Cryptsvc.dll serious problem with Windows Update.

Similar Questions

• I have problem with windows update

  I have problem with windows update

  and I can't find the Hebrew pack in windows update?

  I have windows 7 ultimate

  You use this procedure: http://support.microsoft.com/kb/972813 ?

  Hebrew should be available, see: http://windows.microsoft.com/en-GB/windows7/products/features/language-packs .

  All the answers and suggestions are provided by an enthusiastic amateur and are therefore no explicit or implicit guarantee. Basically, you use my suggestions at your own risk.

• Problems with Windows Update after uninstalling SP2 (Vista Home Premium)

  Hello, everyone!

  Two days ago, I tried to install SP2 through my Windows Update. During the installation and then restart, it stopped on step 3 (0%), ignored and open Windows normally. But, I realized that I had totally lost Aero (I didn't even have the option in the window color and appearance), and also Windows Update constantly gave me the message that I always important updates - SP2 has not installed correctly (I rebooted the computer several times to try to resolve this problem, but everything remained the same: stop on step 3) ", running Windows, and once again the message that I've updated important). I searched in various forums, but could not solve the problem, so I decided to uninstall SP2 via Control Panel. But it doesn't let me do that - whenever I clicked on the button uninstall, it says that the installation is not finished yet. So, I tried the system restore, but whenever I clicked it, an error message (that I didn't understand at all) appeared. So, I went into safe mode and tried the system restore and it worked (Control Panel uninstall option does not in Mode safe either), and everything is back to SP1. But now I have problems with Windows Update - I get the error message 0 x 8007002 (and even 0 x 8007005 several times). I tried everything I could find in the forums (the thing with automated updates service does not because I don't have this option in Services), but nothing works. If anyone has any advice whatsoever, I would be really grateful for that, because I don't know what to do.

  For safety, I use NOD32 anti virus, Tall Emu Online Armor and ThreatFire.

  Thank you very much!

  Hi EvanaZgb,
  Thank you for visiting the Microsoft Answers forum.

  I would say to first disable the anti virus and other security software. Then proceed as follows:

  STEP 1
  ------------
  Download and install the latest version of Windows Installer
  To install the latest Windows Installer, visit the Microsoft Web site at the following address:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  Step 2 now try to update again and post back with the results
  ------------
  Cleanup, utility to download and install the Microsoft Windows CleanUp utility. To do this, see the Microsoft Web site: http://download.microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe

  Now try to update again and post back with results

  Thank you

  Martin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• The problem with Windows update - automatic updates service won't start not (error 126)

  original title: the problem with Windows update

  Please help me to get Windows Update operational return.

  XP Media Center Edition, Version 2002, SP3

  Had a problem with "Generic host process for Win32 has encountered a problem and needs to close."  Follow-up of the instructions on this link:
  http://support.Microsoft.com/kb/931852

  Seems to have cleared the error message.  So far so good.

  However, now a Windows Update does not work.  Security Center Windows were told to go to control panel > system and use the Automatic Updates tab.  But, if I go to control panel > system, the Automatic Updates tab does not appear.

  I also went to the control panel > Services.  Tried to start the automatic updates service.  Received this error message: could not start the service automatic updates on Local computer.  Error 126: The specified module could not be found

  I already followed several instructions on this subject:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/cannot-access-Windows-automatic-update-after/aeaec175-01f4-47ed-8F97-55b854af4220

  In the thread above, I was following the post on 30 August.  According to Option A, I completed step 5 for the uninstallation of McAfee Security.  At this time, my network card has stopped working.  On the recommendation of the officer, I posted to the Malwarebytes forum.  The officer determined Malwarebytes that I don't have a malicious software.  I ended up posting on forum McAfee to get my network card works again.  Then I reinstalled McAfee and start to run Windows Update.

  I started with Option A, step 8 to reset Internet Explorer using http://support.microsoft.com/kb/923737.  The difficulty it has worked very well.

  Then Option A, step 9 says reset Windows Update using http://support.microsoft.com/kb/971058.  When I ran the difficulty in default or aggressive mode, I got an error message saying: he cannot start wuauserv.  The message asks me to verify that the user has privileges to take this step.  Well, I checked through user accounts who am the only one user set up on this PC and I have administrator privileges.  Help me please run this difficulty or recommend another way to get Windows Update works again.

  [1]... looks like you are saying that my system is so wet that a clean install is the (only?) way to go.

  [2] if I do a clean install, not only what I need to reinstall Windows and all my applications, I also have to reinstall the drivers... Etc. ?

  [3] I think I have the disks supplied with the PC system. Is it better to use than to use the recovery partitiion?

  [4A]... is there a possibility that some of [my data are] infected?

  [4] preventing me from simply infect the whole PC again?

  A1. Yes, and it was my recommendation in August, too.

  A2. Yes.

  A3. Only not really well using the restore Partition hidden to make the "destructive recovery" will include all drivers, etc., that have been installed at the factory.

  A4a. Yes, a real possibility.

  A4b. You run at least three 3 tests on the backup data before restoring one (1) with your installed & updated up-to-date anti-virus application (for example, Microsoft Security Essentials) and two 2 with good reputation, free online scans (e.g., ESET;) Bit Defender; Kaspersky; HouseCall; (F - Secure).

  If you have saved your data on CD/DVD, the disc scanner. If you have backed up your data to a flash drive, SD card, or another external drive AND KB971029 is installed, analyze the drive.

  If you have any questions or need additional help, please start a new thread in this forum: http://answers.microsoft.com/en-us/windows/forum/windows_xp-system

  Once again, good luck!

• Problem with Windows Update after the removal of Virus

  My operating system is Win Vista 32 bit, had some virus closed my windows updates, have a view of the white page. Checked that my services and win update is in automatic mode has started, so I don't know why my updater gives me a red x saying windows updater is turned off.  Any suggestions?

  [Original title: Windows Update]

  https://answers.Microsoft.com/en-us/protect/Forum/protect_other-protect_scanning/problem-with-Windows-Update-after-removing-virus/3a8dd279-2732-4693-88bf-f5cea4afca96>

  It makes more sense. How to reset the Windows Update components?

  Yet, as indicated in The ball , the search results links do not work. I also used several browsers and DuckDuckGo. Maybe it's because the Windows Update Agent was changed some time ago and the article is no longer valid.

  EDIT: If the OP is also struggling to access the link I suggest using repair Windows updates available from tweaking.com. I suggest also using the Registry backup of the same author before hand.

  Repair the Windows updates

  http://www.tweaking.com/content/page/repair_windows_updates.html

  Registry backup
  http://www.tweaking.com/content/page/registry_backup.html

  I hope this helps.

• Im having a problem with windows update.

  Im having a problem with windows update. I am running windows vista.seems as it downloads the updates, but when he tries to install I have three different error codes.  80200053 80070570 - FFFFFFFE.  Help.

  The FFFFFFFE error can mean that you have a rootkit. And its blocking updates

  Download tdsskiller run it, everything it found, select cure and then restart your computer. Then try again

• problems with windows update, HP Pavilion, M9077c PC, computer locked up, said incorrect password

  The current problems with Windows update.  My son; computer s, Auto update has not ended.   Got a new set of updated the following day.  He locks up computer because now I get incorrect password message.    Discs to reboot I did before are not recognized.   All solutions?

  Hello

  I suggest you to try the steps in the following Microsoft article and check if this may help.

  How to use the system restore to log on Windows 7 or Windows Vista when you lose access to an account: http://support.microsoft.com/kb/940765/en-us

  For more information, see the following Microsoft article:

  http://support.Microsoft.com/kb/189126

  Hope the information is useful.

• Problem with Windows Update after the new installation of Windows 7 Pro the Lenovo ThinkPad X 200

  I'm trying to do a fresh install of Windows 7 Pro on a Lenovo ThinkPad X 200. The product key is easy to find on the sticker of the ThinkPad. However, the version of Windows is hidden (for example, I can't check that my ThinkPad had originally installed Windows 7 Pro). I was able to install by using a Pro Win 7 SP1 CD ROM I bought for another installation. I used the ThinkPad I was trying to make the new facility on the product key. I was able to activate the Windows 7 Pro using the phone call and my cell phone. I checked the activation! However, I have problems with Windows update. The product key may be a different version of Windows 7. If so, why did it install and activate OK? Y at - it a fix for this problem or I have to buy a new version of Windows 7 Pro? Please note that I have not yet installed all drivers Lenovo ThinkPad as I can't seem to install correctly. Thank you!

  Since the issue is updated to Windows, it is not a product number key.

  You can reset the Windows Update components by running the Fixit on this page. But if there is malware present, she will continue to reset the connection to the update servers:

  How to reset the Windows Update components

  http://support.Microsoft.com/kb/971058

  Suggest you download and save the Fixit. Then configure the system before the clean boot by running:

  How to troubleshoot a problem by performing a clean boot in Windows Vista/Windows 7

  http://support.Microsoft.com/kb/929135

  Once the Fixit has been downloaded and the system is started in the pure State, check that the native Windows Firewall is now on if a 3rd party firewall has been used previously. Now run the Fixit and choose the default mode. Restart once it's done and see if the system can be connected to the update servers. If he can't, then rerun the Fixit and choose aggressive mode. Turn it back on when he finished the race and updates.

• problem with windows update - said failure to configure updates changes in recovery

  Original title: problem with windows update

  computer says failure to configure updates changes in recovery but when you check the update history, he said updates succeeded, but one of them failed its been happening every time I turn on my computer went thrus my updates or not has them and if I update my computer will fix the problem

  Hello

  Thanks for the reply.

  Have you checked by installing the update manually?

  Send more information on the update failed, code number and update KB message.

  • Press the Windows and X keys simultaneously.
  • Click on Control Panel, then click on Windows Update.
  • Click view update history.
  • Double-click the update.

• Problem with Windows Update - Vista Business 32 bit

  I have continuous problems with the update (classified as Important) Microsoft.NET Framework 3.5 Service Pack 1 and .NET framework.

  This update is always offered to me, but it will simply install noty but I could try

  1. Is there an any secret to work this update?
  2. Is there anything I can do Vista ignore this update and npot spend time trying to download and install it - and also for having me to disassemble the time of everyu tick selection I'll update.

  Thank you in advance.

  F F
  

  Hi Fred Furry.

  Thank you for using the Microsoft Vista answers Forum.

  You can try the following steps and check if we are able to install the update.

  1. click on start, run, type cmd and then click OK.

  2. at the command prompt, type the following commands one by one and press ENTER.

  net stop wuauserv
  regsvr32 c:\windows\system32\wuapi.dll/s
  regsvr32 c:\windows\system32\wuaueng.dll/s
  regsvr32 c:\windows\system32\wucltux.dll/s
  regsvr32 c:\windows\system32\wudriver.dll/s
  regsvr32 wups2.dll/s
  regsvr32 c:\windows\system32\wups.dll/s
  regsvr32 c:\windows\system32\wuwebv.dll/s
  net start wuauserv
  output

  Make sure you disable any security software before installing the update.

  If this does not help, follow the article to manually remove and reinstall .NET Framework on your computer

  Use the Windows Installer Cleanup utility to clean up the State of MSI database for all versions of the .NET Framework.

  And then reinstall all the versions of the .net framework by downloading manually Microsoft Web sites in the link below:

  http://support.Microsoft.com/kb/923100

  NOTE: You can download the cleanup utility mentioned in method 2 of the article mentioned above from
  http://CID-6e60f9c3f18900f8.SkyDrive.live.com/self.aspx/dotnet%20Framework/Dotnetfx%7C_cleanup%7C_tool.zip

  Let us know how it works.

  Kind regards

  Yama - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problem with Windows Update!

  Hello!

  I have been using a computer HP (h8-1320eo) for about 11 months now, and I have a problem now.

  When Windows Update wants to install some updates, I let do and she successfully the download, but when he wants to set up updates, it freezes at 12%. First time I have let it run about 45-60 min, then forced to close. This happens every time, I shut down my computer.

  Initially, I contacted the Support of Mircosoft, nothing helps, I did some research and I found this discussion on a website (http://www.bleepingcomputer.com/forums/t/517267/sfc-will-not-complete-and-windows-update-gives-a-800...) And that sounds just like what's happening to me! And as I read down, I wasn't the only one, there are others, but they all HP computers.

  And that is why I contacted HP now, and sometimes the computer had some problems to open some files / or orders, for example "stop Installation" when I tried to stop Windows Update...

  Christian,

  I think that using a Restore Point to try and 'go back' is not enough to clear this error.

  It seems that there may be a recent problem with an update of Windows: KB2887069

  Reference Microsoft Forum: kb2887069 crashes at 12%

  You can try the following:

  • The system startup and logon
  • The Windows Updates Notify value (instead of automatic update)
  • Restart and sign (just because cela 'glue change', defines the kernel and make the computer happy)
  • Open windows updates
  • Look for the updates - which creates a list of the updates
  • Highest point and click right update KB2887069
  • Select this option to HIDE the update
  • Try to install the updates

  The same patch / update watch upwards in the list of Windows 8 update - it does not seem to cause problems.

  -----------------------------------------------------------------------------------------------------------------------------

  Reloading the image: use your most recent picture disc and recharge the system at this point.  Depending on when you created the Image, it's more or less painful. It will certainly take your system at this point in time, when everything worked.

  If you have never created a System Image, you can learn about it here:

  HP PC - creating and using a System Image to restore your computer (Windows 7) - c02053303

  -------------------------------------------------------------------------------------------------------------------------------

  If none of these suggestions work, then the underlying cause of your problem may be another that which has been previously documented.

  One thing you can try:

  Use the approach suggested above and hide the updates from one or more at a time, try to run the updates between selections.

  It is a painful process; It can help discover the question if KB2887069 does not cause any problems.

  ------------------------------------------------------------------------------------------------------------------------------

  Good luck!

• Problems with Windows Update

  VIRUS ON THE INTERNET, COMPUTER HACKING, INTERNET INTERNET CONNECTION AND CONNECTION PIRACY GET STOPPED DURING THE UPDATE OF WINDOWS WITH WINDOWS GENIUINE EVEN. WHY? I'VE HAD LONG IMPORTANT PROGRAM FILES IN MY LAPTOP BUT WHEN I UPDATED WINDOWS UPDATE MY INTERNET CONNECTION ALMOST ZERO AND WITH EXTENSION DLL A VIRUS COMES AND AS I AM LAYMAN IN COMPUTERS AND SO I HIM AND THEN I HAD TO REMOVE COMPLETELY ANY AND ALL THE COMPUTER FORMAT AND RE-INSTALL WINDOWS. WHY WITH VERSION GENUINE WINDOWS, AS I AM WITH WINDOWS 7, WHY WITH WINDOWS UPDATE IT COMES AND IT HAPPENS SUCH? I WAS DOWNLOADING WINDOWS SECURITY ESSENTIAL UPDATE.

  have windows 7 starter edition / cannot start the windows Defender / / applied for dot net passport/Passport active/never but I got no response on my passport net dot, the looks, the Veer mukherjee, * address email is removed from the privacy *, * address email is removed from the privacy *.

  Please answer all the questions of diagnostic following by number in your next reply (no need to quote this post):

  1. when (date about) don't you install Microsoft Security Essentials (MSE) and has been the computer fully-patched to Windows Update in time?

  2. What antivirus application was installed before installing MSE, was your subscription always news, and did you uninstall it before installing MSE?

  3 a Norton or McAfee application already installed on the computer?

  4. do you have a free trial Norton or a test of free McAfee come preinstalled on the computer when you bought it? (No matter if you have never used or activated).

  Additional references:

  Checklist for installation of Microsoft Security Essentials
  http://social.answers.Microsoft.com/forums/en-us/msestart/thread/bf757e6a-E320-4a67-92bc-767e6acb26c4

  Microsoft Security Essentials vs Windows Defender
  http://blogs.msdn.com/b/securitytipstalk/archive/2010/08/26/Microsoft-Security-Essentials-vs-Windows-Defender.aspx

  Can I install Microsoft Security Essentials [or any other anti-virus/anti-spyware application] to clean my already infected computer?
  http://social.answers.Microsoft.com/forums/en-us/msescan/thread/87058857-D181-4019-a723-efd9a49d9275

  Microsoft Security Essentials Support Forums (all)
  http://social.answers.Microsoft.com/forums/en-us/category/MSE

  You can start a free Support of MSE incident by opening your browser to https://support.microsoftsecurityessentials.com/.  Select the option "I think that my computer is infected", and then select the appropriate support available option for your region.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Problems with Windows Update! ("some settings are managed by your system administrator"?)

  I seem to have problems with my windows update. Last week when I checked to see if updates were needed that I was unable to view them because he said that "some settings are managed by your system administrator" who won't let me change the settings and the display of updates. It's my own personal computer so I am the administrator. However, this week update windows begins to function normally because there was an update available and I managed to download it, but a few days later, the windows on the screen update returned to say that "some settings are managed by your system administrator. I did a scan for spyware/adware/virus recently and I had only a low risk of adware that was detected and deleted without modification with windows update. This problem started right after that I got a warranty of software installed by Dell, I don't know if what they did could cause the problem. The system I use is Windows Vista Home Premium Service Pack 2. Any help would be greatly appreciated!

  You can see the effects of a hijackware infection. That being said...

  McAfee applications (and Norton) are known for not not upgrade (or uninstalling) itself.

  1. run this triple McAfee fix: http://service.mcafee.com/FAQDocument.aspx?id=TS100507

  2. After completing step 3 of triple correction, manually & repeatedly update your McAfee application until you get a prompt 'no more updates'.

  3. open Internet Explorer (only) to http://support.microsoft.com/kb/971058 & run it in DEFAULT and modes difficulty then AGGRESSIVE. [1]

  4. restart & test by...

  How will I know if my computer is up to date? :
  http://Windows.Microsoft.com/en-us/Windows-Vista/how-can-I-tell-if-my-computer-is-up-to-date

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Problem with windows update and Service pack 1 for Vista 32 bit.

  A screen will appear that says I need to download the Service Pack 1 for Vista. He also says that it is more optimal to download the much smaller file, through Windows Update, rather than on the site. But when I check the Windows Update, it did not for me to download. Update verification that history does not display it has been downloaded before, even if the other Windows updates have been. Do I need? Should I download the version + 400 MB of site or there at - it another way to download smaller files for my PC only? Any help appreciated. Thank you! Here is the text I copied and pasted pop up I got.

  ------------------------------------------------------------------------------------
   
  A problem with Windows Vista
  Windows Vista has stopped working properly.

  This problem has been corrected in Windows Vista Service Pack 1 (SP1).

  What is a service pack?

  An update to software that combines new security and performance with existing updates improvements. Service packs can contain new features or changes to the design of a product.

  To resolve this issue, follow these steps:
  Determine if your type of operating system 32-bit or 64-bit.

  How will I know if my system type is 32-bit or 64-bit?

  Click the Start button, right-click computer, and then click Properties.

  Under system, you can view the system type.

  The average of 32-bit and 64-bit?

  Both 32-bit and 64-bit refer manner that your computer (CPU) CPU processes information. The 32-bit versions and 64-bit Windows are designed for use in computers with 32-bit processors or 64-bit, respectively.

  For more information, go online and read this article for Windows Vista online help:

  32-bit and 64-bit Windows: frequently asked questions

  Check online at Microsoft Download Center to download and install Windows Vista Service Pack 1:

  Windows Vista Service Pack 1 for 32-bit systems
  Windows Vista Service Pack 1 for 64-bit systems
   
  -------------------------------------------------------------------------------

  In the end, P.S. - know what long and thank you in advance for taking the time to read and respond.

  In addition, unrelated question. Does anyone know why my computer would always have an icon in the lower right shows a storage device mass that I did not and when nothing is plugged into ONE of my USB remove locations?

  Ralleny,
  Regarding mass storage disks that appear, you have housing of memory card reader on your PC?  Usually they will appear like this.  I have a HP at home that has a Bay of 5 card reader to the front and I see the same type of items that you see. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have problems with windows update

  Hello

  I have problems with the updates of the window.  I read install my window.  and start the update.  I update well until it installs the update for service pack 2. Once it restarts is said to check the updates, you must first install an update for the update of the window...

  When I click on install update of the stop and keep it on the research.  I have don

  ' t even use all the data.

  I already tried the Microsoft fix it and some troubleshooting aspiration which I met on the Microsoft site.
  (error trouble shoots)

  Windows update error 0x80072efd - not fixed

  recent update - no fixed installation issue.

  Can anyone help me please with her.

  Thank you

  Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download the file to your OneDrive, to share with everyone and post a link here. Normal mode preferred report. Please say if the report was obtained in safe mode. If the report is in one language other than English, please indicate the language.

  Please download and share with everybody fresh copies of your System log and journal of the Application (two files) of your event viewer on your disc one and post a link here. You can delete any previous copies of your OneDrive records.

  To access the system, log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window, expand Windows logs and select System. Place the cursor on the system, select the Action in the Menu and record all events like (the evtx default file type) and give a name to the file. Do the same for the application log. Do not offer not filtered files. Do not place the cursor in the list of reports before selecting the Action from the menu. Do not clear the logs so that you have a persistent problem.

  For assistance OneDrive see paragraph 9.3:
  http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm

  General remarks on event viewer
  http://www.gerryscomputertips.co.UK/syserrors5.htm