HP Officejet 6210 All in One not working with Snow Leopard

Similar Questions

• OfficeJet 6210 does not work with snow leopard

  My officejet 6210 worked very well on Mac OS 10.5. Now that I have snow leopard, when I try to choose my printer in system preferences, it says some software are absent, and the service program does not open. When I try, I can't print from MS Word and get the error "could not start the filter" / Library/Printers/hp/cups/filters/commandtohp.filter/Contents/MacOS/commandtohp "-operation not permitted.» Stoppage of work because the Scheduler could not run a filter".

  I installed new software/drivers on the web for Mac OS 10.6, even if the software/drivers are supposed to come with snow leopard. I tried all versions of deleting and adding the printer, restart the mac and printer, etc.

  Help! Ideas in addition to give up and go back to the old operating system or buy a new printer?

  You always had the hp for 10.5 software on your Mac.  Either uninstall or install the new software does NOT uninstall the 10.5 software correctly.

  Try this:

  Go to Applications/Hewlett Packard / click Uninstall HP
  Click on continue
  Highlight your device in the left pane
  Hold down the Ctrl and Opt Cmd and click on uninstall
  There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled)
  Click on continue and let it finish

  Restart your Mac

  Now run a software update.

  Then, remove and reinstall the printer in System Preferences, Print & Fax.

  If this does not work, install the wrong since the CD software (for 10.5 and earlier versions) and above of uninstall routine to run the extraordinary.

  After you get it to work, I would recommend against installing the HP software for your printer.  Scan by using the Capture of Image application into your Applications folder.

• DeskJet 3000 j310a does not work with Snow Leopard

  I have a printer wireless 3000 j310a dj. Until recently he worked well with Win XP, Win 7, and Mac Leopard computers. After that I updated the Mac OS to Snow Leopard, I can't print wirelessly from Mac. I used the re HP Installer - install the most recent driver. I tried to manually configure the printer with a static IP address. I deleted all printers in Mac system preferences, deleted all of the print queues and installed everything from scratch. Nothing works. When I try to print the printer Mac responds after a longer while the IP address of the printer is busy. Still I can log tool set up printer by typing the printer's current IP address and print a test page for that (even if printing is very slow).

  I'm out of ideas. Can anyone help?

  What router are you using? You've restarted it by pulling its plug momentarily?

• HP officejet 6210 all-in-one

  1. This printer is about 4 years old. It has a usb port to plug into a computer. My question is, can I buy a WiFi b/g/n dongle to make my printer wireless if it wasn't initially a wireless printer?  Its a HP Officejet 6210 all in one. Thank you

  Yes, but it is difficult to get a takes in charge of work and only impression, not sweeping.

• HP officejet 6210 all in one fax

  HP officejet 6210 all-in-one, fax not send fax with Vonage phone, I'm sure that most people have no problem, what should I do to fix this? Help, please

  I'm sorry that you are experiencing this issue. The fax works with Vonage, BUT it doesn't really work that well. This may sometimes work, it may not.

  Vonage is a (VOIP) Voice Over Internet Protocol. It has many transmitters communicate in both directions and can cause the interruption between the lines. You can try some steps, but it may not always work.

  1. go in the settings of your Fax

  2. change your Error Correction Mode (ECM) - OFF

  3 set the fax speed to slow DOWN

  Make sure it is properly connected.

  1 LINE 1 at the rear of the printer goes directly to LINE 1 of the Vonage modem (or wall plug)

  2 LINE 2 goes directly to the phone.

  Hope this helps. Let me know what happens.

• How to get the printer laserjet 3015 of all-in-one to work with hp520 touchsmartpc 64-bit with windows 7

  How to get the printer laserjet 3015 of all-in-one to work with hp520 touchsmartpc 64-bit with windows 7

  Hi baldwinj,

  Follow the steps outlined in the document below to install the OS driver in for this printer in Win 7 64 bit.

  HP LaserJet Color LaserJet and products of LaserJet AiO/MFP - install the driver included in the operating system Windows 7 (OS)

  Download drivers and software

• OfficeJet 7210 printing preferences does not work with the driver for Windows 8

  I have successfully installed the driver of Windows 8 (64 bit) full of features.  Printer copy, scan, fax and print from the computer.  However, I'm no longer able to print in grayscale, select a print quality (fast draft, project, etc.) and choose the paper type on the printer menu shortcuts in the printing preferences.

  In the box "what do I want?" and choose fast/economical printing, the selections above will appear in the list of options, but when you go to select an option in the drop-down lists that can empty al.

  You probably work with a more basic driver in Windows 8, and this is why you are not able to use these features. I would check to see if there is another driver that will allow you to use the. Here's a message written by a colleague who deals with how you can do this:

  http://h30434.www3.HP.com/T5/printer-all-in-one-software-drivers-e-g-Windows-8/How-to-assign-alternate-print-drivers-in-different-versions/TD-p/1957011

  Let me know how it goes and I'll get right back with you!

• Videos and games does not work, Mac Snow Leopard

  It is a problem, that I actually had for a while, but it never really touched a large part that I thought it was important. Now it is just boring.

  In fact, some video players and games online does not work. Most video players outside of YouTube will not work. The player will load, but the video never does. For example, the last video with that I got in trouble is the video player of Nickelodeon for the legend of Korra. When I try to watch that, I get a black box and an image of type "Loading" appears, swirls around once and then disappears. After that, it becomes unresponsive. This is typical of many, but not all, video players, I met on the web.

  I don't know if it's related, but I also had problems with various games. Often times, they work very well until at some point, as the end of a level, transition and then they will become numb. A good example here is the game Bloons Tower Defense 4. It is a game that I know was on my old system. But now, when it loads the level, it freezes before loading the tours available to place and reacts differently. An example is shown below. The box top-left question mark in the right sidebar should reveal a dart monkey and my money of departure must be filled, but instead, the game crashes to the top. I had similar blockages on a number of games, so I am sure that the problem is not just with this game.

  

  As I said, I had this problem for awhile now. I have updated Flash and my browsers several times since they started. I have these problems in all my browsers (Safari, Opera, Camino, Firefox), there seems to be a problem with Flash. I also tried to uninstall and reinstall flash, and disable all other plugins browser.

  I use a MacBook Pro with Macintosh OS X 10.6.8 leopard snow, 2.53 GHz Intel Core i5, with Flash 11.2.202.233. Current browsers: Firefox 11.0, Opera 11.61, Camino 2.1.2 Safari 5.1.5

  Any ideas what I might be dominant?

  These errors make me think that Flash has problems to write to the folder were Flash cookies are stored (LSO, sharedobject).  On Mac, it's

  • ~\Library\Preferences\Macromedia\Flash flash
  • ~\Library\Caches\Adobe\Flash flash

  You can check the permissions for these folders?  You might want to run check the permissions on your disk (http://support.apple.com/kb/HT1452), and then delete the ~\Library\Preferences\Macromedia folder and the folder of player of ~ \Library\Caches\Adobe\Flash.

• ProCS4 flash does not work on Snow leopard?

  Whenever I try to open any type of file in Flash CS4 (version 10.0.2), it crashes instantly, and I get the error message "Flash has quit unexpectedly.

  This problem has only started happening since I've recently updated my new macbook pro to Snow Leopard (mac os x 10.6.1).

  All CS4 programs will work perfectly,

  Any advice on how to solve this problem would be greatly appreciated!

  Thanks in advance,

  Tim

  I guess that your Flash CS4 was working fine before the upgrade to Snow Leopard...

  However, Flash CS4 works fine on Snow Leopard, many users of Snow Leopard.

  See, if the launch of a new user with administrator privileges account makes a difference...

  You may even try to uninstall Flash CS4 completely in the current account and installation of a new account if the above does not work...

  Keep posting...

• HP Photosmart Premium c309a doesn't fully work with Snow leopard 10.6.1

  I don't see any answers in the Forum on my printer model, so here goes-

  The printer is configured for a wireless connection.

  Cannot get IPhoto to print on a photo plate, no matter how I play with the settings in the Menu print.  However, using the keypad of the printer, I can print from the photo tray color photos using a flash drive.

  IPhoto and other apps, IWork 09 and ILife 09 will print to main paper tray, but not in color.

  Using the keypad of the printer, I can copy and print from the glass in BW and color.

  Cannot use Scan function Scanpro HP or the Device Manager, but can scan and print photo tray and main tray (but no computer or a drive - error message says no link found.

  All reports - network wireless, Network Configuration, Fax, printer status, test and HP homepage, say all right.

  I used suggestions from HP website without result, and the very nice fellow HP Chat Line, Manuel, told me in English that I have to contact MicroSoft for help.   I found a Web page apparently new to Mac users (HP printing from a Macintosh 10.5) and HP Mac-connect, but they do not seem to be updated for Snow Leopard.

  I have reinstalled Snow Leopard, nothing helps.  I also tried the suggestion of Forum to use the option installs on my Snow Leopard disc, but when I go through the steps and software options are listed, the printer list shows zero KB and the 'Continue' button is grayed out.  No help there.

  I also used most often suggestions - unplug the printer, restart the computer, etc, nothing works.

  HP is still working for the full feature software and driver for C309a compatible with Mac OS 10.6 (Snow Leopard). You can check on the HP Web site for updates. What you have there is just the base driver which is preinstalled on your pc.

• iPhoto was not installing with snow leopard

  I have an old 2007 MacBook on which I had to reinstall Snow Leopard.  I backed up, re-formatted, then re-installed to choose to NOT to reinstall the long list of software that I had had on the machine before.  When everything was done and I had recovered the data via the wizard migration, almost everything was back to normal, but has not installed iPhoto for some reason any.  How can I recover it?

  Install you from the original computer diskettes or an iLife DVD.

  (138287)

• 4315v All in One: Officejet 4315v All in One not copy, print

  I tried to copy a document. He fed properly and the printer seems to be print normally, but the output page was empty.  Then tried to print a document and the result was the same. There has been no recent changes to the computer configuration or network / config. I don't see a diagnostic tool for this version of Mac OS.

  Hi @rj148,

  Welcome to the HP Forums!

  I noticed your post on how your HP Officejet 4315v won't copy. I'm happy to help you!

  Please, try the steps in this guide, fixed the print quality issues. If this does not resolve the problem, contact HP phone support for your hardware options. (After you fill out the information, you will receive a phone number.) If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

  If it helps, please consider clicking on "accept as a solution." And, please click the thumbs up icon. The two icons are below this post.

  I hope that this post helps!

• HP OfficeJet J5780 all-in-One not Scan under Vista 64-bit

  I have brand new HP Pavillion Dual Core processor and 6 concerts computer memory, so I know that my computer is OK.

  I have a computer set up to Dual Boot Windows Vista Home Premium 64 Bit & Ubuntu Linux.

  Under Linux, the printer will print & scan (both)

  In Vista, it prints only

  My wife has Windows XP on his computer & it prints & Scans

  We come to the rear USB cable & before printing on computers.

  I have downloaded the latest drivers & critical updates & installed Vista without result.

  It will not even scan directly from the printer.

  On the printer, it says:

  No scan option, don't refer to the device Documentation. ???

   

  I know the printer is about 2 to 3 years, but it still works except scan!

   

  Please help, thanks in advance

  It is fixed after reading the HP Help Pages

  To scan in Vista... You MUST do it in paint or Windows Photo Gallery.

  Hope this helps someone

• HP Officejet 6210 All In One prints only on the left side of the page

  After good results, I tried to print a "retail Transaction" of Quickbooks account form twice with the same result:

  info. prints only on the extreme left, a straight line down...   I did adjust the paper tray.  What could be wrong?

  Thank you for your time and your advice.

  Texas-sleeper

  Salvation to the texas-sleeper,.

  I understand when you print from Quickbooks print right on the left side.

  I'll be happy to help you.

  In the program you are trying to print from, click file and then click on print. The print dialog box opens.
  Select your printer, click printer properties or properties.
  Click the paper/quality tab.
  In the press or type click on the dropdown menu, select the type of paper that matches the paper loaded in the paper feeder and the desired print quality, paper size, select the correct size of paper.

  Make sure that the appropriate paper size is also selected in Quickbooks software.

  Try printing a different file where this file is corrupted or damaged.

  I have provided a document of Quickbooks print does not correctly.

  Solve common printing problems.

  Try printing from another application to see if there a software problem with the printer or application you are printing from.

  I hope this helps.

  Thanks for posting on the HP Forums.
  Good day!

• I just connected the hp officejet 6210 all-in-one printer and it won't let me scan.

  Message on printer: "You must run or install software device" I just installed in my computer and cannot parse. I don't have the software because the printer has been givin to me.

  Hello

  You need to install the complete software to activate "scan to computer".

  You can get the drivers here

  http://h20000.www2.HP.com/bizsupport/TechSupport/ProductList.jsp?lang=en&cc=us&TaskID=135&prodTypeId=18972&prodSeriesId=391210