Impossible to compile hlp

Similar Questions

• OPM - impossible to compile Excel documents

  Hello
  I get the error "" Impossible to compile the "location of the <>file" document because it does not contain the macros modeling Oracle policy"every time I have compile an Excel document and Pluggable software component Oracle Policy modeling is not present in same Excel when I open the file in the Project Explorer. OPM shows the following error: "an error occurred during the opening of the"location of the <>file"document: cannot set property Installed the AddIn class. Please help me with this.
  
  Thank you
  Naveen
  
  Published by: Naveen Meyer August 20, 2012 05:39

  I found this in another link showing where to check that the Add-in Oracle Policy modeling is available.

  For Office 2003, I found the add-ins under the Tools-Add-Ins

  Take a look at the Setup Guide for Oracle 10.3.1 Policy modeling. There is a subject in the lower part which has certain measures that may be relevant to your situation. For more convenience, I copied some details:

  The following is a possible workaround that will allow you to manually activate the Oracle strategy
  Modeling of add-in for Excel:
  (1) open the Excel document outside the Oracle Policy modeling.
  (2) select Options Excel in the Office Menu (upper-left circle). Select Add-Ins, can find
  Manage: Add-ins Excel and click Go...
  (3) place a check mark in the box Oracle Policy Modeling Excel 2007 (if it is already checked, try to uncheck,
  by clicking on OK and it turns once again).
  4) click on the OK button.
  (5) try to open the workbook again in the Oracle Policy modeling.
  If the Oracle Policy Modeling AddIn for Excel does not appear in step 3, you should be able to locate
  It is in the installation of Oracle Policy modeling templates directory. The default location is:
  C:\Program Files\Oracle\Policy Modeling\templates\Oracle Policy Modeling Excel 2007.xlam

  Published by: 941611 on August 20, 2012 11:32

  Published by: 941611 on August 20, 2012 11:37

• RoboHelp for Word 7 is not save the rtf and won't compile .hlp

  I use RoboHelp for Word 7 for producing WinHelp files. It has been working fine since several months on this computer.

  Just in the last week, I had a problem with my Word 2007 when you try to open a .doc file. I received the message that the nswrd632.wpc converter was not found. After a search on the Microsoft forums, I edited the registry and saved this converter.

  But now (and which may be unrelated to the Word Converter message) HR will not save the .docx or .rtf file. Whenever I click on save all, nothing happens. When I click project output, the message I need to back up the files, and I click Yes to all. Nothing happens except the message is closed. No files are saved and HR will not end. The only way I can get out of HR is to click on no, which means of course my changes are not saved. I can't save the file menu of Word .docx, either.

  Also, I can not compile the file. Yet once, no error message, just does not compile.

  I searched the Word HR forums, so that I reinstalled RH, made sure HR add-ins are enabled and removed all the .dot files. Nothing works. I went extracted 112 of Peter Grainge and followed the instructions there - no change.

  I found that, after making my changes in the Word document, if I save manually the RTF file by going into the directory Word save slot, the changes will be saved and HR compile the .hlp file - once.

  Any ideas?

  Hi, I have a problem almost identical, except that my project uses rather than .rtf files .doc files. I was able to solve the "unable to save" problem by following the information below. I still have not solved the problem "cannot compile.

  I use Windows XP, RH7 build 100, Office 2007. My project was created by using Office 2003 and I haven't lived all these issues until I recently upgraded to Office 2007.

  This correction was sent to me by guy 'tech' in my group.

  A number of Adobe RoboHelp for Word 7 users have reported that they cannot save the changes or generate output. The issue has been isolated to the RHComAdd.DLL be disabled.

  Check in Word:

  • For versions 2003, go to help | Everything | Disabled items. If RHComAdd.DLL display, re - enable.
  • For Word 2007, click on Office button | Word Options | Macros complementary. Under 'Manage' select disabled items, and then click Go. If RHComAdd.DLL appears, highlight it and turn it back on. (This IS WHAT I DID)

  You can also re - register the DLL. Go to start | Run and type the following line, assuming that you have installed RoboHelp at the default location.

  regsvr32 "C:\Program Files\Adobe\Adobe RoboHelp 7\RoboHELP\RHComAdd.dll"

  How to get off this DLL? The cause was identified as a Word document is open in Internet Explorer rather than in Word.

  This problem has been fixed in version 7.0.2.

  Hope this helps you. I'm still working on the compilation error.

  -Shannon Mooney

• Impossible to compile new TZ with ZIC

  Hi all

  I'm trying to compile the new timezone for my country (America/Chile), but the system won't let me.

  Any ideas on what it could be?

  Info:

  OSX: 10.11.4

  Journal:

  root:(/Users/cfuentea/Desktop/Hora) # zic South America

  Zic: cannot delete/usr/share/zoneinfo/America/Argentina/Buenos_Aires: operation not permitted

  root:(/usr/share/zoneinfo) # ls - la

  Total 24

  -r - r - r - 1 root wheel 6 Feb 4 VERSION + 22:23

  drwxr-xr-x 67 root wheel 2278 Mar 21 16:53.

  root drwxr-xr-x 45 wheel 1530 Sep 30 2015...

  drwxr-xr-x 56 root wheel 1904 August 26, 2015 Africa

  drwxr-xr-x 145 root wheel 4930 Mar 21 16:53 America

  Thank you in advance.

  For after this post: https://forums.developer.apple.com/thread/4731?q=SIP, it's because these files are part of the "Protection of the integrity of the system. This means that Apple can touch, not the user (even using sudo). They appear as tight with a "ls - lO":

  > ls-lO/usr/share/zoneinfo /.

  Total 24

  -r - r - r - 1 root limited, 6 Feb compressed VERSION + 22:23 4 wheel

  drwxr-xr-x root wheel 56 restricted 1904 3 October 2015 Africa.

  drwxr-xr-x root wheel 145 restricted 4930 Mar 21 21:39 America.

  wheel of root drwxr-xr-x 14 limited 476 3 October 2015 Antarctica.

  ...

  If you look around, there is no known way to edit these files... unless Apple out a Patch, Chileans are left in limbo, which is VERY BORING.

• Internal error OR-farm - impossible to compile the FPGA VI

  Hello!

  When I try to compile any FPGA VI with LabVIEW2013 or 2012 SP1, I get the following error:

  "Year error occurred trying to connect to this server compilation."

  Details:

  Internal error OR the farm: Client Server received unexpected or bad data. »

  Intermediate files are not generated, the error message appears immediately after I have select build of build specification or I click the run arrow.

  I use the local server for compilation.

  The equipment I use: CompactRIO Evaluation Board - SbRIO9636, DELL laptop, Intel core2 Duo T5800, 2 GHz, 3 GB RAM, Windows 7 Ultimate 64-bit, SP1.

  The intermediate files CAN be generated without any problems if I select in the menu. If I run the FPGA application compile worker, a ToolTip message specifying that "FPGA compile runs", but after a few seconds, another message appears: newspaper several attempts were unsuccessful - please see attached images.

  At first, I thought that my firewall (Comodo 6.3) is the reason for this, so I disabled it but nothing changed. Then I tried to fix LabVIEW FPGA and XILINX tools with the firewall disabled but din do not solve the problem. I tried with LabVIEW SP1 of 2012 and 2013.

  If you have any suggestions, please let me know! Thank you!

  

  

  We would like that you try to reset the NIAuth database by following these steps:

  1. go to Windows Services (Bring up Windows with Ctrl + Alt + Delete Task Manager, click the Services tab, click the Services button at the bottom right of the window.

  2 stop the NI Application Web Server and NI System Web Server services in this order (right click, stopping service and select).

  2 backup, and then delete all the files under %PROGRAMDATA%\National Instruments\NIAuth: registry.bin and commitmark.

  3. run NI System Web Server and NI Application Web Server services in this order.

  4. navigate to http://localhost:3580 / connection of an IE on the local computer and try to log in with username "admin" and password empty. Succeeds, the server will return one signed in as: message from the admin.

  After you follow these steps, try and connect to the FPGA compiler, and then let me know what are the results.

• Impossible to compile of the SMU-8101 Code

  Hello

  My system is an SMU-1065 chassis (I also had the same problem in the SMU-1082 chassis), SMU-8101 controller with Windows 7 installed by OR and the following instruments:

  DMM PXI-4071, power supply PXI-4110, DAQ SMU-6356, calendar card SMU-6674 t and Motion Control PXI-7332.

  I also have a SMU-8361 which I use from time to time and will be what I use in the long term.

  Now for the real problem. What happens is I put all code in labview by using the instrument of VI driver and everything works perfectly. I can do VI calling Subvi appeal VI instrument and it works fine, but if I double click on a VI instruments and then try to watch the block schema, for example, opening 'DAQmx create channel (I-voltage-Basic) .vi' it seems to break the code. At first he said nothing but once I hit the button the arrow will change to the broken gray arrow and claim that the code could not compile (this is without actually changing anything with VI, I open it and look what he did).

  Also any code I wrote called VI now get the same error if I click display error it will bring up a window I was looking for, so if I was watching the façade, then clicked on see the error it would bring just to the top of the front again without bringing out something. If I create a new file and build a little vi using instrument drivers, it works very well, if I copy the vi of the broken code and paste it into the new file it will fail with the same error.

  It is not to have this behavior with all the instrument of VI, but will happen with some. I mentioned, it comes up with 'DAQmx create channel (I-voltage-Basic) .vi' but then this does not happen with "DAQmx Timing(Sample_Clock).vi. I have not experienced and verified exactly what VI he comes up with, but it seems to happen with other drivers of instruments as well, not only for the acquisition of data. It seems also that occur when you use the SMU-8101. If I connect it to a computer this is not pop up. My business control primarily the chassis using MXI cards so we have no embedded controllers available that I could swap in to see if it still happens.

  It's not a big problem, glancing in the instrument vi is not necessary for me to do my job, I just do it to try to better understand what exactly is happening, but it's something I'm curious about.

  Hi arielm,.

  Have you tried to repair or uninstall/reinstall DAQmx? You can find the latest version here: http://www.ni.com/download/ni-daqmx-9.9/4707/en/

• cRIO vibrations project: impossible to compile maps RT

  Hello.
  I am developing a project to measure and analyze vibrations of an electric motor with three phases with a cRIO and a vibration module NOR-9234, working the first simulations to verify the proper functioning of the code with a 'NOISE AND VIBRATION SIGNAL SIMULATOR"OR.

  

  I use this code for the RT, but run this code. But when I run the code, an error in compiling associated with a delivery that I don't own.

  

  * I use two FIFO in the FPGA for accelerometers ' X and Y ' defined as follows:
  -type: target Host - DMA
  -Asked the number of elements: 3000
  -Data Type: SGL
  -Arbitration for writing: arbitrate multiple applicants only.

  I tried to remove and reinstall he grew and all its pilots, but the remains of the error, include the code I use the RT and FPGA.
  Thanks for your help and any other necessary data asked me.

  Looks like the sound and Vibration library is not present on the target of RT.  In order to install a library on a remote target of MAX, I think that the components of the library must be present on the host PC (as it is the source of the software being installed on the target).  Can you open MAX, click on the target distance and expand the software tab?  Is there a noise and Vibration library is listed as installed?

  Bob Schor

• Impossible to compile the FPGA in project

  Hello I get the following error when I am trying to compile an FPGA VI on a Compact Rio 9022, I missing something on my stand in? Everyone has seen this before and know what is happening? An internal software error occurred. Please contact National Instruments technical support on ni.com/support with the following information: 7 error error component the generator module VI: NULL Possible reasons: LabVIEW: File not found. The file may have been moved or deleted, or the path to the file would be incorrectly formatted for the operating system. For example, use- as Windows path separators: on Mac OS, and Linux. Check that the path is correct using the command prompt or file Explorer. ========================= NOR-488: The non-existent GPIB interface.

  This looks really familiar.  I know I've seen this error.  I think there is a problem if you upgrade to the latest NOR-RIO, but you don't put at level LV FPGA 8.6.0 to 8.6.1, or something like that.  Would it be, kmoyna?

• Impossible to compile using the beta 2 release

  When I read that Beta 2 is out, I immediately had to download, install and try yesterday. Unfortunately I can not compile more

  I always get the error:

  dyld: library not loaded: libQtXml.4.dylib

  Applications/bbndk-10.0.6-beta/host_10_0_6_1/Darwin/x86/usr/bin/lupdate.. .Pro

  Referenced from: /Applications/bbndk-10.0.6-beta/host_10_0_6_1/darwin/x86/usr/bin/lupdate

  Reason: image not found

  make [1]: leaving directory '... / source/bb10/translations.

  make [1]: * [update] Trace/BPT trap: 5

  make: * [Makefile] error 2

  I found a file called libQtXml.4.dylib, so I don't understand why it does not...

  Try the following command.
  1. open the Terminal application

  CD/Applications/bbndk
  ln-s target_10_0_6_384 / target

  In my case, it worked well.

  symbolic link host_10_0_6_1/Darwin/x86/usr/lib/libQtXml.4.dylib/libQtXml.4.dylib is wrong.

  host_10_0_6_1/Darwin/x86/usr/lib/libQtXml.4.dylib->... /... /.. /.. /.. /Target/Darwin/x86/usr/lib/Qt4/lib/libQtXml.4.8.0.dylib

  I think that it is correct
  host_10_0_6_1/Darwin/x86/usr/lib/libQtXml.4.dylib->... /... /.. /.. /.. /target_10_0_6_384/Darwin/x86/usr/lib/Qt4/lib/libQtXml.4.8.0.dylib

• Impossible to compile and run the project

  Hello

  Last night, my project ran and deployed to the alpha of dev without problem.

  This morning (and the only thing I've done is changed my icon and splash screen) it just sits there at 91%. When you look at the progress window there are two progress bars:

  1 says Syncing and application startup

  2 said launch myapp (blocked: user operation is pending of "" to complete).

  This eventually give up and display a dialog window:

  There is problem

  Synchronization and application startup

  Deployment failed: Info: request shipment: install and launch

  News: Native on debugging

  Information: size of the 648916759 file

  Info: installation

  Info: Treatment 648916759 bytes

  News: Progress 0%...

  News: Advance 4%...

  Info: 99% progress

  actual_id:

  actual_version:

  result: failure 812/var/tmp/cgic247239: duplicate member name ' native/MyAppName '.

  It's that last line that concerns me.

  Any ideas what is happening?  My other projects compile and deployment very well.  I tried to use the device-debug and release.  I rebooted the PC and dev alpha and even delete the running configs so that they recreated

  Thank you very much

  After more digging, I came across http://supportforums.blackberry.com/t5/Cascades-Development/App-Wont-Launch/m-p/1955639/highlight/tr...

  I also tried to create a new project, but the problem persisted. But what it show me was a warning in the bar file descripter.  The assets he suggested I had a duplicate png file.  The assets tab listed my assets folder (where the image was in fact), but it was also alongside icon.png.  So I removed that in the list and hey presto - all is well again.

• Impossible to compile for different JRE versions

  Dear friends,

  I'm trying to compile for different versions of JRE Blackberry that is 4.5, 4.6, 4.7 and 5.0. I chose the JRE version in a Configuration set, but when it is compiled is showing version 5.0 in deliverables/Standard. That's why on the installation of this application is in error "no additional applications can be found." Please help me out, I've also read several post but not able to find the solution.

  I don't have the option set Blakcberry version in Windows-> preferences of eclipse that is why I do in Run Configurations & run debug on the Menu. Also I don't think that it is to make changes to the files .alx file as I did also but no result. First of all, I think I'll get the compiled correctly output. Please help me.

  Do you mean that you can install the application several times, but then, this Desktop Manager error reports after a number of upgrades?

  Are increment you the version number of your application every time?  Otherwise, it will recognize the same version of fix on the BlackBerry Smartphone and will take no further action.

  Instead of using the Desktop Manager, you can also javaloader to add and remove applications on a BlackBerry Smartphone.  JavaLoader is a command-line tool that comes with the BlackBerry Java plug-in for Eclipse and the BlackBerry JDE.  It is not intended to be used as an end user install the tool, but is provided for developers who want to quickly add and remove different versions of their application.  It is found in the following directory:

  3.5.1\plugins\net.rim.ejde\vmTools Eclipse

  Command line to install an application:

  JavaLoader-u load fileName.jad (recommended)

  or

  JavaLoader-u fileName.cod

  Command line to remove an application:

  JavaLoader-u wipe f fileName.cod

• Impossible to compile in WebWorks

  I downloaded the mac version of the sdk for the Playbook WebWorks, followed the instructions and installed correctly.  But when I go to the command to compile the computer does not recognize bbwp...  I followed all the instructions, but maybe I'm doing something wrong.    Everyone was able to compile in a Mac?  What Miss me?  Are there additional measures that I have to perform on Mac?

  Any info will be appreciated.

  Thank you

  Found the solution here

  http://supportforums.BlackBerry.com/T5/Web-development/compile-install-on-Mac/m-p/742851#M8664

  had to run. / instead of just bbwp bbwp

• Impossible to compile Oracle HTTP 11.1.1.7 32 bit on 64 bit OEL6

  I try to install the Middleware part for the Oracle HTTP server. I get this error when compiling.

  / usr/bin/make-f ins_net_client.mk mkldflags ORACLE_HOME = / export/home/oracle/Middleware/Oracle_WT2 / / usr/bin/make-f ins_net_client.mk ntcontab.o ORACLE_HOME = / export/home/oracle/Middleware/Oracle_WT2/rm - f ntcontab.*

  (if ['compile' = "compile"]; then------)

  / export/home/Oracle/middleware/Oracle_WT2/bin/gennttab > ntcontab.c

  GCC - c ntcontab.c.

  RM-f /export/home/oracle/Middleware/Oracle_WT2/lib/ntcontab.o

  MV ntcontab.o/export/home/oracle/Middleware/Oracle_WT2/lib /.

  / usr/bin/AR rv /export/home/oracle/Middleware/Oracle_WT2/lib/libn11.a /export/home/oracle/Middleware/Oracle_WT2/lib/ntcontab.o; FI)

  GCC.orig: no input file

  MV: cannot stat 'ntcontab.o': no such file or directory

  / usr/bin/AR: /export/home/oracle/Middleware/Oracle_WT2/lib/ntcontab.o: no such file or directory

  make: * [ntcontab.o] error 1

  Here is a run down of my installed packages.

  [SERVER ~] $ rpm - qa | grep gcc

  4.4.7 - GCC - 16.el6.x86_64

  compat-gcc-34 - 3.4.6 - 19.el6.x86_64

  4.4.7 - libgcc - 16.el6.x86_64

  GCC - c++ - 4.4.7 - 16.el6.x86_64

  [SERVER ~] $ rpm - qa | grep glib

  dbus-glib-0, 86 - 6.el6_4.x86_64

  glibc-common - 2.12 - 1.166.el6_7.1.x86_64

  glibc-headers - 2.12 - 1.166.el6_7.1.x86_64

  glibc - 2.12 - 1.166.el6_7.1.i686

  glibc - 2.12 - 1.166.el6_7.1.x86_64

  glibc-devel - 2.12 - 1.166.el6_7.1.x86_64

  glibc-devel - 2.12 - 1.166.el6_7.1.i686

  glib2 - 2.28.8 - 4.el6.x86_64

  [SERVER ~] $ rpm - qa | grep libstdc

  libstdc ++ - 4.4.7 - 16.el6.x86_64

  compat-libstdc ++-33 - 3.2.3 - 69.el6.x86_64

  libstdc ++ - devel - 4.4.7 - 16.el6.x86_64

  The fixed. My script does not properly create the gcc41 file.

  Here is the link that I speak to you.

  Specifications and Oracle® Fusion Middleware system requirements

• Impossible to compile Adobe AIR for Android TV

  Hello

  We try to compile the AIR with the flags are:

  < android >

  < manifestAdditions > <! [CDATA]

  < manifest android: installLocation = "auto" >

  ...

  < / manifesto >

  []] > < / manifestAdditions >

  < supportsAndroidTV > true < / supportsAndroidTV >

  < banner > "path of the image of the banner (320 x 180 px, .png file)" < / banner >

  < / android >

  and get:

  C:\MediaSignageDepot\Solution\5.0\Products\SignagePlayer\Android\SignagePlayerAn

  droidApp - app.xml (206): error 103: application.android.supportsAndroidTV is a UN

  element/attribute EXPECTED

  Anyone had success compile those flags with Adobe AIR for Android TV last?

  We're uisng the flag of swf-version 31 and namespace 20.0 to try to access this feature.

  We use the AIR 20

  Kind regards

  -Sean http://DigitalSignage.com

  ____________________________________________

  MediaSignage.com, digital signage FREE for everyone!

  5776-D Lindero Cyn Rd #182

  Westlake Village, CA 91362

  Phone: 1.877.DIG. SIGN (1-877-344-7446)

  Fax: 1.818.337.0442

  Live support: http://chat.digitalsignage.com

  I see that beta support has been added for Android TV in one of the beta versions of AIR 20. Read this discussion:

  AIR 20.0.0.230 iOS install questions and support Android TV has stopped working

  It seems that you would have used equip 185 and not the final version. Or you can try an AIR 21, or 22 AIR beta version.

• Impossible to compile the XQuery modify

  Hi gurus. Oracle 11.2 EA running on Linux. SQL Dev 3.2.30.09.

  I'm pretty decent with XPath and XSLT, but I'm new to XQuery. I've set up a few simple FLOWRs, but I'm getting a little more complex. I have an XQuery query where I am trying to replace some of the inline data. I've clipped the real XML and code down to a very simple example that will always return the same error.

  The error:

  ORA-19112: error raised during the evaluation: XQuery Update cannot be compiled

  19112 00000 - "triggered when evaluating error: %s.

  * Cause: The error function was called during the evaluation of the XQuery expression.

  * Action: Check the error message for possible causes.

  Error on line: column 7:14

  My Xquery:

  SELECT XMLQuery( 
    'copy $tmp := $xmldata 
         modify (replace value of node $tmp/MSG_CNTNT_XML/Message/msgHdr/Source/Format/text() with "abc") 
       return $tmp' 
       PASSING msg_cntnt_xml as "xmldata"
       RETURNING CONTENT ) xmlmct
  FROM (SELECT xmltype('<Message>
     <msgHdr>
        <Source>
           <Format>CTS</Format>
        </Source>
     </msgHdr>
  </Message>') msg_cntnt_xml
         FROM DUAL) 
  ;
  
  

  Any general advice for XQuery and change is cool, but what I am really looking for, that's why I get the "update cannot be compiled. (BTW, note the misspelling, cannot, I don't judge).

  Tips for debugging or be able to view the intermediate outcomes would be great also.

  Thank you.

  LewisC

  Hi Lewis,

  What is your version of the database accurate?

  You try to use XQuery Update Facility (a small extension to XQuery 1.0) which is available only from 11.2.0.3 .

  On previous versions, you can use the updateXML() function:

  SQL > SELECT updateXML)

  2 msg_cntnt_xml

  3, ' / message/msgHdr/Source/Format / text () '

  4, 'abc '.

  (5) xmlmct

  6 (SELECT xmltype ('))

  7

  8

  9           CTS

  10

  11

  12 ') msg_cntnt_xml

  13 DOUBLE)

  14;

  XMLMCT

  --------------------------------------------------------------------------------

  ABC