Satellite M30 - Error IRQL_NOT_LESS_OR_EQUAL

Similar Questions

• Satellite M30 - error message after replacing the DVD drive

  Virgin, excused my English ;)
  I have a satellite m30 and I replaced the DVD-cd-rw drive in series with a SLIM NEC ND-6650 DOUBLE LAYER, DVD time bios gives me error
  0203: failure IDE #2
  Is it possible to remove this message?

  Hello

  As far as I know that this message can not be eliminated and it happens every time if you want to use the drive is not compatible. Always is it that all readers may not work with all models of laptops.

  In this case, fundamental problem is the pin assignment. It is not the same in all players.

  Good bye

• Re: Satellite M30: error HARD drive-> 40 GB HDD modified with a 250 GB = 137 GB HARD drive?

  Hi all
  I have a problem with my laptop M30-241 and the new hard drive.

  After an error with my old 40 GB HARD drive, I changed HDD WD 2500BEVE 250 GB.

  The correct name of the HARD drive in the bios Setup.
  My bios version is 1.7 but only 137 GB of available space.

  I searched for a new version of the bios, but without success.

  Maybe someone can give me an opinion/advice?

  Best regards
  D.a.

  Perhaps the BIOS doesn't support the 250 GB HDD it is possible given that not all HARD drive sizes are supported!
  I think that the update of the BIOS (if possible) would not solve this too.

• Satellite M30: Error 0x47F after installing energy-saving

  After you have installed the Toshiba Power Saver message: 'error 0x47F' appears. And the energy saver does not work. The error after each reboot Message apears, too. I tried to reinstall the energy saver, but I'm not helping. Uninstall is impossible, since WIN XP (SP2) the same error message appears or says: cannot uninstall because it lacks file... / Uninst.exe.
  What should I do?

  Hello

  I assume that you have not used you delivered Toshiba recovery CD but only the original CD of Microsoft. However, you should check the forum for similar issues. There are several announcement about. You can use the "advanced search".
  It seems that there is no explicit solution for this stop error message. In most cases, the unit with the supplied Toshiba Recovery CD recovery have solved this problem.
  In this case, you should check for this possibility.

• Satellite M30: Problems install Power Saver - fatal error has occurred

  7.0.0.3 for something Satellite M30.

  After setting up, I get a "fatal error occurred. The program took end code ox2.

  Any ideas on whats wrong?

  Hello

  I put t know exactly what's wrong, but I remember these problems might appear if the drivers, tools, and utilities are installed in the correct order.
  The installation instructions document is no doubt placed on the page of the Toshiba driver.
  I recommend that you check these documents

  But why you don t use the Toshiba Recovery CD. This CD allows you to install the operating system with all the necessary tools and drivers much faster and easier.

• Satellite M30: Unknow Hard Error - could this be a problem of hard drive?

  I got my Satellite M30 for 2 years now and it never gave me any problems, until a few weeks ago. The problem started shortly after I put Windows to SP2, when I played a game it would stick for a minute or two, and then continue on as usual, the problem slowly got worse and started blue screening with "Unknown hard error" and sometimes strange balloon in the lower right corner saying unknown hardware error and then freeze it. It also took a long time to start and generally do nothing.

  Assumed it was a problem when I've upgraded to SP2, so I decided to reinstall Windows and start over again, update the BIOS while I was home.

  Once this is done it seemed fine for an hour or two, but then tried to install a game and of course, the good old blue screen appears and the whole problem starts again.

  I took it to a repair shop and explain the problem and I had re-installed Windows nothing helped, and I suspected that it may be a hardware failure, I left it with them, and 2 days later I get a call saying its all fixed and ready to be picked up, I asked what was wrong with it and they said that they re-installed Windows and sound now works fine (i.e. what I their) I said, I had made and n t worked!). I picked up (and got charged £40 to have done what I had already done). I got it home and everything seemed ok... for a few hours, then blue screens seemed to tell me any physical dumping of beginning and the usual stuff.

  I think it might be a drive problem hard, like when I tried to install a game on it at night last light CD and HARD flash drive, one for about 15 seconds, then the other for a short time, data copied from one to the other, but then the HARD drive light stayed on, and I could hear the HARD disk as if it were sticky , after about a minute of this blue and close short-listed and took some time to turn back. If I leave a couple of hours and it starts fine until the next time.

  So, after my long description on my problem, I have 2 questions,

  1. could I be right in thinking that these problems are associated with hard drive?
  2. If I'm right, is easy to replace on the M30 HARD drive and where I would buy a new?

  Thanks for your time and help,

  Kenny.

  Hello

  The blue screen appears only if you play games?

  But I agree with you. In my opinion, there would really be a hardware malfunction.
  The question is - it s a HARD drive or something different?
  Hmmm. I think that the problem is not related to the disc HARD but maybe overheating?
  According to the publication, sometimes when you play games. The game is a high performance application. All devices running with maximum performance and produce heat.

  I m not 100% sure, but maybe the high temperature has a bad influence on the system and therefore the BSOD happens.
  You suggested that the laptop run properly for about 2 years. Maybe fans can cool properly because of the dust and debris. Two years is a long time if you have not cleaned the cooling modules and fans.

• Satellite M30, partitioning

  After that I got some error messages and viruses so I had to format my laptop the Satellite M30.
  I used the recovery CD Toshiba 2 and the only option for me was Option 1 Option 2 is reserved for specialists, and I'm not familiar with all the terms it. In any case, the formatting not only formatait the C:\ but D:\ thus merged the formerly 2 x 30 GB in a single C:\ partition, I had no option to stop this.
  How can I split my C:\ drive again into 2 partitions of the same size?

  Sorry, but the only way with the delivered software on a M30 to create partitions is the expert mode.
  As far as I know.

  But I have a proposal.

  Tomorrow I'll do a recovery on my M30 will inform you as soon as possible.

  Good bye

• Satellite M30, Intel pro WLAN 2100 3B mini PCI adapt does not

  Hello
  I bought a satellite M30 a week ago. I used the wirless lan a few times. Now I rebooted the computer after that the wireless network adapter no longer works. In the properties of the device, there is error code 10: impossible to activate the device.
  I tried to uninstall the device and installing again, but it did not work.
  Do you have any suggestions?
  Thanks in advance

  Alberto

  Hi, congratulations on your Satellite M30!

  Cold machine. Well I'd keep it very simple. Redefine your laptop to factory settings (Simple recover using the CD or the DVD delivered).

  If the won´t still card Wifi works, there will be a material damage on your laptop.

  Please let the dealer take a look on your machine.

  Good bye

• Satellite M30: Cannot use COM with the Modem port

  Hello

  I have a satellite m30. I have problems with the com port to use with the modem. I get an error code saying 12 resources etc. There is no i/o or IRQ conflict IRQ 04 and e/s beach is 03F8 - 03FF. I tried to uninstall various things to free resources, but still the same error.

  Any help would be greatly appreciated.

  This problem when you use the Toshiba Recovery CD?
  Try to disconnect all the external devices and install Windows from the Toshiba restore CD.

  Additional please check several comments here in the forum area Modem. I found several threads with similar issues

• Satellite M30 restart

  Hi all

  I have a Satellite M30, which, after a few years of loyal and troubled, free service began to take a few minutes to start. I tried to fix this using the product recovery discs but can get no more than the screen asks me to insert the disc 1. After a few minutes of a blank screen, there is a beep and an 'error' message.

  Can t really afford a new laptop and I'm a little worried about buying a 2nd hand, so this is my last hope.

  Read what people are saying in these forums, I feel out of my depth and probably wont be able to understand all the answers that come my way. But if someone have any ideas then please let me know. Thank you. getcarter

  P.S. I was in a curry the other day looking at all the laptops I could t afford, when I heard someone who brought a Toshiba and seemed to have the same problem. Unfortunately, the Currys staff didn't have much of a clue and could only think of hitting the 'C' button over and over and over and over again!

  As far as I know Satellite M30 comes with 2 recovery CD (1/2 and 2/2).
  The recovery procedure must be started with CD1/2. Check this and that!

• No satellite M30 604 no display & beeps at startup

  When I turn on my Toshiba Satellite M30 604, there is no display and it is 1 long beep and 2 short beeps

  I know that is not the problem of memory, because I replace it.
  When I remove all memory other beeps can be heard.

  Anyone know what the beeps.

  What can I do?

  I think the beep code is a graphic chip problem. My other laptop (not a Toshiba) gave the same error beep, I had to replace the motherboard.

• Can not turn on the Satellite M30

  Hello everyone...

  I have a Satellite M30 laptop for time enough and I'm having a problem with it. When I try to turn it on, it makes a kind of scratch noise and then nothing happens. The hard drive lit wrath but the computer does no sound and no picture on the screen. I tried to turn it on with and without the battery and the same thing happens.

  A few days before this happened that I could see the windows startup screen, after that the computer crashed, even when I went to the BIOS Setup screen, the computer also crashed, so the problem was not on the hard disk. A few days later, when I tried to turn it back on, it makes a single probe and nothing else happened. Can it be a motherboard problem? can I try before sending it for repair

  I'm scared of m it s a serious problem.
  Depending on the symptoms that you described the laptop cannot get the message and so I think there may be an error on the motherboard.
  I don t think you will be able to locate the fault. It is simply not possible for the common user like you and me

  If you have no choice as to the request of the service provider for Toshiba for help.

• Ports COM1-4 'missing' Satellite M30

  Hello, communication ports (COM1-4) series of my sound of portable Satellite M30 suddenly "disappeared", or, at least, Window XP (Home version) is unable to detect them - through the management of resources or similar tools of surveillance - only parallel port (LPT1) is reported.
  Problem is that the modem (internal standard) (by default on COM3) is unable to work. Modem seems ok - at least according to Windows - but, as you can guess, it cannot accept AT command (and therefore start up).
  Everything else seems to work fine - including the Infrared Port, which should work, by default, on COM4? and mouse Touchpad. No problem i/o and IRQ address is detected on the other peripherls.
  Only the system serial port driver (serial.sys) is alarmed that unable to boot because.
  ..??? .. Even thought a hardware problem - ex.electrostatic discharge or similar? - but a couple of days ago the modem starts unexpectedly and worked correctly for long enough - even if with the COM ports still without being detected by Windows - but after connection went down and modem could not start (Error 633: modem, a device already in service or other problems of configuration...).
  .. Before proceeding to more annoying (and probably expensive) actions - such as reinstalling Windows?... or looking for a repair center - I wanted to try to replace the driver (serial.sys) series, but I was unable to find it-in the CD provided with the product or on the Toshiba site. Where can I find it?
  Other suggestions?
  Thank you

  Hello

  Don t look for serial port drivers. These ports are using simply common Microsoft Windows drivers!
  According to your description there are different problems with different internal devices.

  If all goes well it of not a hardware problem?  :|

  So in my opinion we must first know if it s a software or hardware problem.
  In this case you take your original Toshiba Recovery CD and must be reinstalled the operating system.

  Note; the whole HARD disc will be fomrated and you will lose data. So, don t forget to back up your data.

  If the new installation of the operating system didn't help any, and you will always receive error messages the technician must check the laptop!

  Good luck

• Satellite M30: Lack of reader DVD-CD ROM D:

  MY COMPUTER SATELLITE M30 IS MISSING, perhaps DAMAGED, the EQUIPMENT RELATIVE to the UNIT DISC DVD-CD. I TRIED TO CANCELED AND REINSTALLED, BUT THE MESSAGE FOLLOWING ERROR APPEARS: "DVD-CD ROM UNIT NOT CONNECTED." SO FOR NOW I HAVE C: DRIVE UNIQUE FIXED WHERE TO FIND HARDWARE AND DRIVER?
  I USE A MAT * A UJDA 750.

  Hello

  If the drive is not listed in Windows Explorer can you please let us know what status a CD/DVD drive in Device Manager (is there an error message like code-xxx)?

• Sporadic satellite M30-304 USB failure mouse

  Have the laptop above under XP. After that 2 years running a mouse USB laser without probs, suddenly the pointer stops for a few seconds, then takes over again, stops, starts etc. Very maddening. There is an error message saying every so often the device connected to the USB port is not installed correctly.

  I uninstall the software for the mouse and the re - install, run all my anti-virus software and Tracker, still the same problem. the trackpad still works fine, so I decide it takes the mouse and buy a new one and install it. It worked fine for a few weeks now, so today the same problem!

  Did he have the same problem or know a solution?

  Hello

  I don't use a Satellite M30 but a Satellite M40.
  I use it for a year and I have no problem with my mouse.
  I can't believe that the laptop has a malfunction, because as you say in your announcement of new mouse worked initially.
  I have no idea why your mouse pointer stops. Maybe the mouse driver causes a strange failure.
  You can also try to remove the shape of USB ports, Device Manager.
  After restarting again the operating system should recognize the USB ports again with a standard configuration.
  Then, you can try to reconnect the mouse.

  You can also try to use the mouse without having to install the drivers for mouse manufacturing delivered. Check it out