Cropping the image

Similar Questions

• Excerpt from IMAQ (-1074396077), crop the Image

  Hello

  I have a 12-bit (Vosskuhler) CCD camera. I use the vi IMAQ, to take the image of the camera CCD the IMAQ Snap.vi. Communication to the camera works very well...

  I want to crop the image 'full', take a rectangular area in the interest of this image. For this, I use the Extract.vi IMAQ.

  Problem: when I try to crop directly the image that is from the camera, the Extract.vi IMAQ generates an error (-1074396077). BUT when I first save the image on a local disk, reload again and try to cut back then, then it works properly! What can be the problem?

  I have attached the vi that does not work...

  Thanks a lot for your help

  PS: I mean I have a solution with the save, close, and charging, but I don't like this!

  Cheers, Matthias

  Hello MJ77

  You can see what image type a vi came out of the snap function and also the ability to load from a file attached.

  I get the same error as you if image types are not the same.

• How to get the crop tool to crop the image in the Photoshop CC software freezes?

  Recently installed photoshop CC 2015 and when using the crop tool after pressing the check box the software takes forever and never crops the image. How can I fix it?

  OK what I did was select the crop tool and then right clicking on the icon in the upper left corner and the reset tool.

  That solved the problem.  Thanks for your help. Appreciate it.

• Graphic resizing function has changed, now crops the image, why?

  I must, without knowing it, changed some settings. So far whenever I bring you in graphic, such as a png or jpg, I can resize using the selection tool (arrow) and in a corner of the image I click, hold down the shift/command (Mac) and then shrink or enlarge the size proportionally. What has changed, it is now, the image does not like that, but rather the same manoeuvre crops the image in the direction where, as in using a mask function, the image doesn't change size but the border of it changes and part of the left image not visible. I guess that there is a setting that I don't know who is doing this, but so far have not been able to understand. Anyone know?

  Any responses appreciated as very frustrating.

  Thank you

  -Richard

  Selection of content will resize itself the image but not the frame.

• How can I increase the sensitivity of the crop tool? Harvest only moves in increments of 1/3 of an inch. Try to crop the image. Thank you

  How can I increase the sensitivity of the crop tool? Harvest only moves in increments of 1/3 of an inch. Try to crop the image. Thank you

  If you drag a rectangle and who knows, you might have to snap to grid turned on:

  Acrobat 11: View > show/hide > leaders & grills > Snap to Grid

  Acrobat 9: view > snap to grid (Ctrl + SHIFT + U)

• I need to crop the image in TIFF format. What product I need to buy

  I need to crop the image in TIFF format. What product I need to buy

  Photoshop should be able to manage your TIFF file, possibly Photoshop Elements so that would cost less than culture.  You should get the trial version to make sure that instead of buying before you try.

  You can also check if you already have something on your computer which can do.  On a PC, you should be able to click with the right button on the image and choose 'Open with' by which a program menu should appear with programs to open the file.  You can check if any of the people listed provide the truncation tool.

  If you have other questions you should post in the Photoshop forum instead of here (http://forums.adobe.com/community/photoshop?view=discussions).  This forum is mainly for questions about downloading and installing the Adobe applications.

• Urgent! CROP the image

  Hi all

  I want to make a request before the image uploaded to server, it will be first, cultures

  I use the plugin to take the image of the gallery but with I want to crop I have dcannt done.

  is there another way?

  Best regards

  Adha

  I used jcrop

  http://deepliquid.com/content/Jcrop.html

• How to crop the image to the screen?

  I use first Pro CC to create "how to" videos and videos of training for a software application. I recorded the videos on my laptop and unfortunately could not specify that only the application was registered. Accordingly, I have bleeding around the low - and straight edges where you can see my laptop background. Is it possible to crop the area and only end up with the portion of the image of the screen I want to keep?

  Add the cropping effect

  

• Lightroom3 crop the image

  How to crop a picture bigger than himself as in photoshop. I mean we can crop a larger image in photoshop and photoshop fills the outer parts with backgroundcolor. but inlightroom tool only allows to crop an image. is it possible to crop more in lightroom 3? If so, how?

  The only thing you can do in LR is scale down your image on a gray canvas.

  The lens corrections / scale.

  But it is of course very limited.

  (Nice to play with anyway because you can also up to a culture to the scale or rotation on a canvas grey)

  Frans

• How can I view and then rotate or crop the images duplicate

  My wife has a large photo collection (more than 50,000 images) and created a copy of a hundred photographs to include in a video that I'm trying.

  The problem is that I can't host elements to display these images because they are "double images".

  I had to go to "display" Location of the folder mode"able to find the directory.  When I did, I noticed the 10 subdirectories had not been imported, so I tried to import them and got this error:

  Nothing has been imported.  The files or selected it to import one or more files did not all types of supported files, or the files are already in this catalogue.

  I realize they are duplicates, but I want TO see them I can modify them (rotation, cropping, etc).

  (Q) is there a way to get items to 'jump me' to the original photo so that I can rotate or crop the 'original '.  NOTE: I use the Version value function or save my changes as a "new image" altogether.  I think that if it worked, I could create an "Album" that "duplicate" of the photo that my wife gave me and achieve what I have to do.

  I am brand new to elements (previously, I used ACDSee and it could do without hassle).  I have heard and read that organizing Elements 9 is much improved, so I wanted to give it a try.

  (Q) elements have a simple checkbox to allow me to work with duplicate images?

  (Q) is the solution to create a different catalog?    I did to work around this problem (for now).

  Also

  (Q) Elements 9, have a way to show all the images in all the files under a given folder?  I found that if I have a directory that contains 10 subdirectories, when I'm in the upper level without images directory are displayed.  In ACDSee, it show me all images in a directory given, including all subdirectories.  Is it possible to do it in Adobe Elements 9?

  Thanks for any help.

  The Organizer is not a browser, it's a database: even if he can show the photos in your folder structure, it works only on files that have been 'imported' and listed in the catalogue. It can show your saved photos displayed according to the structure of actual file based on the paths saved with each file present, but you will have problems if a top-level folder is empty.

  However, items saved in a catalog cannot be duplicates, and the Organizer prevents duplicates to be registered. There is no simple way to one click to override this constraint, which would mean another database 'key', that is to rename the duplicates, you wish to register.

  In practice: since you have to rename duplicates before importing them, you could do this directly in Windows or any other freeware like Faststone photoresizer.

  Or you may open these images directly from the Publisher, the navigation in your folder structure.

  Imagine you have duplicates in a folder and rename them and import them using only the PES:

  -To the editor, use the 'treat multiple files' to export the files in this folder and rename them, e.g. "IMG_0012.jpg" + "dupl" indicating the same destination folder

  -Try again "get files and videos ' Organizer.

• Photoshop Elements 9: fill edges after crop the image

  Hello together,

  I generated a beautiful panorama with PSE9, after that PSE9 asks me to fill in the edges. But the part that needs to be filled are big quiete, to cause deformation in the panorama. And I always get the message that I have not enough memory to complete the edges. So my idea was to crop the panorama and fill the edges after that, but I could not find the option to fill the edges in the menu bar.

  Can someone tell me how to do this?

  Welcome them

  g0dj0e

  To me, unless I use very small images, it does work if space on board is very low. Otherwise (as if I get a bow tie shaped pano), he sulks and throws it toward the top of this message. Another possibility would be to go to elementsvillage.com and search their forums - someone ' one has posted an action that allows you to use content aware patch, as in full Photoshop. You can use it after leaving the photomerge.

• Crop the Image

  Hello

  I'm putting a picture that I have on a circle, then the outside of the circle to leave me with the image in the circle of cultures, but I just can't understand how do.

  Here's the photo below, the photo space is the pic I want to put in the circle.

  My other problem is when I put the image on the circle, I can't then select the circle under because it blocks the image.

  Any help would be really appreciated,

  Thank you

  

  Move the circle above the placed image. Select both and "object > clipping mask > make.

• copyPixels crop the image without reason! Hope someone a fine

  Hi, I use copyPixel to cut the big picture downloaded on the net...

  in this example the image fit perfectly but the end of the code cuts the image...

  You do not see in the picture final shoes...

  I may put something...

  Thanks for your help

  fully functional code (extract):

  var d: Loader = new Loader();

  var e: URLRequest = new URLRequest ("http://27.media.tumblr.com/tumblr_lw7gtfj45S1qzrlbho1_400.jpg")

  d.contentLoaderInfo.addEventListener (Event.COMPLETE, lisenFullcouv);

  d.Load (e);

  function lisenFullcouv(e: Event) {}

  var myImage: Sprite = new Sprite()

  myImage.addChild (d)

  trace ("front,", myImage.height, myImage.width)

  If (myImage.height > myImage.width)

  {var a = 480 myImage.height; myImage.scaleY =; myImage.scaleX = ;}

  trace (myImage.height, myImage.width)

  pass var: BitmapData = new BitmapData (myImage.width, myImage.height, true);

  past. Draw (MyImage);

  trace ("pass", passe.height, passe.width)

  This part of the code cut the image and it shoudn't...

  Cup of var = new BitmapData (321, 480, true);

  cut.copyPixels (Rectangle (0,0,321,480) going on, new, new Point (0,0));

  transformer in bitmap to display.

  see var: Bitmap = new Bitmap (cut);

  trace ("see", voir.height, voir.width)

  addChild (see)

  }

  What you trying to do? If you try only to scale an image to a new format, you don't need code so much. And you want to use a Matrix object to scale when you make a draw draw.

  See if that helps. I've got rid of some extra code and comments, so I could read more easily:

  function lisenFullcouv(e: Event) {}

  Bitmap (d.content) .smoothing = true;

  var m:Matrix new matrix());

  m.Scale (. 8. 8);

  pass var: BitmapData = new BitmapData (320,480,true);

  past. Draw (d.Content, m);

  see var: Bitmap = new Bitmap (past);

  addChild (see)

  }

• Crop the Image Tool - an Illustrator CC 2014

  I am looking for tutorials on how to use the 'Crop Image' tool in Illustrator CC 2014. Can someone point me in the right direction please?

  Hi Jacob & rambour,.

  Thanks for your replies. I've solved the mystery - he belongs to the clever plugin graphic Rasterino.

  Thanks for your help.

  See you soon,.

  Nick

• CS5 Merge to HDR crop the images during the alignment?

  Hello

  I am using photos HDR merges to build a panoramic view in Autodesk Stitcher.  When I use Photoshop Merge to HDR, stitcher program gives an error that it is unable to Sting as the file sizes are different. When I use Photomatix Pro 4.1 to create HDR, there is an option to disable cropping. This fixes the problem with Stitcher.  If Photoshop cultures during HDR merging, y at - it an option to OFF turrn?

  Thank you

  Joe

  I don't know if it cultures, but it does not change the pixel dimensions (size) according to how to get your images out of alignment are if you use auto alignment.

  You can only deactivate in the open HDR Pro dialog box:

  

  MTSTUNER