opt for a multiboot configuration.

  3 - is the application and games from 32-bit to 64-bit media...
  Yes.

• What is the difference between. MHT and. HTM?

  Original title: is anyone know about MHT files?

  What is the difference between. MHT and. HTM?

  Hi Sheryl,

  Welcome to the Windows 7 community!

  I understand that you would like to know the difference between file MHT and HTM file. I'm happy to help you.

  MHTML, short for MIME HTML, is a format to archive web page used to combine resources that are usually represented by external links (such as images, Flash animations, audio files, Java applets) as well as the HTML code in a single file. The content of an MHTML file is encoded as if it were an email message to HTML, using the MIME type multipart/related. The first part of the file is normally encoded HTML; subsequent parts are additional resources identified by their URL original and encoded in base64. This format is sometimes referred to as MHT, after the suffix .mht given to these files by default when created by Microsoft Word, Internet Explorer or Opera. MHTML is a proposed standard, distributed in an edition revised in 1999 as RFC 2557.

  HTML Web page that is used by Web browsers; contains the code markup that is stored in a plain text format; used to display and format the text and images in a Web browser.

  HTM files serve the same exact than purpose. HTML files. The extension ".htm" appeared with the use of the Web Microsoft, such as FrontPage, SharePoint Designer and Expression Web development software.

  HTM files are much less common than HTML files.

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

   

   

  Kind regards!

• BlackBerry 10 What's the difference between BB10 London and Liverpool?

  What is the difference between BlackBerry London and Liverpool BlackBerry? I have a hard time with this.

  Thank you!

  The only difference is the radio within each bands...

• What is the difference between native SDK and Cascades/qt?

  Hi all

  Can someone tell me what is the difference between native SDK and Cascades/QT?

  When I need to go to NativeSDK and when I go to waterfalls?

  These two works in BB 10 or only Tablet?

  Please delete me, I can't live without knowing this.

  Thanks in advance.

  Hi Smiley,

  Yes, you need to install the two NDKs. They coexist and separate IDEs and install files.

  See you soon

  Swann

• What is the difference between windows live and office live?

  What is the difference between windows live and office live?

  RM

  Windows live mail is a free email client.  Microsoft office Outlook is a complete recommended paid e-mail application.