If the iphone has changed just this two things, my life would be much easier

Similar Questions

• Is it possible to restore an iPhone on a previous backup?  My phone was stolen 2 weeks ago and took me off but the thief has changed a lot of my apps and things.  I just want to know whether and how to restore them from before flight

  Is it possible to restore an iPhone on a previous backup?  My phone was stolen 2 weeks ago and took me off but the thief has changed a lot of my apps and things.  I just want to know whether and how to restore them from before flight

  How the thief has changed a lot?

  You do not have a password, find my iPhone ON?

  Read here for the restoration of the backup: http://support.apple.com/en-us/HT201252

• I just had a software problem with my Mac. and had to reload everything with Apple. Only one problem. Lightroom is gone. Apple said that the address has changed. How can I get my pictures back? Can anyone help?

  Hi all

  I just had a software problem with my mac and had to reinstall everything using Apple. One problem, lost lightroom 5. Apple said that the code of the address has changed. How to recover my photos or have I lost?

  At soon Pete J

  Hi Pete,.

  You can install Lightroom via this link:

  Download Photoshop Lightroom

  However, to get the rear changes you have previously done in Lightroom, you need to get the backup of your previous Lightroom Catalog.

  Store you the backup of your Lightroom catalog before recharging your Mac OS?

  Kind regards

  Claes

• Trying to move from a menu of navigation link that is too long to two lines and can't change it. If something has changed in this regard?

  Trying to move from a menu of navigation link that is too long to two lines and can't change it. If something has changed in this regard? I'm used to be able to do this simple action.

  No, there is no change in this regard. Exactly how you try to change the links? In Design view or by BIE? Also are you referring to the default menu or a manual.

  Thank you

  Sanjit

• The icon of firefox on the desktop and the taskbar has changed, how can I change this back.

  Recently, I installed firefox on another computer and doing other things, I then noticed that the icon in the taskbar had changed and when I tried to put the shortcut on the desktop, the icon that is displayed is a file folder. I want just the icon of firefox back.

  So far I've solved the problem by going into the properties on the icon in the task bar and the icon has changed, rebooted the computer and the icon in the taskbar has changed to what I wanted but the file on the desktop does not, but now I don't want that one, so deleted. Thank you very much for the support provided. At soon BlueWren

• I don't know if I did something to cause this; If I did, I don't know how to cancel it.  The format of my screen of the library has changed.  Across the entire screen is a group of 3 photos of my last import, with that that I chose was highlighted.  I can

  I don't know if I did something to cause this; If I did, I don't know how to cancel it.  The format of my screen of the library has changed.  Across the entire screen is a group of 3 photos of my last import, with that that I chose was highlighted.  I can still see the pictures on the bottom Strip.  If I scroll up and down, I see that all is there.  But no browser, list of files, import and export buttons, etc.  How do I return my screen normal library?

  Post a screenshot of what you see.

  Type the tab key.

• Problem of color with pdf from Indesign. I have a special mix CMYK for a bcard in Indesign. When I export the pdf file that the CMYK mix has changed just started today 1.13.15 Running Yosemite 10.10.1 all help to what to look for would be greatly apprecia

  I have a special mix CMYK for a bcard in Indesign. When I export the pdf file that the CMYK mix has changed just started today 1.13.15 Running Yosemite 10.10.1 all help to what to look for would be greatly appreciated.

  You are mixing color profiles a-place, or document workspace does not match the destination to export space is incompatible.

• Notice of reactivation of Windows indicating that the hardware has changed

  Hello

  I just started my computer and it came with a notice of "windows product activation" stating that windows must be reactivated in the next three days because the hardware has changed significantly. Is this true? I've never heard of it before!

  How to activate Windows XP
  http://support.Microsoft.com/kb/307890/en-us

  See the section titled: "how to activate Windows XP by phone.
  Also, make sure that you do not confuse the letters and numbers (number 8 for the)
  Letter B, etc.).

  How to contact a Microsoft Product Activation Center:
  http://support.Microsoft.com/default.aspx/KB/950929/en=us

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Users of Windows XP - Genuine Advantage Notifications:
  http://www.Microsoft.com/downloads/en/details.aspx?displaylang=en&FamilyID=afd45b36-3d77-4259-801c-d31a9a90cdcf
  (This tool will confirm that the copy of Windows installed on your PC is genuine and authorized)

  J W Stuart: Http://www.pagestart.com

• The appearance has changed, and even the Start button is no longer a circle but the former rectangle that says start after the installation of an update.

  I recently installed an update of Windows for Vista.  The appearance has changed and even the Start button is no longer a circle but the former rectangle that says start.  How can I get the old look back with on the uninstallation of the update?  Thank you

  Original title: updates

  Hello

  It seems that the update was for graphics, as it changed the appearance

  If the update is the problem, you will need to remove it or download and reinstall the graphics driver from your computer or the manufacturer of the graphical Web site map.

  _________________________________________

  Read this information about updates:

  Microsoft gives sometimes you updates for the 3rd party hardware: graphics, network cards, etc.

  You should only get the latest drivers for them to real hardware manufacturer's website, as Microsoft normally does nor those have the most recent drivers available as Microsoft relies of the 3rd party hardware Manufactuer to provide.

  But unfortunately, the only way to know which is the update of the problem is to install them one by one, until you find the 'wrong' for your installation.

  You can do a system restore to get back until it has been installed (which is NOT the best way to remove an update) or follow this method:

  'Remove an update'

  http://Windows.Microsoft.com/en-us/Windows-Vista/remove-an-update

  When you have found the issue of update of the list of updates which is presented > then right click on the update problem > select Hide update > and it will not be available to you once again

  "How to hide or show an update of Windows Vista"

  http://www.Vistax64.com/tutorials/72491-Windows-Update.html

  "How to hide or restore the updates of Windows hidden in Windows 7 and Windows 8"

  http://www.SevenForums.com/tutorials/24376-Windows-Update-hide-restore-hidden-updates.html

  _____________________________________________

  Here's how to chanage update settings, if you think it is necessary to:

  "Understanding Windows Update and Extras in Windows Vista and Windows 7.

  http://www.bleepingcomputer.com/tutorials/Windows-Vista-updates-and-extras/

  Or the other of these two update settings will give you the chance to see what you want to install through Windows updates;

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

  But remember you normally only have problems with hardware 3rd party drivers. Other updates are to improve the Performance and security of your system

  See you soon.

• Current version of the data in the database has changed since the user initiated the update process.

  Hello

  I get this error message: when I update a table.

  • Current version of the data in the database has changed since the user initiated the update process. version of current line identifier = "4975F66067C6EE412FF51DF46B8C4916" line application version identifier = "31163419BE48C198DE88A34AD12FE4D2".

  I get this message when a process is used to run an update on the same table.

  BEGIN

  RUN IMMEDIATELY "UPDATE CONTRATS_MAINTENANCE SET EMAIL_SENDED = 0 WHERE ID =: 1' WITH THE HELP OF: P27_ID;"

  END;

  There is an automated line (DML) process process on the table on this page.

  
  

  I understand that I get this error message because I update the database EMAIL_SENDED in the same table column and tha the automated process line try to update the same table...

  On this page, I want to the column EMAIL_SENDED always has the value 0 (zero). It is a database column

  How to do?

  Thank you for your help.

  Christian

  If you try to make it through a normal form. So in this case email_sended is getting two values one of your FORM and one of your update statement.

  To resolve this problem, you can code in hard EMAIL_SENDED point the value '0' and keep only the database column.

  If the whenver update you will automatically take the value 0.

  Another solution would be to remove this column from your FORM and then update by creating a process after submit.

  BR,

  Patrick

• Current version of the data in the database has changed...

  Hi, I have an updated report which hurts...
  
  This is the SQL code for it:
  
  Select
  "ITEM_BOM_LINE_ID,"
  "ITEM_BOM_ID,"
  "ITEM_ID",.
  "ID_PROCESSUS,"
  "SEQ,"
  DECODE (ID_PROCESSUS, NULL, QUANTITY, ") AMOUNT.
  DECODE (ID_processus, NULL, UOM_CODE, ") uom_code,.
  "VOLTAGE_PROBE,"
  'POSITION ',.
  "POS."
  "DESCRIPTION".
  of ' #OWNER # '. " TOFC_ITEM_BOM_LINES ".
  where "ITEM_BOM_ID" =: P20_ITEM_BOM_ID
  
  In that select it the ID_processus or the item_id is defined. Cannot assign at the same time.
  
  The description field is what hurt. When I run the page and try to write something in the description field on a line where ID_processus is defined this error appears:
  
  Internal error in the routine mru: ORA-20001: error in MRU: line = 1, ORA-20001: ORA-20001: current version of the data in the database has changed since the user has launched the process of update. current checksum = "B54E29267EC18630B58818FF4B710D41" element = '925466414031BD2DE082A6F954889340' checksum., update of "trailers". "" TOFC_ITEM_BOM_LINES ""ITEM_BOM_LINE_ID"= value: b1, 'ITEM_BOM_ID' =: b2, 'ITEM_ID' =: b3, 'ID_processus' =: b4,"SEQ"=: b5, 'QUANTITY' =: b6, 'UOM_CODE' =: b7, 'DESCRIPTION' =: b8
  
  It works fine when I write something in the description field on a line where item_id is not null. Also all other fields work perfectly.
  
  Can someone tell me whats wrong?
  
  Thanks :)

  Hello

  After a re-read of your OP, I noticed that
  DECODE (ID_PROCESSUS, NULL, QUANTITY, ") AMOUNT.
  DECODE (ID_processus, NULL, UOM_CODE, ") uom_code,.
  in your query.
  And it breaks when ID_processus is NOT NULL (and ITEM_ID is null), isn't?
  That's because you change (sort of) the QUANTITY and the UOM_CODE when that happens. Your query retrieves different values than those contained in the database (for example "instead of the actual value). And these 'new' values are compared with the values of database and then there is a difference. Where the error.

  But now: how to solve?
  What exactly are you trying to achieve with this construction? Is there a business rule that AMOUNT and UOM_CODE must be blank if ID_processus is not null? To add a constraint validation to your table and just show the values in your table. Or to show or hide a value of the terms of use. Or use another (made) column in your query that is not bound to a database field.

  I hope this helps...

  Greetings,
  Roel
  http://roelhartman.blogspot.com/
  You can reward this response in marking it as useful or Correct ;-)

• shut computer down, restarted my time and the date has changed

  shut computer down, restarted my time and the date has changed.  My date always gose for December 31, 4001.  Goin whats?

  Hello
  Date and time incorrect after restarting is usually the result of a dead of the CMOS battery. You may need to contact the manufacturer of the computer for help on this issue.

• Resolution of the computer has changed, now every thing is so great, I can't change it back

  resolution of the computer has changed, every thing is so great, that I can't in this resolution to change.  How can I correct this return?

  Hello

  You can use the TAB key to navigate down

  and use the ENTER key to OK

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-screen-resolution

  Change the screen resolution

  ________________________________________________

  or try this

  try a restore of the system before this happened

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• "The device has changed and no output channel is present. Open Audio hardware preferences? »

  Hello

  I installed an infusion of SSD and fresh install of Windows 7 64-bit, including the installation of Adobe CC with premiere pro and other related applications. My audio works fine, I have a portable speaker connected to the back of the audio 'line in the green plug' at the back of my office, have not had any problems with her.

  However when opening Adobe PP for the first time I get the message "the device has changed and no output channel is present. You want to open the Audio hardware preferences. At the opening of the entry default preference reads "no devices available (does not). I was unable to change the value by default using the box entrance, but was able to change the default output. I changed the default output to ' speakers (device 2-high definition audio) and after that I got an error that read "sorry a serious error has occurred which caused Adobe PP stopped." We will try to save your work)".

  Is anyone able to help with this, I don't know how to set up the audio setting is all new to me. Also do not know why this has happened given my audio works fine in any other program that I use on my pc. Any help from an expert on this forum would be greatly appreciated. Cheers, Joel.

  

  My first guess is to check and possibly update the audio driver.

• Current version of the data in the database has changed since the user has launched the process of update: tabular

  Hi people

  Version of the apex is 4.2

  Oracle database: 11.2.0.2

  I have created a simple form in a table on a table with the following structure

  {code}

  Name                                                  Null?    Type

  ----------------------------------------------------- -------- --------------

  TID NOT NULL NUMBER

  TEAM_NAME VARCHAR2 (30)

  EMP_NAME VARCHAR2 (30)

  DATE OF REPORT_DATE

  CATEGORY_NAME VARCHAR2 (30)

  NUMBER OF CATEGORY_HR

  CATEGORY_COMMENT VARCHAR2 (120)

  CREATED_DT                                                     DATE

  CREATED_BY VARCHAR2 (30)

  STATUS VARCHAR2 (1)

  {code}

  In the form of default table is

  {code}

  Select

  TID,

  TID TID_DISPLAY,

  TEAM_NAME,

  EMP_NAME,

  REPORT_DATE,

  CATEGORY_NAME,

  CATEGORY_HR,

  CATEGORY_COMMENT,

  CREATED_DT,

  CREATED_BY

  of ' #OWNER # '. " TIMESHEET.

  {code}

  I wanted to add an additional line inserted in the tabular presentation, that's why I included 'UNION ALL' in the query like this

  {code}

  Union of all the

  Select

  TID, null,

  tid_display null,

  team_name null,

  emp_name null,

  report_date null,

  category_name null,

  category_hr null,

  category_comment null,

  created_dt null,

  created_by null

  of the double

  {code}

  After having done that, I can see a blank line on the form of tables, but each time I fill data in the fields and press the "SUBMIT" button, I get the below error

  Current version of the data in the database has changed since the user has launched the process of update

  Thank you

  Navneet

  Why are you insert an extra line manually in tabular from?  There is a feature to add a line.

  If you want to insert a blank line when the page loads, then create dynamic action, this is a most appropriate feature.

  If you manually insert an extra line so that you have to write the update for this procedure.

  Leave.