Problem with windows update and Service pack 1 for Vista 32 bit.

Similar Questions

• Problems with Windows Update and load XP SP3

  I had a problem with my system and had to replace my HARD drive and reload XP and all my applications and data.  Now, I installed SP2 and try to install SP3. Windows Update does not work (get the 080244019 error code x) and when I try to install the SP3 files from the Microsoft site, it'll run about halfway through and then stop and hang, displaying the message "Finish Installation" with bar at halfway of the progression.  I tried the MSRT and FixIt nothing helps.  I checked services.msc to see all the required services are enabled or started.  I read that some malware will be stop some services without notice.

  After a few attempts to load the file SP3 failed, check Add/Remove programs in Control Panel Windows XP Service Pack lists 3 but no file size or to update the date information as with other programs.  My browser is IE8 and I was doing some Hot fix for Windows XP downloads, this adventure started about 3 weeks ago, but no other automatic update downloads.  I use the following McAfee provided by my ISP for protection AV and firewall with regular full scans.  Scan today revealed there is apparently a single trojan file that cannot be deleted, but there were no further details.  My system is also fully functional; I seem to get the updates for McAfee and other applications OK but not SP3.  I received or otherwise installed following updates or Hot Fix for XP downloads in the past 3 weeks:

  KB954550-v5

  KB932823-v3

  KB915800 v4

  KB884020

  KB926239

  KB2618444 (Windows IE8 security update)

  I found an answer on another forum on editing the registry for the "/ Edit EDWARD CSDVersion value ' but have not yet tried waiting for any response to this request.  I'd like some useful suggestions.  Thank you and happy new year!

  Thanks for the quick response.  I did some checking on my system, I have XP Home Edition ships with the system bought in July 2007.  Add/Remove Programs shows that the aborted install XP SP3 and IE8 installation; I tried to load the SP2 file but it doesn't show here as an addition, so it may have been part of the original XP CD and I just crush.  Even for IE7 so I am not able to drop back to all recommend you.  I will try your solution later today and post my results. I saved SP2, SP3 and IE8 in my office and a flash player to reload later according to your instructions.  Stay tuned.

  It would be unusual for a CD of Windows XP (official) to have integrated Internet Explorer 7.

• Facing problems with Windows Update and other performance issues.

  Hi, I have a Windows 7 (64 bit) for HP Pavilion dv6 laptop. Since January 5, 2014, my computer had problems. Windows Update stopped working. Whenever I try to run it, it says that the service is not running. When I try to set the agenda by running Microsoft Fix it, an error occurs. It says "Troubleshooting cannot continue because an error has occurred" and when I try to repair Microsoft Fix it with "DIAG_MATS_NETWORK_global", it does not detect any problems. The first time I met the problem was when I tried to play Minecraft; It wouldn't connect and when I tried to relog I get a "SocketException: unrecognized Windows Socket Error: 86 create." Microsoft Security Essentials has update problems as well and my Hamachi can not connect. Skype and all my other programs and video games, such as League of Legends and Maplestory all will work perfectly well. I've looked everywhere in the Microsoft Web site and cannot find a solution. Please help me solve this problem!

  Thanks, but I fixed it! I used the Microsoft Safety Scanner, and it fixed the problem. :)

• Is there a problem with the slice of Service Pack 2 for Windows Vista?

  I had to reinstall Windows Vista Unlimited twice already.  This is because the installation of Service Pack 2 for Windows Vista.  I had everything, including Internet Explorer 8 is installed during the installation of the Service Pack 2 has crashed my computer, and I had to re - install.

  Hello

  Please read: information about Service Pack 2 for Windows Vista and Windows Server 2008
  Includes installation tips and Microsoft Support.

  Also Please read: "How TO solve IE8 installation problems"
  Includes installation tips and Microsoft Support.

  Hope this helps, Vincenzo Di Russo - Microsoft MVP Windows Internet Explorer, Windows Desktop experience & Security - since 2003. ~ ~ ~ My MVP profile: https://mvp.support.microsoft.com/profile/Vincenzo

• Problem with windows update and get Vista service Pack2 installed

  I'm running Windows Vista Home premium with service pack 1 installed. I have 2.00 GB of memory and running a 32-bit operating system

  When I open some websites it comes immediately closes and you said "Internet explorer cannot open this site" then the cottage site and says '' abandoned operation. ''

  So I thought I would upgrade my system. Whenever I have shut down my computer it asks to install updates - I have let that happen, it always lists the same updates and even though it shows that they have been correctly installed. Next time I'll look in the list of updates - the same updates appear. When I try to update to Internet explorer 6 to 8 or 9 it says I need service pack 2. When I try to install service pack 2, I thought after I have started to install pack 2, service pack 1 must be installed. When I download and try to install service pack 1, it indicates that service pack 1 is already installed.

  Any ideas on how to get my internet explore updated would be greatly appreciated.

  Thank you

  I have version 6.0 (build 6001: Service Pack 1)

  My internet Explorer is:

  Version 7.0.6001.18000

  Thanks for your help.

  When downloding a new application, applet, or executable file or program msi, I always choose to SAVE them to the DESKTOP, then I make a folder and copy the downloaded file to the new folder when the program is fully downloaded, I then run my hand registered antivirus program to ensure that it is virus-free. (right click, then choose scan with "antivirus program").

  Once I know it's clean and stored safely, I disconnect from the internet, disable my antivirus program, & close all processes not essential in the Task Manager.

  Then go to the folder "New folder" and double-click the new application to install it without interference.

  Once it is installed, restart your computer to start your antivirus program and already completed process automatically and then if it needs to access the INet activation or registration, it can do so safely.

  It a new application and ask you if that's OK, you know is very well since you just installed it will say your firewall.

  I've never had a problem with failed facilities or other interference from program using this simple step-by-step process.

  Methods to download the latest service pack (VISTA SP2)

  Method 1: Turn on automatic updates (recommended for most users)

  Method 2: Check the updates on Windows Update (same method 1 but not automatic)

  Method 3: obtain the latest Windows Vista from Microsoft Download Center (full file) service pack http://support.Microsoft.com/kb/935791/#Method3 >

  (Good to use if the computer on which you want to install the service pack is not connected to the Internet)

  Go to http://technet.microsoft.com/en-us/windows/dd262148.aspx> and look right.

  Things to know about SP2 and FAQs.

  Examine them carefully and see if it meets most or all of your questions.

  You will also notice the site available for full download download which can be used instead of the Windows Update. service

  As you can see Vista SP2 contains all updates released since SP1, download via AU (automatic updates) you get only what you need, by downloading the full file all you and you have it if you like for later if you need IT.

  For Service Packs, I prefer to download the entire file and then install offline after you have prepared the system first.

  How to obtain the latest Windows Vista service pack

  http://support.Microsoft.com/kb/935791/en-us

  How to install or uninstall Internet Explorer 9 IE9

  http://Windows.Microsoft.com/en-us/Windows7/how-do-i-install-or-uninstall-Internet-Explorer-9>

  Support for Internet Explorer in this forum:

  http://answers.Microsoft.com/en-us/IE

  04/12 / 1109:16: 23 pm

• Windows update and service pack 2

  I am running windows vista service pack 1 and windows update says I'm to you same day I don't have service pack 2 installed. so I downloaded the standalone version of SP2 and tried to install it and it give me error: 0x8004100a

  What should I do?

  Error message when you try to install updates in Windows Vista, and the installation may fail: "WBEM_E_CRITICAL_ERROR (0x8004100A).
  http://support.Microsoft.com/kb/952577/

  TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• Problems with windows update and upgrade to Windows 10

  OS: Windows 7 Ultimate 64-bit Service Pack 1

  CPU: Intel i5 24 GB ram

  Product is enabled

  1. I'm unable to install the last update of security for Silverlight.  I tried to uninstall the application, but cannot.

  I am unable to run any apps or apps problems fixit.

  They have all the same details:

  Unknown package ID

  Path: unknown

  Error code: Ox80070003

  Source: temporary files

  I doubled the verification and services:

  Background

  Windows Update

  CPP

  Windows module

  are started

  I down loaded the tool for creating Windows Media and it failed after reaching 100%

  I downloaded several programs fixit, but none works

  Where should I go from here?

  After trying several things, I finally got 10 for the windows installation.

  I had to create a new admin account and did all the updates from there.

  Thanks for your help

• Problem with the installation of Service Pack 2 for Windows Vista. 8024200d error code.

  I have made several attempts unsuccessfully to update my vista using the automatic update for service pack 2, but I always "update has not 8024200d error number". I tried a start-up in minimal mode, but automatic update does not appear. I reached my intellectual limits. What means exactly the error 8024200d mean?

  How do I beat successfully automatically update?
  F....

  Hi Mubarak,

  Can you please tell me the number of KB article of updated with the question?

  Take a look at the response from here-

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_update/i-am-getting-error-code-8024200d-when-trying-to/b0ae43eb-8e84-4a71-94af-75318c984d45

  Thank you.

• After installation of Service Pack 1 for Vista 64 bits, Windows Security says Malware and firewalls are off.

  I recently reinstalled my copy of Vista 64 bit I hope to solve this problem that has been with me for a while.  Before I wiped and reloaded, Security Center Windows would alert me every day that my firewall protection and malware have been disabled.

  I use Kaspersky Internet Security, which is fully updated and works as it should.  I am able to activate Windows Firewall and bypass the firewall Kaspersky and that error to go away, however, I can't remove the error of malicious software.  I got all these errors directly after a restart after the installation of service pack 1.

  Under Windows Security Center it says, "Kaspersky Internet Security reports that it is turned off," under the heading for malware protection.  When I click on the button to activate under Windows Security, it goes through the steps who say do you trust this program, Yes, Yes, ok.  After choosing all the options of trust Kaspersky and activate this protection, he thinks about it a little, but always returned and said it's off.  It also has a green light saying that Windows Defender is actively protecting your computer.

  I think that my Internet Security Suite is successfully active in these areas and work I checked the menu, check that they work.  In my opinion, after installation of service pack 1 that something I have messed up in the statement that those programs are active or really uninstalled them.

  Even if I can get the only message that the Kaspersky firewall is disabled to disappear by enabling the Windows Firewall, which is not yet as I want.  I want the suite of internet security that I paid to be active and functional on the side of the Windows security features.

  I would appreciate any help with this problem by addressing why he continues to warn me that my protection malware and firewalls are disabled.  Thank you.

  Also install Windows Vista SP2 this problem could be solved, otherwise try to uninstall and reinstall Kaspersky and also, try to get the latest version of Kaspersky.

  If still the same issue please contact Kaspersky support.

• Has no installation of Windows Service Pack 2 for Vista 64-bit

  I was invited to update itunes on my computer, but when I tried to do kept Windows close Explorer.  When it finally loaded the upgrade she flashed an error message and delete some files needed - which continues to happen at any time that I try to fix the problem.  Now my itunes program does not work.  I did a reading online and decided to try the upgrade to service pack 2 - thought, maybe because I still had the old version, that it didn't work with the new itunes 'things '.  Got an error message indicating that the service pack 2 is no longer available.  Huh?  That now I do--my itunes account is no longer usable, I've probably lost all the songs I paid for (my stupid fault for their backup do not) and I am pretty irritated that I am seriously thinking of just junking my PC and go with a Mac!  I'm not the most computer savy person - I want to start, do things to base prevention/implementation - level and go in my life this computer is only about a year or so old - should not be this frustrating!  You can provide any help would be greatly appreciated.

  Hi MyKindaFlower,

  Check out the following articles to help your question:

  http://support.Microsoft.com/kb/948465

  and

  http://support.Microsoft.com/kb/947366

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Unable to update the Service Pack 1 for Vista

  PLEASE, SOMEONE HELP ME

  I'm new to all this. I have a laptop and have somehow an update for service Pack 1? Whenever I'm trying to download it then lift back with a load of error messages that I don't understand.

  I tried to download the pack that took 1 1/2 hours but she still cross properly. It lists a few kb936330 kb943899 kb936782 kb936021 kb947562 there are loads and loads of these kb numbers.

  Help! If anyone can help you'd want to answwer.

  PS: I'm part of the older generation so keep instructions for the jargon that I understand

  Thank you very much

  Hello

  May I ask how you are trying to install the Vista SP1?
  You try to first download it from the Microsoft Web site, and after a full download you are trying to install it?

  I have a Vista on my laptop too and I installed the Vista SP1 through the automatic update of the OS.

  The Vista SP1 update automatically, please go to-> Windows Update control panel.

  Here you must press the button install updates.

  The entire procedure will take some time, but everything should run automatically.

• Update Service pack 2 for Vista Home Premium; A LOT of mistakes happened

  Hello

  I have problems with the installation of Service Pack 2 for Vista Home Premium.
  -tried 3 x to install it via the updater failed.
  -tried downloading manually in vain.
  -Setup always failed.
  After trying to install it manually and after restarting, I logged. Then Windows asks me to activate now.
  -J' tried to activate Windows online, and retype your product key, but once I typed the product key, the Activation of Windows Client stops working. The problem is InPageCoFire Error Status Code: c000009c
  So I try to use SystemRestore for her. But the same thing happens.
  I hope you can try to help me...
  -Kirstinkaye

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been postponed until February 26, 2010, so move on! Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Problems with Windows Update on Vista SP1 32 - bit Error: 0x8007000D

  Two updates have been failing install for me for several weeks. I finally decided to try to understand what is happening, and I'm stumped at this point.

  The updates are:
  Update cumulative security for Internet Explorer for Windows Vista (KB969897)
  Internet Explorer 8 for Windows Vista

  These two with an error code of 0x8007000D

  I tried almost everything I can think of, scanned for virus/malware, scandisk, verification of the SFC, several difficulty different sound of Microsoft, I even cleared out / reset Windows Update with several different methods and has run the system preparation tool.

  Then, I tried to install Vista Service Pack 2, perhaps thinking that might help - would not install either.

  The ie8_main.log contains the following:

  00:00.249: started: 2009/07/21 (A, M, J) 22:15:46.875 (local)
  00:00.281: time Format in this newspaper: MM:ss.mmm (minutes: seconds.milliseconds)
  00:00.312: command line: 'C:\Windows\SoftwareDistribution\Download\Install\wuiesetup_prereq.exe' /wu
  00:00.468: INFO: checking for C:\Windows\SoftwareDistribution\Download\Install\wuiesetup_prereq.exe version: 8.0.6001.18702
  00:00.561: INFO: Package Installer Mutex acquisition
  00:00.593: INFO: operating system: Windows Workstation: 6.0.6001 (SP1)
  00:00.593: INFO: Vista the operating system detected. Service pack major: 1, minor SP: 0, name of Service pack: Service Pack 1
  00:00.608: INFO: check if you have installed the battery update service
  "00:00.608: INFO: SSU version regvalue found: ' 6.0.6002.18005.
  00:00.624: INFO: Servicing stack update found. Permanent installation
  00:00.624: INFO: check the prerequisites
  00:00.639: INFO: met prerequisites: Yes
  00:00.639: INFO: checking for C:\Program may Explorer\iexplore.exe version: 7.0.6001.18000
  00:00.655: INFO: C:\Program may Explorer\iexplore.exe version: 7.0.6001.18000
  00:00.671: INFO: check if s iexplore.exe version current is between 8.0.6001.0...
  00:00.671: INFO:... .and 8.1.0.0...
  00:00.686: INFO: version Maximum on which to run IEAK branding is: 8.1.0.0...
  00:00.686: INFO: success check iexplore.exe version. Proceed with the installation.
  00:00.702: INFO: checking for C:\Program may Explorer\iexplore.exe version: 7.0.6001.18000
  00:00.702: INFO: version for C:\Windows\system32\mshtml.dll check: 7.0.6001.18183
  00:00.717: INFO: version for C:\Windows\system32\wininet.dll check: 7.0.6001.18148
  00:11.481: INFO: EULA accepted
  00:11.497: INFO: user successfully completed the scenario WU. Exit with return code 322376503 so WU will install IE8
  00:11.497: INFO: install return value: HR = 0 x 13371337
  00:11.513: ERROR: installation exit code: 0 x 13371337 (Undefined error Code).

  and the CheckSUR.log file contains the following:

  =================================
  Preparation of control system was updated.
  Binary version 6.0.6001.22375
  Package, Version 5.0
  2009-07-21 20:03

  Checking deployment Packages

  Audit of manifest Package and catalogs.

  Checking package watchlist.

  Control of component watchlist.
  (f) CBS registry 0x8007000D Package_1_for_KB944533 error ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.1.944533 - 4_RTM_neutral_GDR enumeration child package failed, index: 9

  Verification of the packets.

  Control components store

  I tried to remove the KB944533 and get an error. I have also tried to install a copy of the KB944533 but told me that it wasn't the version appropriate for my version of Windows.

  I am at a loss and no longer know what to check. I guess that there is a corruption in the registry (or system files) associated with KB944533, but I can't figure out how to get the installation routines for give me more detailed information.

  Any help would be greatly appreciated. While my PC is functional and I have no other problems with it, I would like to be able to try IE8 at a given time.

  Thank you
  -Al

  Success!

  I finally understood what was going on. This is a damaged registry entry.

  The registry entry for the key:
  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Component based Servicing\ComponentDetect\x86_microsoft-windows-ie-setup-support_31bf3856ad364e35_0.0.0.0_none_e9aaaad1a6a385a4

  content, which was supposed to be a string value entry for:
  Package_1_for_KB944533 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.1.944533 - 4_RTM_neutral_GDR

  Unfortunately, it was not of type "REG_SZ" but altered with a type of
  0 x 40000001, which was identified as a binary key.

  I could not initially remove/change the key, therefore, found some instructions on how to reset the permissions on your registry using a Microsoft tool called: subinacl

  After the race I could rename the bad registry entry and add it back in manually, by giving the appropriate string value.

  Now, I was able to install IE8, so I think everything is resolved. Going to update to Service Pack 2 for Vista soon.

• I tried with windows update and manually to download vista service pack 2, but these two don't

  I tried with windows update and manually download vistal SP2 but fails both: the process takes time and when download reaches 100% there is a message that says that the file is corrupted in the disk, I tried to check readers for bad mistakes, too, but the same problem persists.

  It may be a corrupted catalog file.  However, it can also be a corrupted system file.  In the latter case, the System File Checker may be able to fix it.  Click Start, type "cmd" in the search/Run box and right-click on the CMD icon at the top of the results pane.  Select run as administrator.  When the cmd window type "sfc/scannow" at the prompt and press ENTER.  When the scan is finished, close the cmd window.  Alternatively, you can try to install clean or safe mode boot mode.  See

  http://support.Microsoft.com/kb/331796

  The procedure should work the same for Windows 7 and Vista.

  Enter the Mode safe mode by starting the cold computer and pressing the key function F8 repeatedly as soon as the manufacturer splash screen appears.

• The problem with Windows update - automatic updates service won't start not (error 126)

  original title: the problem with Windows update

  Please help me to get Windows Update operational return.

  XP Media Center Edition, Version 2002, SP3

  Had a problem with "Generic host process for Win32 has encountered a problem and needs to close."  Follow-up of the instructions on this link:
  http://support.Microsoft.com/kb/931852

  Seems to have cleared the error message.  So far so good.

  However, now a Windows Update does not work.  Security Center Windows were told to go to control panel > system and use the Automatic Updates tab.  But, if I go to control panel > system, the Automatic Updates tab does not appear.

  I also went to the control panel > Services.  Tried to start the automatic updates service.  Received this error message: could not start the service automatic updates on Local computer.  Error 126: The specified module could not be found

  I already followed several instructions on this subject:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/cannot-access-Windows-automatic-update-after/aeaec175-01f4-47ed-8F97-55b854af4220

  In the thread above, I was following the post on 30 August.  According to Option A, I completed step 5 for the uninstallation of McAfee Security.  At this time, my network card has stopped working.  On the recommendation of the officer, I posted to the Malwarebytes forum.  The officer determined Malwarebytes that I don't have a malicious software.  I ended up posting on forum McAfee to get my network card works again.  Then I reinstalled McAfee and start to run Windows Update.

  I started with Option A, step 8 to reset Internet Explorer using http://support.microsoft.com/kb/923737.  The difficulty it has worked very well.

  Then Option A, step 9 says reset Windows Update using http://support.microsoft.com/kb/971058.  When I ran the difficulty in default or aggressive mode, I got an error message saying: he cannot start wuauserv.  The message asks me to verify that the user has privileges to take this step.  Well, I checked through user accounts who am the only one user set up on this PC and I have administrator privileges.  Help me please run this difficulty or recommend another way to get Windows Update works again.

  [1]... looks like you are saying that my system is so wet that a clean install is the (only?) way to go.

  [2] if I do a clean install, not only what I need to reinstall Windows and all my applications, I also have to reinstall the drivers... Etc. ?

  [3] I think I have the disks supplied with the PC system. Is it better to use than to use the recovery partitiion?

  [4A]... is there a possibility that some of [my data are] infected?

  [4] preventing me from simply infect the whole PC again?

  A1. Yes, and it was my recommendation in August, too.

  A2. Yes.

  A3. Only not really well using the restore Partition hidden to make the "destructive recovery" will include all drivers, etc., that have been installed at the factory.

  A4a. Yes, a real possibility.

  A4b. You run at least three 3 tests on the backup data before restoring one (1) with your installed & updated up-to-date anti-virus application (for example, Microsoft Security Essentials) and two 2 with good reputation, free online scans (e.g., ESET;) Bit Defender; Kaspersky; HouseCall; (F - Secure).

  If you have saved your data on CD/DVD, the disc scanner. If you have backed up your data to a flash drive, SD card, or another external drive AND KB971029 is installed, analyze the drive.

  If you have any questions or need additional help, please start a new thread in this forum: http://answers.microsoft.com/en-us/windows/forum/windows_xp-system

  Once again, good luck!