CS6 support for Nvidia Quadro 4000 K

Similar Questions

• Support for Nvidia Quadro M2000M with Premiere Pro CC

  Hello

  We want to buy a new laptop Performance.

  There is a NVidia Quadro M2000M graphics card. ()

  ( http://www.NVIDIA.de/Object/Mobile-Workstation-GPUs-de.html )

  It has 4 GB of VRAM and Support for CUDA. (640 CUDA units)

  Maybe someone has this already tested configuration?

  This card would work with first, active CUDA?

  Thanks in advance.

  For a Performance laptop, it's a lousy performance video card, but it will work.

• HP Z400, nvidia quadro 4000, main monitor connected on DisplayPort does not work

  Hello

  My first (primary) display is connected through an adapter displayport to DVI adapter (HP P/n: 481409-002 HP [email protected]).

  Now when I turn on the PC, the monitor gets no signal.

  I also wrote a message to HP support, but I don't have an answer.

  Support-ticket-no: #71940913 # and #72360491 #.

  Things, I try to solve the problem:

  • another adapter connected --> without success
    
  • connected to another cable DVI --> without success
    
  • Monitor connected to the other graphics card DisplayPort --> without success
    
  • different versions of pilot / installed (certified by HP for Workstation Z400, later Nvidia SolidWorks) --> without success
    
  • A monitor with display port without adapter plugged into the graphics card display port--> it works
    
  • Another monitor with DVI adapter and connected to the DisplayPort --> without success
  • Graphics card on the other slot (bottom) inserted PCIe --> without success
  • Monitor isolated more than a minute of the grid --> without success
  • In Windows 7 (Win and P - key key) the advanced value --> without success
  • Update BIOS to v3.57

  Now I do not continue and write a post here, with the hope of help.

  System:

  • HP Z400 workstation
  • nVidia Quadro 4000 (driverversion 311.66)
  • Windows 7 Pro 64-bit

  Now I need help from you.

  Maybe, we also had such a "phenomenon".

  Thank you!

  Greetings Marco

  Hello

  I wanted to just let know you that the problem has been resolved with the support.

  They sent a new adapter and it worked.
  This is the same adapter as described above.

  Could not believe it yet, but I'm glad that it finally works again

• Missing GPU acceleration with graphics NVIDIA Quadro 4000 card

  HI -.

  I have a PC running Windows 7 with a NVIDIA Quadro 4000 card and 16 GB of RAM. I have Premiere Pro CS6 v6.0.5 and first Pro CC v7.2.2 (just installed).

  When I create a new project in CC, my only option under video rendering and playback is Mercury Playback Engine software only. However, when I open a project in CS6, I get this option and also Mercury Playback Engine GPU accelerated (CUDA).

  Any thoughts on why the GPU option would not put at my disposal in CC?

  Ed

  Yes. 334,95 is the correct driver. Pilots who are CUDA 5.0 are no longer supported in Premiere Pro.

  Best,

  Peter Garaway

  Adobe

  Premiere Pro

• Graphics NVIDIA Quadro 4000 card

  I see that the new Fermi based Nvidia Quadro 4000 is now available. Does anyone know if or when there first and After effects CS5 support for this card? Any comparison with 470 or 480 available?

  People has generally tend to skimp on the PSU, you are. It is one of the components most neglected and difficult to diagnose when mysterious problems, but a block of POWER: 425 W will not cut it. Get at least a 600W unit and it's the bare minimum. with the very overvalued and underspecced Quadro 4000. Go even higher with a price much more affordable and powerful 470.

• Tecra M9: When a driver WHQL XP for NVidia Quadro NVS 130 M will be available

  Hello

  I am trying to downgrade a Tecra M9 from Vista to Windows XP and I want to know when a driver WHQL for NVidia Quadro NVS 130 M will be released because the latest version from the support CD is a beta version and is not WHQL.

  Thank you very much

  But - this important if the driver passed whql? In my opinion NO, because this thing whql is a pure invention of microsoft. If I were you I would install that drivers matter so certified or not and if you really have problems, then you can always give some feedback.

  By the way: where sought pilots?

  Welcome them

• PS CC 2015 crushing on launch Win10 x 64 nVidia Quadro 4000

  I just migrated to a new Win10 x 64 machine with nVidia Quadro 4000 video card. It's the same model of card I used in my Win7 x 64 machine with good success. I bought these cards specifically for compatibility of Photoshop.

  On the new machine, PS crashes at launch, with typical error: "Adobe Photoshop CC 2015 has stopped working".

  I tried all the solutions I could find online, including renaming them librarylookupfile, check that I have the latest video drivers, etc.. Nothing did. I'm puzzled. Interestingly, after that the first couple goes down, offered creative cloud suddenly a PS 2015 update, which I installed it. Still no joy.

  Here are the details of the problem in Windows journal:

  Source

  Adobe Photoshop CC 2015

  Summary

  Stopped working

  Date

  01/01/2016 14:49

  Status

  Report sent

  Description

  Application of vulnerabilities path: C:\Program Files\Adobe\Adobe Photoshop CC 2015\Photoshop.exe

  Signature of the problem

  Problem event name: APPCRASH

  Application name: Photoshop.exe

  Application version: 16.1.1.327

  Application timestamp: 5667fb90

  Fault Module name: SelectivePalette.8li

  Fault Module Version: 2.1.4.20903

  Timestamp of Module error: 50473db7

  Exception code: c0000005

  Exception offset: 000000000013a 812

  OS version: 10.0.10586.2.0.0.256.48

  Locale ID: 1033

  Additional information 1: fd33

  More information 2: fd33f64d55d2d485ab8741c75380ddca

  3 more information: 75ca

  Additional information 4: 75ca94d43e4a591602d76b2e4fa9a045

  Additional information about the problem

  Bucket ID: 8af8b1bf66d9f408d866866de4f5f3b2 (120375896279)

  Hi adpremxxx,

  Greetings

  This crash log is for your Nik/Google selectivePalette plugin. To update or disable the Nik/Google plugins.

  You can also try to open PS while holding down the SHIFT key, click Yes at the prompt and see if that does the trick.

  Concerning

  Rohit

• How to install the graphics card Nvidia Quadro 4000 in Dell R710

  Hi all

  I read a lot about the installation of the Nvidia Quadro PCIe x 16 card in a Dell R710.  I know what parts I need to order (Dell GP347 PCI-e left Riser), but I don't know how to install the power cable 6 pin required by the Nvidia card.  Where would connect it to the motherboard Dell R710?  Is there a place to connect?  If not, is there some type of power provides I can hang the 6-pin power Cable from Nvidia and power the server?  Any help would be appreciated.

  It's a bit old now, but thought I would answer that I had this work and very happy with the performance!

  In addition to editing card, that I needed, there is NO way to provide the power that the card must provide without a power SUPPLY.  There is a really small box listed on Newegg called "ePOWER EP - 450CD 450W ATX12V/EPS12V modular juice dedicated to the area of graphics card and CPU of power".  Buy and run the GPU power cable to an empty PCI slot at the back of the Dell server.

  I also bought some video cards NVidia Quadro 4000 2 GB GDDR5 PCIe for each of my 5.5 ESXi servers. Also, I left my active integrated video graphics card and it is always primary for my hypervisor.

  Download and install the NVidia ESXi drivers on their site and follow the directions to install.  Reset.

  I use sVGA with my Horizon offices and downloaded a trial version of Sketch-Up to test the 3D.  They have a community of users who post 3D renderings and you can download it directly from the Sketch-up program.  Cruise around and check the performance.

  As a side note, I noticed IE worked worse way by using the GPU when browsing the internet.  Go to settings, advanced in Internet Explorer and has the option at the top of the page "use rendering software instead of GPU".  This change makes IE works as expected.

• Combination PPro CS6 - NVidia Quadro 4000 - Matrox MXO2 HIM still does not

  Hello world

  Six months after the last, I tried the CS6 body work, when it crashed constantly and I decided to uninstall, I tested again yesterday to see if anything has changed when you use the 6.0.3 premiere version, but nothing is.

  Meanwhile I work perfectly with PPro CS5, proving that the combination of nVidia, Matrox and first is basically good.

  Matrox has even released drivers especially for CS6, and I also updated to the latest nVidia drivers. Unfortunately it seems fairly certain that the nVidia in this system component yet proximate cause crashes when I active the body CS6 MPE.

  The error remains the same, like six months ago:

  The NVIDIA OpenGL driver detected a problem with the display driver and can not continue.

  The application must close. Error code: 3

  I noticed that nVidia does still no partner certified drivers for CS6, I think it's completely lame. I guess I have right now the most important question is:

  Someone at - it system with Premiere Pro CS6, graphics nVidia Quadro and a Matrox MX02 who managed to make it work? And if so, what kind of drivers were installed for the nVidia card?

  I use a system Intel 12 processor cores, 24 GB of RAM-based and as said, a Quadro 4000 2 GB card on board.

  I want very ardently to CS6 before 7 fate. Any help is appreciated, a response to the above question would be wonderful superduper.

  Hello Lewiz,

  Please confirm that the nvidia card is in the dwelling of pci e x 16.

  Confirm the bios is updated as well.

  You can also pickup the latest Intel chipset driver.

  On the Intel site, there is a search function, you can download and run, which is the best drivers for your particular computer.

  http://Downloadcenter.Intel.com/default.aspx?lang=eng

  You have access to another graphics card?

  Concerning

  MOVEMENTS

• Adobe CS6 Windows Production Premium Support for NVidia K5000 video card?

  When the Windows of Adobe CS6 Production Premium version will support the New NVidia Quadro K5000 Video card?

  We currently have not so the GPU acceleration.

  Help!

  You don't need 'official' support to make it work.  He just close PP and remove the file cuda_supported_cards.txt from the PP folder in Program Files.  Then restart PP.  You should now have the option to select the GPU acceleration.

• Surrently there is no support for NVIDIA 660GTX GEFORCE 3D graphics card not rendered ray trace in After Effects CS6.

  How can I get Adobe to provide rendering support traced 3dRay

  for the GPU so that I don't have to go buy a GTX 670, 680 or 690 card, along with a new power supply, which it will need to run?

  There is a 'hack' that is displayed all over the internet which explains how to add your GPU to the list of the EI of the cards 'approved '. Note that this is a feature not SUPPORTED in CS6, so proceed at your own risk.

• Cannot install drivers for NVidia Quadro K3000M on my M6700

  Hi all

  I just formatted my new M6700 (remove the oem & such other partition). I installed windows 7 pro from the CD provided by dell, then downloaded & installed the drivers from dell support using my service tag.

  Problem, NVidia drivers refuse to install, saying that something as there is no compatible hardware. Version of the Dell 296.79, A00. I tried the latest film from the official NVidia site, 305.93 WHQL version. Same answer. Tried the version 32 b, of course, it did not work... I tried to uninstall default windows via a retry Device Manager, nothing. I allowed windows to browse the internet, he found something that removed the "yellow"! in the Device Manager without resolving anything, games or double screen still does not work.

  So, I'm a lost here. Any advice?

  Software update of the client system has not solved.

  But I finally managed to make it work. I downloaded the Intel HD 4000 on Intel official site, version 15.28.7.64.2867 dated October 5, 2012. And this one has been correctly installed, allowing my two screens to work, when the Video_Driver_VWTH6_WN32_8.15.10.2639_A00 I got from Dell did not only present.

  Then I tried the 305.93 official NVidia. Has not worked. Then Dell Video_Driver_J43Y9_WN_296.79_A00. Worked.

  So that the from should be fine for me. I'll try to install directx as well as a game just to be safe, but I am this marking as answer to the question.

  Thanks for your help Terry.

• The new Re: support for NVIDIA GeForce GTX 680MX 2 GB GDDR5?

  I am about to buy an iMac 27 "2012 & would like to install CS6.

  I don't know how this would be for a Mac... but I have a saved link

  http://www.vidmuze.com/how-to-enable-GPU-CUDA-in-Adobe-CS6-for-Mac/

• After Effects CS6 catastrophically freezes Mac Pro / Quadro 4000

  From late yesterday, my system crashes catastrophically shortly after I start moving things around in a comp. AE also, Photoshop CS6 did the same thing for my system this morning when I was using the marquee tool. I use CS6 Production Premium for the last 3 weeks or so, with almost zero problems in one of the applications up to yesterday.

  When it freezes, a screen goes black (the main, powered by a Quadro 4000) and the other is completely blocked on what he showed up until I hold in the power button and shut it down. I have a feeling that it could have something to do with the card Quadro. I hope this isn't, because I use the engine for raytracing in AE.

  I myself joined midi CS6 Production Premium yesterday. I wonder if this could be related, since AE ties into several pieces of third-party softwarelike Mocha AE (that I opened) after registering CS6. I did other software/hardware changes lately.

  A new installation of Lion, fate has been incredibly fast and stable so far. I was wondering if it might have to do with the disk cache, because I was doing a ton of rotobrushing, 3D tracking and precomped raytracing leading to it, but it happened now in Photoshop too. (My cache on disk is set up on my fiber RAID)

  The crash in AE is not specific to my project, although he started a CS6 project's got very, very complex. I can open it create a new project, up a solid in and start messing around with it and in a minute it blocks the Mac.

  Someone saw something like that? I'll try to unplug my Quadro then and see if it happens again.

  Material:

  Mac Pro 4.1 (2009)

  Two screens 24 "Apple LED

  NVidia Quadro 4000 (first slot, 1 display)

  NVidia GT120 (stock # second slot, 2nd screen, Apple card)

  2 x fiber Apple Xserve RAID-5 (3.5 to each)

  24 GB of RAM (6x4Go in slots 1-3 and 5-7, as recommended for MP 4.1)

  Software:

  Clean install of 10.7 Lion (I did this 3 weeks in preparation to the CS6), updated through 10.7.4

  CS6 Production Premium (with x.0.1 updates)

  I don't have Mac upward in front of me right now to list the drivers NVidia and CUDA, but I installed them fresh from the web three weeks ago, and I checked the updates yesterday.

  Too bad, all the world. I just had this accident happen outside of Adobe applications. I started in Snow Leopard 10.6.7 (on my other startup disk) and did some work in DVD Studio Pro. Finally he gave me the same accident. While Adobe applications certainly trigger the problem immediately, so it is apparently specific to Adobe.

• GPU Quadro 4000 installation on HP pavilion Desktop m9540ch... Worried about the power specification

  Hello

  I want to install a card nvidia quadro 4000 graphic on Hp pavilion m9540ch desktop PC. I opened the desktop chassis and I found that there is no auxiliary 6-pin power connector coming from the power supply. I'll buy this connector 'double 4-pin Molex-8 pin PCI-E adapt' to provide power to Quadro 4000 GPU. Now, I wonder if my power (300 W) can support GPU (80W). My question is, how can I see or know the average power consumption of my Hp pavilion m 9540ch PC? Is there a document which can explain the total power consumption of this PC or there at - it a utility to monitor the total power consumption on windows 7?

  Thank you very much in advance for your suggestions and comments.

  Hello

  Thanks for the solution. It worked well.

  Best regards