CS6 departure signs and very slow application

Similar Questions

• Satellite T110-11U: WLan connection dropped and very slow performance

  Hi people,

  I use a Satellite T110-11U running windows 7 Home premium.

  After having initially was very satisfied with its use, it now becomes more and more frustrating to use with wifi, with connections dropped and very slow performance.

  I have updated the BIOS and think I have updated all drivers wirelss, but could be the problem. It seems that wireless, software of management is at fault because the networks are detected, but not clinging.

  Any suggestion or tips to try will help save my sanity!

  Thanks for your help.

  John

  > have updated the BIOS and think I have updated all drivers wirelss, but could be the problem.
  If you need to make sure that you use the latest WLan driver.
  The driver can be downloaded here:
  http://APS2.toshiba-tro.de/WLAN/

  The laptop uses the Realtek RTL8191SE of WLan card.
  Please also reset the settings of the Wlan router. I had a lot of problems with my WLan and after the reset of the router, performance problems disappeared.

• Cannot scroll to delete several email messages-just one at a time and very slow-help?

  MacBook

  10.10.5 Yosemite

  Can not hold the command to scroll down and delete send several messages, just one at a time and VERY slow-help?

  If the emails are side by side, select one, then hold down the SHIFT key and select the last one. Hold the command key and clicking on the individual emails should work. What happens when you try?

• my computer does not work properly and very slow

  Dear Sir.

  my pc does not work properly and very slow

  Can you help me

  Velmurugangr

  Here are some tips to help you speed up your system and Foundation repair.

  1. http://support.microsoft.com/kb/310312 cleaning disc

  2 Disk Defragmenter http://support.microsoft.com/kb/314848

  3. how to uninstall the unwanted/unused programs http://support.microsoft.com/kb/307895

  4. How will I know if I have a http://windows.microsoft.com/en-US/windows7/how-can-i-tell-if-my-computer-has-a-virus virus

  5 tools to remove the virus Security Essentials

  6. how to run check disk http://support.microsoft.com/kb/315265

  Your question is a little vague, suggestions above should give you a good start to decide the issues you face. Let me know it it helps. Thank you.

• Lightroom showing constantly "unresponsive" and very slow since the last update. With the help of Windows 10. Extremely slow import!

  Lightroom showing constantly "unresponsive" and very slow since the last update. With the help of Windows 10. Extremely slow import!

  Hi Dear

  Please see this thread windows Lightroom CC 10 'unresponsive' number.

  Let us know if this helps

  ~ Assani

• Photoshop and indesign CS6 freeze and very slow.

  My two indesign and photoshop are extremely slow. Freeze all the time and are very slow.

  It takes forever to open the software. InDesign crashes too often. Both have been updated recently but still very slow. How can I solve this problem?

  Hi louiselee,

  Please see the following article for Photoshop CS6: How to tune Photoshop CS6 for optimal performance

  You also check: 14 tips Tweaks & speed Up Photoshop CS6 Performance

  Let me know if it helps.

  Kind regards

  Tanuj

• Given that downloading Firefox, my mouse is sticky and MSN games are hard to play and very slow to download. Any suggestions?

  I checked the system, apparently the mouse works fine. The games are very slow to download, and it is almost impossible to play because the mouse is so slow.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the start safe mode window or make changes.
  • https://support.Mozilla.org/KB/safe+mode

  Try disabling hardware acceleration in Firefox.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes
  • https://hacks.Mozilla.org/2010/09/hardware-acceleration/

• Re: Wifi works fine on an AC/DC power supply. And very slow on battery

  Dear friends!

  When I use my laptop on AC/DC adapter, wifi works perfectly. Fast and without any problems.
  But after that I use it on battery, wifi works very slowly. I wait about a minute or two to open any site.
  Yes, it works, but very very slow. When I connect the card once again, immediately without any problems!
  The same site opens in seconds!
  What do you think of this problem?

  Thank you very much

  I could solve the similar problem on my laptop by changing settings in the WLan card properties.

  Go to _device-> advanced-> properties-> tab_ Wlan card Manager

  Here I put the on OFF power saving mode (turn off).

  This option controls the power resources if the laptop is running on battery
  So disable it and see if you can notice some improvements.

  Concerning

• Y480 after a very slow application of 8 GB ram upgrade

  Hi I install a newer driver to y480

  someone at - it experience issue where IE very slow loading

  after upgrade to 8 GB of ram

  the two is two different brands of 1600 mhz ram ram

  Mushkin 1 1-samsung

  After that I take off 4 GB with any brand running on it, it works smoothly

  any idea?

  are trying to Exchange

  and I discovered my dekstop aero theme is 5.3 rating

  so I turn off transparency

  put IE to run with nividia

  now give me side 7.3 for dekstop

  up to now no more slow question

  will observe to learn more

• TCP between PC and very slow LM3S8962

  Hello

  IM using a TCP connection between my PC and the LM3S8962. Ive been doing some tests and the connection is VERY slow - only transmitting every 200ms or so--even with the simplest examples two examples TCP incorporated and not incorporated. This could be due to the algorithm of Nagel? Ive tried using the TCP-NODELAY package while getting connection errors every time I try to put in place.

  Any help would be appreciated,

  Brad

  I discovered that including a 'warning error' vi and ignorant error 56 solved the problems of speed using normal TCP. STM this inherently includes in their functions and so is the reason why the STM was so much faster.

• We have a printer All - in 6110 and very slow to print. a page in 30 min. new ink cartridge.

  We have the all in one 6110 and now its very slow print new ink cartridge and the downloaded drivers but it shows only a page in 20 to 30 min. is not a difference in color or black and white.

  Help, please.

  This is caused by the failure of one of your cartridges.  I don't know if supports Officejet 6110 print reserve mode, but try the following: remove the black print cartridge and print a test page.  The printer prints at a normal speed?  Is therefore the black cartridge was the issue and needs to be replaced.  If it isn't then, put the black back cartridge in and remove the color cartridge and the test page printed.  If the printer now prints speed the color cartridge is responsible and must be replaced.

• To access the Oracle Postgres using DG4ODBC and very slow psqlodbc

  I've set up DG4ODBC a base of Oracle 11 g Windows 2003 32-bit to access a Windows 2008 64 bit 9.1 database Postgres, you use the psqlodbc (32-bit) driver.
  
  I can't do it because of the queries, but they are very slow. The reason is that the place where clause of the query is deleted somewhere along the line (I've seen actual queries run by Postgres using pgAdmin server status screen) and all the rows of the table are extracted from Postgres. Naturally with tables bigger than the few lines which means do a full table in Postgres scan, so that transfer a lot of bytes through the network.
  
  "For example, if I mark from Oracle like this: select * of" dps_user"@pg where 'id' = '2423', run the sql in Postgres is: select * from dps_user, which retrieves all the rows of the table! When I get the result of the query in Oracle, I get only the row with id 2423, so I guess that Oracle Gets the entire table and that he not filtering at its end.
  
  In a separate 32-bit Windows XP machine I have implemented the same psqlodbc driver, and ran the same query by using Microsoft Query. In this case, the query to run in Postgres contains a where clause and, therefore, it is much faster because a unique index scan is performed in Postgres, and that a line is transferred to Microsoft Query.
  
  Could you help me, please?
  
  Thank you very much
  
  Carlos

  Hi Carlos,
  Yes - he manipulated me the SR ;-)
  Sometimes they have a little more time and information to study can throw up the answer.

  Kind regards
  Mike

• CC very slow applications. Takes an average of 8-10 minutes to deal with any action. Have had computer checked and there is no hardware problems. We have reinstalled the software. Never had a problem until we went to CC. Any input will be appreciated.

  Hi kalpanap86451599,

  Ask you to kindly visit the link shared below and select the specific product community.

  https://forums.Adobe.com/welcome

  The experts would be able to help you with the application of the product.

• CS6 Adobe installation is very slow if access to the internet is blocked

  Hello

  I noticed that our facilities Adobe CS6 (using package AAMEE) were surprisingly slow (as in five hours on a fast machine).  I have worked for the cause of the problem and am posting here in hopes it helps someone else has the same problem - in addition, if someone from Adobe is reading this, it would be nice to get it fixed, at least for future versions. :-)

  The problem is that our machines have no direct access to the web sites on the internet, i.e., port 80 traffic is blocked by the external firewall.  I discovered that Installer CS6 tried repeatedly to contact various websites, including crl.verisign.net, probably in order to validate digital certificates on the files in the installation package.  Each such attempt was set to expire before the next was made.  Firewall Configuration Windows to block these attempts reduced at the time of the installation of five hours thirty minutes.

  On Windows 7, this command allows to install a firewall rule that blocks traffic outbound port 80:

  netsh advfirewall firewall add rule name = "block www" dir = action = block protocol = tcp remoteport = 80

  Once installation is complete, this command deletes the rule:

  netsh advfirewall firewall delete rule name = "block www.

  For later versions (Adobe CC and beyond) you should block port 443 as port 80.

• Very slow application on Portege R500 laptop

  Hello

  I'm having a problem with Sage Line 50 V13 - 2007 (please don't stop reading!) on two laptops of R500 Centrino Duo. Two laptops have 1 GB of RAM and U7600 1.2Ghz processors. I am posting this in the Sage forums and call wise too. All Sage updates are installed.

  Registration of the activity of a single wise client causes Sage hang for a minute and twenty seconds before displaying the results. During this time that the EXE of Sage takes about 9% CPU, the CPU total use plane around 10%. Use of the network (switched 100 MB link) is about 1% use. Laptops are connected to the network, not to a docking station, and I tried the CPU frequency in the Toshiba Control Panel applet on strong and dynamic. It is not to open a report in an external program, this is purely Sage. Other laptops and computers open this screen activity in about a second, their specifications as follows:

  Old Toshiba PentiumM 1.3 Ghz, 504 MB RAM
  XXX T7200 Core 2, 2 GHz 1 GB RAM
  Destop PC: Intel 3040 @1. 86 Ghz Dual Core 1 GB

  I tried to set the processor affinity Sage EXE process to one or the other CPU instead of two, to no avail.

  All the world has the same problem? Thank you very much in advance for any ideas or suggestions.

  Great info, it might be useful for someone else