CS4 compatible with snow leopard?

Similar Questions

• Is CS4 after effects of Master Collection Compatible with Snow Leopard 10.6.8?

  Hello Gang

  I've seen different views on the compatibility of the products of the CS4 Suite in 10.6.8 Snow Leopard.

  Does anyone know if CS4, After Effects , of the "Master Collection" is compatible with Snow Leopard 10.6.8?

  Thank you

  Just click the link and scroll down to CS4.  It does not support 10.6.8.

• Is updated to V1.1.00.20 D6200 firmware compatible with Snow Leopard (OS 10.6.8)?

  Before updating the firmware, is the firmware upgrade compatible with Snow Leopard (OS 10.6.8) V1.1.00.20 D620 and there are problems of people had at the time?

  We're already having routing problems (the line is ok, but wifi creates connection problems, loss of packages and huge lag) so I don't want to upgrade my computer will not be able to enter the router system, otherwise it will mess up things more far.

  Hello Shemja

  Yes, you'll be well updated the firmware, it should not affect connection to the modem.

  DarrenM

• What Creative cloud compatible with Snow Leopard?

  Hello is creative cloud is compatible with Snow Leopard?

  Hello

  Please see the below Document:-system requirements | Cloud Creative

• Why my Photoshop CS4 crashes with Snow Leopard!

  To get my machine to work faster, an employee of the apple store said I should update to snow leopard and get more RAM.

  Update of Snow Leopard - done.  version 10.6.2

  RAM - ordered more than crucial 2 GB, not yet installed.

  Material:

  Model name: iMac

  Model identifier: iMac8, 1

  Processor name: Intel Core 2 Duo

  Processor speed: 3, 06Ghz

  Number of processors: 1

  Total number of cores: 2

  L2 Cache: 6 MB

  Memory: 2 GB

  Bus speed: 1.07 GHz

  Boot ROM version: IM81.00C1.B00

  Version of the SCM (System): 1.30f1

  Software:

  Photoshop CS4 11.0.1

  Since the upgrade, I got accident after accident in photoshop and bridge.  Other time PS freezes and I have to force quit.  My tools do not work correctly.  Accidents happen so often and it is difficult to say what / if any particular sequence of events do occur.  I can only work in PS for a few minutes before an accident occurs somewhere between 0 and 12 minutes usually.  (embarrassing because I'm a designer of wedding album, PS is is my only way to do my job.)

  Some examples of common problems are:

  -my free transform tool gives an error saying that it can't run because of a program error.

  -My shortcuts are block when you try to use them to change between the tools, especially when you use the zoom tool or the brushes

  -marquis tool does not appear when I make a selection

  -images do not open when I drag or double-click them to the bridge in PS

  -After registration and closing of an image PS unresponsive and requires a force quite

  -my last accident was PS just left without any warning, everything disappeared and the accident report appeared, I just press Ctrl + s to save it when it happened.

  Things I did to try to fix:

  --also ran all updates posted on adobe and apple for the two products.

  -management of fonts: cleaned FontExplorerXPro of directories virtually essential system fonts and fonts cleaned cash in each place, I knew to go to search

  --i do not have police menlo

  -uninstalled all Adobe products (not reported, removed preference files, use Appzapper and then used the adobe uninstaller program, then all of the remaining Adobe files were thrown and trash emptied, computer restarted.) * this is the most recent during the uninstall and reinstall attempt, the first time that I just use uninstall adobe who obviously has not actually deleted the program and all files.  boring.  However, after each resettlement problems continued as if nothing had been done.

  i do not use some third-party plug-ins 3 to my knowledge (how would I know?  could they be installed without being intentionally?

  I have attached my latest crash report for this.

  I need this job.  This machine and the program were too expensive to do my life that miserable.  Especially when the upgrade has been recommended by apple. and adobe site has no major problems to report the snow leopard.  the fact that the work that would have taken four hours took me about 2 days between accidents is a pretty big problem for me.  as is the fact that I have a piece of a $3,000 in equipment on my desktop which is practically worthless at the moment.

  Help, please!

  Make sure that you delete this file com.adobe.Photoshop.plist in your user/Library/Preferences folder. Clean all the caches, then restart.

  Also click on the Adobe Photoshop CS4 file and then get info. If there is a selection in there to open using Rosetta ensure is not checked. It is not a selection to open with Rosetta but why PS tries to run in the PPC code. The Type of Code: should be X 86 (native)

  Also make sure that our FontExplorer X Pro shop does not work under Rosetta.

  When you installed 10.6 have you install Rosetta. Maybe someone else can comment on that but Rosetta is necessary for some reason any run Adobe Photoshop CS4, but I have not heard that.

• I bought CS4 - have the box etc serial # - use an IMac with Snow Leopard - went to use the bridge and a screen came saying Adobe Bridge HOme Service was interrupted to concentrate on other resources... uh, I bought this software and how can we now

  I bought CS4 - have the box etc serial # - use an IMac with Snow Leopard - went to use the bridge and a screen came saying Adobe Bridge HOme Service has been discontinued for focus on other resources... uh, I bought this software and how it can now be 'gone '? Pls help - bridge is very convenient and I paid for it!

  See here:

  Deleted Adobe Bridge Home service

• Cannot synchronize my mac with snow leopard 10.6 with my itunes on iphone

  I use MacBook with Snow Leopard, version 10.6 and sync to my iphone with itunes 6.

  For these last months, the computer commented that the itunes on the iphone was not updated and cannot sync.

  But the itunes on the iphone is the latest version. Is the obsolete software in my MacBook? What should I do?

  Operating system of your computer is obsolete. A device running iOS 9 requires Mac OS X 10.8.5 or newer for synchronization; a MacBook must have an identifier of model at least MacBook5, 1 to run a compatible operating system.

  (143247)

• Business Inkjet 1200D with Snow Leopard?

  Hello

  I have a HP Business Inkjet 1200D and want to update to Mac OS X Leopard 10.5.8 to 10.6 Snow Leopard. I have discovered so far this printer is not supported by the snow leopard or Gutenprint.

  Could someone please tell me if it will be released a printer for Business Inkjet 1200D driver that can be used with Snow Leopard?

  If so, can you estimate how long it will take until that this driver will be available?

  Thank you in advance!

  best regards mxFred

  If you use the Leopard 10.5 DVD and run the installation of the optional system, you can install the drivers of 10.5 HP and it worked for me. I don't know why HP says it is not compatible because my HP Business Inkjet 1200 works now fine with Snow Leopard.

  Message edited by Paul_H on 04/09/2009 03:31

• NAT with Snow Leopard issue

  For the poster who will say "Google is your friend", no it is not, or I wouldn't be here.

  I tried for a while now to solve the only problem I have with Snow Leopard Server.

  MySql has fallen lion and, apparently, no one knows how to use postgrl so I installed MySql and plundered with her for a few hours to get this working.  There were various other issues with Lion.  Finally, I went to Yosemite.  Hey Apple, where is the GUI?  Then at el Capitan and finally tried Sierra (no server app at all yet).

  For me, each 'step-up' taking things and running weaker than the last.

  Welcome to Snow Leopard.  I'll stick with it for a while to come.

  The only problem I have with Snow Leopard, it's that when it restarts, the NAT will not start upward.  Other than that, it does a magnificent job to maintain my home network.  I searched high and low for an answer without success.  A few posters who have addressed this problem specifically here never got a response.

  As this seems to be about three years or more, since this question was asked and it seems that some have migrated to the SLS, I was wondering if anyone has found a solution.

  As it is now, as soon as there is a need to reboot, I just disable the NAT service, restart and turn it back on.  In the case of a failure of current (longer than the inverter can maintain) or just a random crash, I have to kill the firewall and NAT then the configuration of the gateway of new service that requires fixing the various omissions and errors and I'm good to go again.

  Any help would be greatly appreciated.

  You have posted in the forum of Snow Leopard Client.  I ask that to move this post.  In the meantime, you can see the various forums about this trick:

  http://discussions.Apple.com/docs/doc-2463

• read the format exfat with snow leopard

  I can't read format exfat with snow leopard. I use to be able to with an easilely program found on google, but since I reinstale my Os, I can't find. Someone know where I can find it? Thank you very much

  exFAT, fat32 and ntfs are supported by Snow Leopard as reading only formats without 3rd party software.

  10.6. possible it's not like block size, trying to backup, then fitness.

  or copy the data to another device in another format.

• HP All in One Photosmart C7280 scan issue with Snow Leopard

  Hello

  I bought my wife a new cool Mac mini. So it comes with Snow Leopard. We use it for our activities with an HP printer all in one Photosmart C7280. Unfortunately the scanner does not work. I did the mistack to install HP driver from the HP website and read after documentation of the HP Web site (probably like all users). So I decided to completely re-installed the machine (as it was new) and follow the installation procedure for HP who, to say that the pilot is coming up with Snow Leopard. After the new re - install, so I installed 10.6.1 patches and last HP driver from the site Web Apple as mentioned in the forum. (version 2.2)

  The printer is correctly detected, but there is no way mak it work the scanner on HP procedures. The scanner is not recognized at all, and the printer configuration window is not appearing the scanning tab as it is supposed to. It seems that the scan part it does not work in one.

  We love HP printer and it will be great to see it fixed.

  My network configuration is very simple:

  -192.168.0.176 is the IP address of the HP printer with 255.255.255.0 netmask

  -192.168.0.106 is the MacMini (3.1) IP address mask subnet even

  All connected using a router D-Link (5 ports).

  Printer/scan function works perfectly on our other Mac systems that are under Leopard. I tried to install Leopard on the new mac mini, but the installation DVD that we have (10.5.4) does not start successfully on the machine. We are so stuck.

  Any help really appreciated

  Jean-Marie

  Hello

  Good news, it worked. But I think that the problem came from the D-Link router that I used. Upnp has been set to allow, and it seems he mistook the discovery of the device. I proceed to turn off and the live showed you me overdrawn the printer on the network. I installed it, and the scanner has been recognized.

  If I turned my back to Activate Upnp, the scan function is dead. Thus, it probably is a problem of compatibility between the leopard to snow and this Protocol. What is strange, is that our whole system of leopard work with upnp enable or disable.

  Anyway thanks a lot for your help!

• OfficeJet 6210 does not work with snow leopard

  My officejet 6210 worked very well on Mac OS 10.5. Now that I have snow leopard, when I try to choose my printer in system preferences, it says some software are absent, and the service program does not open. When I try, I can't print from MS Word and get the error "could not start the filter" / Library/Printers/hp/cups/filters/commandtohp.filter/Contents/MacOS/commandtohp "-operation not permitted.» Stoppage of work because the Scheduler could not run a filter".

  I installed new software/drivers on the web for Mac OS 10.6, even if the software/drivers are supposed to come with snow leopard. I tried all versions of deleting and adding the printer, restart the mac and printer, etc.

  Help! Ideas in addition to give up and go back to the old operating system or buy a new printer?

  You always had the hp for 10.5 software on your Mac.  Either uninstall or install the new software does NOT uninstall the 10.5 software correctly.

  Try this:

  Go to Applications/Hewlett Packard / click Uninstall HP
  Click on continue
  Highlight your device in the left pane
  Hold down the Ctrl and Opt Cmd and click on uninstall
  There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled)
  Click on continue and let it finish

  Restart your Mac

  Now run a software update.

  Then, remove and reinstall the printer in System Preferences, Print & Fax.

  If this does not work, install the wrong since the CD software (for 10.5 and earlier versions) and above of uninstall routine to run the extraordinary.

  After you get it to work, I would recommend against installing the HP software for your printer.  Scan by using the Capture of Image application into your Applications folder.

• PS CS4 almost unusable with snow leopard

  Installation of Snow Leopard.  Adobe ran uninstall for CS3, and then did a fresh install of CS4.  Downloaded all the updates.  When I open Photoshop, I get a constant flow of the same error message 'Could not complete your request because of a program error' screen attached.  It is pretty much unusable Photoshop.  I'm not having the same problems with Illustrator.  I work on a MacBook Pro w / 1.83 GHz Intel processor and 1.5 GB 667 Mhz memory.  If someone could help me suss the problem I would be eternally grateful.

  See you soon,.

  Bummersville

  Don't forget what I was doing was installing 10.6 on my 10.5.8 system which

  a work of CS4.  I didn't do a 10.6 clean and then install CS4.

  Have fun and good luck!

• HP Photosmart Premium c309a doesn't fully work with Snow leopard 10.6.1

  I don't see any answers in the Forum on my printer model, so here goes-

  The printer is configured for a wireless connection.

  Cannot get IPhoto to print on a photo plate, no matter how I play with the settings in the Menu print.  However, using the keypad of the printer, I can print from the photo tray color photos using a flash drive.

  IPhoto and other apps, IWork 09 and ILife 09 will print to main paper tray, but not in color.

  Using the keypad of the printer, I can copy and print from the glass in BW and color.

  Cannot use Scan function Scanpro HP or the Device Manager, but can scan and print photo tray and main tray (but no computer or a drive - error message says no link found.

  All reports - network wireless, Network Configuration, Fax, printer status, test and HP homepage, say all right.

  I used suggestions from HP website without result, and the very nice fellow HP Chat Line, Manuel, told me in English that I have to contact MicroSoft for help.   I found a Web page apparently new to Mac users (HP printing from a Macintosh 10.5) and HP Mac-connect, but they do not seem to be updated for Snow Leopard.

  I have reinstalled Snow Leopard, nothing helps.  I also tried the suggestion of Forum to use the option installs on my Snow Leopard disc, but when I go through the steps and software options are listed, the printer list shows zero KB and the 'Continue' button is grayed out.  No help there.

  I also used most often suggestions - unplug the printer, restart the computer, etc, nothing works.

  HP is still working for the full feature software and driver for C309a compatible with Mac OS 10.6 (Snow Leopard). You can check on the HP Web site for updates. What you have there is just the base driver which is preinstalled on your pc.

• HP Officejet 6210 All in One not working with Snow Leopard

  Downloaded SL yesterday and all of a sudden I cannot print.  It is considered to be one of the compatible printers.  I did a print test and it worked, but none of my apps (Word, Safari, etc.) will be printed.  I have checked my selection of the pilot, system information, deleted the driver, reinstalled the driver (from the MAC disk supplied with the printer), unhooked and rehooked everything, restarted my computer, etc.  Can't seem to connect my printer to my applications, even though the MAC in the preferences system, etc., seems to recognize it.  Any ideas?  Thank you

  Tried all of this.   Didn't work unfortunately but thank you for trying to help.  Finish reloading Snow Leopard all over again and that seems to help to deal with many problems.  Don't know why reload solved a lot of problems but at least I can print in Word which was what I really need at the moment to get a project.

  Thanks again!

  S4Girl