cRIO vibrations project: impossible to compile maps RT

Similar Questions

• OPM - impossible to compile Excel documents

  Hello
  I get the error "" Impossible to compile the "location of the <>file" document because it does not contain the macros modeling Oracle policy"every time I have compile an Excel document and Pluggable software component Oracle Policy modeling is not present in same Excel when I open the file in the Project Explorer. OPM shows the following error: "an error occurred during the opening of the"location of the <>file"document: cannot set property Installed the AddIn class. Please help me with this.
  
  Thank you
  Naveen
  
  Published by: Naveen Meyer August 20, 2012 05:39

  I found this in another link showing where to check that the Add-in Oracle Policy modeling is available.

  For Office 2003, I found the add-ins under the Tools-Add-Ins

  Take a look at the Setup Guide for Oracle 10.3.1 Policy modeling. There is a subject in the lower part which has certain measures that may be relevant to your situation. For more convenience, I copied some details:

  The following is a possible workaround that will allow you to manually activate the Oracle strategy
  Modeling of add-in for Excel:
  (1) open the Excel document outside the Oracle Policy modeling.
  (2) select Options Excel in the Office Menu (upper-left circle). Select Add-Ins, can find
  Manage: Add-ins Excel and click Go...
  (3) place a check mark in the box Oracle Policy Modeling Excel 2007 (if it is already checked, try to uncheck,
  by clicking on OK and it turns once again).
  4) click on the OK button.
  (5) try to open the workbook again in the Oracle Policy modeling.
  If the Oracle Policy Modeling AddIn for Excel does not appear in step 3, you should be able to locate
  It is in the installation of Oracle Policy modeling templates directory. The default location is:
  C:\Program Files\Oracle\Policy Modeling\templates\Oracle Policy Modeling Excel 2007.xlam

  Published by: 941611 on August 20, 2012 11:32

  Published by: 941611 on August 20, 2012 11:37

• Impossible to compile and run the project

  Hello

  Last night, my project ran and deployed to the alpha of dev without problem.

  This morning (and the only thing I've done is changed my icon and splash screen) it just sits there at 91%. When you look at the progress window there are two progress bars:

  1 says Syncing and application startup

  2 said launch myapp (blocked: user operation is pending of "" to complete).

  This eventually give up and display a dialog window:

  There is problem

  Synchronization and application startup

  Deployment failed: Info: request shipment: install and launch

  News: Native on debugging

  Information: size of the 648916759 file

  Info: installation

  Info: Treatment 648916759 bytes

  News: Progress 0%...

  News: Advance 4%...

  Info: 99% progress

  actual_id:

  actual_version:

  result: failure 812/var/tmp/cgic247239: duplicate member name ' native/MyAppName '.

  It's that last line that concerns me.

  Any ideas what is happening?  My other projects compile and deployment very well.  I tried to use the device-debug and release.  I rebooted the PC and dev alpha and even delete the running configs so that they recreated

  Thank you very much

  After more digging, I came across http://supportforums.blackberry.com/t5/Cascades-Development/App-Wont-Launch/m-p/1955639/highlight/tr...

  I also tried to create a new project, but the problem persisted. But what it show me was a warning in the bar file descripter.  The assets he suggested I had a duplicate png file.  The assets tab listed my assets folder (where the image was in fact), but it was also alongside icon.png.  So I removed that in the list and hey presto - all is well again.

• Impossible to compile files from Java or create Java project

  Hello
  I can not compile the java files and also did not see an option for creating java project using flex builder 2.
  In fact I'm trying to create a FDS project with an option to compile on the server. I use my server Weblogic 8.1 SP5.
  
  Thank you
  Dim

  Let me see if I understand the question: you want a single IDE which has
  two types of it projects: Flex projects and some Java
  projects. If your Navigator view might look like this:

  MyJavaProject
  MyClass.java
  MyFlexProject
  MyApp.mxml

  What you trying to do? If so, then my guess is, perhaps, you
  the 'stand-alone' Flex Builder version, not the version of "plugin".
  Is one of the first questions posed by Setup if you want to install
  "Flex Builder and Flex SDK", or «Flex Builder plug-in and Flex SDK» If you
  to Java projects as well as projects in Flex Builder, you must choose the
  second option. See this image:

  http://www.Morearty.com/blog/wp-content/uploads/2006/05/Installer.PNG

  Note that if you do this, then you must first install Eclipse version 3.1.2
  of http://www.eclipse.org. (The current version of the eclipse is 3.2, but)
  We are always in the previous version, 3.1.2).

  Hope that helps. -Mike

• Impossible to compile the FPGA in project

  Hello I get the following error when I am trying to compile an FPGA VI on a Compact Rio 9022, I missing something on my stand in? Everyone has seen this before and know what is happening? An internal software error occurred. Please contact National Instruments technical support on ni.com/support with the following information: 7 error error component the generator module VI: NULL Possible reasons: LabVIEW: File not found. The file may have been moved or deleted, or the path to the file would be incorrectly formatted for the operating system. For example, use- as Windows path separators: on Mac OS, and Linux. Check that the path is correct using the command prompt or file Explorer. ========================= NOR-488: The non-existent GPIB interface.

  This looks really familiar.  I know I've seen this error.  I think there is a problem if you upgrade to the latest NOR-RIO, but you don't put at level LV FPGA 8.6.0 to 8.6.1, or something like that.  Would it be, kmoyna?

• Packed error Library Project: contains the compiled code

  I have tried to understand how the packed library works for LVOOP, but facing a wall with an error and do not know how to solve.

  (i) I did a "class 1", I then put in a library called 'library'.

  

  (II) I create a library packed and put the top-level library source files

  

  (III) once compiled and registered, I create a new project and add creating newly packed library project to it. Secondly, I add one newly create class, named 'class 2 '.

  

  (IV) I put the legacy of class 2 as a child of the class 1.

  

  (v) select new VI for substitution

  

  (VI) get error 1035

  

  What I'm doing wrong or how to fix this?

  The default setting for the packaging of screws in lvlibp deletes the block diagram.

  You must not delete dynamic distribution pattern-block screw you wish to override.

  hope this helps,

  Norbert

• May not work on cRIO in project

  Hi guys,.

  I'm trying to add a cRIO to my project (or work on a project with a cRIO inside). We have just received the license for this computer in real time, but I can't add or work on the cRIO. (Pictures below).

  So far, I tried to reinstall all SP1 2014 LabVIEW installation as well as the device drivers and restart the computer. Do I need permit FPGAS as well? I believe that the original application has been developed in 2013 LV and the developer said he only used the license in real time. Thanks for any help.

  

  What you show indicates that you do not have the driver. A screenshot of your tab to the MAX software can confirm this. When you install the driver of RIO make sure that support ADE for your version of LabVIEW is selected.

• Project properties: separately compiled code?

  I'm refactoring the code in LabVIEW 8.5 to LabVIEW 2013 SP1 with the intention to create an executable file with an installer.

  I tried to create an executable of my project and when I ran it I got a bunch of error code 59: compiled code in the source file has been separated, and this version of LabVIEW does not have access to separate code that is compiled. It turns out that for many the GTA OR and Office toolkit vi the check mark is set by default to separate the compiled code.

  The question is that if I disabled the check mark in the project properties window this port over the Subvi project or must I unplugged the check mark for each vi used in the project? If I click on the button "Mark existing Items."... ", and then set it to the unmarked status (the file uses the glyph of closed folder) will that perform the action needed to include the compiled code for every vi in the project?

  Thanks for your attention crossrulz. It could have been a combination of errors originally... Another problem I had was that my project was deep in my file structure and I thought the 59 error was not related... but I got deep on a subject, I took for granted in the past.

• Deploy the cRIO/FPGA project on identical targets

  All, I apologize that this seems to be a frequently asked question, but I'm wondering if anyone has the tricks in their bag.  I'm looking to create several identical parts of a tester, and I'm looking for the most effective way to have a unique (RTexe and FPGA bitfile) code base that I can deploy on a bunch of cRIO-9035.

  My best case scenario is that I can compile for a chassis and deploy for the rest, because I won't be able to support long-term material and which would minimize the possibility of errors creeping in different compilations presents (and make it easier on anyone that upgrades the equipment later).  In addition, it is about half an hour to recompile everything for a new chassis, which is just a pain.

  What think you of all?

  Thank you
  Jeff

  Use the utility of replication and deployment (RAD).  It is a tool developed by the engineers of system OR specially for this purpose.  The underlying idea is to get a working system and then you take a picture of him.  You can then deploy this image to the rest of your controllers.

• Impossible to compile procedure

  Hello

  I can't compile & run this underside procedure.could you help please on this.

  
  < code >

  PROCEDURE update_user_email_address (p_card_id in MAP. CARD_ID % TYPE,
  p_email_address IN USERS. EMAIL_ADDRESS % TYPE,
  o_Record_count ON PLS_INTEGER,
  o_return_code ON PLS_INTEGER
  )
  IS
  v_user_id NUMBER;
  BEGIN
  plsql_log ("card_admin.update_user_email_address: * START * '");
  plsql_log ("card_admin.update_user_email_address: p_card_id = ' | ') p_card_id);
  plsql_log ("card_admin.update_user_email_address: p_email_address = ' | ') p_email_address);
  BEGIN
  SELECT USER_ID
  IN v_user_id
  CARD
  WHERE CARD_ID = p_card_id;
  / * SELECT USER_ID IN P_USER_ID OF CARD WHERE CARD_ID = p_card_id; * /
  -SELECT * MAP WHERE CARD_ID = 14834;
  -SELECT * CARD C, U USERS WHERE C.USER_ID = U.USER_ID AND C.CARD_ID = 14834;
  END;
  / * UPDATE to USERS the VALUE EMAIL_ADDRESS = p_email_address WHERE USER_ID = P_USER_ID; * /
  -SELECT * FROM USERS WHERE USER_ID = 18789;
  plsql_log ("card_admin.update_user_email_address: user_id = ' |") v_user_id);
  plsql_log ("card_admin.update_user_email_address: update EMAIL ADDRESS for user tables");
  DEVELOPMENT.security_set_context.set_context (BUSINESS_LOG_ADMIN. C_UPDATE_CYCLE, CST. C_START_BLOG);
  plsql_log ("card_admin.update_user_email_address: event ' |") SYS_CONTEXT ('Godot', 'event'));
  
  UPDATE USERS
  SET EMAIL_ADDRESS = p_email_address
  WHEN USER_ID = P_USER_ID;
  
  plsql_log ("card_admin.update_user_email_address: update EMAIL ADDRESS for user tables");
  o_Record_count: = SQL % ROWCOUNT;
  plsql_log ('card_admin.update_user_email_address :'|| o_Record_count);
  o_return_code: = CSE. C_Success;
  plsql_log ('card_admin.update_user_email_address * END * ');
  DEVELOPMENT.security_set_context.set_context (0, CST. C_END_BLOG);
  
  EXCEPTION
  WHILE OTHERS
  THEN
  Common.exception_log ('GODOT.) CARD_ADMIN.update_user_email_address',.
  SQLCODE,
  SQLERRM,
  NULL,
  FAKE
  );
  o_return_code: =-1 * ABS (SQLCODE);
  DEVELOPMENT.security_set_context.set_context (0, CST. C_END_BLOG);
  END update_email_address;

  < code >

  I don't see a "CREATE or REPLACE" before your procedure.

  BTW: your exception handling is completely false.

• Impossible to compile the Java Code using the Oracle API

  Hi all
  
  I use the following code for use in Oracle 11 g. What pots of IOM should I include to get this to compile? I seem to have all the necessary jars, except the one that contains Thor.API.Operations... If someone could point me in the right direction for this, I would be very grateful.
  
  package AdTest;
  
  Thor.API import. *;
  Import Java.util;
  
  public class {AdTest
  
  public void AddProcessChildData (long pKey) {}
  try {}
  tcFormInstanceOperationsIntf f = getUtility ("Thor.API.Operations.tcFormInstanceOperationsIntf") (tcFormInstanceOperationsIntf);
  tcResultSet childFormDef = (f.getProcessFormDefinitionKey (pKey), f.getProcessFormVersion (pKey)) f.getChildFormDefinition;
  
  childKey long = childFormDef.getLongValue ("Structure Utility.Child Tables.Child Key"); If there is only 1 child for the form table parent on the other you have to iterate over the result set
  
  Map attrChildData = new HashMap();
  String NUGroupe = "someValue";
  
  attrChildData.put ("UD_ADUSRC_GROUPNAME", NUGroupe);
  
  f.addProcessFormChildData (childKey, pKey, attrChildData);
  } catch (Exception e) {}
  e.printStackTrace ();
  }
  }
  }

  xlAPI.jar

• Impossible to compile webhelp (RH8)

  I recently upgraded to RoboHelp 8 and have problems compiling a webhelp project. When you generate a webhelp output, RH8 crashes always 'updating of the files' (RoboHelp 8 has encountered a problem and needs to close). It seems to happen at the same place every time. I created a test project and the webhelp output worked well. I also tried a different output in the problem project (i.e. WebHelp Pro) and the fine compiled project.

  I was able to compile the project problem 5 times out of 10 until yesterday. Now, the project is constantly crashing while compiling. I tried deleting and reinstalling RoboHelp, delete and recreate my WebHelp SSL, nothing helps. Any suggestions?

  When you say you deleted the SSL, do you mean the file or the page layout in the project manager? Try as the first step.

  I guess that will fail, but it is worth. Then make a copy of the zip of the project put it somewhere safe, you can not accidentally open and that the backup as well of the wreck.

  Unless the natural log of output gives you a clue as to the rogue section, remove half of the subjects and ignore the reports of broken links. Compile it again, if it fails to stil, delete another pile until you can compile. Obviously, the rogue is in the latest batch deleted.

  You can still extract the backup copies, but do not remove it!

  See www.grainge.org for creating tips and RoboHelp

  @petergrainge

• Impossible to compile CHM - Message says to close all the Windows HTML help

  TCS 1.3 running with the latest patches.

  Single source project - out using HTML (.chm).

  When I try to compile, I get the following message is displayed:

  "Cannot create compiled file. It can be opened in another window. Please close all Windows HTML Help and try again. »

  I don't have any HTML Help windows open. Closing of HR and restart do not solve the problem. I have to shut down the computer, which is a serious concern, before I can compile again. I do not work in a network directory, which may be the cause, but I would like to know if there is a process that I can kill for Windows Task Manager that would allow me to compile without having to restart my computer. I don't see any process that identifies itself as something that I can kill for this problem.

  Anyone?

  Hello

  This message normally you launched the. CHM file you are trying to create. The first step in the process is to destroy the existing. CHM in preparation for the construction of a new. Just as you must destroy a House on a lot where you want to create a new.

  If your. CHM is on a network drive, another user may be subject to open. (yet another good reason to work locally)

  If your. CHM is on your local drive, RoboHelp believes that you have opened. If you press Alt + Tab, you see a blue arrow pointing upwards. Which indicates the CHM file running.

  

  See you soon... Rick

  Useful and practical links Wish to RoboHelp form/Bug report form Begin to learn RoboHelp HTML 7 or 8 days - $24.95! Adobe Certified RoboHelp HTML Training SorcerStone blog RoboHelp EBooks

• Impossible to compile hlp

  I just tried to compile my project (using RH 4 x)... and I make a list of the errors:
  HC3096: WARNING: topic help.rtf vmmi_online #1:
  
  The name of the font "Warnock Pro Light caption Baltic" is longer than 31 characters.
  
  HC3096: WARNING: topic help.rtf vmmi_online #1:
  
  The name of the font "Warnock Pro Light Display Baltic" is longer than 31 characters.
  
  HC3096: WARNING: topic help.rtf vmmi_online #1:
  
  The name of the font "Warnock Pro Light subtitle Baltic" is longer than 31 characters.
  
  HC3096: WARNING: topic help.rtf vmmi_online #1:
  
  The Greek police 'Caflisch Script Pro regular' name is longer than 31 characters.
  
  HC3096: WARNING: topic help.rtf vmmi_online #1:
  
  The name of the font "Caflisch Script Pro regular Baltic" plu account of 31 characters.
  
  HC3096: WARNING: topic help.rtf vmmi_online #1:
  
  The name of the "Microsoft Sans Serif (Vietnamese)" police account longer than 31 characters.
  
  HC3096: WARNING: topic help.rtf vmmi_online #1:
  
  The name of the police "Franklin Gothic Cond Baltic half" account longer than 31 characters.
  
  HC3096: WARNING: topic help.rtf vmmi_online #1:
  
  The Greek police "Franklin Gothic Medium Cond" name is longer than 31 characters.
  
  HC3096: WARNING: topic help.rtf vmmi_online #1:
  
  The name of the police "Franklin Gothic Medium Cond Baltic" account longer than 31 characters.
  
  HC3096: WARNING: topic help.rtf vmmi_online #1:
  
  The name of the font 'Gill without MT Ext Condensed Bold CE' is longer than 31 characters.
  
  HC3096: WARNING: topic help.rtf vmmi_online #1:
  
  The name of the font 'Gill without Ultra Bold Condensed CE' is longer than 31 characters.
  
  HC3096: WARNING: topic help.rtf vmmi_online #1:
  
  The name of the font "" Tw Cen MT Condensed to Extra this"BOLD" is longer than 31 characters.
  
  I assume these are the reason why I can not compile... I can't find these fonts in the list of styles that I used... How to find if they have been used? What are my options to resolve this problem? and why all of a sudden this is happening... I had no such problem last year when I compiled this same file.
  
  Thank you
  
  Ko

  THE FINAL SOLUTION:

  Removal of the rtf was NOT working.
  Try to work with regenerate hpr/hpj files did NOT work.

  Finally, I created a new project. In the HR solutions Explorer window, then I went to the file > import > document and imported the file the original file .doc (who would not compile). Who brought in all my subjects, etc... so it's good to go. I then deleted the .doc created automatically when I created the new project. She had the heading 'Welcome' in it anyway... so I deleted and just kept the .doc imported from the original file.

  At this point, all I had to do was generate a table of new contents, then compile... and VOILA!

  I HAVE HAD ER DONE!

  Thanks to Peter and Simon for all of their suggestions, patience AND HELP! :-)

• Impossible to compile WebHelp

  I use the evaluation version of RH6. I tried to compile an existin project built with RH5 and Word 2000. There are three documents to help the project. I tried twice compile the project after checking her disappeared, and the program crashed after "Startin compile. The progress bar reached about 60%. I condensed the three documents into one and tried to compile with the same result. Please tell me how to fix this.
  
  Peter

  There is a limit of about 25 subjects in the trial version. Could this be it?