Problems with Windows Update! ("some settings are managed by your system administrator"?)

Similar Questions

• Unable to access windows update settings, message, some settings are managed by your system administrator. »

  Original title: unable to automatically update important updates.

  There is no error message when I open Control Panel > system and security > Windows Update > change settings.

  On this page, that I can't even select or choose other important updates options.

  In addition, on top of the same page, there is information highlighted: "some settings are managed by your system administrator."

  However, I have a personal laptop at home and use the laptop as administrator.

  I already tried troubleshooting, but it was useless for this problem.

  Hi Said,

  It seems that you use Windows 8. You will not be able to access the Group Policy Editor (gpedit.msc) If you use Windows 8. Group Policy Editor can have access on Windows 8 Pro/Enterprise edition of Windows 8.

  Have you tried the other suggestions contained in my previous post? security software i.e. un-installing third if installed computer and to access the windows update settings by enabling the built-in Windows administrator account.

  If you have tried the steps above, please answer us with results to help you further.

• Try to activate Vista's problem reports, but get the message "Windows incident reports are disabled." and some settings are managed by your system administrator

  Original title: trying to activate the Vist problem reports, but get message "Windows problem reports are disabled."

  "Windows problem report is disabled." I can't activate the problem reports and Solutions on my Windows Vista computer.  When I click on "Change settings", I would be prompted with the following message if poster "some settings are managed by your system administrator."  It's personal PC at home.  I don't know how to activate it.  I already went to political group & register to adjust some settings.  But still unable to activate this.

  All settings are disabled as this.

  This problem only recently.

  Method 1

  System Restore does not work.

  Method 2

  Disable the antivirus software does not work.

  But after some research, I realized that the problem could be due to a recent installation of a PC anti-frustration software called Soluto (the star was "Activate Crash Handler Soluto").  It worked after that.  After uninstalling, I rebooted the PC system.  After the reboot, I checked the reports on the problems and Solutions and found I could now adjust advanced settings.  I have also reinstalled the software, Soluto and ensured that this time, "activate Crash Handler Soluto" not was not checked (i.e. enabled).

• some settings are managed by your system administrator (I am the only administratot and owner how can I stop a person controlling my computor location)

  I get a message (somesettings are managed by your system administrator). I am the administrator owner i.e. Head boy, top dog. How someone can be control my computor all the best Roy Barton

  How or when you receive this message?

  What is the EXACT TEXT of the message?
  Belongs to your PC to a network or domain?
  What version of XP you - run Home, Pro, or MCE?
  What kind of profile do you use normally - administrative or regular user with limited rights. For examples, see:
  
  http://www.windowsnetworking.com/IMG/gif_wxp/wxphusr1.gif

• Some settings are managed by your system administrator.

  Hey, Microsoft.

  I have a problem here, perhaps a picture would help diagnose the problem better. (I had to say I tried almost everything I found with related topics)

  To be more precise: I downloaded Fixit to solve my bluetooth problem, solved bluetooth but eventually this broken setting. The fixit has been MicrosoftFixit.Devices.Run.exe

  

  Discussions were merged.

  Deleted duplicate.

  Hi Derek,.

  Thanks for the reply.

  I am happy to know that your question crept with your own efforts.

  Feel free to write us if you encounter problems with Windows.

• I use vista home premium.i am the only user. In windows update, change the settings, I noticed information as "some settings are managed by your system administrator" under updates important, I can not access or change the settings.

  recently, I tried to change the reg key by going to "HKEY_LOCAL_MACHINE\SOFTWARE\POLICIES\MICROSOFT\WINDOWS\WINDOWS UPDATE\AU" in the right panel, I changed my reg AUoptions value to 0.

  I'm using norton 360 (ver 2.5.0.5) .no other norton is installed.my subscription will be emds after 865 days.
  
  UH - huh. You have 2¼ ~ years remaining on an N360 2009 subscription. I see.

  In this case, the Symantec Support should be able to help you eliminate the hijackware infection which is causing your problem.

  Good luck!

• When I open gadgets why it show-Desktop gadgest are managed by your system administratir

  When I open gadgets why it show-Desktop gadgest are managed by your system administrator

  Hello

  This probably means that a system administrator has used group policy to disable the desktop gadgets and prevent users from installing new gadgets. If you use a company computer that this may have been done in response to Microsoft is retiring from Google desktop gadgets platform initially because of security concerns.

  You will need to contact who has administrative privileges on your computer if you want to re - turn on the desktop gadgets.

• The problem with Windows update - automatic updates service won't start not (error 126)

  original title: the problem with Windows update

  Please help me to get Windows Update operational return.

  XP Media Center Edition, Version 2002, SP3

  Had a problem with "Generic host process for Win32 has encountered a problem and needs to close."  Follow-up of the instructions on this link:
  http://support.Microsoft.com/kb/931852

  Seems to have cleared the error message.  So far so good.

  However, now a Windows Update does not work.  Security Center Windows were told to go to control panel > system and use the Automatic Updates tab.  But, if I go to control panel > system, the Automatic Updates tab does not appear.

  I also went to the control panel > Services.  Tried to start the automatic updates service.  Received this error message: could not start the service automatic updates on Local computer.  Error 126: The specified module could not be found

  I already followed several instructions on this subject:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/cannot-access-Windows-automatic-update-after/aeaec175-01f4-47ed-8F97-55b854af4220

  In the thread above, I was following the post on 30 August.  According to Option A, I completed step 5 for the uninstallation of McAfee Security.  At this time, my network card has stopped working.  On the recommendation of the officer, I posted to the Malwarebytes forum.  The officer determined Malwarebytes that I don't have a malicious software.  I ended up posting on forum McAfee to get my network card works again.  Then I reinstalled McAfee and start to run Windows Update.

  I started with Option A, step 8 to reset Internet Explorer using http://support.microsoft.com/kb/923737.  The difficulty it has worked very well.

  Then Option A, step 9 says reset Windows Update using http://support.microsoft.com/kb/971058.  When I ran the difficulty in default or aggressive mode, I got an error message saying: he cannot start wuauserv.  The message asks me to verify that the user has privileges to take this step.  Well, I checked through user accounts who am the only one user set up on this PC and I have administrator privileges.  Help me please run this difficulty or recommend another way to get Windows Update works again.

  [1]... looks like you are saying that my system is so wet that a clean install is the (only?) way to go.

  [2] if I do a clean install, not only what I need to reinstall Windows and all my applications, I also have to reinstall the drivers... Etc. ?

  [3] I think I have the disks supplied with the PC system. Is it better to use than to use the recovery partitiion?

  [4A]... is there a possibility that some of [my data are] infected?

  [4] preventing me from simply infect the whole PC again?

  A1. Yes, and it was my recommendation in August, too.

  A2. Yes.

  A3. Only not really well using the restore Partition hidden to make the "destructive recovery" will include all drivers, etc., that have been installed at the factory.

  A4a. Yes, a real possibility.

  A4b. You run at least three 3 tests on the backup data before restoring one (1) with your installed & updated up-to-date anti-virus application (for example, Microsoft Security Essentials) and two 2 with good reputation, free online scans (e.g., ESET;) Bit Defender; Kaspersky; HouseCall; (F - Secure).

  If you have saved your data on CD/DVD, the disc scanner. If you have backed up your data to a flash drive, SD card, or another external drive AND KB971029 is installed, analyze the drive.

  If you have any questions or need additional help, please start a new thread in this forum: http://answers.microsoft.com/en-us/windows/forum/windows_xp-system

  Once again, good luck!

• I have problem with windows update

  I have problem with windows update

  and I can't find the Hebrew pack in windows update?

  I have windows 7 ultimate

  You use this procedure: http://support.microsoft.com/kb/972813 ?

  Hebrew should be available, see: http://windows.microsoft.com/en-GB/windows7/products/features/language-packs .

  All the answers and suggestions are provided by an enthusiastic amateur and are therefore no explicit or implicit guarantee. Basically, you use my suggestions at your own risk.

• Problem with Windows Update after the removal of Virus

  My operating system is Win Vista 32 bit, had some virus closed my windows updates, have a view of the white page. Checked that my services and win update is in automatic mode has started, so I don't know why my updater gives me a red x saying windows updater is turned off.  Any suggestions?

  [Original title: Windows Update]

  https://answers.Microsoft.com/en-us/protect/Forum/protect_other-protect_scanning/problem-with-Windows-Update-after-removing-virus/3a8dd279-2732-4693-88bf-f5cea4afca96>

  It makes more sense. How to reset the Windows Update components?

  Yet, as indicated in The ball , the search results links do not work. I also used several browsers and DuckDuckGo. Maybe it's because the Windows Update Agent was changed some time ago and the article is no longer valid.

  EDIT: If the OP is also struggling to access the link I suggest using repair Windows updates available from tweaking.com. I suggest also using the Registry backup of the same author before hand.

  Repair the Windows updates

  http://www.tweaking.com/content/page/repair_windows_updates.html

  Registry backup
  http://www.tweaking.com/content/page/registry_backup.html

  I hope this helps.

• problems with windows update, HP Pavilion, M9077c PC, computer locked up, said incorrect password

  The current problems with Windows update.  My son; computer s, Auto update has not ended.   Got a new set of updated the following day.  He locks up computer because now I get incorrect password message.    Discs to reboot I did before are not recognized.   All solutions?

  Hello

  I suggest you to try the steps in the following Microsoft article and check if this may help.

  How to use the system restore to log on Windows 7 or Windows Vista when you lose access to an account: http://support.microsoft.com/kb/940765/en-us

  For more information, see the following Microsoft article:

  http://support.Microsoft.com/kb/189126

  Hope the information is useful.

• Problems with Windows Update after uninstalling SP2 (Vista Home Premium)

  Hello, everyone!

  Two days ago, I tried to install SP2 through my Windows Update. During the installation and then restart, it stopped on step 3 (0%), ignored and open Windows normally. But, I realized that I had totally lost Aero (I didn't even have the option in the window color and appearance), and also Windows Update constantly gave me the message that I always important updates - SP2 has not installed correctly (I rebooted the computer several times to try to resolve this problem, but everything remained the same: stop on step 3) ", running Windows, and once again the message that I've updated important). I searched in various forums, but could not solve the problem, so I decided to uninstall SP2 via Control Panel. But it doesn't let me do that - whenever I clicked on the button uninstall, it says that the installation is not finished yet. So, I tried the system restore, but whenever I clicked it, an error message (that I didn't understand at all) appeared. So, I went into safe mode and tried the system restore and it worked (Control Panel uninstall option does not in Mode safe either), and everything is back to SP1. But now I have problems with Windows Update - I get the error message 0 x 8007002 (and even 0 x 8007005 several times). I tried everything I could find in the forums (the thing with automated updates service does not because I don't have this option in Services), but nothing works. If anyone has any advice whatsoever, I would be really grateful for that, because I don't know what to do.

  For safety, I use NOD32 anti virus, Tall Emu Online Armor and ThreatFire.

  Thank you very much!

  Hi EvanaZgb,
  Thank you for visiting the Microsoft Answers forum.

  I would say to first disable the anti virus and other security software. Then proceed as follows:

  STEP 1
  ------------
  Download and install the latest version of Windows Installer
  To install the latest Windows Installer, visit the Microsoft Web site at the following address:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  Step 2 now try to update again and post back with the results
  ------------
  Cleanup, utility to download and install the Microsoft Windows CleanUp utility. To do this, see the Microsoft Web site: http://download.microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe

  Now try to update again and post back with results

  Thank you

  Martin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Im having a problem with windows update.

  Im having a problem with windows update. I am running windows vista.seems as it downloads the updates, but when he tries to install I have three different error codes.  80200053 80070570 - FFFFFFFE.  Help.

  The FFFFFFFE error can mean that you have a rootkit. And its blocking updates

  Download tdsskiller run it, everything it found, select cure and then restart your computer. Then try again

• Problem with Windows Update after the new installation of Windows 7 Pro the Lenovo ThinkPad X 200

  I'm trying to do a fresh install of Windows 7 Pro on a Lenovo ThinkPad X 200. The product key is easy to find on the sticker of the ThinkPad. However, the version of Windows is hidden (for example, I can't check that my ThinkPad had originally installed Windows 7 Pro). I was able to install by using a Pro Win 7 SP1 CD ROM I bought for another installation. I used the ThinkPad I was trying to make the new facility on the product key. I was able to activate the Windows 7 Pro using the phone call and my cell phone. I checked the activation! However, I have problems with Windows update. The product key may be a different version of Windows 7. If so, why did it install and activate OK? Y at - it a fix for this problem or I have to buy a new version of Windows 7 Pro? Please note that I have not yet installed all drivers Lenovo ThinkPad as I can't seem to install correctly. Thank you!

  Since the issue is updated to Windows, it is not a product number key.

  You can reset the Windows Update components by running the Fixit on this page. But if there is malware present, she will continue to reset the connection to the update servers:

  How to reset the Windows Update components

  http://support.Microsoft.com/kb/971058

  Suggest you download and save the Fixit. Then configure the system before the clean boot by running:

  How to troubleshoot a problem by performing a clean boot in Windows Vista/Windows 7

  http://support.Microsoft.com/kb/929135

  Once the Fixit has been downloaded and the system is started in the pure State, check that the native Windows Firewall is now on if a 3rd party firewall has been used previously. Now run the Fixit and choose the default mode. Restart once it's done and see if the system can be connected to the update servers. If he can't, then rerun the Fixit and choose aggressive mode. Turn it back on when he finished the race and updates.

• problem with windows update - said failure to configure updates changes in recovery

  Original title: problem with windows update

  computer says failure to configure updates changes in recovery but when you check the update history, he said updates succeeded, but one of them failed its been happening every time I turn on my computer went thrus my updates or not has them and if I update my computer will fix the problem

  Hello

  Thanks for the reply.

  Have you checked by installing the update manually?

  Send more information on the update failed, code number and update KB message.

  • Press the Windows and X keys simultaneously.
  • Click on Control Panel, then click on Windows Update.
  • Click view update history.
  • Double-click the update.