CS3 "failed virtual memory"?

Similar Questions

• Photoshop CS3 is not enough virtual memory

  My photoshop program won't let me even open a file now without busting a message saying it's not enough virtual memory. I tried to change the amount of RAM, it offers access too, but it does not help. It does not seem to count how many things I opened.

  Try to change or add to the "scratch disks" Photoshop has access too. Its in the preferences under the edit menu, probably in the performance category, although I don't remember CS3 very well these days.

  Terri

• Virtual memory low = off Premiere CS3

  Thought I would try here first rather than the other Board of Premiere Pro all.  Here's what happens:

  1. I don't have ANY other application running on my computer, other than the basic system and antivirus stuff.

  2. when I open the first, I can take both followed a slow delay action.

  3. after the 5th action or so, I get the message "your system runs on low virtual memory.

  4. I've already paid my VM.  I updated recently both initial and Custom 3500 MB. I have 35K MB available. Can I go higher than that? What are the parameters of others?

  5. I have check the processor in the Task Manager and first runs at about 650, 000 K. Is this normal?

  5. then, the software stops. Bloop.

  Thank you in advance for your advice/comments/help.

  CS3 has been known to memory leaks, but the updates have resolved that. So the first question is, you have the latest updates?

  Dell laptops computers are well known (not only Dell, but more brands non-Sager) for their missing disk i/o. You need at least two SATA (7200 RPM) drives according to the minimum requirements and more for comfortable editing. Virtual memory is quite low considering only 2 GB of RAM. Defragmenting your drive and use the optimization of startup to defragment the file of the page as well.

  What type of material you are editing, what codec?

• KB973687 - msxml3.dll msxml6.dll - services.exe uses excessive virtual memory, the performance impact on the first logon after restart

  Since the installation of fix KB973687, I had several SP2 and SP3 systems exhibit behavior that makes them unusable until after the first logon is completed, which can take up to 20 minutes.   I've identified the patch (KB973687) and DLLs, that it will update the origin of the problem, but uninstalling the patch does NOT return to normal operation.

  I need to understand how to upgrade these systems WindowsXP SP2 and SP3 to restore normal operation, reinstalling Windows, programs, and settings is an expensive solution.

  The performance problem is caused by services.exe slowly consumes about 1.5 GB of virtual memory, and then slowly releasing.  This seems to be triggered by the first logon after restart, this connection is very slow, the screen is blank for most of it, there might be failures of allocation memory during logon.  Once complete this opening of session and memory usage returns to normal levels, recording and return to work normally as do other operations until the system is restarted.

  Spent a lot of time working with SysInternals Process Explorer, trying to find what specific service might be involved, lightweight system for bare essential services with no luck.

  KB973687 seems to offer only two files msxml3.dll and msxml6.dll.  Uninstalling this patch, resettlement V3 and V6 of the XML parser fail to restore normal operation.

  Not all systems seem to have place still restrict the differences.  Systems that are appear to be the oldest, with Windows XP has been installed for at least a year, installed Microsoft Office and Adobe Acrobat.

  Looking for these forums and the Internet, I believe that many have encountered this problem, but have not is it this level of analysis, seem most attribute it to a virus, I see several start explorer.exe manually, I didn't know all the alternatives before reinstalling Windows.

  Found the solution, the following has been fixed in System Cleaner of Comodo 2.2.129172.4:

  "For some strange reason, after changing some settings of the system with the CSC LastGood.tmp Directoy began to constantly be read from my hard drive. This would occur up to about 90 to 99% of my memory was used and then stopped, begin to free the memory, and the system began to slowly to function normally.
  I used the process explore from sysinternals to help diagnose the problem with any process other than services.exe using memory.

  I used sysinterals filemonitor to see LastGood.tmp directory has been read repeatedly.
  After you have uninstalled CSC the problem has been resolved. »

  Even with the effort to find the solution, it was better to reinstall.  Hope this solution helps others.

• Virtual memory - recording is not Windows 7.

  Hey all, I have a toshiba Satellite a300d with 2 GB of ram and a processor cpu 2.10,.
  I installed windows 7 on my drive external hard usb, works smoothly until I want to play games, I remember useless errors poping up etc.
  Whenever my laptop boot... displays the virtual memory window and the affected memory paging will be always 0, digitized time I tried the managed system configuration, restart, only it does not save the settings I assigned to the.
  I tried the " sc config afs start = disabled" command but alll I get is:
  "C:\Windows\system32>sc config start = disabled afs.
  [SC] OpenService FAILED 1060:

  The specified service does not exist as an installed service. »

  Can someone help me solve this problem? I went through 100's of discussions on this subject, but can find no answers.

  Hello

  As services are corrupted, you can perform in-Place Upgrade (repair install) and check.
  The detailed procedure is suggested in the following link.

  
  How to perform an upgrade on the spot on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2

  http://support.Microsoft.com/kb/2255099

  Warning: Before you perform an upgrade in-place, you must be prepared for the worst scenarios that led to your existing data on your computer being deleted. These data include data personal, settings, information about the hardware and software drivers. In case of a worst case scenario, you may have to reinstall all the programs. Make sure that you back up personal data to disks or other external storage devices before performing an upgrade on the spot.

  I hope this helps.

• Kernal_task with virtual memory, slow computer

  I have an iMac 21.5 inch end 2013 with 8 GB RAM on OS X 10.11.6. The computer is incredibly slow and hangs up during long periods of time (minutes). In addition, I noticed when you save to my Time Capsule (ethernet connection, wifi is turned off) it will just make a break to half way through and stay there (e.g., 789 MB 450MO) for 30-45 min. activity monitor shows kernal_task taking up huge amounts of time processor (5:02:09), son (118), slow down wake ups (2752), and when I select the process name it shows the size of real but 781,2 MB of memory the size of the virtual memory of 70,51 Go.

  I don't have any external monitors, hard drives (except the time capsule), etc. connected. Any ideas of what I can do?

  Thank you!

  Please after the release of EtreCheck

  <https://discussions.apple.com/docs/DOC-6174> or <http://etrecheck.com>

• Satellite 1100: Excel keeps freezing - too low virtual memory

  I have a satellite 1100. My Microsort Excel program keeps freezing (mainly when I print or you are trying to save) and then tells me to stop.

  So, I also have a message icon telling me that I am low on virtual memory. Microsoft stop related to memory being low?

  How can I increase the memory? Or do I just need a new laptop! Help, please.

  Hello

  Satellite 1100 is really an old classic, but he should be able to use common desktop applications such as Word or Excel with no problems
  Virtual memory also known under the name a paging file is a file on your disk (default C:\pagefile.sys) than Windows applications and use more physical memory (RAM) according to your needs. The default and the recommended of pagefile.sys size is 1.5 times the amount of physical memory. Virtual memory is the amount of physical memory and the pagefile. So, if your computer has 512 MB of RAM, there is a page file 768 MB by default, for a total of 1.25 GB of physical + virtual memory.

  So what to do in your case? Generally, the RAM upgrade should solve this problem. You can also try to increase the size of the pagefile.sys.
  This can be done in system-> tab advanced properties-> Performance settings-> advanced-> virtual memory change tab.

  After the change of virtual memory, you have to restart the laptop again.
  If this will not help then an upgrade of RAM would be required or a new laptop effective ;)

• Satellite Pro L40 - Vista display lack of virtual memory message

  Hello

  new here on this forum, hope someone can help,

  I have a series of satellite Pro L40, I'm trying to free up memory space I get the prompt "virtual memory is low", Vista (c) shows 3.28 GB free of 37.2 GB & data (E :) shows 100% free, I just replced both modules of memory with x 2 1 GB 200 pin Sodimm memory upgrades but Vista is still to display only 3.28 GB of free space) , any idea?

  Your very confused!, Mike.

  Hi Mike,.

  I think you mixed a lot of The RAM (Random Access Memory) has * nothing * to do with disk space von Vista (c).
  Vista with low disk space partition is stored on the HARD disk and the second partition (E :) as well.
  RAM and HARD drive are completely different. All your data/files are stored on the HARD drive because the RAM is no place to save the data.

  In any case, I think you need to move some files from partition C: to E: partition like photos, music, etc. Then, you can get rid of this error message.

  I think that this document could be useful for you:
  http://APS2.toshiba-tro.de/KB0/TSB7101OB0006R01.htm

• How to change the maximum virtual memory

  Hi, I use a laptop 1.8 GHz, 512 MB of tevra m2.
  normally used for office work and not for games,
  BitDefender Antivirus consumes a lot of memory, so be careful about the use of memory.
  so I was wondering if anyone knows how to set up the best of 'virtual memory': min and max: about 1.5 to 2 times the size of RAM?
  Thanks in advance

  Hello

  Please go to:

  Properties - "Advanced" tab - control panel in the button 'Edit' performance zone - tab "Advanced"

  You will find the virtual memory settings.
  I recommend you set the settings of "size of system managed". In this case the OS will control the value automatically.

• My hard drive and the Extras have plenty of space. Yet several times each and every day, I'm getting flashed "virtual memory minimum insufficient..." Virtual memory pagefile... "Any joy? Please help if you can. Thank you. Cecilia.

  Question

  I have another type of problem with Firefox

  Description

  My hard drive and the Extras have plenty of space. Yet several times each and every day, I'm getting flashed "virtual memory minimum insufficient..." Virtual memory pagefile... "Any joy? Please help if you can. Thank you. Cecilia.

  This has happened

  Each time Firefox opened

  Only a few weeks ago, (tried everything)

  Troubleshooting information

  ?

  Version of Firefox

  3.6.3

  Operating system

  Windows XP

  User Agent

  Mozilla/5.0 (Windows; U; Windows NT 5.1; en - us; RV:1.9.2.3) Gecko/20100401 Firefox/3.6.3 (.NET CLR 3.5.30729)

  Plugins installed

  • -Adobe PDF plugin for Firefox and Netscape
  • Default plugin
  • Shockwave Flash 10.0 r45
  • Windows Presentation Foundation (WPF) plugin for Mozilla browsers
  • Java plug-in 1.6.0_07 for Netscape Navigator (DLL Helper)
  • Npdsplay dll
  • DRM Netscape Plugin store
  • DRM Netscape Object network

  Read about virtual memory here: http://www.ehow.com/windows-xp-virtual-memory/

• Tecra m2V faced with applications. Need to change the virtual memory?

  I have a Tecra M2V under XP. I've been experiancing slowdowns in all of my running applications. I have cleaned the readers of PC, defragmented etc but there seems to be no change.

  What is virtual memory? If so, how can I solve them?

  If this isn't the case, is to do with XP - I mean with each XP update that we had there at - it something like the BIOS settings that need to be updated?

  TIA

  The

  Hello

  The Windows XP operating system use a space on the hard drive as virtual memory. This means that a file is a space on the hard disk that Windows uses as if it were RAM.
  The file size is variable and you can change the size of file in the performance Options.

  Please go to control panel - system - Advanced tab. You will find the Performance parameters.
  In the performance Options, you will find 3 tabs (Visual effects, advanced, Data Execution Prevention). On the Advanced tab, you can find the option to change the virtual memory.

  Good bye

• How to use 1 GB SD-Card as virtual memory?

  Had the brilliant idea to use my SD card of 1 GB of virtual memory.
  This gives a new impetus and speed up things in the ir, it's just a "idea light and nothing on boost.
  Thanks for the info

  Did you mean paging?
  You can do something like that on the HARD drive but I don't think it's possible with the SD card.
  Virtual memory, you can set in the Advanced memory virtual System Properties Advanced performance options

  The virtual memory size can be defined on each HARD disk or partition

• Equium A60: message error "virtual memory is low.

  my daughter has a Toshiba Equium A60 for over a year (now off warranty of course) and had error messages saying that its virtual memory is low. This happens almost every time that she uses his computer now and it cannot open any of its requests at the moment.
  any ideas out there?
  She cannot renew his subscription of McAfee online because she can't keep usable enough long to do anything. grateful for any advice.

  Thank you

  the main problem is that it is in a House of the student with 3 others and sounds me for the computer - a mother no-tech tips!

  Hello

  Unless you are an experienced user, you should allow Windows to manage this setting for you. Your problem may occur if the default settings have been changed somehow. First to diagnose your problem, you must follow these steps to ensure that Windows runs properly your virtual memory settings.

  1. find out how virtual memory is managed. Right click on 'My Computer' and choose 'properties '. Click the Advanced tab, and then under Performance click settings.
  2. which opens your performance Options. Click the Advanced tab. For private users 'typical' Processor Scheduling & Memory use must be set to "programs".
  3. under virtual memory, click change.
  4. which opens the virtual memory options. If you have more than one hard drive, make sure that your primary hard drive is selected under "Drive".
  5. under "Paging File Size for selected device" check the box indicating the size of the managed system.
  6. click OK in all the 3 boxes to close off these settings and restart your computer

  Good bye

• Settings for virtual memory for Qosmio X 505-8104 X

  Hello group,
  What is the best setting of virtual memory for general use for a x 505-8104 x with the hybrid c drive?

  Hi steilacoom.

  Best option is if Windows manage size of pagefile for all readers. Windows automatically sets the best size of swap file and you don t have to do anything.

  So just check the option automatically manage paging file for all readers size and get you the best performance and don t have any problems with the pagefile.

• Help - my virtual memory is full and I can't fix it

  Hello

  Last week my mac started saying "the applications memory is full" and detective work showed me my virtual memory is full.

  I have used Clean my Mac 3, but that did not help (he removed a lot of junk to computer, but still the same problem of memory)

  I'm not technical interest but have tried some things and not having any success.

  Any tips?

  Basically, he did my livelihood Imac all gel, so it becomes impossible to work. (Can't even type this her - do for my laptop).

  I'd just better take it to a genius bar or it's something that I can solve with the help of you good people?

  You must free up space, delete apps that you don't use

  delete old photos, perhaps after saving them remove old video clip...