CS5 apps must be uninstalled to run CC app? Seriously! ??
OK, I'm furious. I tried to sync some fonts and realized that I had to run CC app. I find that it is no longer loads and Adobe solution is to 'uninstall' CS5 apps. Seriously! I trust AI CS5 because it works better than any of the Illustrator programs later, IMHO.
Now I am at a crossroads, and I drop the best AI ever made Adobe app or sacrifice for "compatibility" with the losers? I'm more than a little ticked right now.
You need not uninstall CS5 to launch the CC app.
That's what I have now:
But in case you should make a serious cleaning, you must uninstall all Adobe applications on your system. Has always been the case (I remember that I had to do this 2 or 3 times with all my Creative Suites at the time of CS4 and CS5 and I always wanted to have all installed versions that would go even on my system).
Tags: Adobe
Similar Questions
-
I have and try to reinstall Photoshop CS5.1 on a Macbook Pro running El Capitan (OS10.11.2). I downloaded DesignStandard_CS5_LS1.dmg but when I double-click installation I get the message "'Install' is corrupted and cannot be opened. You must eject the disk image. "Someone knows what's going on? I tried to download with Safari and Firefox, but the same thing happens.
This information is a MUST to install old programs on Mac El Capitan
-You can't get the same error message, but these two links will help with older programs
Install CS5 on Mac 10.11 https://forums.adobe.com/thread/2003455 can help (also for others than CS5)
-also a TEMPORARY security change https://forums.adobe.com/thread/2039319
FAQ on the Mac 10-11 https://forums.adobe.com/thread/1979303
-
I'm currently running Vista, 32-bit. I am considering upgrading to Windows 7. I ran the report Upgrade Advisor and he said "Mozilla Firefox 20.0.1 must be uninstalled before the upgrade to Windows 7. You will be able to reinstall it after upgrading to Windows 7. "This seems inaccurate info, based on the Firefox site, but I want to check what I have to do before you start the upgrade. Leave Firefox installed and in place when I update or uninstall and reinstall then after the upgrade?
Hello herplaw, you're right, this doesn't look good - firefox will work fine on windows 7. I leave it installed and to proceed with the update. in any case (if you need to reinstall it later), you can also save personal information that is stored in your firefox profile before continuing: back up and restore the information contained in the profiles of Firefox
-
Hello!! I need your help-
I lost the second Activation of my CS5 apps. (probebly didn't remove my apps properly when I upgeaded my computer.)
It would be greate if someone from Adobe could reset my SN. I do not know who ask in the support line, they told me that I must seek help in the chat...
TNX.
Michal
To the link below, click on the still need help? the option in the blue box below and choose the option to chat...
Serial number and activation support (non - CC) chat
http://helpx.Adobe.com/x-productkb/global/Service1.html ( http://adobe.ly/1aYjbSC ) -
How can I fix this error? Thank you.
SQL server installation is either corrupt or has been tampered with. Please uninstall and run again together at the top.Hi DMarie125,
The question you have posted is better suited to the MSDN forums. You can ask your question in the help link.
http://social.msdn.Microsoft.com/forums/en/category/SQLServer/
Hope the helps of information.
-
Dear Mircosoft
I just bought the Microsoft Live Cam VX-2000. You are able to help.
I followed the installation, then at the end when the picture came on the screen an error message came on the screen: "a later version of the Webcam Live software is already installed, to reinstall the Webcam Live software, you must first uninstall the software of Webcam Live from your computer."
I'm not very user-friendly computer.
I get a green flashing on the camera.
I can't use it in Skype.
Thank you
JO SmithHi josmith416342,
· You have installed all software associated with the device?
· Do you have any device life Cam earlier?
Check to see if the following is useful.
Method 1: Check list of programs for the device relating to the software. Uninstall the same and try to reinstall the software.
How to change or remove a program in Windows XP
Method 2: You can follow the steps in the following article and see if it helps. The error mentioned in the article is different, but this can be tried.
Troubleshoot installation of Intellipoint and IntelliType LifeCam software
-
RMAN-06034: at least 1 channel must be distributed to run this command
Hello
I'm trying to restore rman backup archives logs, but the rman fails with the error below, any help would be appreciated.
RMAN-00571: ===========================================================
RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
RMAN-00571: ===========================================================
RMAN-00579: the following error occurred at 2009-06-24 09:48:05
RMAN-03002: failure during the compilation of command
RMAN-03013: type command: restore
RMAN-03002: failure during the compilation of command
RMAN-03013: order type: HAKIMOUSS
RMAN-06034: at least 1 channel must be distributed to run this command
RMAN script
-----------------
connect target xxxx
Connect catalog xxxx
connection Assistant xxxx
Run {}
allocate auxiliary channel t1b type 'SBT_TAPE' parms trace 'ENV = (NSR_CLIENT = xxxx, NSR_SERVER = xxxx, NSR_DATA_VOLUME_POOL = ultrium)' 5.
allocate auxiliary channel t2b type 'SBT_TAPE' parms trace 'ENV = (NSR_CLIENT = xxxx, NSR_SERVER = xxxx, NSR_DATA_VOLUME_POOL = ultrium)' 5.
allocate auxiliary channel t3b type 'SBT_TAPE' parms trace 'ENV = (NSR_CLIENT = xxxx, NSR_SERVER = xxxx, NSR_DATA_VOLUME_POOL = ultrium)' 5.
allocate auxiliary channel t4b type 'SBT_TAPE' parms trace 'ENV = (NSR_CLIENT = xxxx, NSR_SERVER = xxxx, NSR_DATA_VOLUME_POOL = ultrium)' 5.
Restore logseq archivelog = 145200 until logseq = 145204;
output channel t1b.
output channel t2b;
output channel t3b;
output channel t4b.
#
}You open a large number of auxiliary channels in your unknown database and OS environment. Auxiliary bodies are necessary for creation of duplicate/Eve/TSPITR tasks, but not necessary to restore something to the database target. Remove all the auxiliary elements of the script.
Werner
-
Crash at startup: CS5 Apps in OS 10.6.4
SOS
I searched the database of the forum and haven't found enough comments to help with this problem:
Computer: iMac Core i5 running Snow Leopard 10.6.4
Adobe: CS5 Design Standard
Illustrator version 15.0
InDesign version 7.0.0.355
Apps of CS previous Design: CS3 (currently uninstalled/disabled)
Font management: Suitcase Fusion 3
Problem: Amnesty International and ID crash on launch - either directly from the application or an existing file. After the initial installation, the programs open very well. Now only Photoshop opens fine and others will not.
In previous posts, I saw discussions on possible and guilty of font management policies and guilty of permission. Based on these observations, they meet as "best estimates". But given the number of positions on the issues, not Adobe just introduced statements of the resolution or the patch somewhere?
So what seems to be the consensious on the problem and solutions? Thank you in advance for answering and I will be the guest answering questions because I now have to work on my G4 more after spending a gazillion $ for upgrade in the era of 2010.
PS Adobe: I hold a share, and it undermines the value of this investment.
New - I appreciate the help and solutions...
Both applications have been fixed since the release.
Illy is 15.0.1 and ID is 7.0.2
I suggest to run these updates immediately.
Bob
-
upgraded to CS6 in CS5. now the two are running?
I just upgraded to CS6 in CS5. I was told by tech support that I would be prompted to enter my new serial number CS6 to start the download, and that I would be also asked to enter my CS5 serial number to activate the update of my existing software.
I followed the step by step installation, but I was invited only to enter my serial number CS6.
Installation is now finished and I now have versions both CS5 and CS6 running.
Is this normal?
Any help would be greatly appreciated.
Feel free to uninstall CS5. Just be aware that it will mess up the file associations, will not work if a double click to directly open a file for editing. If you do not need disk space, simply leave it in place.
Mylenium
-
Impossible to uninstall LabVIEW Run - time Engine 2013
I have a PC that had both the LabVIEW Run-Time Engine installed 2013 and 2013 LabVIEW development environment. I uninstalled the 2013 LabVIEW development environment, and now the executable files will not work. They say that the Run-Time of 2013 is not installed. However, execution 2013 is listed in MAX. It does not appear in the list of available software to uninstall, so I can't uninstall and reinstall either. When I try to run the installer from the runtime of 2013, it is said that the runtime is already installed. It seems that I am stuck with a corrupted installation of Run-Time? Is there anyway to remove completely the execution so I can reinstall it properly?
Thank you
I thought about it. I managed to uninstall the runtime engine by following the instructions here: http://digital.ni.com/public.nsf/allkb/F4B8D92A304E4A7B862577460072002F
-
I get this error message everytime I turn on my computer. I know how to uninstall it, but do not know how to re - run the installer. I want to do without risk if losing important files.
Hi L4linda,
Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the forum of TechNet SQL server.
http://social.technet.Microsoft.com/forums/en-us/category/SQLServer
-
Installation DRIVERS error code noon says that I must first uninstall all other unused midi drivers
Original title: MIDI DRIVERS
try to install a yamaha usb driver... error code says that I need to first uninstall unused midi... pilots knew there were others, I searched but not found... Please help
Hello
You must show the ghost of devices and then delete old drivers from there. See the articles below for more information.
Device Manager does not display devices that are not connected to the Windows XP-based computer
http://support.Microsoft.com/kb/315539Advanced troubleshooting tips for General USB for Windows XP problems
http://support.Microsoft.com/kb/310575I hope this helps.
Thank you, and in what concerns:
Shekhar S - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly. -
Hello world
I'm an Oracle Apex developer for 2 years now.
Recently, I was in charge of search and do a few examples of how to print pdf with Oracle Apex 4.2.2 (Oracle 11 g).
I want to use Apex 2.0 listener that standalone as a print server, we installed and we changed the configuration of the print server in the administration workspace. Then I created a report query and when I have the test report, a pdf file is downloaded, but when he opens, Adobe reader tells me that is not a valid pdf file.
Our Apex application runs in the pl/sql gateway mode not Apex listener.
So my squestion is: "" Is it mandatory for application Apex runs in mode listener Apex to use Apex listener 2.0 as a print server?".
Thanks for help.
Best regards
You
Khadija Khalfallah wrote:
Thanks for your reply.
We have an apex application that already runs using EPG and we want to allow printing of the pdf in it. So, we installed the ADR offline, to use as a print server but it does not seem possible if the Apex app uses a different web server than the listener of the Apex. right?
Thank you once again.
You have answered your own question... If you use the EPG, then you can NOT use another product middleware or application server until you turn off the EPG...
Why you use the EPG in production? Oracle does NOT recommend this (see the APEX Oracle installation instructions..)
Thank you
Tony Miller
Software LuvMuffin
Ruckersville, WILL -
Impossible to update the CS5 apps in Windows 10
I'm trying to update to After Effects CS5 Version 10 to 10.02. in Windows, 10. I can't successfully run the updates downloaded using Adobe Application Manager. I get errors for each application indicating "some updates could not be installed" "update is not Applicable.
I was able to update Illustrator, Photoshop, and first in Windows 7 on this computer before an update of Windows 10. I also did some prior tests on Windows 10 beforehand with Premiere Pro installations since she need an installation in Compatibility Mode or cause errors running Premiere Pro. But unfortunately now running Windows 10 I am unable still re - run updates for Illustrator and Photoshop.
I right click on the hotfix installer to check compatibility, but MAO appears still and will not run the update. So my question would be if the full downloadable versions of CS5 Master Suite would include the latest updates. Then you could install both in Windows 10 in compatibility mode and fixed. Applications run well in W10, but clearly, there are a few problems with specific applications installation and all updates on Windows 10.
Hoping it can be a workaround with these downloads. Appreciate any help. Maybe this post to MS too.
As I just found the solution solved my own question. Adobe shows this procedure for CS 5.5 and creative cloud but it updates Adobe Application Manager of CS5 and so I was able to run my installers and successfully run all updates for applications in Windows 10 CS 5. http://www.Adobe.com/support/downloads/thankyou.jsp?ftpID=4773&FILEID=4437
Hope this helps people. Windows 10 and Adobe CS 5 works well. Don't forget to install in Compatibility Mode for Win 7 and get the update that I linked above for the AAM.
John
-
Don't know why cs6 and indd cs5.5 are on this computer windows 8, but I uninstalled cs5.5 (thinking that cs6 could open them) and now my files does not open directly and the icons are white.
https://helpx.Adobe.com/x-productkb/policy-pricing/CS6-product-downloads.html
Maybe you are looking for
-
Touchpad does not work after the removal of the Satellite U400-18F
Hello Yesterday I disassembled my Toshiba Satellite U400-18f to clean dust fan, I unplugged all the cables except the cable touchpad I tried to pull up, but nothing happened, so I went back just as it was before. My laptop worked fine except the touc
-
Pavillion g6 1035 ex: network controller for ex hp g6 1035
I'm missing the driver for network controller with more hardware id PCI\VEN_14E4 & DEV_4727 & SUBSYS_148310 & REV_01 PCI\VEN_14E4 & DEV_4727 & SUBSYS_148310C PCI\VEN_14E4 & DEV_4727 & CC_028000 PCI\VEN_14E4 & DEV_4727 & CC_0280 Help, please
-
Trying to export from Ultiboard I can't get the export button
I am trying to export a circuit of Ultiboard design to a DXF file. The export button is grayed out and non-operational. I can't use either shortcut keys. I tried this with my circuit and a circuit or smaple with no luck. Any suggestions to fix this?
-
Transfer Outlook Express 6 to a Web site.
Recently, I was not able to click on a Web site located in an email and transfer on this site. I don't have this problem never before, only recently. I'd appreciate any help you can give me. Thank you in advance, Michael George E-mail address is remo
-
Blue screen STOP error: 0x0000007B
Last night, I shut down my computer as usual, allowing it to update itself. This morning I turn on only to find a formidable bluescreen message: A problem has been detected and Windows has shut down to prevent damage to your computer. If this is the